Big brake upgrade for the IS300! LS400 brake conversion ultimate guide

Рет қаралды 41,967

5 жыл бұрын

Upgrading the brakes of the Lexus IS300 to the LS400 has become a popular upgrade and Freddy shows you step by step on how to powder coat, rebuild and install the LS400 brake calipers in this ultimate step by step guide!
LS400 Brake Calipers
amzn.to/2r99ZqY
amzn.to/2E1VKfI
LS400 Caliper rebuild kit
amzn.to/2zuoMAN
LS400 Brake Rotors
amzn.to/2TPBTFs
LS400 Brake Pads
amzn.to/2TPBTFs
Braided brake lines
amzn.to/2KEJbYc
Threaded calipers adapters
rankoneperfo...
RCAs
www.autosportsengineering.com/...
Line wrenches
Eastwood blast cabinet
www.eastwood.com/eastwood-ben...
Eastwood brake bleeder
www.eastwood.com/eastwood-bra...
Eastwood powder coating gun
www.eastwood.com/dual-voltage...
Eastwood light kit
www.eastwood.com/eastwood-mod...
Support PMM by shopping through our store: ►astore.amazon.com/mctr-20
►FAIL playlist: • That's not supposed to...
►1JZ Supra Drift Missile Build Playlist: • Drift Missile Build Pt...
►Altezza IS300 Mods: • Sway Bar Upgrade IS300...
►AE86 Corolla GTS Resto-Mod Playlist: • AE86 Corlla GTS RestoM...
►240sx S13 Playlist: • Engine rebuild KA24DE ...
►Turbo Sentra SpecV Build: • How to Install 2-step ...
►Subaru Impreza RS Legacy GT Mods • The Ultimate Sleeper E...
Tools I LOVE
►BADASS Screw Drivers: amzn.to/2dQ5Ajx
►Amazing Electric Ratchet! amzn.to/2e1E1qS
►Pivoting Ratchet: amzn.to/2eL1n4V
►Awesome Cutter/Stripper/Crimper amzn.to/2e1ExoA
►POWER PROBE amzn.to/2dMGS8g
►Ratcheting Wrenches amzn.to/2dME8I2
Equipment I use
►Welder: amzn.to/2dQcftY
►Camera: amzn.to/2fbMs5s
►Microphone: amzn.to/2fkdnez
►Tripod: amzn.to/2e1IgCC
The Auto Alliance:
/ 00labjapan00
/ projectgarageonline
/ biggamehitt
/ eletor
► / pmmods
► / poormanmods
► www.poormanmods.com
Music by: / nocopyrightsounds

Пікірлер: 182

@215fireblaze 4 жыл бұрын

Lots of good, specific information. Love it!

@Korkoooo 5 жыл бұрын

Finally an in depth video on the LS400 BBK!!! I saw your post on one of the Is300 FB groups. This will help me out a ton. Thanks Freddy!

@PoorManMods 5 жыл бұрын

Right?! There is a ton of info on this upgrade all over the internet, but it's all scattered and not in one place, so i felt the need to make a one stop shop for all the info :)

@brandedmustang 5 жыл бұрын

dude love your videos keep the is300 content coming

@PoorManMods 5 жыл бұрын

Thanks!

@Hewey 5 жыл бұрын

This is one of the best videos you have put out in a long time, getting fired was the best thing to happen to your KZfaq channel since you got the Supra.

@PoorManMods 5 жыл бұрын

Hahahaha! Thanks!

@chouher94 5 жыл бұрын

Great tutorial video! Got my LS400 at a you pull you save for $40. Sanded them down and sprayed it the burnt copper color. Now I hope to get the things I needed to install them this year.

@PoorManMods 5 жыл бұрын

Yessssssss

@carlosalbertobecerrapombo1087 5 жыл бұрын

Wow!!! great job, many smart ideas that i never thought it could be done in a basement, keep it up, greetings from Colombia.

@PoorManMods 5 жыл бұрын

thank you!

@samh2259 5 жыл бұрын

I got LS400 calipers for my SC300 last year at Autozone for under $300 after core refunds. They were already rebuilt and ready for paint. Saves a little time on a rebuild and cleanup. Best investment you can make for a SC/Soarer

@alphadog6114 2 жыл бұрын

Did you have to get spacers

@samuelhansen8518 2 жыл бұрын

@@alphadog6114 nope. But I ran Supra wheels so maybe you would need to upgrade wheels if you’re on stocks

@danielgalan6518 4 жыл бұрын

Keep up the good work! You're page is marvelous for DIY stuff!!

@PoorManMods 4 жыл бұрын

thank youuu!

@thomashemmy925 2 жыл бұрын

Same applies to 2gs/Aristo platform. Thanks for another helpfully vid!

@PoorManMods 2 жыл бұрын

Thanks for watching!

@FZERO20 4 жыл бұрын

That idea of using the filter behind was really cool. I'll use that. Great video btw

@PoorManMods 4 жыл бұрын

Thanks!

@Jackstinn 4 жыл бұрын

Thanks for this upload. Got mine at junkyard $40 a piece. Love the shirt

@PoorManMods 4 жыл бұрын

Thanks!

@DylanTK 5 жыл бұрын

awesome work Freddy; sure to make quite the difference

@PoorManMods 5 жыл бұрын

Thank you they feel great!

@andresutherland4306 5 жыл бұрын

We want more! we want more! Dope video homie thanks.

@PoorManMods 5 жыл бұрын

Thanks! what do you want more of?

@offshore_salty_gear3377 4 жыл бұрын

All that good stuff berry helpful 🤙🏻

@2jz_adventures 3 жыл бұрын

Awesome video everything I need to know right here

@kevinc9934 3 жыл бұрын

great video man, thanks for sharing

@teamlegendarysanmarcos3693 3 жыл бұрын

Great video keep it coming 😁

@thlee3 4 жыл бұрын

Great content!! Thank you for posting!!

@PoorManMods 4 жыл бұрын

Thanks!

@TheSavageGarage 5 жыл бұрын

Great video mate!

@PoorManMods 5 жыл бұрын

Thank you!

@jaimegomez4538 5 жыл бұрын

great job friend im doing it for sure !!!!

@vincentfontanez9334 4 жыл бұрын

Cool men! Looks great.

@Shwalker07 5 жыл бұрын

Those turned out great.

@PoorManMods 5 жыл бұрын

Thanks!

@lennex04 4 жыл бұрын

Hey man. Love all your videos. Keep it up! By the way. I'm in the process of doing this brake upgrade. But as of now I only need my wheel spacers. Do you think u can send me a link to some safe wheel spacers. Or the ones u purchased

@adrianjimenez7918 3 жыл бұрын

We need more men like you poor man thank you

@PoorManMods 3 жыл бұрын

Haha thank you

@mariospantouvanos4645 5 жыл бұрын

The calipers are Sumitomos. Not Brembos, but that's ok. Moe stopping power is always nice to have.

@PoorManMods 5 жыл бұрын

Thanks!

@glasser2819 5 жыл бұрын

Japanese quality is king 👍🏻

@jdm_eh9367 5 жыл бұрын

@@PoorManMods hey man, I have an MA70. Do you think the 4 piston calipers can be installed on my car?

@carlbrooks90 3 жыл бұрын

a much better affordable option. i might consider this in the future

@josephmanna9082 5 жыл бұрын

Cool video bro

@PoorManMods 5 жыл бұрын

Thanks

@robertlee1176 2 жыл бұрын

Soooo....just found my new fav channel

@PoorManMods 2 жыл бұрын

Hell yeah thank youuu

@shizukesajdm 2 жыл бұрын

Really awesome video! Did you use the anti squeal shims?

@zakkrick 4 жыл бұрын

I’ve seen a few Ls400 at Pick n Pull with the front brakes are still there, I could get them for less than 150 for both

@alphadog6114 2 жыл бұрын

I got my pair for $40 at my local yard

@shodmermaid3365 4 жыл бұрын

Just picked up my OE calipers from a 98 for 60 bucks for both. I going to try to use an angle kit to work as my RCA's, that way I get two in one lol. I've heard the angle kit is just thick enough

@haroldguillaume9006 5 жыл бұрын

Great video

@PoorManMods 5 жыл бұрын

Thanks!

@DJJAW11 2 жыл бұрын

... What calipers would you recommend for the likes of Toyota zze123 Corolla?. Running stock t sport discs/rotors, or a little bigger,under 16" wheels?. ( I actually have some Rx7fd calipers, but would need to use bridge spacers a few mm). And a single Porsche Boxster rear monoblock,I picked up cheap). It would be nice to use monoblock sumomoto,from a lexus ls430 etc. But I fear could be a little big!.

@jicez6649 5 жыл бұрын

Great video, what is the cost for the rank one caliper adapters?

@Mr_ButtBuster 4 жыл бұрын

What year of the ls400 calipers are compatible with the is300? I know we need rca adapters and all, but I heard only 1995-2000 ls400 calipers work, idk why though, but in this vid, the calipers are from a 1994?

@BjornFSE 5 жыл бұрын

great to see these types of videos again. the MK3 Video is legendary informative and excellent all around. do MK4 next if you got friends doing poorman bbk.

@BjornFSE 5 жыл бұрын

ps, I hit like before I even watched. thats a cool bleeder tool. first time seeing something like that. #interesting

@PoorManMods 5 жыл бұрын

thank you! there is a link in the description to the bleeder tool you should invest in one.

@jzshifter 4 жыл бұрын

Hi I’ve seen a lot of stuff about the ls400 calipers upgrade but very little on the stopping difference compared to the stock brakes. Can anyone shed some light on the difference in stopping power ? Great video Freddy was very detailed and easy follow 👍🏼

@pumaot7261 Жыл бұрын

Very self explanatory, 1 piston versus 2 pistons, faster stopping, used for more power cars or canyon racing cars

@rexracer7192 7 ай бұрын

No brake upgrade will drastically change stopping distance. The upgrade only decreases brake fade helps pedal feel stiffer, it just helps them not get hot as fast. Tires and suspension will decrease stopping distance more than a brake upgrade, but together they are like pb&j...

@jadenjones9877 4 жыл бұрын

Yo Ik people use 17mm rcas when they do this I’m looking to shorten my spindles in the future and wanted to go with the 30mm rca setup with shortened spindles do u think I’d run into much of an issue running the stock spindles and 30mm rca for the time being?

@arturomarquez8803 4 жыл бұрын

Nice T-shirt brother

@geovlogss 3 жыл бұрын

You should have done all the seals & etc before powder coating the caliper wouldn’t that be easier so you wouldn’t mess up the paint with brake fluid?

@JoyLong 3 жыл бұрын

Do you need to get alignment? Did you get an alignment? Also, when you bleed the brakes, did you just only bleed the fronts? Rear?

@alphadog6114 2 жыл бұрын

Does the same rule apply for the adapter bracket with SC300s?

@projectfast_is2634 5 жыл бұрын

Could you do a rear brake upgrade?

@japlanningaltezza4621 2 жыл бұрын

Do the abs speed sensors fit and bolt right up to the ls400 calipers ?

@pavelrodt6404 4 жыл бұрын

good shit brother ... thanks a lot

@PoorManMods 4 жыл бұрын

Youre welcome!

@scott-michael812 5 жыл бұрын

I had no idea powdering equipment was so cheap. The first system that popped up on Ebay is 90 dollars. I really want to do my wheels.

@PoorManMods 5 жыл бұрын

I wouldnt get an ebay. Get the eastwood kit for a few more dollars, its worth the insurance

@pluto.876 3 жыл бұрын

Just scored on a pair for $50 ordered brand new hardware to fit when I clean them up

@MilitiousJ 3 жыл бұрын

So if the RCAs drop the front an inch...what about the rear?

@swapitout5728 4 жыл бұрын

Isn't there a way to separate them to make the rebuild alil easier?

@alexklejka7836 Жыл бұрын

The link for the RCA’s is broken. What size did you use here?

@182007chris 5 жыл бұрын

What size rca did you use ? 17mm or 30mm ?

@DanielTheMagicBum 5 жыл бұрын

Great video, informative as fuck like always. Glad you didn't get rid of the is300

@PoorManMods 5 жыл бұрын

Thank you! Haha

@vadimskalnacs2074 3 жыл бұрын

Hi. Where can i get all that adapter kit?

@peterfalken2498 Жыл бұрын

Is true the rear set with just bolt on?

@ahs9583 4 жыл бұрын

How much did u pay for the threaded calipers adapters?

@Chambers45 5 жыл бұрын

Awesome!

@PoorManMods 5 жыл бұрын

Thank you!

@sticklordof 3 жыл бұрын

I’ve got 17x9 rota fighters ,think offset is Et35... reckon they’ll clear the callipers?

@PoorManMods 3 жыл бұрын

I truly have no idea, im not good with wheel specs lol, sorry.

@chrisej207 5 жыл бұрын

I just realized I didn't lube my pistons+ o-rings after rebuild.. this going to be a problem?

@PoorManMods 5 жыл бұрын

I honestly dont know

@damiens1998 2 жыл бұрын

did u put wheel spacers on the rear too? planning on doing this swap when i replace all my struts and i wanna make sure my suspension is still square

@PoorManMods 2 жыл бұрын

lol no i actually just spaced the front but wheel spacers dont affect alignment

@Csomethingrad 4 жыл бұрын

What size of rca did you use? The website has a choice of 17mm & 30mm. Do you know what the size different affects?

@PoorManMods 4 жыл бұрын

30mm

@rexracer7192 7 ай бұрын

Do the ls400 spindles fit the is300? I know they look they exact same.

@PoorManMods 7 ай бұрын

I'm not sure

@chrisherbert5052 5 жыл бұрын

Did the same conversion to my soarer. But it’s a direct bolt on

@PoorManMods 5 жыл бұрын

Niceeeee

@ucandiy9063 2 жыл бұрын

Can it work on the is200?

@socrittylove 2 жыл бұрын

When you put the spacers on did it affect your turning radius? For some reason my driver side wheel is rubbing against the back of my wheel well preventing me from getting a complete turn.

@PoorManMods 2 жыл бұрын

the spacers lower the car about an inch, thats probably why youre rubbing

@socritty 2 жыл бұрын

@@PoorManMods that’s not the issue I’m speaking of. My wheel is touching the back of the wheel well. It’s preventing me from getting my full turning radius.

@PoorManMods 2 жыл бұрын

@@socritty dang I have no idea what's causing that

@luisorellana669 3 жыл бұрын

How can I convert from premium to e85

@R.O.A.P. 3 жыл бұрын

I just want to know what big brakes I can put on the rear

@PoorManMods 3 жыл бұрын

im not sure, but honestly i really dont think its necessary

@JgE1995 2 жыл бұрын

Any master cylinder upgrades needed to keep decent pedal feel?

@PoorManMods 2 жыл бұрын

nope!

@gsgcarreviews 3 жыл бұрын

BADASS

@PoorManMods 3 жыл бұрын

Hells yeahh

@gsgcarreviews 3 жыл бұрын

@@PoorManMods have you noticed an actual difference in braking power? I've read somewhere that it feels the same as stock

@PoorManMods 3 жыл бұрын

To be honest i did not do this for improved breaking performance. You can only stop as quickly as your tires and ABS will allow you and my crappy all seasons were over powered by the stock brakes, so this upgrade really yields no benefit in stopping power in my situation. That being said, the only reason i did this swap was for reliability. I went through 4 or 5 sets of front calipers because the pins and brackets kept seizing and warping my rotors. This 4 pot calipers dont have pins and brackets to lock up. Potential improved performance and a cool look are just a bonus

@nzy604 2 жыл бұрын

anyone know where to get RCA kits besides ebay now?

@Mr.grubby 3 жыл бұрын

What size offset wheels do I need for it to clear these brakes

@PoorManMods 3 жыл бұрын

I run OEM wheels with a 10mm spacer

@BrowardWayD 2 жыл бұрын

I have a dumb question do you have to use ls400 rotors??

@PoorManMods 2 жыл бұрын

Yes

@bigalbranim614 5 жыл бұрын

Your self control with break clean is impressive, you must save thousands

@PoorManMods 5 жыл бұрын

Lol thanks

@suxelzjowt2093 5 жыл бұрын

im fucking dead.

@Projekt5.3 4 жыл бұрын

Hey man just a tip, turn your air pressure on the powder coat gun WAAAAY down. It is dumping so much powder that is all being wasted. You want like a fog effect

@PoorManMods 4 жыл бұрын

Ill try thanks!

@suxelzjowt2093 5 жыл бұрын

subscribed.

@PoorManMods 5 жыл бұрын

Thanks!

@MRMAN-wb1tv 2 жыл бұрын

*So can I have you rebuild, sandblast, and powder coat my calipers?*

@PoorManMods 2 жыл бұрын

Maybe, shoot me an email poormanmods@gmail.com

@AlexPanagos 2 жыл бұрын

Can you use any year LS400 caliper?

@PoorManMods 2 жыл бұрын

I'm not sureee

@giovanivillarruel943 2 жыл бұрын

Hey man I have a question. So I installed mine and my brakes squeal a lot and I have no idea why. What should I do to check or make sure nothing is bad. Everything was pretty much installed correctly and the car drives and breaks fine only problem is the insane amount of brake squeal

@PoorManMods 2 жыл бұрын

Performance pads squeal

@sidewayzking13 10 ай бұрын

I have been having the same issue, no matter what pad I try. Let me know you resolved your issue. Been dealing with squeal for 2 years now and it gets embarrassing haha

@DynamicEvolved 5 жыл бұрын

I bought the LS400 fronts to replace my J-Spec Supra MKIV ones. Love em.

@PoorManMods 5 жыл бұрын

Yup!

@mr.cangieter8758 5 жыл бұрын

What are the benefits over mkiv calipers?

@DynamicEvolved 5 жыл бұрын

@@mr.cangieter8758 MKIV NA brakes are a 2 piston slider design (2 pistons on one side of the disc) and don't have great clamping force for turbo cars. Mine was originally NA, now a 500bhp 1JZ-GTE and needed to upgrade the brakes. MKIV TT brakes are a 4 piston design (2 pistons on each side of the brake disc) and have great clamping force for turbo cars. The LS400 calipers are also 4 piston (2 pistons per side of brake disc) and have just as good of a braking clamp force for a lot less money than a set of TT calipers.

@mr.cangieter8758 5 жыл бұрын

@@DynamicEvolved AutoZone has Supra mkiv turbo calipers pretty cheap. Never looked into the lS400 calipers. Thanks.

@raymondlong99 5 жыл бұрын

Will this method work on my gs300 tho?

@PoorManMods 5 жыл бұрын

I dont know

@joshalvarez03 5 жыл бұрын

dude great great great great fucking video. From beginning to end. Can i do this to a 2001 lexus gs300?

@PoorManMods 5 жыл бұрын

Thank you! I'm not sure

@louietabullo208 4 жыл бұрын

Just got my set from a 00 LS400 for my GS300 for $42 the pair! Question, does the GS need thread adapters?anyone know?

@Dr_Boost 4 жыл бұрын

Hey , did you install them? and if yes , Did you need the thread adapters ?

@louietabullo208 4 жыл бұрын

@@Dr_Boost www.clublexus.com/forums/suspension-and-brakes/428482-installing-ls400-calipers-on-my-gs300-4.html I still haven't installed them due to no time. This is the last thread that I was reading and it looks like you might just be a straight bolt on and just install RCA's

@louietabullo208 4 жыл бұрын

And of course ls400 rotors and pads

@Dr_Boost 4 жыл бұрын

Louie Tabullo i am afraid to get the rca because i have a JZS155 i bought the calipers i will try to test fit them soon and will se

@mikelima2795 2 жыл бұрын

Breakfluid eats EVERYTHING LOL

@PoorManMods 2 жыл бұрын

I knowwwwww

@rohanwehby2059 4 жыл бұрын

Do I have to use the rotors from the la 400 also?

@japandrz 3 жыл бұрын

Yes. LS400

@FrequencyOfRelaxation 3 жыл бұрын

@@japandrz what year rotors? I’m using 95 ls400 but it’s rubbing the caliper and the holes not lining up to bolt the caliper in. Do you have any tips? Thanks

@trevine33 5 жыл бұрын

never wipe brake fluid. just wash the affected area with cold water.

@profuse007 5 жыл бұрын

The caliper iron or aluminum?

@PoorManMods 5 жыл бұрын

Aluminum

@ZOK08 3 жыл бұрын

This guy is a fuckin GENIUS

@PoorManMods 3 жыл бұрын

😘

@I.S_Lombrana 5 жыл бұрын

What about the back? Or does it not really matter

@PoorManMods 5 жыл бұрын

Doesn't really matter

@xSiloh Жыл бұрын

Are the RCAs is300 or Ls400 ?

@PoorManMods Жыл бұрын

is300

@rashamwilliams8782 3 жыл бұрын

🇹🇹nice shirt

@rondhole 4 жыл бұрын

Thanks for clear video. But Unnecessary replacing reliable Toyota rubber hose and piston. Also lubricating bolts in brake parts are not well thought. you putt thread lock instead

@GuyMahoney 4 жыл бұрын

WD40 isn't a lubricating oil, try silicon or teflon grease.

@Faizanrana600 5 жыл бұрын

Does ls400 work on mk3 supra?

@joshalvarez03 5 жыл бұрын

why would u go ls4. u have a supra. Go Supra!!

@Faizanrana600 5 жыл бұрын

@@joshalvarez03 lol. I am talking about brakes not ls4.

@joshalvarez03 5 жыл бұрын

@@Faizanrana600 still why would u go ls4 brakes on a supra. like i said you have a supra go supra brakes not ls4 lmao

@Motorsportsgeek 5 жыл бұрын

Rebuild them before painting and just tape up the piston.. Working on a freshly painted caliper is just a bad idea, specially if it involves brake fluid.

@PoorManMods 5 жыл бұрын

Rebuild them before you paint absolutely, but not powder coat. Baking them at 425 degrees for 20 minutes might hinder the integrity of the seals and boots. Not a risk im willing to take, I dont want to install them find out they piss fluid when you press the pedal.

@Motorsportsgeek 5 жыл бұрын

@@PoorManMods Right, I forgot about the cooking, I guess just tape them up while you work on it, good info!

@PoorManMods 5 жыл бұрын

@@Motorsportsgeek yeah i guess you could tape them up or try to wrap them in plastic or something. I will certainly try doing some kind of protection in the future

@jasonnewsome8211 5 жыл бұрын

Hey bro could we talk on the phone

@snuttis91 5 жыл бұрын

Brakefluid ruins paint, always..

@PoorManMods 5 жыл бұрын

I know..

@SuperSreggin 5 жыл бұрын

Everyone will go and tell you that they fit but they don't you need to get a shop to press out the old adapters to put the new ones in don't listen to a poor man's mods his stuff is fake

@PoorManMods 5 жыл бұрын

Everything you need to do with the parts i used i did in this video

@SuperSreggin 5 жыл бұрын

@@PoorManMods torched that bitch 5 times and hit it with a sledge hammer and air hammer doesnt move I call it fake. Thank you and all other guys who failed to mention that very important park fucking unbelievable.

@PoorManMods 5 жыл бұрын

I have no idea what youre talking about. This video is an exact step by step with the parts i used.

@PoorManMods 5 жыл бұрын

Go ahead and watch the video from 8:50-10:00. So fake...