In this video ninja uses the little stick Trowel machine on a big driveway check out and see how she goes . If you are interested in getting one of these stick trowel machines go to www.MasterFinish.com.au
Пікірлер: 61
@roybelisariojr.22373 ай бұрын
I had mine for 10-12yrs runs perfect and I use it for everything to tighten up that concrete Beautiful finishes
@VenturiLife5 жыл бұрын
Look at that little thing go! Great result.
@christianszell68693 жыл бұрын
This was done with great passion !
@kkkimakaze5 жыл бұрын
Awesome job mate, made that descent drive look easy even with lil pup of a chopper
@concreteninja5 жыл бұрын
Kimakaze Holt Thanks mate I was pretty easy day 👌👍
@benhunt22515 жыл бұрын
That chopper looks smooth mate
@ericcustis60545 жыл бұрын
you guys do great work
@Majorfarter4 жыл бұрын
We put heaters underneath the pours you should see the amount of heat propane and just energy in general extra is used when we pour we also add 2% accelerator you walk to the job site bundled up go inside and strip down and that is if you’re lucky to be inside-Detroit finishers union
@antoniolozada95162 жыл бұрын
Good job buddy.
@kgdcontracting39033 жыл бұрын
Running a machine on this is pointless
@jimmylopez63943 жыл бұрын
I love these things, can throw the slippers on them to really bring up slurry to close up a slab and bring up slurry. Using a stick trowel afyer breaking in with a mosquito u get a great finish makes things so much easier especially when trying to bring up slurry before coving/ finishing driveways. Great on houseslabs in sections that are being covered by tile/ floorboard. Awesome the weight of these is less than 20kg so 1 man lift. I highly recommend having these, they don't replace your normal size power trowel but defiantly have their uses where the heavy trowel machine can't do. Problems I've found with mosquito choppers over years is the throttle cable that runs to pole seems to always have problems, I also wish you could adjust blades while using them but apart from that they are great
@darrenjames14962 жыл бұрын
No idea way to wet to break blades to high . Hopeless
@timdash59415 жыл бұрын
Nathan the legend !!
@aplasterersday3 жыл бұрын
Good!
@michaelvangundy2265 жыл бұрын
Did you use the same blades for all three passes? That first one was pretty wet. Did you use the chopper instead of a bullfloat?
@FINfinFINfinFINfin16 күн бұрын
What are the pro's opinions on just pouring, screeding, floating, jointing, edging, brooming and the hitting the joints and edges again? Can you get away without toweling whatsoever? I've seen it done I just don't know the long-term ramifications.
@FranciscoRamirez-v7k8 күн бұрын
Yo pienso k lo en Pesaro muy Pronto
@stevemazz31212 жыл бұрын
Being a driveway I am surprised you did not do a much heavy broom. Such as brooming it instead of using the Funny Trowel/Stick trowel. The texture wears off in time and becomes slick in the rain. We have a metal paving broom that leaves the finish looking very rough UNTIL it is driven on for a few weeks....left with sweet little traction lines. With all the walking tools I did not see a walking edger or walking jointer.
@gunfisher46612 жыл бұрын
They could have left a swirl finish with those machines ,just like the ones done with mag floats . we used to do it all the time when doing parking garages. Then you would`nt need a broom crew.
@markmoody703 Жыл бұрын
That's the first time I always said can we do that trial machine a driveway no one in New York has ever done it and I've just seen it so it can be done if it's completely flat
@drocha32573 жыл бұрын
That technique makes for a harder and flatter driveway. Last longer imo
@kgdcontracting39033 жыл бұрын
Not when it’s that wet and your putting a machine on it , I give it 2 years and it all spalls off
@user-zu2bw7ig5v3 жыл бұрын
@@kgdcontracting3903 exactly right man.
@berniemac84133 жыл бұрын
Can you use these machines on slopped concrete?
@AllAccessConstruction5 жыл бұрын
Heard you mention you was going to. Cut jointers later(saw cut?) ... Just curious why not at the same time
@concreteninja5 жыл бұрын
All Access Construction people don’t like joints cut into the slab much in Queensland Australia they like just a little cutline 👌 which is good for us less work and easier to do the job
@deangayford93853 жыл бұрын
Personally, I'd have had a major key joint along that driveway being so long ....but each too there own ...
@adamrobles77483 жыл бұрын
No joints cut in the middle?
@nonyabuisness5 жыл бұрын
🤔Ninja VS. Kangaroo tomorrow? I👊🏻👊🏻🤜🏻🤜🏻🤛🏻👊🏻🤛🏻🤛🏻👊🏻👊🏻✊🏻👍🏻😁
@concreteninja5 жыл бұрын
nonya buisness 😂😂😂😯😞
@kiwipig11895 жыл бұрын
Wow all that time floating it off and stick floating it than you go give it a rough broom finish? Using a stick float leaves trowel marks when you broom it you can see them I would of just bull floated till concrete firmed up then uses a light broom ? My opinion tho. great video and nice site's ... Kiwi.concrete.pig
@scottboult4223 Жыл бұрын
Where can you get one of these machines and poles ?
@KarinasRoblox5 жыл бұрын
Why do you finish a driveway like a floorslab. Edges are bone hard again.
@dannyminiaci99643 жыл бұрын
I would have had that hand wiped out before the chopper even got on that slab. Second wipe and broom before the second pass of floats blades . Time is money 💰
@kgdcontracting39033 жыл бұрын
What’s the point , Bull float and broom it
@user-zu2bw7ig5v3 жыл бұрын
Exactly. We don't machine any exterior mainly because we're in the north and it tends to delaminate if over worked.
@celioferreira87134 жыл бұрын
What is the country of this company?
@caseycordon3202 жыл бұрын
Who makes that little machine?
@ninjaninja11306 ай бұрын
Garage tour pls
@concreteninja6 ай бұрын
I’ll see what I can do
@kkkimakaze5 жыл бұрын
How much are those stick machines? Can master finish do deal if I say you sold me on how good they are - if ya pick it up by ya self I'm sold
@concreteninja5 жыл бұрын
Kimakaze Holt i’m pretty sure they will help you out bro just going to the website and hit them up 👍 . Tell them I sent you 👊
@kkkimakaze5 жыл бұрын
Cheers mate 🤙
@concreter68323 жыл бұрын
Just broom it . U making us Aussies look stupid , just shake the dags off, good job on hole.
@adamrobles77483 жыл бұрын
To wet to give it with the little machine
@danielnolan78165 жыл бұрын
Do they not come with finishing blades
@concreteninja5 жыл бұрын
Daniel Nolan yes they do but I do not use them yet .
@danielnolan78165 жыл бұрын
ninja why is that mate
@concreteninja5 жыл бұрын
Daniel Nolan I just haven’t needed to use them . If I was going to I would probably use a big one 👍
@aarongrabowski56205 жыл бұрын
Concrete ninja your better off using the combos like ninja gas his set up. Better all around. If you need more use a 3’ machine
@aarongrabowski56205 жыл бұрын
Meant to post that to Daniel nolan
@Mauricio-we1py5 жыл бұрын
Hey ninja
@concreteninja5 жыл бұрын
Mauricio 14 what up mate
@sujadiputra4284 Жыл бұрын
dijual di indonesia bos saya suka mau beli
@sujadiputra4284 Жыл бұрын
di indonesia belinya dimana bos
@grahamhill10933 жыл бұрын
Carport
@landonmorel37152 жыл бұрын
that broom finish looks horrible
@buzzlightyear2490 Жыл бұрын
Love thongs. After pouring, taking off gum boots throw on steel cap thongs 🤣🤣🤣