Big3Racing 2000hp Duster engine rebuild for Sick Week 2024

Рет қаралды 15,002

5 ай бұрын

Overview of the engine rebuild after a lifter failure on Dragweek 2023
-Merch
big3racing.com/collections/merch
-Companies that make this possible!
www.holley.com/
/ clevelandinj. .
/ perfectconve. .
briantooleyracing.com/
www.wiseco.com/
www.summitracing.com/
/ customwiresets
hptturbo.com/
joltsystems.net/
www.cometic.com/
-Our social Media
big3racing.com/
/ big3racing.net
/ big3racing

Пікірлер: 63

@conhemi50 4 ай бұрын

Bout time somebody made a vid of a sbm. Best smallblock on the planet. With the rite amount of aftermarket support they would dominate. Mopar to the front

@shannonbunch1003 3 ай бұрын

This duster is absolutely sick ... enjoyed watching the engine build..

@snapon666 5 ай бұрын

That crank is a piece of art

@icetech6 5 ай бұрын

Man that is just beautiful....

@gt1man931 5 ай бұрын

That duster was no joke, now I see why.

@TheBucketlistMob 4 ай бұрын

Good talking to you guys at SickWeek

@axlegrind4212 11 күн бұрын

you put all the main caps on then decided to check the thrust bearing. i always set the thrust bearing first before i install the rest of the caps. that comes from experience.

@xozindustries7451 5 ай бұрын

That’s a really nice engine, good luck this year

@Big3Racing 5 ай бұрын

Thanks!

@ericwright5419 5 ай бұрын

Man thank you so much I been waiting this one

@srdjanbjelanovic 5 ай бұрын

Thanks Bob for explaining everything. Good luck !

@ericwright5419 5 ай бұрын

I was hoping to see the epoxy job on deck of engine block what I'm about to do 😂

@Prismracing Ай бұрын

Call ARP ask for Chris in R+D. He will make you a set from custom AGE 625. As strong as the next larger diameter.

@maxfastest 5 ай бұрын

Wow ! Holy crap !

@eddiemathers1721 5 ай бұрын

That was a good video, and an Awesome small block.

@Big3Racing 5 ай бұрын

Glad you enjoyed it

@nhra7110 5 ай бұрын

great video! Sweet engine - good luck at Sick Week!

@Big3Racing 5 ай бұрын

Thank you!

@claytonandrews251 5 ай бұрын

Glad this popped up in feed I noticed a duster with the 340 call-out on the hood during other people’s coverage of sick week. You scoot along pretty good thanks for keeping it mopar..

@Big3Racing 5 ай бұрын

Thank you! we will have videos out from the whole week soon!

@ghostrt1608 5 ай бұрын

Are u going to run a twin turbo setup??@@Big3Racing

@davespotton7627 5 ай бұрын

Cool video!

@Big3Racing 5 ай бұрын

Thanks!

@terryenyart5838 2 ай бұрын

I love cometic head gaskets. I reuse them multiple times and have no failures yet, of course Im only 700 HP and not in the same situation.

@jimmungai1938 5 ай бұрын

On my stage five hemi conversion I have a Crower billet Kim, and naturally I got the bronze drive for the distributor and oil pump we coated the bronze gear, and the camshaft with molybdenum disulfide, and my bronze gears in excellent condition with thousands of miles on it

@Big3Racing 5 ай бұрын

I will look into this for the next one, thank you for the info!

@terryenyart5838 2 ай бұрын

Love the diameter ofvyour degree wheel. Nice for sure.

@lockedinstreetracing6005 5 ай бұрын

Great KZfaq video where’s this channel been at. I literally been putting mine back together thru all this bad weather.

@Big3Racing 5 ай бұрын

Stay tuned for a lot more to come!

@davidreed6070 5 ай бұрын

I see experience and knowledge working there

@Robs-Garage-experiments 5 ай бұрын

New to the channel here, love the video. What is the bore and stroke?

@Big3Racing 5 ай бұрын

4.160 x 4.000

@fabfazzina9557 Ай бұрын

What cylinder heads

@TheYamaha37 5 ай бұрын

Wouldnt they need stretched/torqued more the second time (when putting em in the engine) to achieve the same amount of clamping force that the bolts call for since they have already been torqued and stretched once already outside of the engine? Or do they go back to original size once lossed kindve elastic metal. Being strong steel i doubt it

@Big3Racing 4 ай бұрын

they return back to their original length

@glenbrannon7224 3 ай бұрын

What are the set screws in the lifter valley for ?

@Big3Racing 3 ай бұрын

those are just plugs into the lifter oil gallery to help with cleaning the block

@Anthony-nw5zv 5 ай бұрын

First time seeing you, what block are you using?😊 And what rods and crank shaft?

@Big3Racing 5 ай бұрын

Ritter block Bryant crank

@dalewier9735 5 ай бұрын

I have a question (and i am not a builder and have never raced): Bob, has anyone ever "dimpled" the counter wieghts on the crank shaft (like a golf ball) instead of polished smooth? Having played golf, i know a round object travels thru air with less friction with dimples. It likely does not help parasitic power loss much but i was just wondering. By the way, wow, what a build!

@Big3Racing 5 ай бұрын

not that i know of

@AnDrEw122100 5 ай бұрын

Some people do this on intake ports on cylinder heads . Not sure if it works I don’t think I’d go through the trouble of doing it for minimum gains .

@dalewier9735 5 ай бұрын

@@AnDrEw122100 thank you for your responce, I thought someone might have tried this because of the science of air flow. And if it made any difference, it makes more sense that it would be in the intate ports.

@dalewier9735 5 ай бұрын

@@Big3Racing thank you Bob. My question was because I had watched the episode of Mythbusters where they put clay on the outside of a car and cut "dimples" in the surface. They got better gas mileage with the dimple covered car compared to the smooth painted car. I enjoyed watching the rebuild. I had never seen bolt stretch measured before as the means of more accurate torque.

@doughelmle6575 5 ай бұрын

do you coat the piston skirts?

@Big3Racing 5 ай бұрын

not on this engine but we do on others

@emilyscandycakes4530 5 ай бұрын

Beautiful..are those W8s..?..Ritter block..tall deck..?

@Big3Racing 5 ай бұрын

Ritter tall deck

@ghostrt1608 5 ай бұрын

Edelbrock Victor SBM heads

@Big3Racing 5 ай бұрын

@@ghostrt1608 They are Brett Miller heads. He starts with bare castings and runs his program on them.

@evanuerkwitz4871 5 ай бұрын

Is this one of the blocks that Goodwin prepped when they were new?

@Big3Racing 5 ай бұрын

yes it was

@rong4189 5 ай бұрын

Impressive small block. I know they’re heavily modified, but what heads are those? W19s or something? lol

@Robs-Garage-experiments 5 ай бұрын

Edel. Victor

@rong4189 5 ай бұрын

@@Robs-Garage-experiments Thanks 👍

@Big3Racing 5 ай бұрын

Brett Miller heads. He gets bare castings and run his program on them

@user-uk5ke3nq5f 4 ай бұрын

What head did you use on a motor?

@Big3Racing 4 ай бұрын

Brett Miller heads. He gets bare castings and runs his custom program on them

@user-uk5ke3nq5f 4 ай бұрын

The heads are bare Edelbrook Victor. Special made do my specs Horse Power CNC Porting with Brett miller's port

@ragingbull3406 5 ай бұрын

Why do those oil pump fasteners look like "hardware store" bolts?

@boosted2.4_sky 5 ай бұрын

What's wrong with Ace Hardware bolts?🏁

@dusta340 5 ай бұрын

Because they are.

@thenameforcorey2261 5 ай бұрын

u like that rtv lol I don't no those engines well and being that your the builder ill assume u kno best I'm just giving u shit lol😂😂