#BigRigGB

Рет қаралды 504

15 күн бұрын

#BigRigGB... hosted by @Jeff'smodelgarage
i have decided to throw in the towel on this kit...it has given me a hard time from start to finish... i'm sorry jeff this kit was work not fun... so i have to cut my losses.. enjoy the video😒
...if you like my content please hit that subscribe & like buttons & don't forget the thumbs up...
if you like model trains please check out my model railroading channel here
/ @dacuzzz

Пікірлер: 61

@smithgroove945 13 күн бұрын

Deep breath Vinny. She's done. I think it turned out great. Thanks for sharing.

@dacuzzz6951 11 күн бұрын

hi Smith... they could at very least give good instructions... oh well ....you live & learn... on to the next project... thx 4 watching & your comment.. vinny

@ronmoen. 13 күн бұрын

Even with all the problems you had, it looks great. Have a good week.

@dacuzzz6951 11 күн бұрын

hi Ron....there are always going to be something going wrong in a model kit.. but this kit is the worst starting with the instructions... one of these day i might finish it.. thx 4 watching & your comment... vinny

@BrianSanders-tn7pi 8 күн бұрын

Hi Vinny. You got there in the end. I,m sorry that you didn,t enjoy the build. I don,t do trucks but I know that there is a lot to them. Also I model small scale 1/72nd so one of my trucks is about as big as the fuel tank on your truck. I like the paint job and the hood decals. Look in your stash and see if you have something that you will enjoy. Get back the love my friend. There's nothing worse than thrashing away at a deadend. But well done and don,t be to dissapointed. Good luck.

@dacuzzz6951 7 күн бұрын

hello Brian... i don't think there is a model that doesn't have some sort of issue... but this truck takes the cake... any how it's done as far as i'll go with it...my aircraft models are 1/72...thx 4 watching & your comment....vinny

@BrianSanders-tn7pi 7 күн бұрын

@@dacuzzz6951 Hi Vinny. Thankyou for your reply. I agree with you. There is not a single kit that I have made over the decades that didn,t have some issue's. I always say now that I never build a kit straight out of the box , there is always some problem or another. I do also do a lot of scratchbuilding. But that is through choice mainly but I do also do it because the part is a very poor representation of the real thing. I like you are a finescale modeller but unlike you I do it in the small scale. People often ask me "How did you do that ?" With patience. Something most modellers are blessed with. Kindest regards , Brian.

@Cavoritestudio2K2 13 күн бұрын

On the upside... the paint looks really nice, Vinny!

@dacuzzz6951 11 күн бұрын

hello Cavorite.... the painting is probably the only thing that went right.... one of these day i might finish it.. thx 4 watching & your comment... vinny

@bnsfcsxbob1526 13 күн бұрын

You did a good job Vinny. I built this kit in the original version had the same problems you had. I think they reproduce the same kit. I still have the same problems. A lot of the old AMT truck kits had a lot of the same problems and they reproduced them all and never fix the problemsbecause it wasn’t a lot of people out there making semi trucks, tow trucks, firetrucks, etc. don’t get you down. You did a great job on the build. Thanks for sharing Bob.

@dacuzzz6951 11 күн бұрын

hi Bob... welcome... hope you stick around for better models from me...this kit was a nightmare...this kit challenged me from start to where it is now... the instructions suck.. any pre-drilled holes had to be enlarged... adding the front bumper then the hood wouldn't open because it hit the bumper & finally the hinge breaking was the straw that broke the camels back... kit challenged me from start to where it is now... thx 4 watching & your comment... vinny

@pappytinkers 13 күн бұрын

It still looks great Vinny! All the details and effort really show. When a fits perfectly, it's easy to make look good, but it takes skills to make one like this look so good!

@dacuzzz6951 11 күн бұрын

hi Pappy....this kit challenged me from start to where it is now...one of these day i might finish it.. thx 4 watching & your kind words.... vinny

@JeffDonahueScaleModeling 13 күн бұрын

Hi Vinny, some kits are full of issues. Sometimes it's better to just move on to something else. I'll bet others have had these same issues too. Thanks for sharing. Have a great day. Jeff

@dacuzzz6951 11 күн бұрын

hi Jeff....i just wonder how many others that have built this kit had the same issues... in all the vids i watched no one showed the build ...always segments or time lapse..one of these day i might finish it.. thx 4 watching & your comment... vinny

@gavinbooth 13 күн бұрын

You gave it your best and it still came out looking very good Vinny , Regards Gav.

@dacuzzz6951 11 күн бұрын

hello Gav.... thank you so much for your kind words... one of these day i might finish it.. thx 4 watching & your comment... vinny

@davidchin350 12 күн бұрын

Looks good Vinny, hope you finish it soon. Those AMT semi kits are old molds and lots of small pieces but you learn a lot about trucks.😊

@dacuzzz6951 11 күн бұрын

hi David.... i just wonder how many others that have built this kit had the same issues... in all the vids i watched no one showed the build ...always segments or time lapse...i agree you do learn a lot by building models...i did a lot of research on all the air lines for the brakes & air suspension...one of these day i might finish it.. thx 4 watching & your comment... vinny

@petesmodelcarcustoms584 13 күн бұрын

Wow. You've had a battle there. I would suggest drilling and pinning the exhaust and rebuilding hinge with sheet but I don't know what you could do about bumper except for extending the mounts out further🤔. I haven't got one to look at but others have built it,I'd see what's on other yt vids.Thanks for showing and best wishes for your next build👍😎Pete 🤓

@dacuzzz6951 11 күн бұрын

hello Pete.... thank you for your suggestions but for now i need to put this one on the side & move on to something else...this kit challenged me from start to where it is now...one of these day i might finish it.. thx 4 watching & your comment... vinny

@MadGeniusProductions_MGP 13 күн бұрын

Even though it fought you all the way Vinny it still looks good. I'm with you, once a kit becomes more of a job than I'm done with it.

@dacuzzz6951 11 күн бұрын

hi Joe... i was/am so close to the finish line.. when the hood hinge broke .. that was the final straw ... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not to operating after you install the front bumper in it's proper location ... that's the poor QC .. thx 4 watching & your comment... vinny

@1968fordman 13 күн бұрын

Vinny, that sucks about that kit. Sometimes it's best to walk away and come back to it later. It still looks pretty good👍

@dacuzzz6951 11 күн бұрын

hi Will.... i agree .. this kit is going on the shelf & maybe...just ...one of these day i might finish it.. thx 4 watching & your comment... vinny

@ralphgreenwood5857 7 күн бұрын

Sad to see you throw it in Vinny. There were a lot of problems on this one. I can say that AMT was never really my favorite brand of car or truck model. It seemed they were always molded in plain white for one thing. The paint job does look Awesome!! 🙂👍

@dacuzzz6951 7 күн бұрын

hi Ralph...AMT does have issues but this kit is the worst so far... any how it's done as far as i'll go with it... thx 4 watching & your comment.. vinny

@AmateurScaleModelBuildi-lj3so 11 күн бұрын

Looks pretty cool, Vinny. Really stinks about the quality. You did an awesome job considering what you had to deal with

@dacuzzz6951 11 күн бұрын

hi John... this kit challenged me from start to where it is now...one of these day i might finish it.. thx 4 watching & your comment... vinny

@openexhaustmodels5139 6 күн бұрын

Looks real cool mate👍 I had same problem with bumper, so I made mine a curbside

@Joethemodelbuilder 13 күн бұрын

Hey Vinny sorry you had so much trouble with that kit. I guess at that point when a kit becomes so frustrating it's time to move on. Don't let it get you down buddy it happens.

@dacuzzz6951 11 күн бұрын

hi Joe.... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not operating after you install the front bumper in it's proper location ..time to put this one on the back burner.. thx 4 watching & your comment... vinny

@bigeddie1231 13 күн бұрын

We’ve all had those kits and looks like this one is yours have to walk away and come back to it in a month but what you’ve done looks really good so far

@dacuzzz6951 11 күн бұрын

hello Eddie.... i agree.. this one is the one i need to put on a shelf & maybe some day finish it... thx 4 watching & your comment... vinny

@ramblers69 14 күн бұрын

Turned out really nice Vinny

@dacuzzz6951 11 күн бұрын

hi Tom... the funny thing is ...i have 2 more big rigs in my stash... makes me.... think.. do i want to build them???. thx 4 watching & your comment... vinny

@tanzj 13 күн бұрын

Wow. Like I mentioned once before, it was probably done by Walthers….😊

@dacuzzz6951 11 күн бұрын

hi John....not all the model kit instructions are top notch but the one in this kit really suck... i am as far as i am going to go right now...this kit challenged me from start to where it is now...one of these day i might finish it.. thx 4 watching & your comment... vinny

@HotrodzModelShop465 14 күн бұрын

It's still a Cool Ol' Wrecker even though it fought you. I doubt the problem was your doing. It seems like some kits just don't want to be built. Have a good one Vinny.

@dacuzzz6951 11 күн бұрын

hello Marcus... thank you so much for your kind words... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not to operating after you install the front bumper in it's proper location ... that's the poor QC ..thx 4 watching.. vinny

@HotrodzModelShop465 10 күн бұрын

@@dacuzzz6951 Have a good safe 4th tomorrow Vinny.

@Jeffsmodelgarage 14 күн бұрын

It’s funny that two of the same kits can build totally different my wrecker gave me hardly no issues the frame was my issue other then that it was ok not great but ok sorry it fought you Vinny thanks for your support and trying it don’t look bad buddy k.u.t.g.w.

@dacuzzz6951 11 күн бұрын

hi Jeff... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not to operating after you install the front bumper in it's proper location ... that's the poor QC .. anyhow thx for doing the group build... vinny

@KerleyExpress 7 күн бұрын

it looks sharp

@dacuzzz6951 7 күн бұрын

hi Dwight... thx 4 watching & your comment... vinny

@steve87thpsap 13 күн бұрын

Well that’s unfortunate Vinny, sometimes they do just kick your ass.

@dacuzzz6951 11 күн бұрын

hi Steve... i guess " you win some... you lose some" the kit won the battle but not the war... i was starting to wonder if it was me... but when a pre-drilled hole has to be enlarged or the hood not to operating after you install the front bumper in it's proper location ..time to put this one on the back burner.. thx 4 watching & your comment... vinny

@dexterdog62 13 күн бұрын

I’m glad you’re having fun with the models, but I wish you’d get back to the trains…

@dacuzzz6951 11 күн бұрын

hello Dexter... hopefully i'll be back on the new layout by the end of the year...thx 4 watching & your question... vinny

@russellpoland6637 12 күн бұрын

Well, all of the hic-cups and burps aside, it looks good to me. On a serious note, should You decide to get rid of it, I would gladly trade You a kit or three for it. If You've a mind to. Just saying, I can't find that kit around here, so, just sayin" Vinny. Thanks for sharing the build with Us. Looking forward to the next video! Take Care, Be Safe, God Bless, Later

@dacuzzz6951 11 күн бұрын

hello Russell.... i am going to keep this model ... but if you are interested i do have another Pete359 Conventional partially started & a Kenworth W900 i;d be willing to work a deal with you.. if you are interested contact me at bnsf6951@gmail.com ... vinny

@kirknitz3794 13 күн бұрын

If it was HO, you could put it the junkyard.

@dacuzzz6951 11 күн бұрын

hi Kirk... it's actually G scale which means a bigger junk yard...LOL... thx 4 stopping by & commenting... vinny

@joeraderblackrockcentralrr 13 күн бұрын

Time to go back to trains VINNY

@dacuzzz6951 11 күн бұрын

hi Joe.... the kit won the battle but not the war... hopefully i'll be back on the new layout by the end of the year...thx 4 watching & your comment.. vinny

@daveschenkel1446 13 күн бұрын

I would have given up a long time ago.

@dacuzzz6951 11 күн бұрын

hi Dave... i guess i'm a glutton for punishment... LOL... the kit won the battle but not the war... thx 4 stopping by & commenting... vinny

@jimtedesco 13 күн бұрын

Looks good to me, but its obviously not a good kit to build.

@dacuzzz6951 11 күн бұрын

hi Jimmy.... there was a lot of stupid stuff... like parts not fitting in holes the factory drilled & the holes aren't straight.... the kit won the battle but not the war... thx 4 stopping by & commenting... vinny