#streetmachinegb

No video

#streetmachinegb

Рет қаралды 233

Ай бұрын

this is part 2 of the #streetmachinesGB... hosted by @blueoxmodelshops3405 & ‪@scalemodeloutlaw‬
in this video i get both cars standing proud on all 4's
..if you like my content please hit that subscribe & like buttons & don't forget the thumbs up...
if you like model trains please check out my model railroading channel here
/ @dacuzzz

Пікірлер: 51

@themediocremodeler-zm7ny 19 күн бұрын

Thanks for that tip. Bummer on the paint job, Vinny. Rust bucket group build candidate.😃

@WrOnGwAyScALeMoDeLs Ай бұрын

L👀king Good Vinn Great Progress on both builds without stepping back thumbs up!👍🏻👍🏻

@dacuzzz6951 Ай бұрын

hi reset... so far no issues except for paint...that has been fixed... stay tuned more updates coming.... thx 4 watching & your comment.. vinny

@BigSkyModelWorkshop 20 күн бұрын

Looking good, can't wait to see them finished.

@JeffDonahueScaleModeling Ай бұрын

Hi Vinny, great video. That paint problem is a real pain. I'm sure they will look great when you get them finished up. Thanks for sharing Have a great day. Jeff

@dacuzzz6951 Ай бұрын

hi Jeff... i think rustolium has a QC problem... i had the same problem with one of their primers... there is a lot to learn when it comes to paint... i'll get there...thx 4 watching ... your support & comment.. vinny

@davestrains6816 Ай бұрын

Looks great Vinny. Thanks for sharing. Dave

@dacuzzz6951 Ай бұрын

hi Dave.... i appreciate you dropping in & commenting.. stay tuned more updates coming.... thx 4 watching & your comment.. vinny

@duanesforkandspoonrr10 Ай бұрын

Looking good....

@dacuzzz6951 Ай бұрын

hi Duane.... so far .. so good.. thx 4 watching & your comment.. vinny

@ramblers69 Ай бұрын

Chassis's are looking great Vinny

@dacuzzz6951 Ай бұрын

hi Tom....so far so good... if you ever have any suggestion please share them... stay tuned more updates coming.... thx 4 watching & your comment.. vinny

@JustBelowAverageModelCars Ай бұрын

Nice chassis, my favorite part of the build.

@dacuzzz6951 Ай бұрын

hello & welcome.... i agree there is a lot of detail on some chassis.... i like the separate rails .. easier the paint... i'm still learning...thx 4 watching & your comment.. vinny

@daveschenkel1446 Ай бұрын

Looking good

@dacuzzz6951 Ай бұрын

hi Dave...it's getting there... thx 4 watching & your comment.... vinny

@Joethemodelbuilder Ай бұрын

Both cars are looking great Vinny. Nice update.

@dacuzzz6951 Ай бұрын

hi Joe.... so far i'm liking these kits... no issues except for paint... that has been fixed.... more updates coming.... thx 4 watching & your comment.. vinny

@ronmoen. Ай бұрын

Circumstances beyond your control, on paint compatibility. I'm glad it worked out with buying the second kit after parts were missing in the first one. Have a good week.

@dacuzzz6951 Ай бұрын

hi Ron... as i mentioned to Jeff...i think rustolium has a QC problem... i had the same problem with one of their primers... all is well at the moment .. so far .. so good... thx 4 watching & your comment.. vinny

@oneteamgarage Ай бұрын

That’s great work! 🔥💯🙌🏾

@dacuzzz6951 Ай бұрын

hello Ed... i appreciate you stopping by... so far these are going together very nicely...interiors for both cars will be the next vid... thx 4 watching & your comment.. vinny

@joesestito4342 Ай бұрын

Looks great Vinny nice job…. When will you have a layout update ? Hope your having a good summer…… Joe

@lancerevell5979 Ай бұрын

I just received my 70 Roadrunner kit today. I'm looking forward to building it. 😎👍 I've been doing spoon tests on compatibility, but it isn't a sure thing. I had a great looking paint coat on a spoon, but same paint on a Moebius Cyclone went very bad! Some company's styrene doesn't like certain paints. 😢

@dacuzzz6951 Ай бұрын

hello Lance... i am a bit disappointed that i didn't realize the kit is 1:24 .. so it's a bit bigger than the Chevelle.. don't get me wrong it's a great kit ... but so far so good...interiors for both cars will be the next vid... thx 4 watching & your comment.. vinny

@carouselofcrazychrisb Ай бұрын

Nice work!! I need to get me a 70 roadrunner!!

@davidchin350 Ай бұрын

Nice progress and bench update. Paint and primer adverse reactions are a mystery to me as well.🤔

@dacuzzz6951 Ай бұрын

hello David... i think rustolium has a QC problem... i had the same problem with one of their primers.. problem fixed... so far i like the revell kits for car models... they seem to have the least amount of issues....interiors for both cars will be the next vid... thx 4 watching & your comment.. vinny

@jimtedesco Ай бұрын

looks great Vinny

@dacuzzz6951 Ай бұрын

hi Jimmy.... so far i'm liking these kits... no issues except for paint... that has been fixed.... more updates coming.... thx 4 watching & your comment.. vinny

@HotrodzModelShop465 Ай бұрын

Bad news about the Roadrunner paint, That frame under the Chevelle is looking good. 👍

@dacuzzz6951 Ай бұрын

hi Marcus... i agree the frame on the Chevelle looks better than the Mopar ... so far .. so good...interiors for both cars will be the next vid... thx 4 watching & your comment.. vinny

@gavinbooth Ай бұрын

These builds are fighting you at the moment marra 🤔but build on . Regards Gav.

@dacuzzz6951 Ай бұрын

hi Gav... i'm Italian & we love a fight... so bring it on Mr. paint...LOL... all is well with both kits at the present time...interiors for both cars will be the next vid... thx 4 watching & your comment.. vinny

@1968fordman Ай бұрын

That sucks about the Road Runner, Vinny. I quit using Rustoleum after I had an issue with it. Plus it takes forever to dry! Both chassis are looking great!👍

@dacuzzz6951 Ай бұрын

hi Will....i guess it ill take a while for me to learn who plays nice with each other.... for now the paint issue has been fixed....interiors for both cars will be the next vid... thx 4 watching & your comment.. vinny

@openexhaustmodels5139 Ай бұрын

Cool mate👍

@dacuzzz6951 Ай бұрын

hello ...openexhaustmodels5139... thx 4 stopping by & leaving a comment... my appreciated... vinny

@kyledehartsscaleworks Ай бұрын

Painting is always a pain isn’t it? Yellow is super tough. Next time you try yellow, try a pink primer under it. Really. It’ll pop nicely. White is good too but pink just gives it a little extra. Those chassis are looking really fantastic Vinny. Great stuff. Nice update.

@dacuzzz6951 Ай бұрын

hi Kyle... i don't think i've seen Pink primer... thanks for that heads up.... i'm still earning all this paint stuff on cars... totally different than military or model trains...interiors for both cars will be the next vid... thx 4 watching & your comment.. vinny

@kyledehartsscaleworks Ай бұрын

@@dacuzzz6951 painting is tricky for sure. Test out some pink under yellow sometime. I have pink primer from tamiya and Mr color. I also like to use it under red. I’ll be watching for the next one!

@ralphgreenwood5857 Ай бұрын

Looking great Vinny! Maybe the two paints reacted because both are primers?? I remember you mentioning that the models were of different scales, so I googled it up. The 1970 road runner was 202.7 inches long while the 1969 chevelle was 201.2 inches long. I thought the road runner was much longer, but i guess it is the other body features just make it look much longer!! 🤔🙂👍

@dacuzzz6951 Ай бұрын

hi Ralph....i think rustolium has a QC problem... i had the same problem with one of their primers.. thank you for doing that research.. the problem here these models are different scales.. the Chevelle is 1:25 & the Road runner is 1:24 ...it's too bad about the scale size.. i can get a '68 RR in 1:25 but the car that i raced was a '70...interiors for both cars will be the next vid... thx 4 watching & your comment.. vinny

@ralphgreenwood5857 Ай бұрын

@@dacuzzz6951 Yeah, I don't think the scale difference will play much a part because of the road runners low and sleek body style which actually makes it look longer than the more rounded chevelle. I think they will look fine in staging!! 👍🙂

@ralphgreenwood5857 Ай бұрын

@@dacuzzz6951 Agree with you on Rust-Oleum.👍🙂

@LarrysModelShop Ай бұрын

It's not easy knowing which paints will play well together. I've been trying to stick with the same company of the paint, but even that doesn't always work. Looking good though!

@dacuzzz6951 Ай бұрын

hi Larry...right now i'm in the "trial & error" stage... for my car models i have been trying to stay with one of 2 companies... MCW & Mr. Color... i have not tried scale finishes or any other except for Tamiya rattle cans.. the Chevelle is painted with a rattle can & now ..so is the Road Runner... there is no reason why i didn't air brush them other than color choice...interiors for both cars will be the next vid... i used rattle cans for them also... let me know what you think when you watch the vid... thx 4 watching & your comment.. vinny

@ronaldjoyce7374 Ай бұрын

Ya, Liquors & Enamel paints don’t like each other 😱😢 Don’t feel bad, I did the same thing years ago 😂 I would wet sand that body down, lightly and clear coat then polish it, it would look like those new paint jobs that people are putting on vehicles these days, like surface rust looking with gloss clear over it. I personally don’t like it but it would be fun to try it with a model (BUT Don’t MIX THE PAINTS) 😂😂

@dacuzzz6951 23 күн бұрын

hello Ronald... i guess you live & learn... thx for your input vinny