A friend of mine bought one of these in 1989. He still has it and it still does the job. I've always liked the older equipment because it has less computers, monitors, sensors etc to fubar your day. Great video as always.

That’s a well cared for combine. The Case IH paint scheme on the old 14 series body makes for a sharp machine.

I had a 1460 ih. Was a good combine. Ran pretty much trouble free. I harvested corn, beans and wheat with it. Did a great job.

Still run a 1979 IH Axial Flow combine. Does a great job in wheat, millet and milo. So far, have been lucky in still finding parts to keep it running well.

Our 1660 combine with a IH 466 engine has been our main girl for over 20 years. It's great for our 400 acres a year of corn and with duals and a mudhog system it'll go just about anywhere in our area in WNY

Many years ago one of my customers got a new 1440 combine. He brought in his first load of spring wheat and when I got the scale ticket in my office I saw that my guys didn't take any dockage on the load. I asked them about it and they showed me the sample from the load. The sample was as clean as seed wheat. We were impressed.

It amazes me to see how clean and straightforward the controls were on this 1985 Case IH 1460. When you think about just how complicated the electronics are on the harvesters of today, you almost need to be a rocket scientist to run them. 😉 Love seeing your videos my friend.

Our red cab 1985 IH 1460 has the factory DT466 engine. You would be surprised at the numerous updates such as shaft size and bearing sizes on some parts. We have had everything off of ours except the cab, engine and one front final drive. Dad still used it this fall with no break downs.

This was a great video on this older combine Jason. Enjoyed hearing the history and seeing how much things have become more sophisticated in the new combines. Thank you. Peter

Great video Jason. I love watching classic combines harvesting corn and beans. They may not be high powered or fancy but they still get the job done.😊😊😊

G F Cooper Farms in Ohio. We've got the IH 1460 and 1480 combines that we are still using today to harvest corn and beans with. Love these older machines.

My family's operation has one of these IRL, picked it up for 2k right before harvest this year, runs pretty good along side the 815 and 2588

We had a 1460 a 1660 then a 2166 and now a 2577. They were very reliable and simple combines, they work good !!

It's truly awesome to see the older machinery still working.👊😎

good to see an older combine getting the job done. not messing with expensive sensors and computers

I love seeing the 1970s-1990s farm equipment

I love my 1460. Few updates I have in it. Kile flitting, concaves, vanes, monitor and rood on bin.

It’s always fantastic to me to see it all combined doing what it was made to do and this one looked like it was working extremely well

Nice old school combine. Looks like a well cared for machine.

The first combine I learned to drive was a 1460 in 1997 when I was 15 in wheat. I choked it down every time I came across a thistle weed. What a long summer!

Memories from Indiana! The first combine I bought was a 1460 after my Dad sold his New Holland 985 which was a great machine, but after he drove the 1460 he thought he was in heaven! Soooooo much easier to work on, the 985 it always seemed like you'd have to take off 2 belts to get to the one that needed replacing. On my third 1660 (combine fires) now a 1990 model. Would have replaced it with a 2166 or 2366 by now but a rod went through the block on the Cummins motor and rebuilt it. But maybe next year. Really want to see if the newer cab's on the 2000 series are less dusty due to having covid lung and on oxygen. If anyone thinks they are an improvement please let me know. If not I'll keep on rolling in the Ole 1660. And nice video!

Thank you for a great video. Good to see older equipment still putting in the hours

Hi Jason. Thank you for your videos. The only combine I ever rode or drove was back in 1975 here in New Zealand. It had no cab, just a sun screen. Steering levers brake system to steer it. It had also been converted from a bagging system to bulk. Also a petrol engine, straight 4 cylinder. Harvested barley for feed in Hawkes Bay province. No photos and I cannot remember the model. You got very warm and itchy harvesting barley. We also baled the straw. Best regards, Silas.

First combine I drove in the 80’s. I’m running a 8120 now and am amazed how far we’ve come. She was so simple in hindsight.

Brilliant video sir ! They had one at my uncles farm here in the UK 🇬🇧 great days in the early 80s. ..the whine of the machine was brilliant!

Thanks Jason, it was a great machine! Great history lesson has well.

A very cool find Jason. That auger just clears that trailer. It's still doing a good job.

Love the video. We have a beautiful well-kept well-maintained one at auction this week in Indiana. It has been an excellent piece of equipment in our farming business. Retired from farming so equipment no longer needed.

Love the video and always love watching the classic stuff getting it done

Great video! The 1460's were great combines.

That turbo sounds Amazing 😲😲😲😲

This Ole boy does know how to grow corn; looking fine!!

We run a pair of 1480’s on our farm in wheat and canola. Great old machines, easy to run, easy to work on, and they do a great job all these years later

Very interesting history and machine. Thanks as always.

Great video Love them old school combines

Great Combines!!!

I owned a 1460 for several years, but I believe it was manufactured before the sale to J I Case. Had a 4wd added to it after a wet fall that saw me pulled backwards out of sand hills numerous times. Great combine for the time! Traded on a 1660 that I ran for over ten years.

Great vídeo Jason.

Last combine our family bought was international 1460 in 1979. When started on 2500 acres rice farm in south east Texas. In 1962 had massy 90 2 international 151 & 2 international 403 In 64 got j d 105 Then massy 510 eventually 3 of those then massy 750 and international 915 when got 1460. It😂was unbelievable. Cut 200000 lbs in one day in 160 bushel corn. 160-180 k rice with 18 ft header. For time nothing else was close

Looks great 👍

Cool to see a 1460 still going strong💪😁

I run the exact same machine but 2wd, about as reliable as it gets. Can't beat that straight pipe whistle on a cold night!

Very nice Jason, it moves through the field

The combine I learned on when I was young

Wow that really brings back memories I grew up in one of them things learned how to drive and operate a combine I think we had close to 10,000 hours on ours before we ever got rid of it probably one of the best combines ever built The new ones are junk at 5000 hours I have one I know

I live in Nebraska out by North Platte there's still a few of them around. Yeah good combines you don't have the electronic screwing up your day when they go bad.

Hi our family has been going down on the wheat run and we do alot of custom work in the fall here in southern minnesota but anyways my dad and uncle would trade combines every fall and in in 85 I remember we were supposed to get 4 iH 1480s but two of them and up showed up as caseih 1480 I can remember alot of our customers thought we repainted them but my uncle would always say that's the way the dam things showed up needless to say he was never happy about that merger so in 1990 when massey came out with the 8570 we traded and started running massey until 2019 in 2020 we went back to caseih now we have 4 8250s.

Good video.

That is a great lookin combine

I will have to do a look over next time I see one of these model years. I assummed the owners upgraded the paint to look like a newer model. thanks for posting

Very many of those machines still going strong!! Only reason I upgraded to a 2188, The sheet metal on our 1460 wore so thin I could no longer patch it.

Congratulations on your induction, great article in Toy Farmer magazine.

Being the trucker that I am I would be interested just what the load weighed in at. Usually if you are loading to the bows like that you are beyond running overweight.

My Australian family farm had one of these during the 80s and 90s we cut wheat and sorghum during that time we snapped the rear axel twice.

Bella macchina. 💪👍👍👍

We use a 1986 1660 combine and harvest wheat, barley, and canola with it. It does a great job.

$86,700 in 1985. Wow. We had a 1480. It was a very good machine. The 466 would run on full out day after day. The hardest duty cycle application known to man. I ran our 1480 quite a bit, often late into the night. We wore out the transition cone on it. Not easy to replace. Our 1480 replaced a TR75 and a 914 and did just about as much as both together. The 1480 got replaced with more TR - 95, 97 and 99. Those were good combines except the stone traps weren't the best.

Great Video

I had a 1440 ih same size rotor but build a little lighter. I was told the 1440 was put on the old ih 815 frames and the 1460 on the 915 frames with the turbo on the 436 engine. I liked mine

my neighbor still runs an 85 1440. Beautiful combines.

My old boss well my first farm boss if I remember correctly ran a 1660 or a 1680 case international combine with ether a 4 row or a 6 row head I can't remember off hand but i'm 26 years old and I love these older combines and machines

👋 hey 👋 from Dexter,Missouri my friend. Super awesome video.

One of a kind for sure, that's a rice spec'd combine....

nice 😍😍

I have the same combine, 2nd great machine. 3200 hours on it. Was a late serial number machine. Some of the parts on it are the same as the 1660. Run a 22 ft straight cut header on it for wheat and barley. Love the straight pipe on it sounds great.

We have a neighbor in Ohio here who has one of those combines its pretty cool.

37 years young, looking good for it too...

Very very nice jason

My machine!

Good vedeo 🎉🎉🎉🎉🎉🎉

Hello! Classic oldie.

Great video! Butler County Farm

Awesome video, few around here of that paint scheme.

So much for the buddy seat on this combine

Good machine I remember somebody in S Ontario had one late 70s. With a grain cart could combine 60 acres of corn a day unloading on the go. The rotor was touchy in damp conditions they said. We had a Turbo 700 Deere great machine too

@big tractor power do you do many vids on gleaner combines?

This video is a little hard on me today. Seen a combine like that harvest alot of corn. Great combine, I knew it was a 1985 model before you indicated that it was that year model. John T.

That 1460 has a cleaner bin sample then the new machines 😮and no auto steer beep

I see he has the rear tires facing forwards, so is that one a HRWA model or is that just how he had them at the time? I enjoy seeing classic/vintage machine still in good shape out there getting things done just fine. BTP- did you ever notice that the refrigerator on the TV show friends was an International Harvester?

Took me a couple seconds to put it all together. Very rare combine. I updated from a 1990 1660 to 97 2188. So far so good

A good machine we had a 1660 never had a problem with it

Good video. Love hearing the history and specs. Why would they eliminate a muffler? Case figure farmers are already 1/2 deaf so it didn’t matter?

Ładnie Idzie

I have a red cab '85 ' 1480. Nice machine

I ran an international 1420 on a farm I worked for for many acres. Then we upgraded to a 1666. That was like a caddy compared to the 1420. The 1666 is still going. Just seen it cutting soybeans yesterday.

A good machine we had a 1660 never had a problem with it.

Have a couple of these combines in our area, don’t see them very often

My brother has a 1460 and still runs it, doing beans today with a 15 ft. header. Corn is next with a 6 row head.

My dad still has a 2188 to cut corn, but use to have a 1440.

1680 w/Cummins 4x4 30’ 1020 and 863 corn head. Harvest wheat, soybeans and corn. 1990 model with 5,400 hrs.

War wahrscheinlich der beste Mähdrescher der Welt

We use a 1660 and harvest wheat, corn and beans with it.

I have only seen 2 red top 1440's, I own them both.

This Video is awesome!! Thank you so much for capturing it so well. I’ve driven the neighbor’s 1440 for the last 5 years (1980?). Then late last fall he bought a 1640. (1986?) So I’ve driven both and seen the differences firsthand. I didn’t know about the transition year model. Is it only for the 1460, or is it also for the 1440/1480? Look at my profile for a couple of videos! I love 70, 80, 90s equipment, especially combines!!

2:10 pre emissions FLD. happy truck

Those hydraulic systems just cried out to U

I’m super curious, where do you get all your specs for the equipment?? You do an amazing job with your history and specs!! As a farm boy I memorized tractor specs growing up. Now I’m an engineer, but still help grow a few crops on the old dairy (retired) farm.

We had a 1482 with a 6788 pulling it and then later on a 1480 with upgraded axles from a 1680 and upgraded feeder housing hydraulics from a 1680 to lift larger and heavier tables.

Have a 1460 case international. It's hard to get parts for and noting but trouble. Our 1440 was great however

Hey big tractor power can you make a video of case afx8010?