Bike setup/configuration for hard/extreme enduro and tech riding

Рет қаралды 28,061

4 жыл бұрын

Bike setup/configuration for hard/extreme enduro and tech riding
/ technicalenduroskillst...
@technicalenduroskillstraining
www.endurotyres.com/products/ / hardendurodesigns
enduropro.myshopify.com/produ...
www.eurotekktm.com/ktm-parts-s...
www.eurotekktm.com/ktm-parts-s...
www.eurotekktm.com/ktm-parts-s...
www.p-tech.ee/KTM-enduro-part...
nihiloconcepts.com/products/k... www.dirtbikespec.com/hard-par... www.dirtbikexpress.co.uk/bike...
www.dirtbikexpress.co.uk/bike...
kriega.com/works/haul-loop-front

Пікірлер: 45

@TheGirlOnABike 4 жыл бұрын

Fantastic video. Thank you! Watched every second. Some amazing tips and ideas.

@mpires38 4 жыл бұрын

Great content with top quality! Good job!

@richnewman1913 4 жыл бұрын

Thanks for the very informative and interesting video 👍👍. It’s obvious you know your stuff. Great job 🙏🙏👍👍👍

@enduroskillstraining 4 жыл бұрын

Rich Newman thanks Rich, appreciate the comment 👍😎

@HippoDrones 4 жыл бұрын

Ace vid, some great info... I wish I was able to ride hard enduro.... I can barely manage green lanes! :D

@enduroskillstraining 4 жыл бұрын

Practice makes perfect! 😄

@HippoDrones 4 жыл бұрын

@@enduroskillstraining :D

@ryt2331 4 жыл бұрын

Can you get both of your feet down comfortably with that 5mm spacer thanks great video 👍👍👍

@chrismharthart 4 жыл бұрын

Hi. Thanks for the vid. Went great with a beer. What fuel sock? Can’t seem to find one that will fit my 2017. Thanks

@enduroskillstraining 4 жыл бұрын

CHRIS HART it’s available from the KTM Powerparts catalog 👍

@will909 2 жыл бұрын

Great vid! How does crazy six days compare to romaniacs?

@mr2oomad 4 жыл бұрын

Great videos thanks I have shared with my riding buddy's. Question on the 5mm spacer please? where is the spacer? on one of the shocker mounts or spring or piston? Thanks I'm 5'9" and I'd love to be able to get a toe down!

@enduroskillstraining 4 жыл бұрын

Hi, it fits inside the shock and prevents the shock shaft from extending as far as it did before. Usually machined from Delrin plastic or metal by the shock tuner. Highly recommended if you struggle to get your feet down or for general technical riding

@bushbasher69 4 жыл бұрын

clutch slave* nice vid mate

@enduroskillstraining 4 жыл бұрын

Tumblemydice yep, just stumbling over words. Difficult making videos 🙈🤣

@cengizozbek5285 2 жыл бұрын

Very informative. Notice no rear pull strap; is there a reason for that? Thanks

@doublehelix109 4 жыл бұрын

great video, very suprised that with all the effort youve gont to that you dont have XRC billet clutch and ignition covers. i also really like the midwest clutch lever its short and gives a really nice 1 finger pull for hard stuff reccomend checking that out

@enduroskillstraining 4 жыл бұрын

doublehelix109 I have a KTM Powerparts billet clutch cover, not fitted yet 😊

@enduroskillstraining 4 жыл бұрын

I have tried the Midwest clutch lever on a previous bike, found that it was hard to get the bite point setup the way I like it and not have the clutch slipping at the same time. You have to be incredibly careful when setting them up. I also used a Clake from Australia, amazing bit of kit. I actually run a 9mm clutch master on my bike (from the 150EXC), makes the clutch lighter and stretches out the bite point a little bit for easier control.

@doublehelix109 4 жыл бұрын

@@enduroskillstraining where can i find more info on that mod? yeah they are a bit finiky to set up and ive found now you need to adjust as the clutch wears as well

@enduroskillstraining 4 жыл бұрын

doublehelix109 there isn’t much info out there on using the 9mm clutch masters. It’s something a couple of pro riders do on their bikes and a few of us who became aware of it. It’s the stock Brembo lever from the KTM 150 bikes.

@enduroskillstraining 4 жыл бұрын

@@doublehelix109 think it's this part number but do check with dealer: 79202030044

@Bruno_Costa_11 4 жыл бұрын

Hi. Thanks for the video. Best gear ratio for Hard Enduro on a 300 EXC 2020?

@enduroskillstraining 4 жыл бұрын

Bruno Costa how heavy are you? If you are a heavier guy I’d say 12/50. I personally love 12/50, I weigh 93kg. If you are a lighter guy maybe try 12/48.

@808CL9 3 жыл бұрын

What quick disconnect fuel filter are you running?

@enduroskillstraining 3 жыл бұрын

The one available from Slavens Racing

@mihaidobrescu7430 4 жыл бұрын

Hi Carl, do you know what oil weight and how much you use in cc forks ? For Romaniacs.

@enduroskillstraining 4 жыл бұрын

We use 5W, 380cc and 1.2bar

@mihaidobrescu7430 4 жыл бұрын

Thanks !!!

@joejohnston471 4 жыл бұрын

Great Info. What seat pouch is that?

@enduroskillstraining 4 жыл бұрын

Joe Johnston enduro-pro.com I helped design it. 👍😎

@joejohnston471 4 жыл бұрын

Thanks, Do you think an iPhone (older like a 6) would fit in the clear outer pocket? Would make for a pretty trick GPS if it did.

@enduroskillstraining 4 жыл бұрын

Joe Johnston I doubt an iPhone 6 will fit in the clear pocket, maybe an iPhone SE but not tested. Everything up to an iPhone 11 Pro fits in the bigger pocket

@ridetillidieharleyyamaha4063 3 жыл бұрын

Some of these parts should be on the bike when you buy it giving the price of them new

@faltakktm 3 жыл бұрын

Hey, theese are really nice tips. Can you tell me where can i get the lighter feeling clutch master?

@enduroskillstraining 3 жыл бұрын

Thanks! The 9mm master is available from the KTM parts fiche or any KTM dealer.

@andrewsoldan6050 3 жыл бұрын

TBH I don't see many pro riders actually using brake disks guards, I don't use them also and never bent a disk...in addition guards are horrible in mud.

@enduroskillstraining 3 жыл бұрын

They do actually. Virtually every hard enduro pro rider uses rear shark fins and a lot of them use front Acerbis/Pro Carbon disc guards.

@Crath0rne 4 жыл бұрын

Tubliss?

@enduroskillstraining 4 жыл бұрын

Crath0rne not a fan. Had it on my bike for 3mths. Still got punctures, the worst kind, the thin little innertube. 100% mousses now. Super reliable and last ages. But of course a personal choice. For me, I prefer to eliminate flats completely.

@Crath0rne 4 жыл бұрын

Technical Enduro Skills Training, Thanks for the advice and video. What brand of mousses do you use? for rear hard enduro obviously softer the better But durable one

@enduroskillstraining 4 жыл бұрын

Crath0rne Michelin M14, drilling a 16mm hole every 100mm. Stuff the hole full of mousse gel. Ride with it 4-5 times before event