BIQU B1 Nozzle Replacement
Рет қаралды 11,803
3 жыл бұрынI have not seen many videos on how to replace the nozzle on the BIQU B1 Printer so I made this one on how I replace the nozzle. Links to the Boron Nitride Paste and Hotend fixes are below.
Boron Nitride Paste - www.amazon.com/gp/product/B08...
Spacer for BIQU Hotend fix - www.thingiverse.com/thing:462...
PTFE Cutter for BIQU Hotend fix - www.thingiverse.com/thing:462...
@eddieresendez9958 Жыл бұрын
I stumbled upon this video after needing to replace the nozzle on my BIQU B1. At first, I thought this video was way too long, but now I realize how tedious it is to remove the nozzle. Thank you for taking the time to make this video. This was really helpful.
@MrBrianwilliams1980 Жыл бұрын
You're welcome and trust me I know it is a pain and lengthy video but I had to do this so many times on the 8 printers I had I figured I would share how I replace them. I think there is probably a faster way but this is just the method I came up with :)
@roycemozley8443 8 ай бұрын
You are the goat for this video. I'm on my second extruder 😅 getting ready to swap nozzies from abs to pla
@wheelsnutsbolts 5 ай бұрын
I'm wondering why you had to heat the hotend up before removing the nozzle? I replaced mine without the heat with the cable deatached, put everything back together and plugged in the cable afterwards. Worked out just fine
@joshuagardner4233 2 ай бұрын
More explanation of tube replacement.
@adammasri Жыл бұрын
Had this printer for almost a year & decided to change nozzle for the first time. I owned 6 creality printers. Biqu b1 is the first printer I ever know being the most ridiculous printer just to change the nozzle. That's why I'm seeing no support from biqu themselves knowing how ridiculous their hotend design is.
@zachampofo4945 Жыл бұрын
I had mine for a few months and have been trying to find a good tutorial on nozzle replacement for it. Since i mad the rookie mistake of printing with glow in the dark filament nozzle is worn down, The hot end design is terrible, compared to other printers
@MrBrianwilliams1980 Жыл бұрын
yea man it is wild, I have 8 of the biqu printers and all 8 of them have been put up in the closet. I have 8 ender 3's and 8 ender 3 s1 pros that are my production printers :)
@oxydk Жыл бұрын
when you are talking heat are you using celsius or fahrenheit ? 240 sounds insane to me, i usuallt print at 180
@MrBrianwilliams1980 Жыл бұрын
240C to remove the nozzle then 215C when I am tightening the nozzle back up onto the heater block.
@joseluisalmazo5002 Жыл бұрын
Cuanto mide el pedasonde teflon que cortates
@MrBrianwilliams1980 Жыл бұрын
use este enlace para imprimir la plantilla para cortar la longitud correcta. es de 35,5mm www.thingiverse.com/thing:5206641
ItsMeaDMaDe
Рет қаралды 29 М.
BalcevMMA_BOXING
Рет қаралды 9 МЛН
Nikita Zdradovskiy
Рет қаралды 6 МЛН
KinoBravo
Рет қаралды 5 МЛН
ISSEI / いっせい
Рет қаралды 84 МЛН
#marvelvs #spiderman #spidermannowayhomeleakedtrailer #marvel #avengers #thanos #mcu #fighting #tren
Dinasor Show
Рет қаралды 23 МЛН