Birks Challenger Vintage Pocket Watch Restoration

No video

Birks Challenger Vintage Pocket Watch Restoration

Рет қаралды 597,192

Күн бұрын

Marshall finds a good deal on a pocket watch on eBay, it's broken but has some interesting history behind it as it turns out. This project pushes the boundaries of what he can do, and takes over a year to complete!
Support Wristwatch Revival via Patreon: / wristwatchrevival
Visit Sutcliffe Hansen for toolkits, revived watches, straps and more: sutcliffehanse...
Follow on Instagram for Project Updates in between video releases: @wristwatch_revival
------------------------------------
These are Amazon affiliate links to some of the equipment used for these videos and purchasing anything through them helps support the channel.
WATCHMAKING TOOLS AVAILABLE ON AMAZON:
Bergeon Screwdriver Set: amzn.to/34URcok
Dumont Tweezer #3: amzn.to/2YX4Hjl
Bergeon Springbar Tool: amzn.to/3jF8pX1
Bergeon Case Opening Ball: amzn.to/34VLbYg
Bergeon Presto Hand Removal Tool: amzn.to/3bfHtdo
Bergeon Movement Holder: amzn.to/3hQsY29
Horotec Hand Setting Tools: amzn.to/2Gdye1K
Rodico: amzn.to/32K0PDG
Bergeon Blower: amzn.to/34RgVxX
Bergeon Case Opening Knife: amzn.to/34VHr9e
Bergeon Quick Service Kit: amzn.to/2QHnScC
Ultrasonic Cleaning Machine: amzn.to/3i6BBER
Amscope Microscope: amzn.to/2EuReZ4
Multifunction Timegrapher: amzn.to/344jw5I
CAMERAS AND AUDIO:
Main Camera, Sony A7III: amzn.to/2Dk3Q4K
Secondary Camera, Sony RXVI: amzn.to/2Dlrwpx
Main Macro Lens, Sigma 70mm f/2.8: amzn.to/3lD4Wdb
Camlink 4k Video Converter: amzn.to/3hTiiQf
Rode USB Microphone: amzn.to/2EQphLb
Audio Recorder, ZOOM H6: amzn.to/31R11BQ
Small Sirui Tripod: amzn.to/2YVgeQl
Sirui Tripod Head for Overhad Camera: amzn.to/2QNoNZ8
COMPUTER STUFF:
Apple Macbook Pro: amzn.to/2EFPKvr
Synology NAS: amzn.to/3bpVTaY
Seagate HDDs for NAS: amzn.to/3hQ5hqt
Samsung Portable Drive: amzn.to/34UdhTT

Пікірлер: 703

@porsche9144uify 4 ай бұрын

When you described the Canon(spelling?) Pinion as the transmission, I suddenly got it. As in the pinion on a differential. I'm a mechanic on cars, not watches, but watching you repair these relaxes me. I watch these videos at night and fall asleep. Maybe its the calm narraration..... Very much enjoy these videos.

@paulschumacker9901 3 жыл бұрын

Excellent tutorial. Two points to note. First, good job aligning the impulse jewel with the balance arm. This dictates that the hairspring stud will be visible through the spring coils, which makes it easier to reattach the balance bridge. Not such a big deal with a pocket watch, but for my skill set it’s a big deal with a small wrist watch movement. Second, the inside of the case back says that it’s gold filled, not gold plated. Gold plating is extremely thin and will wear through even with normal wear. Gold filled is much thicker, and can be safely hand polished using a jeweler’s red rouge cloth. But don’t let it even get close to a buffing wheel. Please keep up the great stuff.

@ttoddh1 3 жыл бұрын

Loved watching a person admit they have limitations and are still learning but also for being proud but not boastful. First time watching a watch repair video. Thanks so much I learned a great deal. Keep at them!

@henkholdingastate 2 жыл бұрын

Oh dear, how do you know which way to turn a watch screw if you don't know whether it has left or right threads? I love your movies

@Kevins-Philippine-Retirement 2 жыл бұрын

@@henkholdingastate usually, the LH tread screws have score lines on each side of the screw head slot which is the indicator. Also, I believe it's usually just for the reduction wheel.

@bills3216 Жыл бұрын

I wonder how many of your viewers just spent over$500 on watch repair tools after watching these videos? I know I did! It's such a fascinating hobby that I can't wait to start learning. Thanks Marshall for providing us with these awesome videos and inspiring us to tinker ourselves. I love the look of this movement by the way

@mrld3005 Жыл бұрын

I did but my kit was $15 including the rubber ball and free shipping....

@Surge1045 Жыл бұрын

Geeze! I'm way over $1000 in tools by now and it's all Marshall's fault! LOL! I'm also getting ready to replace a broken staff on a tiny balance wheel from a military A-11 watch. I just pulled the trigger on a K&D Inverto staking set, a vintage poising tool and a few other hand tools... (again, Marshall's fault). But how I love this hobby so far!

@geishaboucher4881 Жыл бұрын

Indeed! Same here. I have started gathering all the tools and equipment to get started as well. While working at home, I have been watching the videos and really look forward in purchasing my first “non-working” watch to see if I can revive it.

@drakemcfee9138 7 ай бұрын

Ahhh hehe...what new tools dear?😬

@edwardbishop1176 2 жыл бұрын

My Father started as a watch maker in the late 1920's. Most repairs were broken balance staffs. As there were no parts he hand turned balance staffs from steel rod. Real watchmaker.

@nyckhampson792 4 ай бұрын

Wow , that's utter skill ....good man.

@Frankowillo 3 жыл бұрын

Man, watching this is crazy. I get so tensed up, every few minutes I have to tell myself to relax and unclench my fists. Love the background story and the repaired watch.

@johnmcclain3887 2 жыл бұрын

I've been a mechanic, machinist, toolmaker, fifty plus years, and have done this a couple times, without certain knowledge, and that mainspring is very much reminiscent of reassembling an antique Harley transmission, that "decided clunk" of the spring setting home. I've gotten enormous satisfaction, watching it done with more knowledge than I've ever had. My grandfather was a watchmaker, as well as "sweeper, in boiler no 1" at the powerplant. I have several of his watches, to be "refurbished", just inherited from my father, who passed a couple years ago. This has been an awesome education, telling me what i was doing, when I didn't know, back then. Many of my tools are precisely as his, except weighting in a hundred times, and force, scaled equally. Thanks, now I get to figure out the same parts, in watches that look substantially different. Semper Fidelis, John McClain

@roryvonbrutt7302 2 жыл бұрын

John McClain....Ditto that❗️ union ironworker here‼️®™️

@kegluneqs1011 3 жыл бұрын

a few advice for your future balance work: -Mark the position of the collet in regards to the balance weel before dissasembling but also the position of the double roller. - before fitting a balance clean the jewels to avoid transfer of any residue (a clean pivot in a dirty jewel becomes dirty) -before puting the movement on the timegrapher make sure you have determined the correct lift angle otherwise your data will make no sense - if you need to regulate it set your balance alone and make sure the roller jewel is perfectly align with the center of the banking pins on its resting position (with a bit of skill you can adjust the rolle position with a screwdriver by widening the collet, rotating the staff and straightening the collet) this is how you correct your beat error -you'd be wise to invest in a poising tool to make sure your balance are at equilibrium. Keep on the good work you are on the right track

@ohger1 2 жыл бұрын

Is lift angle something that can be measured by the watchmaker or is a published spec from the manufacturer (pardon my ignorance)?

@kegluneqs1011 2 жыл бұрын

@@ohger1 the lift angle is a data supplied by the manufacturer but you can determine it yourself Ti do so you need to wind the watch until your balance has a 180 degree of amplitude You put the watch on the timegrapher and you change the lift angle value until the timegrapher gives you a 180 degree of amplitude in it's result

@ohger1 2 жыл бұрын

@@kegluneqs1011 Thanks, I had to read that a few times but I think I get it. The balance wheel total rotational swing is determined by the energy from the mainspring, so adjusting the wind until we reach 180 degrees (I assume we mark a spot on the balance to see the swing rotation) is our starting point. Learning slowly..

@kegluneqs1011 2 жыл бұрын

@@ohger1 it is about right yeah

@Scottie_S 2 жыл бұрын

I can't believe I wasn't breathing while watching you reassemble the balance and staff. It was like watching a suspense movie! I know I'm late to the party, but this was fantastic!

@touchedouche8806 3 жыл бұрын

I want to start this hobby just for the reason of these great videos.

@Pythonaria 3 жыл бұрын

Me too but one thing I've noticed is there aren't many (or even any) lady watch repairers or not that I've seen so far. Maybe I'll be the first?

@Gary-Seven-and-Isis-in-1968 2 жыл бұрын

@@Pythonaria Maybe not in KZfaq land, but in reality there are many Women involved within the watchmaking industry. I can see your advantages, smaller hands and a higher pain threshold. Deep level of patience is required and the ability not to be phased by having to do everything over again after you realise that something earlier was done wrongly. Give it a go, you don't need a fortune to make an initial investment in tools and equipment, just avoid buying crappy cheap tools and progress at your own pace.

@Pythonaria 2 жыл бұрын

@@Gary-Seven-and-Isis-in-1968 Thanks Gary.

@variable7833 2 жыл бұрын

Same. Im going to get a small cheap kit and start learning how to take apart watches myself.

@jager2257 2 жыл бұрын

bro same

@EngineMisfire 5 ай бұрын

You should do a follow-up video where you try to bring the balance wheel back into "balance" with respect of the horizontal plane. Long time ago, I used to fix bicycle wheels by tweaking the spokes back into alignment. Such will not be the case here. Anyway, I really enjoy you videos and your delivery style is top notch and professional. Keep them coming.

@roblock2835 2 жыл бұрын

Watching you do this, reliefs me from my depression of a break-up, how structurise the process, how you disassemble the watches, thanks i appreciate it! for me this is a sort of meditation, and a learning process.. as i feel i want to repair old vintage watches myself. and by watching is a good learning process to understand all the small mechanical aspects of the watches.

@AndreChaosweapon 2 жыл бұрын

1 year later, KZfaq recomended this masterpiece to me, the back MUST BE transparent/clear to show how beautiful is! great job, +1 sub from Brazil!

@DhrSpies 3 жыл бұрын

You did a great job, coming from a watchmaker. After replacing a balance staff you always have to rebalance it without and with the hairspring. Low amplitude most likely is from pivot wear, a weak non s main spring, arbor wear stuff like that. Hair springs always stay a little tricky, even after all my years of being a watchmaker. The key is to work from inwards to outwards, first make sure all the windings are evenly spaced, then make it flat, also don't forget to make it centered correctly :) . These old hair springs are always a bit finicky to adjust because theyre so weak in comparison of all the newer alloy hairsprings. Best to do is buy some old alarm clocks and practice hair spring bending with these, they are generally bigger on those kind of alarm clocks, so its easier on the eyes.

@WristwatchRevival 3 жыл бұрын

Thank you! Really appreciate the advice!

@jwaterous224 Ай бұрын

I’ve been watching your productions for a while and was delivered this gem today in my YT Feed. I find your voice relaxing and the work you do with added commentary to be relaxing and a nice bit of technical challenge to observe.

@nyckhampson792 4 ай бұрын

That fix on the balance staff , and the skill, caution was sublime. I like the way you air on the side of caution and never rest on your laurels , its what will make you a very good watch repairer/servicer. I'd happliy trust you as others will with high end timepieces. Well done Marshall

@johnrogers2253 3 жыл бұрын

Mark taught me the lining up process of the impulse jewels. Great.

@samwalker7821 2 жыл бұрын

I learned to repair old pocket watch movements pretty much the way you have, thru trial and error. I bought some excellent books and read them throughout before I even touched a screw. It's a delicate but exciting thing to replace a balance staff and get an old balance to vibrate again. Sometimes the staffs just aren't available and you have to find something close you can modify. Balance pivots, jewels and staffs also come in different sizes and the balance pivots need to be polished down for a proper fit. Every time I replace one I'm just as nervous as the first time I did it 40 years ago. I'm in awe of the old school watchmakers and the skill they possessed! I remember reading somewhere that ln the first decade of the 20th century there were only about a dozen watch adjusters known that could adjust a Railroad Watch to all positions. I'm happy just to get one to run well! Thanks for the great video. It's a pleasure to watch someone else repair a fine movement!

@drmoss_ca Жыл бұрын

And now I understand the square of clear tape on your work surface: it marks the place that's in focus!

@sonvu9756 3 жыл бұрын

Such a beautiful pocket watch! Its always good to see such beauty like this brought back to life again after decades. And also, beautiful movement, I love big pocket watch movement like this, nowaday they just dont make movement with separated bridges anymore. I also got one myself, its a Vulcain Grand prix pocket watch in all excellent condition, almost like a new old stock, the movement runs at a nice 280-290 amplitude on full wind, so good that I dont even have to service it, all that for just about 110$. I am also lucky to find a skilled watchmaker in my town, he once repaired and serviced a watch for me that its ended up took him to create a new balance staff (yes he did have to make a new one because couldnt find replacement part anymore). In the old days these staffs definitely get worn or broken alot since there was no shock protection systems invented yet, so I guess dealing with broken staff is really common for old watchmakers and even making new parts on their own, watchmakers are really so skilled back then. Now we have alot of people who try to charge you for a watch battery replacement job for 10$ :((

@amme30 3 жыл бұрын

Great video, what a beautiful watch with a lovely history. Also I really appreciate the clarity of the commentary and the excellent shots and editing. Thank you.

@mikemalliski8380 3 жыл бұрын

It always amazes me the age of theses watches and how very small and minut these parts are. How were these tiny parts made back a hundred or more years ago....and with the tolerances of those parts.

@russculley3619 2 жыл бұрын

Impressed or what! I have been trying refurbish watches as a hobby for about 4 years now, all completely due to watching Mark Lovick with his remarkable skill. Watching you replacing the balance arbor was way ahead of where I am and I commend you for that, simply we'll done! I still quake at oiling the end stone's. Very impressed!

@randallmarsh446 2 жыл бұрын

This is the first video I have ever watched on the repair and workings of a watch ever. For me to sit still and watch any you tube video without loosing interest is a feat in it self. Thanks you have added fuel to my interests in building a mechanical clock .

@1959Berre 3 жыл бұрын

One of the best watch channels. Always a nice surprise.

@alfredbutler2612 2 жыл бұрын

Marshall, your extra-pleasant delivery, commentary is such a joy, plus the effort made to share your humility and love for the horological work you do a great job producing! Very much appreciated!

@413Dimitri 2 жыл бұрын

About to clean my local consignment shop out of old watches just to open them and look at movements. In all seriousness, I don’t think I could sit for 45 minutes on a video, your channel is the only one I can commit to on that for the sake that I learn something new every time and you do such a great job at it. Keep going up and keep it up!

@rickcroucher 2 жыл бұрын

I don't see it as a waste of time. It's very soothing with a final since of joy when the watch comes to life. Thank you for posting.

@Ricky.913 3 жыл бұрын

Congratulations Marshall, on getting that beautiful time piece ticking again!! Nicely done. Take care

@darrelwillman3158 3 жыл бұрын

Marshall congrats on that balance repair. I know your joy. I don't even breathe hard around a balance; the thought of disassembling one is mind-numbing. Nice work.

@tedblack2415 3 жыл бұрын

Much respect for tackling the staff job i don't think i would in a million years & lovely watch with an interesting background and history .

@josmo506 3 жыл бұрын

Love your channel, I learned all by myself the same as you did and I really enjoy your videos. I personally dont care much about protecting watch parts during disassembly if im going to wash it right afterwards. And if I may give just one advice, maybe the base of your stacking tool is not the best place to assemble cleaned parts, in your great macro shots you can see the holes accumulate particles and actually one tiny fiber was transfered to your cleaned, freshly oiled balance components.

@judyhobday4760 2 жыл бұрын

I started watching your videos very recently and every one is as interesting as the last one. You are so honest with your progress and steps you take throughout the process.

@smarthome2660 10 ай бұрын

I am not a watchmaker, but I have done some minor repairs on two of my watches in the past. Both were Casio Jogger watches from the 1980's. I watch you do these repairs because it is relaxing. When you got to the part @10:00 and couldn't remember the part name, I was saying Yoke Spring like you could hear me. I have only watched you do approx. 8 repairs. I also watch you as a memory building exercise because I have had a few mini strokes. You have helped me tremendously, so I will return the favor and subscribe. Thank you Marshall. Edit: When you mentioned what part is satisfying, mine was when one of the several super tiny c-clips fell out of my Casio Jogger watches when I opened it to change the battery, it flew off the table and landed on the carpet. The c-clip was the size of a pin head, and the same color of the grey carpet. It only took me 15 minutes thankfully.

@MrPINKFL0YD Жыл бұрын

I watch a lot of these but do not comment much. Another one saved. Well done and new skills learnt!

@domwilson1165 2 жыл бұрын

You are such an inspiration for someone starting out on this amazing hobby, thank you.

@philgiglio7922 Жыл бұрын

That's a truly beautiful movement, both sides of the main plate are decorated

@charlescarter6146 3 жыл бұрын

Sir, the tools and supplies you use in your work are amazing. Some of them I never knew exsisted. Thank you for sharing this.

@andrewgillis3073 2 жыл бұрын

My grandfather worked for the railroads as a young boy, through WWII, and into the 1950s. When he died we found he had a beautiful Elgin watch with engraved hunters case and machine decoration on all the bridges. I’ve never seen anything as well in modern times.

@johnwaddell4107 2 жыл бұрын

Observations: 1) patience of Job 2) photographic memory 3) very efficient, thorough, methodical 4) excellent teacher. More but I can’t remember! Thank you for sharing!

@WristwatchRevival 2 жыл бұрын

Thank you :)

@mrimmortal1579 7 ай бұрын

To be fair, as Marshall has explained in a few of his other videos, “photographic memory” is accomplished via a photographic camera lol. I’ve heard many other watchmakers say that (at least in the beginning) it really pays off to take pictures or videos of what you’re doing every step of the way, in order to make it easier to put things back the way you’ve found them. From there, it only takes some decent editing skills and a good personality to narrate your way into having a successful KZfaq channel!

@AnthonyRBlacker 2 жыл бұрын

I think you're a better person knowing your boundaries, 10 seconds, honestly it's a pocket watch, to be set every morning anyway. Great great job!! So much fun watching your channel Thank You!!

@martineastburn3679 8 ай бұрын

My Dad now passed was born in 1921. His saying when you drop something on the floor was "drop your watch ?" He was a pocket watch guy until his AT&T 20-year watch with alarm on it with date. Job change and level. Retired as VP Design AT&T. His designs are protecting us from unwanted missile strikes.

@meteoman7958 2 жыл бұрын

I have a vintage Birks pocket watch that was presented to my Grandfather in 1954 on his 75th birthday. It appears to have spent all of its life in a drawer as it looks mint. It does run.

@agoose6277 3 жыл бұрын

I'm a simple man. I see a new Wristwatch Revival video and I click like.

@WristwatchRevival 3 жыл бұрын

See that's why I like you Goose

@WatchmakerErik 2 жыл бұрын

It's the done thing because its always deserved.

@alexandrsherbakov9878 Жыл бұрын

You are not just a watchmaker, you are a very creative person, and this is more than just a Master. Respect.

@madmike6942 2 жыл бұрын

i have a friend here in my country.. he is a watchmaker olso... certified swiss watchmaker....he was in school in Switzerland... i often go to see him and watch him fix or service watches... what a blast... 2 days ago he serviced a 35k euro breitling... i was like a kid watching him service that watch

@zbigniewgurak8261 3 жыл бұрын

What a beautiful movement... Eterna : " I am the Legend".

@philiprice7875 2 жыл бұрын

what i enjoyed about this restro was you did not make out that you was super human, you admitted it took time and that you had messed up the 1st attempt and had to reseach and find out a correct method . kudos for doing so

@coffeeisgood102 3 жыл бұрын

Congrats. You pushed your boundaries now you reap the reward in the satisfaction of a job really well done. This video really came at an excellent time as I recently purchased a Timothy Eaton railroad grade watch from the turn of the century. It has a Gallet movement which is keeping time to within two seconds per day after I had it cleaned, oiled and adjusted. As you probably know, Eatons was a Canadian retailer no longer in business. I’m looking forward to more videos of yours. Keep them coming.

@dannyjacobsen1677 2 жыл бұрын

I understand your joy. I have been a watchmaker for 30 plus years.

@ianaristotlethompson4186 Жыл бұрын

Such a joy to repair one that’s broken.

@Emilmarch 3 жыл бұрын

I have been learning a lot from you, thanks man. For the crystal, a simple solution to keep original, under sun light or UV light spraying some hydrogen peroxide. I am scared to dip it in it cause I am scared it may harm or not but it definitely removes yellow tint.

@thomasbruinsma 2 жыл бұрын

I found your channel a week ago. I am now having itchy fingers wanting to buy a pocket watch and some tools, just to see the inside for myself.

@DrCrabfingers 3 жыл бұрын

One of my favourite channels...this man gives me heart...currently servicing an skxoo7 and on a journey of discovery. This chap, The Nekkid Watchmaker and Mark Lovick are my total inspriration.

@jonrutherford6852 8 ай бұрын

Watching this for the seond or third time, I'm pleased once more by your respect and enthusiasm for the history of these timepieces. Also impressed (again) by the extraordinarily good macrophotography as well as overall production values. Thanks for making these civilized and absorbing videos available!

@grahamsmith5780 2 жыл бұрын

Nice enough to make you go out and buy waistcoat and chain! Love your videos, thank you.

@carlubambi5541 3 жыл бұрын

Good resto as a Canadian, I am proud of your work

@WristwatchRevival 3 жыл бұрын

Thank you :)

@kevineverett3258 2 жыл бұрын

I got onto this hobby from your videos. It is so relaxing and stressful at the same time. I have shot so many screws across the room trying this lol. I also prefer hand winding the mainsprings though myself. Thanks for all the knowledge you have passed on inadvertently.

@LethalBacon479 2 жыл бұрын

That was amazing how the crown was installed without having to remove the back again! ;) Love your videos, fantastic work! You're also close to home, mayhaps I'll see if I can send you something someday. I love all things mechanical, particularly petrol powered devices but the miniature workings in time pieces have always fascinated me.

@johnnycash1780 2 жыл бұрын

I would very much like you to work on my old pocket watch. I had a so called repair shop work on it abou 30 years ago and it didn't even run for a month,when I took it back they said their repair person had quit and they would look at it. So I just put it up. I have not located anyone in my area that still works on them. I would like to get it working to give to give to my youngest grandson for his graduation. I have had this watch for more than 60 years. It was given to me by an old man that was just like a father to me. .

@nigelholland1811 2 жыл бұрын

Gradually catching up with your videos Marshall. have to say they are very satisfying and love the anticipation of seeing these old watches come back to life.

@markbyrum4743 3 жыл бұрын

Good job I used to own my grandfather's Elgin pocket watch from the late 1800's. Sadly I can no longer find it. I'll keep looking and hopeful will be able to service it someday. Good vid. Keep at it!

@geekdomo 2 жыл бұрын

9:30 - I see so many watch channels using autofocus for filming. Glad you figured it out! Manual all the way.

@patrickvliet285 9 ай бұрын

hello Marchall, i am patrick from holland, and i watched almost all your meditating video's. yeh it is very relax, and helps me to remind myself ,who watches are so not easy to esamble, and i do lighterbuilding (porsche desing lighters) and i have notist that it go's whe easyer!!!building. So thx to you, greeting from holland,....patrick

@samrweall 2 жыл бұрын

Thank you so much for the wonderful detail you put into videoing, editing and narrationg of your videos. I have slowly purchased some tools and have just completed my first successful restoration. 1:2. Patience is key.

@jed1947 3 жыл бұрын

So nice to learn a new skill for you - balance staff replacement!

@donevans1884 Жыл бұрын

fantastic video , gorgeous watch , i could watch you work all day , brilliant .

@chrisstonestreet7135 2 жыл бұрын

Beautiful pocket watch, and with an awesome history. I picked up several pocket watches by chance. One 1909 Elgin I wish I could send him to get fixed... and see how he fixes it/what is broken within. Like to hear his analysis process when he approaches a new challenge.

@TheSilentsniper1973 Жыл бұрын

Thank you again Marshall you're a true artisan

@esteban8840 3 жыл бұрын

33:46 A bigger plate takes less time to install in a factory, Great video! It’s good to see you evolve in this grade hubby👍

@WristwatchRevival 3 жыл бұрын

Ah good point!

@gord8382 Ай бұрын

I'm a WWR addict also, getting closer to explore the hobby, I just wish at 58 my eyesight was better. I would have to start out with the special eye pieces to help me see. Not sure I want to start out a hobby like that. It doesn't stop me from watching. :)

@medea27 2 жыл бұрын

I just love pieces that have a wonderful story that you can trace back, it adds such character & colour to an object 🤍 I just wish there was a way to move the hands to the back & use that beautifully engineered movement as the dial.... allow you to see all the wheels & springs working in all their vintage glory!

@mgdesigns37069 2 жыл бұрын

This is so cool, my Mom's uncle was a Head Designer for Birks in Montreal, about the 1920's-30's and now I am a hand engraver. Maybe Uncle Max actually hand engraved that watch. Very cool. Thank you.

@pauldiplock205 3 жыл бұрын

What a wonderful 55 minutes of enjoyment. Don’t worry about the accuracy...... she is a beautiful object as she is.

@mainarbor8416 3 жыл бұрын

Oh man LOL we use the same analogy,,,, para- "Cant get mad and throw things. Its satisfying to throw a wrench in auto repair."

@marklindsey1995 2 жыл бұрын

We won't talk about @53:41. Overall excellent work and content. Many more years of success to you.

@Pythonaria 3 жыл бұрын

When you took the back off the watch my reaction was "Oh wow! PRETTY". Thank you for uploading this video.

@bobfugazy4916 2 жыл бұрын

Nice one Marshall. That base plate was a work of art.

@anthonysaponaro6318 2 жыл бұрын

I have always loved to take things apart, including watches just to see what makes them go , never in my wildest dreams would I attempt to try to put it back together . . . . . .soooooo who wants all my watch parts :) Cause I get almost as much pleasure watching you do this and explain each part and sometimes what their particular job is because that may help me to identify what each thing and what it does and that will help me decide where it goes , cause I need to know what it does to know where it goes :)

@stephenrose8188 2 жыл бұрын

This is a really super video! Especially as (by your own admission) you are learning rather than a lifelong expert with 40 years in the craft. I'm a lifelong engineer, machinist etc (mainly bigger things) but as a real beginner in this field I really appreciate what I have seen here. I have always made very small parts when projects have called for them but watch movements are a further leap into the next stage of accuracy and delicacy. My first time piece was actually a ships clock, (family clock) and I made a new escapement wheel from scratch in Nickel, took me ages and ages! Problem was I had only a damaged original to copy and most teeth were damaged. Actually made three to get one to run properly, but oh my lord how satisfying that when the clock has run it's eight days and needs rewinding the very first click of the ratchet and the clock starts! I jumped up and down in my workshop like a kid at Christmas. Although the clock is very large in comparison to the watches of course the part I made was only 5/16th" in diameter and the shaft at the smallest diameters was only 0.017". I am an instant supporter and have subscribed! Thank you so much.

@depp657 2 жыл бұрын

your voice and words dish out a fair amount of nice vibes bruv. keep up the lovely work, mate. not aiming to do any of that watch repair stuff, but a bit interested in the beautiful and precise craftmanship. actually am painting right now and having you talk in the background. long story short.. thanks a bunch, good sir

@local.gay.writer 2 жыл бұрын

**casually rewatchs all your videos due to 'mild' obsession with watches due to your videos-** best part about having faulty brain wiring is unless I hear/see something 3 times or more I will not remember it in a week ✋😌

@bowerbirdstyle7661 2 жыл бұрын

Lovely watch sympathetically restored.

@jthepickle7 2 жыл бұрын

The magic of the timepiece, for me, lies in the mainspring and hair spring. The Je ne sais quoi of 'spring' in spring steel.

@jsollowsphotography Жыл бұрын

I enjoy watching your videos. I was watching this one while restoring a 1926 camera back to working condition. Don’t worry about distracting me, when your video was running I was hand grinding a new ground glass focusing screen. Its mind numbing work so your video was perfect 😂 It’s interesting to see the similarities between vintage watch restoration and vintage camera restoration!

@williameckert306 Жыл бұрын

I’m so impressed with the craftsmanship…..something I could never accomplish.

@RobertFay 2 жыл бұрын

*- "A huge step for me." What fun for us. Congratulations ! ! !*

@jimalcott760 2 жыл бұрын

Thanks for your great videos. You have remarkably steady hands… and patience…

@shannonharris2816 2 жыл бұрын

Good presentation, very personable delivery.

@TheOcculus 9 ай бұрын

So many people have so little patience. I work on everything from Small Engines through various pieces of farm machinery. My grandfather taught me that it doesn't make any difference to the machine whether you're angry or not. No sense throwing your tools around looking like you have no self control. When it starts to get frustrating step back take a look at it and see if there's another avenue that you can take to get after it. I have a $64,000 vocabulary and I tend to use it but I don't throw stuff. That's a good way to lose tools without being any closer to fixing the thing.

@kowaltoboggan 3 жыл бұрын

You are an inspiration, Marshall! Really appreciate your explanations. Your vids are some of the best infotainment on the web! Just me, but would love to see a tour of your tools and explanations on how and why you chose what you did. Thanks for putting so much time and attention into your hobby!

@WristwatchRevival 3 жыл бұрын

You got it, I'm working on just such a video now!

@reesedundee8525 2 жыл бұрын

hasnt been a video yet i havent had a smile ear to ear mate. hope to restore my grandfathers seiko oneday so ill keep tuned in with a close ear :) , subbed x

@mrclassic2284 3 жыл бұрын

Congrats on the balance staff replacement!

@WristwatchRevival 3 жыл бұрын

Thank you! I really feel like I need a bit more practice but I'll take it for now :)

@squidkid2 Жыл бұрын

There looks like there is some runout in the balance wheel. I imagine that even though you were successful in pressing in the new balance shaft I suspect it's not quite at a 90 degree angle to the balance wheel. They probably make a jig to hold the shaft while out of the watch housing that would let you turn the balance wheel and correct the run out. This probably wouldn't be as difficult as it sounds if you had a tool made for that job. I bet that checking runout is a common task on older watches that need shaft replacement. Even though you probably don't see broken shafts on shockproof movements I'm sure it's a common failure on vintage watches. You're right about the works frame being beautifully made.

@garygraham6020 2 жыл бұрын

Amazing! Didn’t know until your comment that this watch was a year long project!

@lohsemichael6398 2 жыл бұрын

To watch you, is for me like a Vacation. Greetings from Germany Michael

@harrickvharrick3957 3 жыл бұрын

Gorgeous indeed. That row of bridges so nicely lined up, I think that that is simply unique?

@JN-gc3jp 2 жыл бұрын

Hi Marshall, I really enjoy your channel - thank you for sharing these videos with us. I especially enjoyed this Birks watch episode, as I also received a Birks (wrist)watch on my 25th service anniversary with Bell Canada (kinda like the AT&T of Canada) in 2006.

@ABC-rh7zc Жыл бұрын

Beautiful watch and well worth your time and effort

@RichardT2112 3 жыл бұрын

Very cool. Would be so nice if you can find his grandchildren or great-grandchildren.

@TDIMAXDIESEL 3 жыл бұрын

It should, there is a lot of Cartier around Drummondville !

@WristwatchRevival 3 жыл бұрын

I would love that yeah, but I'm not so great with that kind of stuff

@fnersch3367 2 жыл бұрын

I should have you look at my 1943 Hamilton navy watch. It has a sprung hairspring and a mysterious spring end poking out from under one of the bridges yet this thing runs. It looks very clean on the inside. This watch was used continuously from 1943 (when issued to my grandfather) until his death in 1970.