Blacksmithing - Making stitching irons for leather working

Рет қаралды 310,001

2 жыл бұрын

In this video I make stitching irons that you use to pierce the material when sewing leather. This was a very satisfying project, but also a challenge, since I don't own a mill, but with some creative thinking I was able to pull it off anyway. I believe these are similar to traditional Japanese style irons with a 45 degree slant on the teeth.
Check out my recommended tools/gear:
www.amazon.com/shop/torbjorna...
Get the leather apron I wear here, use "Torbjorn10" at checkout for 10% off :
bit.ly/3lutfMn
If you like my videos you can support me at:
/ torbjornahman
For more info:
/ torbjornahmanblacksmith
/ torbjornahman
www.torbjornahman.se
#leathercraft #leatherwork #toolmaking

Пікірлер: 824

@jamesdouglas4035 2 жыл бұрын

I have done leather work for four years. I have done a lot of holsters, knife sheaths, purses, wallets, etc. I wish I had a set of stitching punches that well made and pleasing to look at. You amaze me. I've watched you for about the entire time you've been on. I'm 65 years old and still get goosebumps watching your work. I wish everyone was as dedicated to exacting standards as you are. I have an FAA certification in Airframe and Powerplant mechanics and was a Union millwright for thirty years. I've seldom seen anyone better than you at your work. Keep it up, you are an inspiration. Old Man Andy @ Crimson Elephant Forge Knives and Leatherwork.

@torbjornahman 2 жыл бұрын

Wow, thank you James! That's so nice of you.

@jamesdouglas4035 2 жыл бұрын

I mean every word. O.M.A.

@123456789046650 2 жыл бұрын

That is what is said here in Serbia - Crazy pedantry. I hope Google translated well.

@theseconddarrin3788 2 жыл бұрын

Well said. Watching this man make what most people have to buy is inspiring. 👏

@sopalen 2 жыл бұрын

@@torbjornahman You should make one for him :), and make a video about it. (or maybe not depending on situation).

@mymechanics 2 жыл бұрын

I loved the way you used the lathe to mill the slots. Creativity is the difference from a really good machinist to a normal machinist. Also amazing technique to temper the part on the red hot part. That worked out very well and ended up beeing super accurate.

@paulmartinez9908 2 жыл бұрын

My Mechanics! Wow you watch this channel too!? This is the best Saturday I’ve had in a while! You two should do a collaborative video, it would be an amazing historical event please! Gods Speed to Both of you masters!!

@Hedazu 2 жыл бұрын

@@paulmartinez9908, I second your initiative, watching these two proffesionals doing something together is something out of this world. Hope it happens

@melkornumenor7504 2 жыл бұрын

collaboration, collaboration, collaboration !!!!!!! 💪💪💪💪💪

@torbjornahman 2 жыл бұрын

Thank you very much!

@mymechanics 2 жыл бұрын

@@paulmartinez9908 this is my ASMR 😉👍

@scottvercuski8993 2 жыл бұрын

awesome !!! love the little tip on how to get rid of the high pitched squealing from filing !!

@torbjornahman 2 жыл бұрын

Great! Thank you!

@howler6490 2 жыл бұрын

I would have put it deeper into the jaws.Always have.Won't anymore. Grand stuff as always. It's a brave man who films his end product under a magnifying lens.

@Tom-hz9oc 2 жыл бұрын

@@torbjornahman That’s such an easy solution. Thank you!

@deconteesawyer5758 2 жыл бұрын

Call me slow but after going back twice I still fail to identify what you refer to as a "tip" to reduce filing vibration.

@Tom-hz9oc 2 жыл бұрын

@@deconteesawyer5758 At the 6 minute mark he put a small plastic clamp on the piece. It stopped the squeal.

@user-dg7sy8cz3b 2 жыл бұрын

The lathe milling machine improvisation is great! A friend recently told me this: “ In Brazil they say if you don’t have a Dog you hunt with your Cat.” I believe this is a perfect example. Thank you for another great video Torbjorn!

@torbjornahman 2 жыл бұрын

Ha ha, that's a great saying! Thanks

@user-dg7sy8cz3b 2 жыл бұрын

@@torbjornahman Your welcome! Thanks to Hector, my 89 year old fly fishing friend, from Mexico, l met camping at Taylor Park Colorado this summer. Thanks Hector! You’re wisdom lives on.

@dixonqwerty 2 жыл бұрын

In the bed now, watching the video. Life is gooood. :)

@CrimsonCustomGuitars 2 жыл бұрын

That last tempering trick was the icing on the cake, thanks for this! Subbed.

@torbjornahman 2 жыл бұрын

Thank you very much Ben!

@5W5Y5 2 жыл бұрын

Oh I think my favorite part was watching the temper move through the steel. That process always amazes me to watch the steel change color as you are changing the structure and able to watch it real time as you said.

@nickp.777 2 жыл бұрын

As a quarter Swede I must say it is absolutely beautiful there! I wish to go there at some point in my life!

@torbjornahman 2 жыл бұрын

You should! :)

@bentoombs Жыл бұрын

I always love your videos. Great craftmanship. But that clamp trick to stop the vibration when fileing. Genius. Thanks Thunder bear🤟🍺

@samcoote9653 2 жыл бұрын

You say that machine isnt meant to be used like that, but I've seen crazier setups!!!! But I think I would trust yours 100 times more than my own! good thinking!

@jris 2 жыл бұрын

Your smaller hammer machine sounds like an angry sewing machine and I love it!

@JustJimWillDo 2 жыл бұрын

A fork for eating French fries and a fork for eating potato wedges. Excellent work.

@johnjude2685 2 жыл бұрын

After 3 years as Hobby BlackSmith and lots of KZfaq watching my first viewing of something I built before you inspiring me to do. I am no master but I used lawnmower blades for steel and of course you are still the Master but mine does well enough but not beautiful crafted. Thanks and I will watch hard to help me improve. " Thanks Master "

@billlee5307 2 жыл бұрын

Thank you for letting us watch you think and work.

@jeffputnam8554 Жыл бұрын

I am always fascinated when I watch someone of your caliber of craftsmanship.

@ajbowers44 2 жыл бұрын

Whatever you charge, triple it. This is one of the craziest things I’ve ever seen.

@torbjornahman 2 жыл бұрын

Thanks :) I don't make any for sale!

@arianatorbutera9152 2 жыл бұрын

I found this channel thanks to Un Poco de Todo, and it is a gem! absolutely incredible!

@torbjornahman 2 жыл бұрын

Thank you!

@digitaIgorilla 2 жыл бұрын

4:17 "... like that mountain lake. It was so clear, Jenny, it looked like there were two skies one on top of the other." - Forrest Gump. Serenity. ❤ Also, I am completely in awe of this build and your attention to the shape of the tynes. 😲

@alexkunzelman5825 2 ай бұрын

Hell of a job .. that's excellent craftsmanship , hats off to ya

@adamengland2519 2 жыл бұрын

I love to what you forge. I learn something every time. Using the flat bar for heat treatment is an technique. You inspire me with each and every one of your videos. Thank you.

@torbjornahman 2 жыл бұрын

Great to hear that! Thanks

@user-iw5ln8jl8k 2 жыл бұрын

Another awesome project my friend. You are certainly a artist and fine family man. Russ Pennsylvania USA

@Rouverius 2 жыл бұрын

Wow, clever use of a lathe! Excited to see how these new tools will be used in the future.

@alandrewgibson 2 жыл бұрын

WOW!!! no wonder they are so expensive that is your reason right there - what craftsmanship!

@torbjornahman 2 жыл бұрын

Thanks!

@horatiohornblower868 2 жыл бұрын

This is blacksmithing lifted to a degree few people will ever reach. Simply awe-inspiring!

@torbjornahman 2 жыл бұрын

Thanks!

@neilgillmore Жыл бұрын

The Magick is good too.

@iftekhar7266 2 жыл бұрын

Excellent craftsmanship indeed!! Mr. Ahman, you deserve our deepest appreciation & applause. Tons of love from Pakistan. I believe you are a qualified Metallurgical or Mechanical Engineer; as the intricacies of your work indicate. Blessings ahead.

@RobertFay 2 жыл бұрын

*- So very nicely done.* *- The intelligence and music within you shows . . . and the machines and metal like to work with you.*

@TerrolAxelor 2 жыл бұрын

Do you ever step back and say, maybe I made this too perfect? just incredible

@torbjornahman 2 жыл бұрын

:) Not really, but these came out unexpectedly well.

@vo4tap 2 жыл бұрын

Я подписчик со времён нескольких десятков тысяч, и каждый ролик я смотрю с огромным удовольствием. Даже смотреть на все это приносит удовольствие эстетическое. А то что вы мастер это давно понятный факт) Спасибо за контент!

@mkivy 2 жыл бұрын

U r a master! Hello from Surfside Beach SC. I live a mile from the beautiful Atlantic Ocean. So hey from the beach…I have been following you for a good while and you never cease to amaze. Your work and skill are fabulous…thank you sir for the videos/demo… take care and be safe.

@torbjornahman 2 жыл бұрын

Thanks Mike!!

@Acampestre 2 жыл бұрын

I guess what we don't see, is the amount of thought and peparation that goes into your work. What we do see is the dedication and the meticulous way in which you realize your projects.And if that wasn't enough you present that in such a perfect way. Very well done. I take a bow and thank you for making the effort and taking the time to share it with us.

@torbjornahman 2 жыл бұрын

Thanks! Yes, it took a couple of days of experimentation to get the teeth right...

@buckwildebeest398 2 жыл бұрын

10 of 10 for attention to detail, and level of care.

@genabookin128 2 жыл бұрын

Wow! new apron! Congratulations!)))

@Lazander-Blacksmith-Region70 2 жыл бұрын

Perfectionism is definitely about you! Very cool!👏

@mapo5976 2 жыл бұрын

What soooooo many YT creaters seem to not understand when filming their work is that you need close up photography. Sometimes really close up shots when needed. You have "got it". Very professional. Close up when needed and multiple angles. Thank you for your trouble. It's a pleasure to watch your skill /work.

@torbjornahman 2 жыл бұрын

Thanks!

@speedsterwinston 2 жыл бұрын

That is absolute artistry! This video for the win!

@torbjornahman 2 жыл бұрын

Thanks

@christofs-a1834 2 жыл бұрын

It's the spring that keeps on giving!

@humancattoy7767 2 жыл бұрын

I love the Thunder Bear magic excerpt. You have a beautiful country. I'm happily stunned.

@bones357 2 жыл бұрын

The geometry on the tines is next level, it's like an optical illusion!!👊😳🤯

@tevya017 Жыл бұрын

I grew up in the hands on engineering world. Good to see there is still real skill about. Bit pricey to invest in smithing equipment and develop the skill to make my own pricking iron so I'll stick to eBay.

@davidgillies620 2 жыл бұрын

I honestly think your range of skills must be inexhaustible. One day there will be a a TA video: Nuclear physics - Making a fusion reactor torus.

@torbjornahman 2 жыл бұрын

@harryvanniekerk7269 2 жыл бұрын

Thankyou Tjoborn. I was wat i wanted to no more about, Regards,.It simply was poetry in motion. Greetings!

@scottmayfield8229 2 жыл бұрын

Not only àre you a amazing blacksmith you are a amazing craftsmen too, your attention to detail is outstanding. I love your videos, the touch of humor your add is great. Looking forward to you next project.

@torbjornahman 2 жыл бұрын

Thanks Scott!

@erikcourtney1834 2 жыл бұрын

Your magic filming never Ceases to amaze me.

@paulwestlake4278 Жыл бұрын

Ticks all of my boxes. Beautiful work.

@torbjornahman Жыл бұрын

Thank you!

@ARI-og5ze 2 жыл бұрын

I was looking how to make those things for so long and I've just saw your video by accident 😍

@torbjornahman 2 жыл бұрын

:) Cool

@mikebashford8198 2 жыл бұрын

Using a clamp to stop the workpiece screaming when filing is a brilliant idea.

@eugeneross6624 Жыл бұрын

This is the only kind of spork that is at all useful. Beautiful work.

@HappyDane484 2 жыл бұрын

That trick with the spring clamp blew my mind! Definitely going to file that one away for the future.

@stevepuyear2738 2 жыл бұрын

That was genius using the lathe and tool rest for a precise little mill. 👏👍✌🙏

@1958PI 2 жыл бұрын

Metal work at its finest!

@SchysCraftCo. 2 жыл бұрын

Awesome. Can't wait to see ur next videos. Keep up the great craftsmanship and hard work my friend. Forge on. Keep making. God bless.

@erhan6095 2 жыл бұрын

This precision and beauty of things kills me.

@MarcioDeSouzagoldensax 2 жыл бұрын

this is a real work of art.

@brucemitch928 2 жыл бұрын

Machine precision by hand, very nice job 👍

@misterpurist1040 2 жыл бұрын

I clicked to watch the headlines.. Ended up watching the whole video with every bit of concentration I have !! You are still raising the bar..

@torbjornahman 2 жыл бұрын

Thanks!

@samcoote9653 2 жыл бұрын

OK! That trick using the clamp to take the vibration out of the iron while filing is a revelation for me! oh man I hate that when Im making a part! That lake is absolutely gorgeous!!! Thank you for showing us all yet another awesome project !!

@torbjornahman 2 жыл бұрын

Thanks!!

@weberth_lima 2 жыл бұрын

the care with the finishing of the piece is very good.

@brucek6563 2 жыл бұрын

Wow!!! That was a lot of work, especially the intricate work. Those tools are perfect!!! Impressive!!! BTW, your magician skills are awesome!!

@happyvaper5748 2 жыл бұрын

Tobjorn. You never fail to capture each and everyone of our (your subscriber's) absolute attention's with your immaculate skill's and ability to perform then inject fine detail in'to each and every task your undertake. A spring given new purpose and life by a Master craftsman and reborn to be of great value and a tool which shall serve it's purpose well and last forever. Truly amazing. Peace and Love to you and your's Sir.

@siggaspazz 2 жыл бұрын

The time and patience you spare to make your tools is one thing but the time you take for yourself in between usually makes me go for a walk or tend my garden. These aren’t just tools in my eyes but works of art. Your makers mark will truly live on.

@kuemp 2 жыл бұрын

The tea was perfect...like your art.

@mounir101 2 жыл бұрын

I like you make stuff actually, and each stuff is, somehow, better than the last. Thanks and may you always be successful.

@davidbeem184 2 жыл бұрын

Those are a work of art! I've never seen punches so perfect in the 45 years of doing leather work!

@torbjornahman 2 жыл бұрын

Wow, thank you!

@peterc4056 2 жыл бұрын

You always work with such foresight, planning, and meticulous attention to detail. It's inspiring to an amateur like me.

@paulmartinez9908 2 жыл бұрын

Oh my..YOU SIR ARE KING!! I was wondering and hoping so badly to see these after I saw your half moon, and awl..this is amazing and are worth more way more than anything Sinabroks/Blanchard/Roke could ever put out there..amazing thank you so much for this

@torbjornahman 2 жыл бұрын

Wow, thanks!

@adelheidsnel5171 2 жыл бұрын

Flawless and crisp, as always! You and John Rigoni are my example. Anyone can beat the crap out of steel, but few are able to perform magic.🔥

@rajeshsoni870 10 ай бұрын

Finest workmanship n skill.

@Baggytrousers27 2 жыл бұрын

Words are currently failing me, this is, quite literally, *Art.* The amount of care and precision you've shown is astonishing. Utterly beautiful and you should be proud of what you've brought (or rather wrought) into being. Absolutely marvellous.

@torbjornahman 2 жыл бұрын

Thank you!!

@ruirizzi 2 жыл бұрын

you're turning into a better blacksmith AND magician every video you post!

@squittymouse 2 жыл бұрын

My gosh, every kind of tool you create is absolutely perfect. I could stay here for hours to look each single step of your jobs!

@torbjornahman 2 жыл бұрын

Oh, thank you!

@a-yates Жыл бұрын

Damn I never thought about tempering thin stuff that way genius

@DoReid0 2 жыл бұрын

This is probably one of the best videos I have ever seen. Fantastic work

@torbjornahman 2 жыл бұрын

Wow, thank you!

@keithad6485 8 ай бұрын

In days gone by we called these tools 'pricking irons' and if used correctly make for very neat and easy hand stitching. From an Aussie saddle maker.

@petermiles8651 2 жыл бұрын

Beautiful work. I like the scenery you have there. Cheers Peter

@frisbeephil 2 жыл бұрын

You actually printed out my motto!!!! This machine is not meant to be used like this... I have spoken that phrase so many times while developing my products. One must think outside of the box. Part of why I'm so drawn to your skills and methods, because you're keeping alive so much that is traditional while adding your new spin to it. Much respect, for years.

@torbjornahman 2 жыл бұрын

That's great! Thank you!!!

@dillonfelts4020 2 жыл бұрын

These are incredible! I've been doing leatherwork for about 2 years now, and I would kill for a set of these amazing stitching irons!

@Madlintelf 2 жыл бұрын

You never cease to amaze me with your craftsmanship, everything you do is well thought out and executed. I learn so many little tricks and tips every time that I watch one of your video's. Thank you!

@weicheisen9999 2 жыл бұрын

You must be crazy to use a mill like this. But i love crazy people ! Great work like allways.

@alexfunke214 2 жыл бұрын

This was a great explanation of a very tricky process, with a beautiful result! And the walk to the lake during annealing was wonderful! Thank you!

@afyounie 2 жыл бұрын

I enjoy watching the leather work as much as the forging and farming. I think you need to use those punches to make a nice leather storage pouch for them.

@unboostedpueeblood 10 ай бұрын

My stitching chisel hid, due to embarrassment, after watching this awesome build. I think it felt a whole lot less important than these nicely made tools.

@carmelocrisafulli1493 2 жыл бұрын

Non mi stanco mai di guardare i suoi video. Perché mi piace la capacità e la professionalità che ha per realizzare gli oggetti

@InformatrIIcks 2 жыл бұрын

Thank ypu for that amazing trick to kill the screeching when filing something that has a bit too much stickout ! That is definetly going to be usefull in my workshop !

@gerardosantosgarcia3970 Жыл бұрын

Lo dije antes y lo repito, eres un maestro que no pierde precisión ni detalle en cada obra que realizas, muchas gracias por compartir. Un saludo desde Monterrey, NL, México...

@greedlike 2 жыл бұрын

It is good to see both your craftsmanship and magic skills improving!

@adrianelsner4936 2 жыл бұрын

Live CNC machine, I see it for the first time. What a precision. 😉

@joshuadelisle 2 жыл бұрын

Beautiful work Torbjorn! Very nice 👌

@torbjornahman 2 жыл бұрын

Thanks Josh!!

@ArtisticEndeavors 2 жыл бұрын

Even your utility tools are beautiful - thank you! ✌🏻🎨☕️

@andrewbeffa7467 2 жыл бұрын

Hello Susannah

@GordonPhillips 2 жыл бұрын

I have to say, the level of precision you show with that power hammer is amazing! The result of a LOT of practice. Great job!

@torbjornahman 2 жыл бұрын

Thanks!

@elizabethwentz8211 2 жыл бұрын

Such precision!! You are truly a master at your trade!

@corranhorn1189 2 жыл бұрын

Wow! It's the first time i saw you smile! It's a thing that colud change the universe!!!!

@torbjornahman 2 жыл бұрын

Haha!

@carrestore 2 жыл бұрын

I loved working with the iron lathe good job

@captaincavern200 2 жыл бұрын

I didn't think the shape of these teeth was so complex . Very nice work !

@torbjornahman 2 жыл бұрын

No not really, it look mor complex than it is. The taper of the tool makes you think there are angled cuts.

@randyhager2054 2 жыл бұрын

MASTER BLACKSMITH THUNDER BEAR!!! You always get my "LIKE" even before the video starts! You always amaze me even with your simplest projects.

@torbjornahman 2 жыл бұрын

:) thank you so much!

@funkojones2947 2 жыл бұрын

You could have went on the internet and bought a mass produced item that would have worn out or rusted in a few years, but instead you take your time and skill to create a masterwork tool that will not only serve you for your lifetime but may be passed down and used for generations to come ! Bravo, Wonderful and Incredible as always ! Thank you for sharing this with us.