Blast Gate Box with 2" PVC Ports!

Рет қаралды 27,618

4 жыл бұрын

This is my take on the blast gate box. I took inspiration from other videos, but made a few modifications to improve efficiency and work with 2" PVC.
If you're interested in plans for this build, leave it in the comments below. If there is enough interest, I will put plans together!
Give it Thumbs Up, Subscribe, Share, and be sure to check out the other videos related to this build!
- 2-Stage Shop Vac Dust Collection - NO CYCLONE!!!: • 2-Stage Shop Vac Dust ...
- Miter Saw Dust Collection Hood: / watch v=fOlxg8BUq9Q
- Miter Saw Station Build: • Miter Saw Station Buil...
Instagram: prattmadeth...
Music: www.bensound.com/royalty-free...

Пікірлер: 31

@Gray-Today 2 жыл бұрын

This is clever, and solves some problems. I like it.

@dalelong8692 2 жыл бұрын

Best way for making one I’ve seen so far thanks

@PrattMadeThat 2 жыл бұрын

Thanks for watching!

@philgoulding5219 3 жыл бұрын

Another great idea for hand built blast gates. I really like the plexiglass addition so you can actually witness how things are flowing. My saw dust collection set up is 2” pvc as well and this will firm in beautifully!Many Thanks

@PrattMadeThat 3 жыл бұрын

Thanks for watching Phil! Let me know if you have any questions when you build it yourself. Also, if you make any improvements, please share!

@mdlmickysdigitallab6499 6 ай бұрын

WOW well done

@dorianfulton7168 3 жыл бұрын

Nice touch with the plexi.

@PERRYS_PROPS 2 жыл бұрын

nice job, Thanks

@Samcraftcom 3 жыл бұрын

Looks great to me! Your video was the first that came up when I searched '2" PVC blast gate' :) I may have to copy yours!

@PrattMadeThat 3 жыл бұрын

Samcraft glad you found this video. Hope it helps!

@howardcissell6592 Жыл бұрын

I would like to have plans for this build. Thanks.

@patrickbeach5915 4 жыл бұрын

Well put sir, electrical tape was a good call!

@skuba15 4 жыл бұрын

Love it! I did see something similar on KZfaq a while back but now seeing you slightly modify it, I’m confident in making one for myself. Great job!

@PrattMadeThat 4 жыл бұрын

Thanks for watching! Its a pretty easily build, let me know if you have further question.

@enriquekristian7772 2 жыл бұрын

you all prolly dont care at all but does anyone know of a way to get back into an instagram account? I was dumb forgot my login password. I would appreciate any assistance you can give me!

@melvinerik6565 2 жыл бұрын

@Enrique Kristian instablaster :)

@enriquekristian7772 2 жыл бұрын

@Melvin Erik Thanks for your reply. I got to the site thru google and I'm in the hacking process atm. Takes quite some time so I will reply here later with my results.

@enriquekristian7772 2 жыл бұрын

@Melvin Erik It did the trick and I now got access to my account again. Im so happy:D Thanks so much, you saved my ass!

@richhalstedt7869 3 жыл бұрын

I would like to express my interest for the plans to the Blast Gate Box with 2" PVC Ports!

@zmurah 2 жыл бұрын

I've scavenged the internet for a good looking and yet functional blast gate box and I think I found it! Thank you for filming this --- I'm for sure using this for a number of different spots in my shop. Question - how is the electric tape holding up after almost 2 years? Thanks!

@PrattMadeThat 2 жыл бұрын

Glad I could help! The whole unit is as good as it was on day one! The tape is really sandwiched between the wood and plexiglass so nothing has seeped through. If anything was to fail, I thought it would be the gasket between the sliders, but they are still holding strong.

@prattm19 4 жыл бұрын

What kind of table saw is that you are using? Might be time to upgrade from my whopping big 8" ryobi bench top model

@PrattMadeThat 4 жыл бұрын

Its a Rigid R4512 from Home Depot. I have been very happy with it over the last 1.5 years, as it was my first real cast Iron table saw. BUT, I really only cut softwood (Pine), when I tried cutting 2" Maple, it bogged down quite a bit. Something to think about. Thanks for watching!

@MrT98672 2 жыл бұрын

This is really great! Nice work! Do you have plans?

@PrattMadeThat 2 жыл бұрын

Thanks Matthew! Sorry, I do not currently have plans available.

@scottbennett6981 3 жыл бұрын

Very cool. Do you use a shop vac for collection? If so, what kind? Thank you.

@PrattMadeThat 3 жыл бұрын

Yes, I use a Rigid Shop Vac. Check out my Dust Collection Setup video: kzfaq.info/get/bejne/fb6RZNZlnMjch3k.html

@jont5320 Жыл бұрын

Very cool set! How thick was your plexiglass that you used? Is there any loss of suction since you first built it?

@PrattMadeThat Жыл бұрын

1/16”. It has held up pretty well even today. I know there are losses at all the PVC connections since I didn’t glue or tape them, but that’s my preference to keep the flexibility and modify as I change the Shop around.