DIY Blast Gates for Dust Collection!

Рет қаралды 27,271

3 жыл бұрын

BUILD PLANS FOR SALE:
scottwalsh.co/collections/plans
Since moving into my new shop in the fall, I had yet to set up my dust collection system. I was tired of my cheap plastic blast gates, and I want to eventually automate my whole dust collection system. Therefore, this was a fine time to design and build my own blast gates!
I used ¾” and ¼” MDF for this, since the surface texture is so smooth and MDF tends to be flatter than plywood. Both of these attributes are important for a good seal around the gate.
I didn’t really show installing all of the piping/ducting since it was a lot of boring head scratching, cursing and redoing things over and over again, hence why it took so long to produce this video (also it’s a busy time of year for everyone, including me).
I didn’t really go into any depth for the automation aspect in this video, but I hope to be releasing that one soon with a bunch of information regarding signals, controls, programming and logic controllers.
Follow me on insta: / scottydwalsh
All music by Corbyn Kites: / @corbynkites8006
blast gates for pvc pipe
US & CANADIAN AFFILIATE LINKS:
DOWELMAX:
DOWELMAX 3/8" Kit:
www.dowelmax.com/product/clas...
DOWELMAX 1/2" Expansion:
www.dowelmax.com/product/dowe...
BLADES:
Table Saw Blade: lddy.no/1gj1k
Miter Saw Blade: lddy.no/1i8tz
Dado Stack: lddy.no/1g6ux
TOOLS:
Chisels: lddy.no/1g68v
Miter Gauge: geni.us/0K4H36
Dust Extractor: geni.us/ccOkLC
Drill and Driver: geni.us/qyrTiC
Circular Saw: geni.us/J5mDQ
Random Orbit Sander: geni.us/dkULx8s
Jig Saw: geni.us/i7HRN
Compact Router: geni.us/h90weiY
Cordless Router: geni.us/Jou0
Miter Saw: geni.us/uhfOe
Track Saw: geni.us/aslB
BITS:
Forstner Bits: geni.us/oj2HXU
Countersink With Stop: geni.us/cQFDp
Countersink w/o Stop: geni.us/dMiEM
Countersink Zero Flute: geni.us/fVIhcp
Self-Centering Bits: geni.us/RXZv9K3
3/32" Round Over Bit: geni.us/b8sGMT
SUPPLIES
Sandpaper: lddy.no/1hs32
Double-Sided Tape: geni.us/ZohrzD
Green Tape: geni.us/CWZquR
Glue: geni.us/4JCcR
CA Glue: geni.us/mELd05A
CA Accelerator: geni.us/bq0Az2
Silicone Glue Brush: geni.us/tiJw
INSTAGRAM:
/ scottydwalsh
MUSIC:
Epidemic Sound
Use my referral link and start your free 30-day trial:
www.epidemicsound.com/referra...

Пікірлер: 40

@danmarkdiza1826 3 жыл бұрын

Cinematography improves every video. Good job Scott!

@ScottWalshWoodworking 3 жыл бұрын

Thanks for watching Dan! It's nice to pickup a camera again after so many years!

@Critter145 2 жыл бұрын

“Every work of design is also a work of Art” -Me; Just Now.

@alvincanbeawsome 3 жыл бұрын

Great Video! Good for you making it yourself. Happy Holidays!

@ScottWalshWoodworking 3 жыл бұрын

Thanks Alvin! Happy holidays!

@frankpratt529 3 жыл бұрын

Nicely done video. Your's are among the better woodworking videos & I do hope you keep putting them out. Thanks for posting.

@ScottWalshWoodworking 3 жыл бұрын

Thanks so much Frank! That's a really nice thing to say! I'm enjoying making videos thus far, so I'll continue making them as long as it stays fun. Unfortunately I don't have the shop time to make them as frequently as other KZfaqrs, but I do what I can.

@rorybrown4987 3 жыл бұрын

Great video!

@ScottWalshWoodworking 3 жыл бұрын

Thanks for watching Rory!

@felixreali7101 3 жыл бұрын

great content, great delivery, nicely explained with handy on-screen visuals for the parts you're building. keep 'em coming :-)

@ScottWalshWoodworking 3 жыл бұрын

Thanks so much for the encouragement!

@mp180170 3 жыл бұрын

Can’t wait to see what type of motors you used 👌🏼

@ScottWalshWoodworking 3 жыл бұрын

Thanks for watching Mark! I'm most likely going to be using high torque servo motors. Smaller servo motors may work as well, but I'd rather use something with more power so I don't run into any potential issues.

@befmx31 3 жыл бұрын

@@ScottWalshWoodworking Are you planning on a video showing the application of the servo motors?

@ScottWalshWoodworking 3 жыл бұрын

@@befmx31 yep! I can't guarantee when it'll be out, perhaps sometime this year 🤷‍♂️? Thanks for watching!

@rachelsalsberg5011 3 жыл бұрын

A+ cinematography! The added visuals are also super helpful. Great job!!

@ScottWalshWoodworking 3 жыл бұрын

Thank YOU!

@glenmcarroll 8 ай бұрын

Looking good. Where are the electric motors?

@mcremona 3 жыл бұрын

Those handtool skills tho

@ScottWalshWoodworking 3 жыл бұрын

I always aim to impress

@rhettdunn8788 3 жыл бұрын

I wouldn’t normally subscribe with so few videos out, but I can see you’re gonna grow this fast. Great video. Keep up the good work. And thanks for inspiration for my own blast gate dilemma I was having. Won’t be the same design but the concept inspired the solution.

@ScottWalshWoodworking 3 жыл бұрын

Thanks so much Rhett! That means a lot. I've had a busy January, but I should have some new content coming soon!

@BlakePizzey 3 жыл бұрын

Do you have actuators on the blast gates yet?? Curious how that went.

@ScottWalshWoodworking 3 жыл бұрын

Not yet, the video is in the pipeline, but I have a few more things to get done first. I don't think it'll be too much longer... I hope not. I'm inherently lazy and I sometimes don't take the time to switch on the DC. I really need this lol

@brianjordison2910 Жыл бұрын

Good Morning Scott. Thank you for such great work. I downloaded you PDF on the blast gate design and it did not open. I can not find where I downloaded it from........Can you please direct me to that download?

@ScottWalshWoodworking Жыл бұрын

Hi Brian, send me an email to scottwalshmedia@gmail.com and i'll send it to you

@terryreed1421 Жыл бұрын

I can't believe that you were cutting and routing mdf AND NOT WEARING A MASK! Other than that it was a very good video.

@skicr8zguy 2 жыл бұрын

Great idea for simple automated blast gate design. Rotating instead of sliding gates makes a lot of sense.

@robertsanderford2643 Жыл бұрын

Hey Scott,unable to find a set of plans for the blast gates.could you send me a copy of the drawings.very much appreciated.rob

@ScottWalshWoodworking Жыл бұрын

if you go to my 'about' section on my channel page, you can shoot me an email and I'll send them over

@davemarciniak8014 2 жыл бұрын

Great design, and you're so comfortable on camera that it's easy to focus on the project. Subscribed and looking forward to exploring your channel.

@jon_craftingo.o4686 2 жыл бұрын

What happened to the servos?

@ScottWalshWoodworking 2 жыл бұрын

Check out my latest video and see!

@Wordsnwood 3 жыл бұрын

Are you standing on a stepstool at @10:50 or did you just make yourself a head-banging hazard? But then seeing you work at @4:34 maybe you're just used to that? Hmmm

@ScottWalshWoodworking 3 жыл бұрын

I'm a little tall, and my basement shop has generally low ceilings and bulkheads. I think I'm also sitting on my bench @10:50, but I don't think it'll be a problem. I could use a good hit in the head every once in a while.

@cackleberryfarm4598 Жыл бұрын

Where's the motor?

@alvestermilleriii8807 Жыл бұрын

DON'T PUT anyone ON BLAST... not even yourself. SERIOUSLY. (HIP HOP & REGGAE) __ The Wild Greenberry ArtHouse TWGA 🤠💯🦈

@robertsanderford2643 11 ай бұрын

YOU KNOW AT FIRST I LIKED THE DUST SHOOT SYSTEM.BUT THEN I GOT TO BUILDING IT.NOTHING WORKS OUT CORRECT,EVEN AFTER A FEW SDJUSTMENTS,NOTHING WENT AS THIS PERSON SAYS.TOTALY ABANDED THIS FOOLS SYSTEM, FOR SOMETHING THAT I KNOW THAT WORKS. BUT I CAN ONLY SAY I HOPE THAT HIS CHANNEL DOESN’T MAKE THE CUT.