Blasting Cabinet Upgrades/Tips/Enhancement

Рет қаралды 1,031

2 ай бұрын

This video is about the various upgrades that I have done to my blast cabinet. I typically use glass beads for my blasting. The recent addition of the adjustable arm will certainly make using the cabinet more efficient and enjoyable.
#blast
#blasting
#blasting cabinet
#glass beader
#sand blasting
#media blasting
#modifications
#blasting tips
#sandblast
#sandblaster
#blast cabinet modifications

Пікірлер: 25

@joepie221 2 ай бұрын

You Sly dog. I like that. The LED's and saranwrap were just icing on the cake. Stay well my friend.

@outsidescrewball 2 ай бұрын

thank you for viewing and your supportive comments....

@marksingleton2739 2 ай бұрын

That holder is a BRILLIANT idea.

@carlwhite8225 2 ай бұрын

Chuck, that is an awesome idea,i wonder if my wife will miss her monitor stand, stay tuned. Thanks.

@trollforge 2 ай бұрын

Chuck that monitor stand is absolutely genius!

@donteeple6124 2 ай бұрын

Nice idea with the adjustable arm.....gonna try it.....way to go Chuck !!!!!

@Curtislow2 2 ай бұрын

THANKS FOR SHARING, because SHARING IS CARING!

@MattysWorkshop 2 ай бұрын

Brilliant idea Chuck

@AmateurRedneckWorkshop 2 ай бұрын

Way to go Chuck always thinking. Thanks for the video keep on keeping on.

@skiptracer8703 2 ай бұрын

Pretty nifty Chuck, thanks for posting it. -jim

@jerekirkpatrick2092 2 ай бұрын

Casters and monitor stand are going on the to do list. Should be able to get to it around 2026.

@kimber1958 2 ай бұрын

Great job Chuck

@TheAyrCaveShop 2 ай бұрын

Now I have to look for monitor arms a the junk yard

@TheWrate 2 ай бұрын

Super smart idea!

@jiminsequim3218 2 ай бұрын

Very nice!

@HolzMichel 2 ай бұрын

now there's some mods that have hand and foot so to speak! thanks chuck!

@manualman6252 2 ай бұрын

Nice !!

@ronsreadyornotshop 2 ай бұрын

l like it!

@dimtt2 2 ай бұрын

Did you have a big problem with the media sticking to the walls of the hopper that you needed the vibratory motor? In my chamber which I made myself (not one of my better projects), the hopper has walls with an angle probably half as steep as yours (35-45 degrees from horizontal)and it's a big problem with the glass beads I use. A bad decision on my behalf in the design stage. But I've thought that by going a little steeper would solve the problem. What media do you use? What's your wall angles on each side from horizontal?

@outsidescrewball 2 ай бұрын

always seemed to have an issue with getting the media to move when the media has been inside the unit for a period of time, happy with the vibrator addition. The media is glass and I don't remember the spec, but it is not super argressive