Just a quick running of the motor before it's installed. Facebook = / scott.robinson.984 Instagram = / 1320motorworks
Пікірлер: 74
@ebbonemint5 жыл бұрын
Whole lotta faith in that engine stand.
@1320MotorWorks5 жыл бұрын
It was hooked to a cherry picker too lol. Not that much faith! Hahaha
@ebbonemint5 жыл бұрын
So, If you don’t mind. May I ask what engine is that? And is it on alcohol, Meth, Or just regular fuel?
@1320MotorWorks5 жыл бұрын
at this time it was on gas. Its a 468 bbc. This motor is in my 68 camaro now. 6-71 blower and carb came off and a 14-71 with a hat went on. Its now on meth. Look at my newest videos on here. Thats the same motor.
@jamesunderdal89763 жыл бұрын
American muscle badassery at its finest.
@mikeriley85463 жыл бұрын
beautiful!!!! beautiful!!! beautiful!!!!!
@1320MotorWorks3 жыл бұрын
Thank you!!
@Dabears21123 жыл бұрын
Omg.... I was introduced to you, after your passing (RIP) by my manager at work. What a great sounding, and most of all, work of love!!! Cannot wait to experience the finnal outcome of this magnificent engine ❤️
@1320MotorWorks3 жыл бұрын
Are you meaning my dad eddie robinson?
@Dabears21123 жыл бұрын
@@1320MotorWorks absolutely!!!!
@1320MotorWorks3 жыл бұрын
@@Dabears2112 check out my last few videos. It’s that engine in my Camaro with a couple of differ parts. 👍🏼
@Dabears21123 жыл бұрын
@@1320MotorWorks I'm all over it and subscribed brother👍
@markmearns89423 жыл бұрын
I'll cut a hole in my hood for that beast. Nice engine.
@1320MotorWorks3 жыл бұрын
It was totally worth cutting a hole LOL.
@mikegregory31573 жыл бұрын
nice motor
@BUCKSTALKER1236 ай бұрын
Grandpa has some balls
@dexterjsullen7 жыл бұрын
hey you got the water hose keeping it cool
@SS454LS64 жыл бұрын
Engine stand and a cherry picker with a garden hose feeding the water. lol. Sounds great.
@1320MotorWorks4 жыл бұрын
worked like a charm haha
@craigpennington125110 ай бұрын
Same old tune-the blower surge blues. How many gallons to the mile? Me & my dad built a 327 to nascar specs. It got 1.5 miles per gallon on 110 octane-leaded fuel. But wow, what a monster. It went into a 68 RS Camaro with a 4 speed & 3:36:1 rear. Those were the days when your $ had more buying power.
@mikemeyer30743 жыл бұрын
I now have a woody
@bobbygregory75066 ай бұрын
SWEET!!💯🏁💯🏁💯👍
@Defcon6663 жыл бұрын
I need that in my 99 yukon so I can make my deliveries ! That would be great
@1320MotorWorks3 жыл бұрын
That would be cool! just remember, you'll have less room as you'll need to carry WAY more fuel lol!
@Defcon6663 жыл бұрын
@@1320MotorWorks most of my profit would probably go in the tank. But it would be worth it.
@codywatts76252 жыл бұрын
🎧🤘
@ericthompson355113 күн бұрын
That’s at least 700 pounds and a ton of torque relying on that stand to hold up.
@1320MotorWorksКүн бұрын
It’s also connected to a cherry picker...🤷♂️🤣
@Steven-lz5nb3 жыл бұрын
Motor stand said please not again...
@larrybettencourt56413 жыл бұрын
Wicked sounding engine.looks beautiful. I wish I could buy it from you.or you could build me a I duplicate engine
@1320MotorWorks3 жыл бұрын
Let me know. I build them all the time👍🏼
@wadebrewer72127 жыл бұрын
how much are you over.driving blower?! this is PERFECT.
@1320MotorWorks5 жыл бұрын
13% over
@56CrazyCruiserCaddy8 ай бұрын
I have a 500ci Cadillac, than I wouldn't mind upgrading, it's for a 56 2d ht Cadillac, which has air ride from RideTech. The car is heavy, but want to go on a holiday with it, so what would be a good range of HP/trq to be driveable
@mikegregory31573 жыл бұрын
is that a solid roller
@1320MotorWorks3 жыл бұрын
Yes sir
@boomyashocka74003 жыл бұрын
How much to build my 454 like this? And where are you located?
@1320MotorWorks3 жыл бұрын
there are so many differ factors that come to play. I've got one bone stock 454 with an 8-71 very little boost all the way up to my camaro fully built engine with a 14-71. you're spending 4k just on the blower "kit" and the engine will be depending on how hard you want to push it and how reliable it will be. I'm in southern California .
@coreyellisart68779 ай бұрын
Trying to figure out what's making it hunt
@1320MotorWorks9 ай бұрын
Going lean to rich is what makes them surge (hunt).
@coreyellisart68779 ай бұрын
@@1320MotorWorks so going lean to Rich is affecting the vacuum and loading up the engine until it reaches high idle and then drops back down is that correct
@treetoppa8388Ай бұрын
Music!
@reesehooperr89066 жыл бұрын
How big is the blower
@1320MotorWorks5 жыл бұрын
6-71
@mikegregory31573 жыл бұрын
how much compression you running
@1320MotorWorks3 жыл бұрын
This was at 8.5 to 1. It’s at 10.2 to 1 now.
@PauloBelAirV86 жыл бұрын
How much psi boost do you use on the blower ?
@1320MotorWorks5 жыл бұрын
6psi at that time
@jameslahee98743 жыл бұрын
Awesome is it for sale please let me know thank you
@1320MotorWorks3 жыл бұрын
No it’s not, but can build you the same setup.
@feboogi3 жыл бұрын
I'm back ...again....this video needs a viewer rehab program .
@1320MotorWorks3 жыл бұрын
🤣 never gets old for me either!
@larrybettencourt56413 жыл бұрын
I want your motor please 🙏🏻🙏🏻
@austinjohnson57817 жыл бұрын
what camshaft ?
@1320MotorWorks7 жыл бұрын
Austin Johnson 255 262@.050 dur 650 lift on a 114. 👍
@PauloBelAirV87 жыл бұрын
which camshaft manufacturer ? do you have his part number ? I want to buy an equal, very beautiful sound your motor. thanks for your help.
@1320MotorWorks5 жыл бұрын
11-694-8 comp cams solid rooler
@mikegregory31573 жыл бұрын
what side carburetors
@1320MotorWorks3 жыл бұрын
At this time it was 2 850dp
@luke736__63 жыл бұрын
How big is it
@1320MotorWorks3 жыл бұрын
this was when it was a 468ci
@haddockracing3 жыл бұрын
What kind of headers?
@1320MotorWorks3 жыл бұрын
Those were Doug thorley.
@haddockracing3 жыл бұрын
@@1320MotorWorks thanks
@brekkharris2246 Жыл бұрын
Cam specs¿
@1320MotorWorks Жыл бұрын
This was a 260/266@.050 duration, .650 lift on a 114 lobe sep. solid roller.