Gelli Plate Transfers With Your Own Photos! 🎨 ❤

Рет қаралды 116,565

BlueLavaArt - Jessica Russo Scherr | Artist

8 ай бұрын

Master Gelli Plate Printmaking: Basic to Advanced Techniques - Art Demos & Tutorials
Struggling with your laser prints: • Gel Plate Troubles? | ...
✨🎨Looking for the supplies I use?🎨
I have it in my Amazon Storefront: shorturl.at/bqDNV
✦Shop Jessica's Art, Prints and Originals: www.saatchiart.com/russoscherr
Sales of my art through Saatchi, include shipping and Saatchi's Commission. I earn a small commission off of art supplies purchased from my Amazon Storefront. These are all art supplies she uses and highly recommends.
⬇️ Supply List Below ⬇️
Video Description:
Welcome to an immersive 30-minute tutorial on creating captivating (and sometimes frustrating) art with Gelli plates image transfer monotypes with laser prints! Whether you're a beginner or seasoned artist, this video has something for you. Learn about essential supplies, laser print recommendations, photo editing tips, and all the insider tricks I've gathered over the years. Join me on this creative journey!
🎨 ❤ SUBSCRIBE if you're new to my channel & turn your notifications on so you never miss any new video KZfaq Subscribe kzfaq.info?s...
* Apply Acrylic Paint: Squeeze a bit of acrylic paint onto the Gelli plate and use a brayer to create a smooth, thin layer.
* Place Your Image: Lay your laser print photograph face-down on the painted plate, pressing gently for solid contact.
* Transfer the Image: Rub the back of the photo with a brayer or fingertips, ensuring even pressure for a flawless image transfer.
* Peel and Reveal: Lift your photograph carefully to unveil the transferred image on the Gelli plate.
* Reverse Painting: Apply one or more layers of acrylic paint, allowing each to dry between applications.
* Transfer Layer: Evenly apply acrylic paint or gel medium to the plate with a brayer. Cover with Bristol Board paper, weigh it down with books, and let it dry for 20-30 minutes. 📸✨
👍Thumbs up for more art videos!
Special Thanks to these Artists and many more!!!
Khabraal: www.tiktok.com/@khabraal?lang=en
Junky.Kid www.tiktok.com/@junky.kid?lan...
‪@Ceramink‬ / uc2vrrq6f-q6oi8sidxeapxg
Amber / princessmeatloaf
Wesley Joseph www.tiktok.com/@wezzocreates?...
Learn art techniques with tips and tricks to make the process go smoothly and easily.
More lessons are found below:
Jessica Russo Scherr- Fine Artist @bluelavaart
• STAY CONNECTED •
✦🎨My Website: www.bluelavaart.com/
✦ 📩Contact: bluelavaart.com/contact
✦🐦 My Twitter: / bluelavaart
✦ 📸My Instagram: @bluelavaart / bluelavaart
✦🎨 Tik Tok: @bluelavaart / bluelavaart
✦🎨Buy my art: www.saatchiart.com/russoscherr
✨🎨Looking for the supplies I use?🎨
Check out my Amazon Storefront👇👇
US Amazon: shorturl.at/bqDNV
German Amazon: amzn.to/4bpgISu
Gelli Plate Supplies | These are the materials that I use (after lots of experimentation)
🌟Gelli Brand plate @gelliarts
🌟Amsterdam, Liquitex and Golden Paints (in that order of how much I use them)
🌟Brayer (rollie thing)
🌟Bristol 205 gr
🌟Baby Oil
🌟Laser Print
🚀 Optional Supplies 🚀
🌟Plexiglas for storage and to see underneath while reverse painting
🌟Gel Medium for thinning acrylic paint and for transfer layers
🌟Paint Brushes and Palette Knives
Have fun and experiment 💃
I bought my supplies @boesner_deutschland @boesner_frankfurt
If you have any questions, feel free to comment down below!
Thank you so much for watching, have a wonderful day and I will see you soon!
Gelli plate
#gelliplate
#geliplateprinting
#imagetransfer
#monotype
#Printmaking
Art Demos on KZfaq
Art Tutorials,Art Lessons,Visual Arts Education,International Baccalaureate Art,Adult Art Learning,Acrylic Painting Techniques,Art Supplies Guide,Step-by-Step Art,gelli printing,gelli plate printing techniques,gelli plate printing for beginners,gelli printing tutorials,gelli plate magazine transfer,gel plate print,gel plate printing techniques,gel plate for beginners,gel plate image transfer,printmaking,monotype,art teacher
art process,art recovery,portrait painting,mixed media,self-portrait,monochrome,Waffle House bathroom,art inspiration,art is growth,art is life,art tutorial,art lesson,art therapy,creative process,art techniques,art transformation,art evolution,art journey,art mindset,art motivation,art healing,art experimentation,art exploration,art education,art training,art mastery,art progress,art success,art failure,art mistakes,art improvement
Shorts, art supplies, paint, art teacher, art education, ib art, fine artist,
artist, speed painting, oil painting, how to, make art, Painting techniques, viral art, painter, instant, art lessons, art demo, how to paint, art ideas, professional artist, make art every day, painting, glazing, old holland, Germany,
Italy, Florence

Пікірлер: 321

@roysfoto 3 ай бұрын

May I just mention that you are by far one of the few who present your tutorials so honestly, using materials, understandable without lengthy chatter, but straight forward. We thank you very much and wish you a happy and peaceful life.

@bluelavaart 3 ай бұрын

That is so kind of you to say. I can probably attribute it to the fact that I teach middle - High School Art. Thank you for your kind comment and I also wish you a happy and peaceful life

@DCW39 8 ай бұрын

What have you started? Stumbled upon this video and now the gel plate is on order… this is a rabbit hole I’m looking forward to exploring!

@bluelavaart 8 ай бұрын

How exciting! Enjoy the rabbit hole

@jcarson7574 5 ай бұрын

I just found out about this process today and have been watching videos for hours. I cant wait to get into it myself!

@jcarson7574 5 ай бұрын

Have you tried yet? So tonight was my first attempt at anything, total newbie, tried to do an image transfer with no luck.😢Can’t figure out why unless my paint is drying too quick on the plate? Using Amsterdam Standard acrylic.😢😢Or my laser print isn’t good? Guess I’ll keep trying. She makes it look so easy!

@suzijorgensen6545 5 ай бұрын

😂😂😂

@Bigheartrolling 4 ай бұрын

Hahaha. Same here!

@tomgilbertson5236 7 ай бұрын

This is an excellent lesson! I’m a former (many years!) art instructor….. I’m envious! Seriously, this video is very well organized and presented. So much information and no useless wandering around. If there are awards given for instructional videos you should get an Oscar. Now….my 16 x 20” Gelli should be here this pm…….can’t wait…..

@bluelavaart 7 ай бұрын

Wow! What a comment. I am so happy that you found my video. I’m a bit jealous of the 16x20 inch plate. I’m hoping to get one soon 🫶 ❤️🫶❤️🫶

@susanfernandes7748 5 ай бұрын

I have a Brother colour laser. I set the printer driver to THICKER paper even though I'm using a 32lb copier paper. The THICKER paper setting causes the paper to move more slowly through the process. You get more toner deposited and you get a longer fuse time. I very rarely have image transfer failures with even the finest lines on an image. Love the addition of painting the on the gel plate itself -- stunning results and a very well constructed video -- thank you!

@bluelavaart 5 ай бұрын

Excellent tips and suggestions. Thank you!!!

@shannonburns2289 3 ай бұрын

Does the "thicker paper" option appear in the print window?

@bluelavaart 3 ай бұрын

@@shannonburns2289 I can set mine on my computer in the pop up box for different types of printer paper but it might vary by printer

@susanfernandes7748 3 ай бұрын

@@shannonburns2289 Yes, the setting is under Preferences. Every printer driver is different as is every printer. Most Brother LASER printers will have the same setup. Inkjet printers are a different beast. An inkjet printer is not able to print on really thick paper so they may not have the option. You would set it to the thickest paper option you have and print on normal copier type paper.

@veerlewitdouck9831 2 ай бұрын

Hello, how do you double print? Put the print back in the paper carrier? Thanks!

@creativebeanart 8 ай бұрын

I use packing tape to lift little bits of paint. Works a treat.❤

@bluelavaart 8 ай бұрын

I am going to try that

@bertschlutzenheimer7095 8 ай бұрын

This is awesome! Thank you SO much for your precise, detailed and so very warm way to explain your whole process! Thank you 💚

@bluelavaart 8 ай бұрын

I am so happy! Thanks for sharing your feedback

@paulfoote7869 7 ай бұрын

This is one of the better videos on how to do gel plate image transfers and Jessica's prints are beautiful. If you are going to paint your print on the plate like Jessica does in this video, you will need to let each layer dry before you add the next layer.

@bluelavaart 7 ай бұрын

Oh thank you! How thoughtful of you!

@RackCrossStudio 12 күн бұрын

Just got my first gelli plate and looking forward to get into using it - THANKS 🙏for the How-to vids 👍🏻

@bluelavaart 11 күн бұрын

YAY!!! That is great to hear. Have fun

@mendyhand3895 5 ай бұрын

Dang girl! Thank you SO much! Going to watch this multiple times! ❤️🙏🏻👍🖌🎨

@bluelavaart 5 ай бұрын

YAY!!! Happy you find it helpful

@Julietavolcano 8 ай бұрын

This looks like my type of art!!

@br0600 5 ай бұрын

Amazing training video, thank you very much!

@bluelavaart 5 ай бұрын

You're very welcome!

@joujouprochaska7681 14 күн бұрын

Love love love your work I’m so inspired

@bluelavaart 14 күн бұрын

I am so thrilled!

@p8ulr3id 8 ай бұрын

Brilliant! Thank you Jessica, a great explanation of your process

@bluelavaart 8 ай бұрын

You are so welcome!

@kittycat1302 4 ай бұрын

Wow! I love ❤️ this technique! Plan to try it as soon as I get a chance! Thank you !

@bluelavaart 4 ай бұрын

Wonderful!

@TrixieStardust73 3 ай бұрын

This is amazing! Thank you so much for the great tutorial! I can't wait to try this. I had never heard of this type of printing before and love how accessible it is with a minimal amount of supplies. So excited!

@bluelavaart 3 ай бұрын

You are so welcome!

@shirleykamala1797 5 ай бұрын

lovely!!!

@heidiholycross-lui7340 5 ай бұрын

This is such a great video! Thank you for sharing your process for how you created these images, especially the printing tips at the end. Plus it was a delight to see your artwork too!

@bluelavaart 5 ай бұрын

Thank you so much! Greatly appreciate 💝

@blue.orchid.coaching 4 ай бұрын

Amazing content! Thanks so much for the lessons!

@bluelavaart 4 ай бұрын

My pleasure ☀️♥️🎨

@user-db4sq4dm7d 4 ай бұрын

Thank you so much for this video!

@bluelavaart 4 ай бұрын

Glad it was helpful!

@user-nw2mj9rc2k 4 ай бұрын

His was a fantastic video and very informative. Can’t wait to start. Thanks ❤

@bluelavaart 3 ай бұрын

You are so welcome! 🤗

@eveking6356 Күн бұрын

Thank you for sharing! I want to dabble in this to see how it turns out

@waseemashraf3965 21 күн бұрын

Really helpful for artists thanx ❤🎉

@bluelavaart 21 күн бұрын

Glad to hear that! :)

@juliannaboldt7152 19 күн бұрын

This is one of the best tutorial videos I’ve seen on gelli printing. Thanks so much!

@bluelavaart 18 күн бұрын

Oh my goodness thank you so very much. I really appreciate that.

@juliebooton1360 4 ай бұрын

Excellent tutorial. I love your explanations and your work. My mind was racing with all the possibilities. Gifts I could make for my children and grandchildren of the family home, places visited and loved by us all. Thank you.

@bluelavaart 4 ай бұрын

Thank you so much! It is a great way to reimagine your photos. Have fun!!!

@beverlyhayshouston2770 6 ай бұрын

The print with the arched window is my favorite!

@bluelavaart 6 ай бұрын

That is one of my favorites too

@jhonmoody518 Ай бұрын

Thank you , been looking for a video with all this info.

@bluelavaart Ай бұрын

Glad I could help

@AdolfitoKatastrophen 8 ай бұрын

Amazing thank you! This is super helpful!

@bluelavaart 8 ай бұрын

Glad you found it helpful!!!

@karenmason5218 8 ай бұрын

This is the BEST tutorial I have seen!!! Thank you!

@bluelavaart 8 ай бұрын

Wow, thank you! 😊

@LindaAKeller 6 ай бұрын

Have never used photo transfers before. Am definitely intrigued. Thank you so much.

@bluelavaart 6 ай бұрын

You are so welcome! 🤗

@Creativeassemblages 7 ай бұрын

Thank you. The best tutorial I have seen on Gelli Printing.

@bluelavaart 7 ай бұрын

That is so great to hear. I am happy you found it helpful

@DayByeDayChristine 8 ай бұрын

Thank you for sharing your knowledge about this fascinating art of transferring images and printmaking.

@bluelavaart 8 ай бұрын

You are so welcome

@coletteclegg1519 2 ай бұрын

Excellent. Thanks a million.

@bluelavaart 2 ай бұрын

My pleasure ♥️

@princesspandora8671 8 ай бұрын

looks so fun!! thanks for sharing

@bluelavaart 8 ай бұрын

Thanks for watching!

@reneewikaire5478 7 ай бұрын

✨ brilliant TY

@fruitlessbeast 7 ай бұрын

So much here! Many things to try now. Thanks for taking the time to share!

@bluelavaart 7 ай бұрын

You are so welcome! 🤗

@shannonburns2289 3 ай бұрын

I have been honing my transfer skills for over a year now, and still this tutorial provided new information. I have yet to try the "painterly effect", and will undoubtedly return to this video as it focuses on that particular method of treating a transfer. The info comes at the viewer at a good clip, so I'll be re-watching with pen and paper at the ready.

@bluelavaart 3 ай бұрын

Yay! So happy to hear this Shannon

@bardoteachings 7 ай бұрын

I felt a true creative spark from your wonderful video. Thank you!!!

@bluelavaart 7 ай бұрын

Wow, thank you 😊

@dominiquegorgeron2463 18 күн бұрын

Bravo et merci pour toutes ces explications très intéressantes.Joli travail.

@bluelavaart 17 күн бұрын

Merci 💃🎉🌼🌷

@frankfolino3118 2 ай бұрын

What great insights!!!!

@bluelavaart 2 ай бұрын

Thanks!

@carolratcliff 7 ай бұрын

I simply love your work!! You have really transformed the art of jelly printing into a fine art, especially with the added painting of your plates! And I also love the experimental-ness and fun of finding a style I need to find a style and I love the experimentation you do. Thank you for all of the, wonderful tips and tricks.

@carolratcliff 7 ай бұрын

And I meant to say anyone can print with a gelli print, but it takes an artist to find a real true work of art!❤

@bluelavaart 7 ай бұрын

I am totally blown away by your comment. Thanks for your supportive and kind words! You have made my day ❤️❤️❤️❤️

@Scrapart_by_Zelinda 8 ай бұрын

Your video was the best I have watched. Some don’t explain you have to let the paint dry. Thank you. And I loved how you had color with a paint brush.

@bluelavaart 8 ай бұрын

Always happy to help! Thank you so much. You made my day

@annelise8014 7 ай бұрын

Wow, what generous instruction - thank you from Mexico!

@bluelavaart 7 ай бұрын

Thanks for watching! ❤️❤️❤️❤️

@221b-Maker-Street 7 ай бұрын

Wow! These images are just fabulous, and _just_ the kind of thing I'd love to create with a gelli plate - thank you, Jessica!

@bluelavaart 7 ай бұрын

Thanks so much. I’m going to work on some more tutorials. Let me know what you still want to learn about ❤️❤️❤️

@221b-Maker-Street 7 ай бұрын

@@bluelavaart Thank you! I shall put my thinking cap on as I definitely want to learn more. Thanks once again for sharing your gifts with us, Jessica. 🤍

@krudler406 7 ай бұрын

this was great, thank you so much for sharing!

@bluelavaart 7 ай бұрын

You are so welcome!

@ThomasWheelers Ай бұрын

You are a wonderful teacher. You really helped us. The heat wave means we are home with ac running and can challenge ourselves. Than you.

@bluelavaart Ай бұрын

So happy to hear!!!

@maryjokattelman3321 6 ай бұрын

Thank you so much for taking the time to share. I have learned a lot.

@bluelavaart 6 ай бұрын

Glad it was helpful! ❤️🤩❤️🤩

@bootseycloverdale7371 8 ай бұрын

Excellant information. I can't wait to try this!

@bluelavaart 8 ай бұрын

Have fun!

@jlcum453 5 ай бұрын

Thank you for showing how to use your own photographs, which is why I wanted to learn gel printing. I wasn’t have any success transferring magazine images let alone mine . Just purchased a laser printer, hope this works.

@bluelavaart 5 ай бұрын

Glad it was helpful! It is a tricky process and takes some small tweaks to get it right. Have fun

@artsydancequeen2964 5 ай бұрын

Thank you for an excellent tutorial. Now I need to get a laser printer!

@bluelavaart 5 ай бұрын

Glad it was helpful! ♥️

@us7579 5 ай бұрын

Great video thank you ❤

@bluelavaart 5 ай бұрын

You are so welcome!

@awankstain 2 ай бұрын

Great video thanks!

@bluelavaart 2 ай бұрын

Glad you liked it! ♥️

@bluelavaart 8 ай бұрын

Special Thanks to these Artists and many more!!! They have helped me so much in understanding how to do this process. Give them a follow. Khabraal: www.tiktok.com/@khabraal?lang=en Junky.Kid www.tiktok.com/@junky.kid?lan... @Ceramink www.tiktok.com/@UC2VRRQ6F-q6o... Amber www.tiktok.com/@princessmeatloaf Wesley Joseph www.tiktok.com/@wezzocreates?...

@heloneidaheloneida 6 ай бұрын

You are a true artist and an inspiration for our work, thank you

@bluelavaart 6 ай бұрын

Wow, thank you! Greatly appreciated

@tracksuitgod 5 ай бұрын

This is the most detailed tutorial and most helpful gelli plate printing video I have found. Thank you for being so precise and reassuring that all my mistakes aren't solely my fault 😅

@bluelavaart 5 ай бұрын

Glad it was helpful! and the mistake are totally not your fault. It is a delicate process with lots of variables

@viviannedelavega605 3 ай бұрын

Thank you for a brilliant presentation and a wealth of information!

@bluelavaart 3 ай бұрын

Greatly appreciated!!!

@viviannedelavega605 3 ай бұрын

Certainly, you’re very welcome. What is your favorite way to clean your gelli plate?thank you…

@bluelavaart 3 ай бұрын

@@viviannedelavega605 Using baby oil for the stuborn crusty bits.

@sarnxero2628 8 ай бұрын

This is really cool. I am going to give this a try.

@bluelavaart 8 ай бұрын

Go for it!

@trdewey 7 ай бұрын

Loved this video! Sometimes if you have an area that is sticking and peeling, you can add some matte medium and put your paper back down. Wait a bit, then see if you can salvage the area. Of course painting over it or collage works too! I love using my own photos in this transfer process!

@bluelavaart 7 ай бұрын

Thanks so much! That is a great tip. that little bit extra of medium could really help

@trdewey 7 ай бұрын

@@bluelavaart it doesn’t always work, but sometimes the gelli -plate gods come through. I love how you paint over the background to create a very painterly work.

@bluelavaart 7 ай бұрын

Thanks so much. The plate gods are finicky

@marionlyding7935 6 ай бұрын

WOW. Thank you for the great instructions! This is a very helpful video. I am sending you greetings and sunshine from New Mexico.

@bluelavaart 6 ай бұрын

So happy you found it helpful! Greetings from Germany

@odilehelbongo5221 6 ай бұрын

Thank you so much! Love from Strasbourg France😘💝

@bluelavaart 6 ай бұрын

You are so welcome! Merci ❤️ Strasbourg

@photoking100 7 ай бұрын

Thank you so very much for this video! I have been having a lot of difficulty with doing transfers, but have made some progress after watching this. Your suggestions are working well, but I am only getting any success at all with my sketch like images, but would love to transfer some of my own photos. I have been very selective in which images I try, and they seem to be of high contrast, but do not transfer in the way your storefronts do. I would appreciate anymore suggestions. And again, thank you for helping me to make progress! I love your work.

@bluelavaart 7 ай бұрын

It might be the amount of paint on your gel plate. Is there no image appearing and all the paint sticking to the photo or is the paint remaining on the plate? It could also be the amount of pressure. I posted a short last week that might be helpful kzfaq.infovFsnONx79Fo?feature=share I sometimes get ones that I think will work great but then don't transfer. It can be frustrating

@bluelavaart 7 ай бұрын

and thank you so much for your kind words

@dreamwoodsbutterfly 7 ай бұрын

Thanks for this very informative video!

@bluelavaart 7 ай бұрын

Glad it was helpful!

@barbaracabrera207 8 ай бұрын

I'm a new subbie. Love your channel. Thx. Austin TX USA

@bluelavaart 8 ай бұрын

Welcome!! Thanks!!!! Let me know if there are any types of art videos you would like to see

@towahead 2 ай бұрын

thanks so much

@joon4yu 7 ай бұрын

Great tutorial ❤❤❤😊

@bluelavaart 7 ай бұрын

Thank you! 😊 So glad you liked it. I am working on a new one with some new tips.

@charlottebialek-cx5rz 3 ай бұрын

Thanks!

@bluelavaart 3 ай бұрын

Thank you so very much ♥️🎨♥️

@tinagreene7158 7 ай бұрын

This is a great video! Thank you. You've opened my eyes to some new techniques that I'm excited to try. One Q for now: When printing inject photos, should I print on glossy photo paper or plain paper? Appreciate you sharing your knowledge with us

@bluelavaart 7 ай бұрын

So happy that you found it helpful. - Ink jet uses ink whereas laser printers use toner. The toner works better for this but some people do it with ink jet as well . Toner has plastic in it which repels the paint and makes this process work. So use laser and I print them on regular printer paper, not glossy.

@deborahk3435 9 күн бұрын

If you go to Kmart.. they have these clear perspex type boxes with a lid. I bought one in a size bigger than my geli plate and put my geli plate on the lid. It keeps the underside pristine and you can then pick it up easily to check the other side. So cheap.

@bluelavaart 9 күн бұрын

Excellent tip! Thank you for sharing

@Blessed_by_Yeshua 6 ай бұрын

Thank you. And I honestly would have liked to have seen you do the dolphins in water in that one photo transfer. A little old style with a lot of whimsy and movement.

@bluelavaart 6 ай бұрын

Next time! perhaps! Thanks so much!

@lindalavid 7 ай бұрын

Yikes. Great job!!!!

@c.goedhart2470 6 ай бұрын

Love your tutorial! Question: What kind of White Paint Marker you use?

@bluelavaart 6 ай бұрын

It is a white gel pen 🖊️

@MJGave 8 ай бұрын

Thank you so much! I am so intrigued by this process and want to give it a go. So for the final layer you use either gel medium OR white acrylic? When would you use each method?

@bluelavaart 8 ай бұрын

I am so happy your found it helpful. I would use gel medium if I want the color of the paper to show through, or have more transparency. I use white if I want a bit more brightness and opacity for the transfer. I also use other colors and that is just based on experimenting. Good luck :)

@mjceramics5552 8 ай бұрын

! @bluelavaart That's very helpful. Thank you!

@63viet 8 ай бұрын

Thank you for your tutorial videos. Can you use acrylic gouache or gouache for gel printing? Thank you in advance for your advice.

@bluelavaart 8 ай бұрын

You are welcome! You can but I don't think they work well for image transfers. There are a lot of media that you can use on these plates though.

@valef9460 7 ай бұрын

Thank you so much for the great tutorial. Will you also experiment with photos of people? I would like to see what you do with them. Thank you! 😊

@bluelavaart 7 ай бұрын

You are welcome! I will try with people. Sounds fun

@valef9460 7 ай бұрын

@@bluelavaart thank you, looking forward to it!!

@WanderlassS 18 күн бұрын

❤❤❤free course❤❤❤

@bluelavaart 18 күн бұрын

I have even more resources on my website :)

@lisadumas7019 6 ай бұрын

What version of PS are you using? Love these videos, thanks.

@bluelavaart 6 ай бұрын

The latest version / Creative Cloud

@gillyb44 7 ай бұрын

Thank you very much excellent demo. Ive tried endlessly to use my Brother laser printer, but always have a fail, even putting it through twice. Can I ask what laser printer you use. Many others use Brother and not good results. Cheers.

@bluelavaart 7 ай бұрын

I use a Triumph Adler. It might be a problem with the resolution of your prints. Is there no image appearing and all the paint sticking to the photo or is the paint remaining on the plate?

@guizachristiane4824 2 ай бұрын

Stonepaper is the best for this kind of printing

@bluelavaart 2 ай бұрын

I use it in my journal but never thought about it for printing. Thanks for the tip

@annieoconnell4004 Ай бұрын

Your work is wonderful! Thank you so much for sharing these instruction. I’m not sure I understand one thing. When you put the paint layers down over the image, do you want the paint to be wet or dry before you put the Bristol down on top of it?

@bluelavaart 29 күн бұрын

Thanks so much. You want the paint to be wet. Then leave the bristol on it until it is fully dry.

@ginabarborek8126 22 күн бұрын

Thank you! I’ve have struggled with the image transfer ever since I attempted the transfers. Your lesson was so easy and I actually got a successful transfer! Thank you, thank you! I did have one question. What type of matte medium do you use?

@bluelavaart 22 күн бұрын

Congratulations on the transfer!!!!! I think the one that I use in the video is by a German art supply company called Boesner. However, liquitex or Golden work well for this too

@CraigsOverijse Ай бұрын

Not only do you not need those acetate to store the Gel plates but from what I understand they can damage the plate it is better to put a paper layer next the gel plate inside the box. I just cleaned mine then oiled and used then kept a sheet of copy paper each side I reuse this until it rips then get a new paper and they store well. .

@bluelavaart Ай бұрын

Be careful with paper. It even says in the gelli plate instructions to not store on paper. The paper can dry it out because the mineral oil in the plate leaches into the paper. I store my on plexi, not acetate now and it works really well. I

@stephaniemaier2964 Ай бұрын

Love your photo art & instructions. While layering your Snack Bar & Grafitti pieces, what are the fabic strips? I'm assuming to preserve the initial layer underneath?

@bluelavaart Ай бұрын

I don’t think I used any fabric strips. Maybe there was just some scrap pieces of paper around.

@bluelavaart Ай бұрын

Thank you so very much that’s greatly appreciated

@ptorpie Ай бұрын

HI Jessica, I love what you do with Gelli plate photo transfers. I have watched your video a few times and have not been able to get any kind of phot transfer to the Gelli plate. Im thinking it may be the printer Im using which is a stand office laser printer/copier. It uses toner and it will print the photo in half tone but there is no photo setting for the printer. The prints just don't transfer. I also tried by inkjet photo printer and that totally didn't work. How can I get a decent print to work with the printer or do I need to find a fancier laser printer? Thanks for any tips

@bluelavaart Ай бұрын

It is hard for me to day. The more toner on the plate the better. If you try to do a magazine transfer and that works, you can eliminate the amount of paint and quality of paint as an issue. Have you tried runing the print through the copier 2xs to add more toner?

@ingunnelverum 7 ай бұрын

Speedball plate distroyd my happyness in the beginning of my gelliplate carriere. 😢 But then I order a GELLI plate ,and at last I love to print.

@bluelavaart 7 ай бұрын

Yes, same here! I struggled so much in the beginning. I bought the speedball because I generally like the brand but in this case Gelli for the win!!!!

@thestourvalleysynthesizerc6543 6 ай бұрын

I really enjoyed this video and the results that you got. I got a 6"x6" gel press plate for Christmas and gave it its first try out today. I tried a photo print and underpainting one as I really like the look of that but results were not on par with yours. Do you wait for the underpainting to dry before you add the white acrylic and bayer that over everything and then place the paper/card over? I didn't and the white sort of blended a lot of the other colours (not all). Thanks

@bluelavaart 6 ай бұрын

Yes, make sure all of the layers are dry before working on the next. Otherwise the colors will blend and possibly start to lift off of the plate. It takes a fair amount of experimenting. I hope that helps and enjoy your new plate.

@thestourvalleysynthesizerc6543 6 ай бұрын

@@bluelavaart thank you :)

@sarahobrien9495 8 ай бұрын

Hi. Did you use Matt or gloss gel medium? Great tutorial 😀

@bluelavaart 8 ай бұрын

Satin medium 😊thank you

@arri1cook37 8 ай бұрын

Love love love!!!! Subscribed and ready to play, but I NEED A LASER PRINTER RECOMMENDATION, please 🙏. I am very determined and missing that one key ingredient.

@bluelavaart 8 ай бұрын

I’m definitely not an expert on types of printers. But I can say that the quality of your image including the resolution and contrast probably play a greater role, then the type of laser printer.

@arri1cook37 8 ай бұрын

@@bluelavaart Noted, and thank you so much.

@jacarandasprit5357 4 ай бұрын

Thank you for all the specific information. Painting sections after the image is made looks amazing. I'm really struggling. I don't have a laser printer, so I went to a local big box office supply store where they said all of their printers were laser printers. When I pull the imaged paper off of the gelli plate it picks up all of the paint...no image left behind. (like the photos you show at the beginning of your video). I used different thicknesses of paint thinking that could be the issue, but same result. I pulled a page from a magazine - not high contrast - but it did at least create an image. Do you think the prints I made at the store were not really printed with laser print toner??? Thanks!

@bluelavaart 4 ай бұрын

It could be the prints from the store. I have heard others have had similar problems. Perhaps they are printing on an eco mode that doesn’t require much toner. So frustrating.

@jacarandasprit5357 4 ай бұрын

@@bluelavaart Thanks - I just had some printed at a different copy store - we shall see what happens!

@jcarson7574 5 ай бұрын

I missed why was the gel medium used at one point? Your video is the first I've seen where you've used a brush, thats a great idea! Really great video! I'm so excited to get started! This is my first day even looking into all of this but just had a thought, have you ever tried rolling a glass over the gel plate? I'm just thinking of all the possibilities! Oh wow! The white paint marker!!! Thanks again for sharing this!

@bluelavaart 5 ай бұрын

The gel medium sometimes helps the acrylic paint from pooling when it is applied with a brush. I usually will cover the photo transfer layer with a coat before I start in with the paint brush.. I don't know if it would work with glass. Let me know if you try it out! Thanks!

@jcarson7574 5 ай бұрын

Thanks!!!

@brendabeeneshackleford9157 7 ай бұрын

Thanks so much for such a detailed explaination and demo. Laser paper. Do you have a link to your source of HP Premium. Can't seem to find the exact weight (80 gms) and brightness finish (170). Thanks so much.

@bluelavaart 7 ай бұрын

I bought mine off Amazon here in Germany. Anything kind of similar would work

@brendabeeneshackleford9157 7 ай бұрын

@@bluelavaart That explains it:) We have a 90 gm, so I'll try that! SO EXCITED!!!!

@cristinadeva6064 15 күн бұрын

it works with inkjet print too? and for example if you use the photo printed on photographic paper will it work? thank you

@bluelavaart 14 күн бұрын

Laser prints are needed. The toner has plastic bits, which repels the paint. The acrylic paint soaks into the paper that doesn’t have toner on it.. making this process work well.

@alejandroreyesloa1231 6 ай бұрын

Hi Jessica, this is an incredible tutorial to get started with transferring images. I have one question about it, in the minute 21:00 you transfer an image then add some gel medium, put some paper over it and some books, my question is, this process will not pull off the image when the paper is removed? and how long did you leave the books over until you remove them? thanks for your answer and thanks again for this wonderful and helpful tutorial! 👏

@bluelavaart 6 ай бұрын

I put the gel medium on after the black from the image transfer dried. However, you found a glitch in my video. The books and paper go on after the reverse painting. You are the first person to tell me about it. Thank you!!! I totally didn't spot that error. Anyway, I normally leave the books on for about 20 minutes then I will pull the paper when it feels dry. That could be 5 minutes or an hour. Depends on the thickness of the paint and the humidity.

@connieborg7537 6 ай бұрын

This is an awesome video. Could you please tell me what type of paper do you print on. Thanks❤

@bluelavaart 6 ай бұрын

Thanks so much. Bristol is a slightly thicker smooth and very durable paper. I have been having a lot of success with this type of paper but it is not the only paper you can use.114lb 205 grams

@connieborg7537 6 ай бұрын

Thanks for your prompt reply 👍

@63viet 8 ай бұрын

Could you advice what materials are needed (not too expensive).

@bluelavaart 8 ай бұрын

Amsterdam paint is the one I can recommend. It is mid range price. Good luck :)

@krimimimi 6 ай бұрын

great video. especially the try and error process. ive been through all the steps over and over again but nothing worked. unfortunatly home laser printers (at least newer models) dont work with the transfer technique because the toner for home laser printers is modified for homeuse. professional laser printers and giant copy machines still work with the 'old' toner technique and so very well for transfer. i wanted to get this work so bad 😢 also tried double printing but home lasers dont line very well on multiple prints.

@bluelavaart 6 ай бұрын

I know it can be really frustrating. Check to see if you are printing on an eco mode that saves on toner. Also, I am working on a detailed video about this process and some things that could help. I hope to have it posted this week. If you like, you can subscribe and turn on notifications,

@krimimimi 6 ай бұрын

@@bluelavaart i tried everything in your video. i live in germany i have access to all the tools you are using. but still no success. i tried everything form 1 to 5 layers of toner. also matt medium to get it stick. but nope. different brands of plates. still no transfer. magazine pages work perfectly fine. looking forward to the new video :)

@bluelavaart 6 ай бұрын

I posted the video. I hope this helps 🤞🤞🤞@krimimimi

@marlasinger413 2 ай бұрын

@bluelavaart how many minutes it takes to drying? Is gel plate reusable or not?

@bluelavaart 2 ай бұрын

You can reuse it endlessly! It depends on how many layers of reverse painting for the drying time Sometimes overnight

@marythomas5656 8 ай бұрын

Don't make the mistake of buying the Speedball plates which are used with printmaking inks. The processes are NOT interchangeable.

@bluelavaart 8 ай бұрын

Yes! I was so frustrated with Speedball for this process.

@scrappytraveler-cherylfran4890 7 ай бұрын

What Gelli Plate do you both recommend? Thank you.

@Poetessa2 2 ай бұрын

Can you use plane glaze as opposed to the gel medium I think it's called?

@bluelavaart 2 ай бұрын

It depends on the glaze. I don’t think it will be as effective though. Gel medium has an elasticity to it that helps appeal off of the gel plate.

@Poetessa2 2 ай бұрын

@@bluelavaart Thank you! I'll be ordering the gel medium!

@selfiopath1982 7 ай бұрын

6:40 I found that leaving paper for more than a minute results in some 30-40% of the paper stuck to the plate for good, which ruins the whole print. I use liquitex basics, Amsterdam, W&N Artist grade and a 160gsm smooth printer paper on a Gellie Arts plate. I also use Matt medium or acrylic medium (instead of gel medium as in your case). Basically I follow each of your step and your timing, but my prints gets stuck to the well-seasoned plate. Why? I’d love to hear your thought please please please 😊

@bluelavaart 7 ай бұрын

I sometimes even leave the paper on overnight! I think that last transfer layer is the key bit. Since I do a fair amount of layers before the transfer layer of paint or gel medium, I tend to do a very thick transfer layer. I am using 250 gr Bristol. That might be the issue. Good luck

@cathleenvanbergen9356 2 ай бұрын

Is double printing a laser print the only way to get best transfer to plate ? What is the best paper to print the image ? Is it best to pull image right away from plate? And is Bristol board best final paper?

@bluelavaart 2 ай бұрын

Here are my answers; Is double printing a laser print the only way to get best transfer to plate ? Yes. Some people have some luck with inkjet but it is a slightly different process. What is the best paper to print the image ? I use regular printer paper most of the time. Is it best to pull image right away from plate? During the image transfer part, yes, you want to pull it after some light pressure. And is Bristol board best final paper? That is what I prefer. I hope this helps

@MckinleyWileyDRC 6 ай бұрын

🙂This is amazing Jessica! Thank you for this. I’m sure you mentioned it already but after a few (several🥴) replays I’m still curious as to what specific kind of paint you’re using when you’re adding the colors (2nd layer). Is it just a good acrylic paint (i.e) what is used for transferring to the gelli plate?

@bluelavaart 6 ай бұрын

Wonderful! Thanks so much. Usually, I go with Amsterdam and Liquitex paints, but Golden acrylic paint every now and then

@bluelavaart 6 ай бұрын

Same as the image transfer layer