2019 Transit Connect ABS Programming TIP

No video

2019 Transit Connect ABS Programming TIP

Рет қаралды 1,928

10 ай бұрын

Here is a quick tip that may save you alot of time!
Be sure to check out courses.handso... for online automotive videos and lessons more in depth than I have on youtube.
Also check out courses.handso... for more resources and information. If you liked this content and have not already subscribed please do so now!
Equipment that I use:
TopDon Battery Maintainer amzn.to/40mubUw
Cardaq Plus 3 amzn.to/3Z9F3V1
Astro Meter amzn.to/402cIkJ
Break out box OTC amzn.to/41f0x3Z
Break out box Go Daig amzn.to/3nWCqsK
Quality Test Leads www.aeswave.co...
amzn.to/3LH5Vsc Pico 2205
Camera equipment that I use in the field
amzn.to/40jzpR2 - Sony ZV-1 Camera
amzn.to/40hchCA - Tascam Audio Recorder
Studio Camera amzn.to/3Jz7A0p
Studio switcher amzn.to/3MDU52v

Пікірлер: 11

@detailedautodiagnostics 10 ай бұрын

Hello my friend!!!!! GREAT TIP!!! I have also ran the pressure bleed procedure with no bleeders open and you will hear the valves moving and that will help warm up the module as well!!!!!

@jmdiagnostics2869 10 ай бұрын

I have used my mini torch I use for heat shrink tubing. Run it over the metal parts of the HCU for about 20 seconds. Move it around not just sitting in 1 spot. Works every time for me. I have had them in sub winter temps left out overnight and it worked.

@BrianMann216 10 ай бұрын

Good to know. This is the first one that I have seen( or maybe the 1st one that I had that was not warm enough!)

@djosbun 10 ай бұрын

Great information, Brian. Thanks for sharing! 👍🏼

@DuaneDonaldson 10 ай бұрын

10 degrees C, double to 20, subtract 10% to 18 and add the conversion of 32 to 50 degrees. SIMPLE, double C, minus 10% and add 32.

@advancedleveldiagnostics 10 ай бұрын

Great Tip, Thanks for sharing!

@carolinacespedes-uribe4545 10 ай бұрын

Thank you!

@BrianMann216 10 ай бұрын

For sure!

@farhanmax69 9 ай бұрын

Hello sir I am form Oman. I am Just buy used GMC terrain 2015.2.4L engine. When i buy have issue is electric power steering. Meassge comes in screen need steering service.when i check eps motor grip open.but vehicle start.then i insert grip vehicle not start and same like shorts whire position. Now remove again grip.then i deicide my car eps steering box motor problem.now i buy eps used. And fix this but all cables is insert in eps.now car is start but steering fault is same.need service steering. I have scanner this code come C0565-5A.plase sir you have any sulation now whats problem. If possible please give sulation.