Рет қаралды 509
Part 2 of Inpa/standard tools installation with actual how-to code tutorial.
If you are starting out with BMW diagnostics for yourself or friends and family, this should be an easy DIY tutorial on how to install and configure the INPA and how to start coding.
Link to my shared folder:
drive.google.c...
VCP drivers ftdichip.com/d...
01:34 checking pre-requesite for default coding.
03:48 Default coding and explanation.
05:40 Usual settings of IHKA after default(factory) reset.
06:27 Manually(custom) coding instructions for IHKA to show blower speed in AUTO step by step.
10:30 How to make a backup file.
12:43 Coding the module and difference it made
14:33 Emptying the .MAN file finishing with coding