BMW R100/7 1977-78 Master Cylinder Rebuild
Рет қаралды 6,044
5 жыл бұрынOverview of a master cylinder rebuild on a 1977 BMW R100/7. Rebuild kit that includes the aluminum plunger, gaskets, c-clip and large rubber boot (to cover master cylinder) was purchased from Bob's BMW:
Web store: www.bobsbmw.com
Item# 34 31 1234926 REPAIR KIT BRAKE MASTER CYLINDER
* be sure to search this under your model and year to ensure you're ordering the right one. Mine is 1977 year model.
I--------------------------------------------
If you'd like to buy me a beer or coffee:
/ zooskifilms
account.venmo.com/pay (user: chomiczewski3@gmail.com)
--------------------------------------------
#r100/7 #r100 #r100brakes
@fedeontour 4 жыл бұрын
Thank you for this video! Very helpful 👍
@zooskifilms 4 жыл бұрын
Glad it was helpful!
@hellfirehellfyre6591 Жыл бұрын
R80 master cylendar
@zooskifilms Жыл бұрын
@hellfire hellfyre - Yes, might be the same between the R80 and R100.
@nunosilva6787 4 жыл бұрын
you should have used a bit of oil to lubricate the rubber components
@zooskifilms 4 жыл бұрын
Bob Smith - good point!
@alistairtassie1614 Жыл бұрын
Oil will destroy brake rubbers, use proper rubber grease, we use Bosch Rubber grease.
@odonnelljay1420 4 жыл бұрын
Great video! Can I ask where you ordered you rebuild from?
@zooskifilms 4 жыл бұрын
Good question, I added the rebuild kit part number and website to this video's description. I bought it from Bob's BMW www.bobsbmw.com - Item# 34 31 1234926
@XavierDelcourt 4 жыл бұрын
Cylinder is too far in, need 1,2mm free play on cable on master cylinder. Also use ATE grease on the inside parts and seals against rust.
@zooskifilms 4 жыл бұрын
Xavier - are you saying the whole master cylinder is too far forward on the frame?
@XavierDelcourt 4 жыл бұрын
@@zooskifilms the cylinder in the master cylinder, the one that is pushed with small pushrod by lever and cable, should stick out of the master cylinder, 1,2mm to be measured as described in the BMW manual
@frankmummolo7727 4 жыл бұрын
No inspection of cylinder bore? Often pitted. New seal rings won’t like that!
@zooskifilms 3 жыл бұрын
Thanks for the comment. I did check it but did not show here. I'll be more thorough in future videos!
@theghostangler 3 жыл бұрын
Was going to do this and just found out that the master cylinder kit is now obsolete. :(
@zooskifilms 3 жыл бұрын
Have you tried Boxer2Valve site? www.boxer2valve.com/34-master-cylinder.html
@XavierDelcourt 4 жыл бұрын
ATE grease www.paruzzi.com/uk/volkswagen/various/maintenance/50551/
@zooskifilms 3 жыл бұрын
Thanks for the link!
Octane & Electrons
Рет қаралды 3,7 М.
Super Italiano
Рет қаралды 4,8 МЛН
Wildlife Moto
Рет қаралды 4,1 М.
Brook's Airhead Garage
Рет қаралды 11 М.
Airhead Barn
Рет қаралды 911
its.maarten
Рет қаралды 10 МЛН
Rimzona Wheels
Рет қаралды 1,5 МЛН
RusMovies
Рет қаралды 7 МЛН