WHAT ALEXSEAL MATERIALS TO USE AND HOW MUCH DO I NEED TO PAINT MY BOAT??

No video

WHAT ALEXSEAL MATERIALS TO USE AND HOW MUCH DO I NEED TO PAINT MY BOAT??

Рет қаралды 8,521

Күн бұрын

Seems like Spring has finally sprung for the Eastern part of the Country (up North Winter pretty much dodged us this year somehow) and this is a question I get at least a couple dozen times per day so thought it a good idea to try and address on video. I'm more of a 'Watch And Learn' kinda person so rather than do a faceplant in a bunch of Technical Data Sheets thought this might be helpful :-)
It can be confusing trying to get an understanding of the various materials and how they all play together at each of the steps of the project, but if you only focus on 1 application method (rolling) it all becomes much less complicated!
To figure out what's involved with the materials for doing a nonskid, here's the Patreon video I put together a while back. • video ~ Patreon
The Cheat Sheet on what's covered in this video:
millerboatwork...
Hope this helps!
****************************
Support the companies that help to make these videos possible (their products are the best out there, otherwise I would not be using them!!) Learn more about them below:
- Totalboat: www.totalboat....
- Alexseal Yacht Coatings: bit.ly/2tdNzZKA...
- SoftSand Rubber Nonskid Discount 10% OFF when you use code BWT10
www.softsandrub...
++ I'm now a distributor offering Alexseal product and technical support! www.millerboatw...
* Order Total Boat Supplies HERE and Help Support Boatworks Today with your purchase!:
www.totalboat....
** Looking for help with your project? Check out my Patreon page for consultation options!
/ boatworkstoday
*** Need help choosing the best resin for your project? Download our fiberglass Resin Guide:
bit.ly/2PCr72e
**** Subscribe To This Channel!!
www.youtube.co...
***** Shop our Amazon store for the materials used in this video!
www.amazon.com...
****** I'm now a distributor offering Alexseal product and technical support! www.millerboatw...
There is additional content and ad-free versions of these video’s available for Patreon supporters! Please click below to find out more!!
/ boatworkstoday
#boatworkstoday #TotalBoat #Alexseal

Пікірлер: 35

@Dan-cy4ti 3 ай бұрын

Hey Andy, hope the recovery is going well. Thanks for all of your hard work and commitment to the trade, you’re a special person.

@craigulrich3178 3 ай бұрын

Hey Andy. Love your videos! Inspired by your original Alexseal vids and needing to paint my 30 foot sailboat, and having no experience I hauled it out and went to town! All I can say is Pandora's box was opened and what I thought would be a little effort turned big real quick. My existing paint was so bad I ended up having to use the build-up primer (3 coats), then the finish primer (3 coats) and lastly Infinity Blue topcoat (4 coats).....Since I'm a glutton for punishment I decided to long-board sand between each coat! Couple lessons: 1) the result is all in the prep work, don't rush it and long board to get it right (hope to never do it again! hahah) 2) Alexseal volume calculator recommended 2-3 quarts so I bought 1 gal given no experience 3) when you think you're putting it on too thin, go thinner! Depending on roller type I was getting 2 full applications per quart.....which left me a half gallon extra! But I know I'll have to do touch-ups. My boat looks fantastic and I'm a lesson of how well their rolling additive can work when you have no experience. Wish I could attach a photo!

@HomesickforAlaska 4 ай бұрын

Glad to see you seem to be doing so well with the shoulder. I didn't see you wince once. I started watching you about 5 years ago when I was rebuilding the transom on my 1972 16' Fabuglas. It turned out great with all your helpful tips in your videos but of course I was antsy and wanted it in the water ASAP, so I never painted over the gelcoat, as I need to paint the entire boat, and frankly I just didn't want to wait to get the boat in the water. the 50 year old gelcoat is actually still in great shape outside of 50 years of yellowing and the top cap being an awful faded Avacado green. Been planning on using the Alexseal every since you did your very first video with them, in fact I immediately started trying to get literature and color cards right after that first video of yours and frankly it was a little difficult, took about 3-4 months to actually get anything from them. I am sure the dealer network has matured since then and hopefully I will get it done this fall.

@johncapo3497 4 ай бұрын

+1000 on using the Roll Additive. It really makes a big difference in the finished paint film.

@leesmith5419 4 ай бұрын

Thanks for the video it does simplify things and I hope your shoulder heals very soon

@todddunn945 4 ай бұрын

Good info. Based on how much you were moving your hand it looks like your shoulder is recovering well.

@boatworkstoday 4 ай бұрын

Hey Todd! Yea all things considered feeling pretty good! Little tender at night but that's to be expected :-)

@weslassiter9203 3 ай бұрын

Hey Andy question. With the roller additive being 1% If I’m mixing up a 16ounce batch what is the 1% in volume that I’d add. Also do I only use the roller additive on the finish coat or the primer as well. 3:54

@johnnylightning1491 3 ай бұрын

Good information Andy. Keep the good stuff coming.

@coleriback3177 4 ай бұрын

I did the hull of my 85ft gulfcraft, 3 coats with less than one gallon of flag blue. Very impressed

@edgatewood9463 3 ай бұрын

Thanks Andy, I tried to get an answer from Tech Support at Alexseal and got confirmation of receipt but no follow through. However, you answered my question today. I started a project with Interlux Perfection and they discontinued it before I finished. So, I switched to Alexseal after watching your videos. I was not sure if the two were compatible but Perfection is a two part product and as you mentioned you can safely use that as a base. To be safe I am going to use the finish primer as a tie coat. Thanks again, Kirk

@EricShupe 2 ай бұрын

I LOVE sanding lol!

@bowbowjang4281 4 ай бұрын

Hey there, Andy, great video as usual! I have a question regarding the primer and its coats. On my sailboat (Merit 22), some hairline cracks have formed due to age, wear-n-tear, and so on. I am curious as to whether the primer you mentioned, the 442 Finishing Primer, would actually fill these small cracks. I am planning on doing two coats of primer. Thanks again for the video! Cheers from Florida!

@ScotDolan 4 ай бұрын

I have just completed a boot strip project on Pursuit 3000 Offhsre using alexseal 501 Super Jet Black. The project came out really good. Although, it could have came out prefect had a little more information or/and experience. The paint is real amazing stuff but must be applied very thin otherwise it will drip. Alexseal could have explain the mixture, re-coat process better as well. In my particular situation i feel the accelerator might have helped especial with the late night rain but i was affraid to use it. 2 ozPart 501, 1oz Part Converter, 1% of total volume of Reducer, Roller Addictive percentage was not clearly listed so use 1/4 of cap full. Saturday - 3pm Place tape to outline the boot stripe. Sunday - 1st coat was at 11am,(80 degrees partly sunny), Applied second coat at 7pm (70 degrees partly sunny) on top with no sanding, ( rolled with 3" purdy mohair roller) Sunday - 11:45pm lite rain, some water spots but paint was ok for the most part. Monday - Sanded at 3pm (80 degrees partly sunny), applied third coat at 5pm ( rolled with 3" purdy mohair roller) Monday - 11:45pm removed tape - Hopefully paint does not run but, i was nervous tape would not come off or would cause the paint to chip if i let the tape sit too long as Tape has on been on since Saturday, 24hr since second coat, 6hr since third coat. I will find out tomorrow whether the i removed the tape too early. Learned - The roller could not get close to through hole fittings so, i first used a brush which dipped. Later I learn to just use a sponge brush a just slightly dab the sponge on areas that need paint which the roller can not reach. The sponge needs little to no paint on it. This method worked good. Learned - It seems you can leave the tape on between coats. I will find out tomorrow whether the i removed the tape too early. Thanks for your help!

@jimmymontes7426 3 ай бұрын

Another very informative video Thanks Andy

@jasonbourne314 3 ай бұрын

Another great video... keep them coming!

@skipbaker529 4 ай бұрын

Great tutorial! Cheers!

@davestewart9146 4 ай бұрын

Thanks Andy 👍😁

@nolinovio6748 4 ай бұрын

awesome

@porkchop955 3 ай бұрын

I want to paint my 20' skiff that is stored on a trailer. Is 501 the appropriate product for the bottom?

@aquious953 3 ай бұрын

My boat has old awlgrip polyurethane that's in satisfactory condition. I've got epifanes polyurethane to go over it. I'm wondering if these paints are compatible? I don't have the money to prime over the old awlgrip.

@airsoftdudechannel6180 4 ай бұрын

Andy i need to paint the aluminum bracket in my boat, im planning to use total boat total protect for first layer of primer, after that can i apply the 4402 primer from alexseal and then the topcoat also from alexseal ? Thank you

@davesmith8053 3 ай бұрын

If a guy wants to spray whats good quality air paint gun /filter set

@markgallagher1376 4 ай бұрын

Andy do you know if you can use Alexseal top coat below the water line if the boat will be in salt water continuously for less than 5 days at a time?

@boatworkstoday 4 ай бұрын

Really not a good idea :-/ Pretty much guarantee it's gonna blister after that long. Traditional bottom paint a much better option and a lot easier to maintain :-)

@markgallagher1376 4 ай бұрын

@@boatworkstoday I should have mentioned this is epoxy and fiberglass over plywood boat. Not a polyester boat. Not sure if that makes a difference.

@ScotDolan 4 ай бұрын

I just painted some exhaust tips which are partial submerged and boat stay in the water. I will keep you post on results.

@ScotDolan 4 ай бұрын

@@boatworkstoday This is common question. I have painted some resin based exhaust tips with 501 and they are going to partial submerged for the season, Can we create a forum so, i can share the results.

@mikejustice1196 4 ай бұрын

Hi Andy, the myth… paint will stick without primer, and paint and primer mixed works. Biggest joke in the painters world.^^^^^^^^^^^^^^^^^ All paint applied to ANY surface must have a least one primer coat or… The best example I can think of are garage door jams at the base. I see them every day, paint peeled because the jam wasn’t primed and then painted. Not with that primer paint mixed BS they sell customers at the stores. Ask any Sherwin-Williams employee. Thanks for this video

@choimdachoim9491 4 ай бұрын

So...having much trouble talking with only one arm to wave around?

@boatworkstoday 4 ай бұрын

Just end up talking faster lol :-)

@stephs1571 4 ай бұрын

Hi, I've sent you an email via you website. Too long to write here. Thanks.

@Junkuroni 3 ай бұрын

Hay andy i have a 1984 holiday mansion. How would i know what products i need to repair original fiberglass . I need to fix some small holes in fiberglass and repaint the boat