Bobbin Winding on the Janome 15000 (9450/9400, S9, S7 too)

Рет қаралды 9,413

3 жыл бұрын

Here's a quick video on how to wind a great bobbin every time!
Amy is a Janome dealer, sewing machine educator, and quilting instructor. Learn more at amyquilts.com where you can also shop for Janome accessories, fabrics, thread, quilting rulers and more.
Want more tips on using your high end Janome machine? Check out the free tips on the AmyQuilts Facebook page. / amyquilts
For more comprehensive teaching, consider joining the AmyQuilts Clubhouse, a membership site that helps you get the most out of your Janome machine! www.amyquilts.com/amyquilts-c... Enrollment is currently open until Sept. 29, 2020 and won't open again for another 6 months or so.

Пікірлер: 40

@devorahshaked2829 2 жыл бұрын

THANK YOU SO MUCH!!! Finally a video as to how to wind a bobbin that explains why one holds the thread taut and till when. And how to place the bobbin on the winder so that you will get a tight even winding.

@AmyQuilts 2 жыл бұрын

Glad you liked it!

@jdmarr2259 2 жыл бұрын

Thank you for this most informative tutorial. I've been doing it all wrong. I know it doesn't include the S3, but I'm going to try this because I recognize the same bobbin winding set up on my machine.

@joannmcculley8253 7 ай бұрын

Never knew about rotating a bobbin until it clicks 😮

@deidrapowell8762 3 жыл бұрын

You know I saw the title and was like I don’t need that. Boy was I wrong! I learned several things. Thank you!

@AmyQuilts 3 жыл бұрын

I'm so glad the video helped!

@AmyQuilts 3 жыл бұрын

Sometimes it's the little things that make a big difference!😊

@judyburgei6245 3 жыл бұрын

I never knew about turning the bobbin till it clicks. I just tried it & it works great. I was always pulling the thread through the hole in the bobbin & sometimes struggled to get the thread wrapped correctly. Thank you.

@AmyQuilts 3 жыл бұрын

I'm so glad the video helped!

@stephanie_l 9 ай бұрын

Thank you! The little click is missing from the 9400 manual and I have been having issues for weeks! You are a life saver.. Perfect bobbins now.

@susanirwin5577 2 жыл бұрын

I never knew about the click on the bobbin thing!! Thank You!!

@maryhense5895 3 жыл бұрын

OMG!~I was totaling doing this wrong. From not holding it tight around the slots to not locking the bobbin in place with that doohickey. Can't wait to go wind new bobbins now! Thanks so very much for this video!

@AmyQuilts 3 жыл бұрын

😊

@Murnas1 2 жыл бұрын

Well, it is possible to teach and ole dawg new tricks. Thank you sew much.

@teripayette2580 3 жыл бұрын

Thank you so much! I just unpacked my S9 and could not wind the bobbin until I watched your video. Thank you!!!

@e.m.m.1791 3 жыл бұрын

Thank you, Amy, for this video! I just learned several things I didn't know, and I will definitely be following these steps on my next bobbin. I shared this link with the FB Janome 9400/9450 page since some have posted their troubles with bobbin winding.

@jannawianecki9510 3 жыл бұрын

What a great video! So clear and I learned about the click too. Thank you!

@AmyQuilts 3 жыл бұрын

Sometimes it's the little things that make a big difference!😊

@beckypetersen2680 3 жыл бұрын

Yes! Thanks. I've got to go check out my 12000 and 8900 to see if they have the click. Never noticed that and I've had problems with bobbin winding being a lottery. Just checked - and my 12000 doesn't have a place to click into nor does it have the little whirly gig thing underneath it. Sad face. My 8900 is at the shop at the moment but I'll look when I get it back.

@AmyQuilts 3 жыл бұрын

They do!

@newbiecrafter 3 жыл бұрын

Terrific video with great close ups to enable owners to see what you are doing and why!! Will recommend it to all experiencing issues. Thank you

@AmyQuilts 3 жыл бұрын

Thank you right back! 😊

@Terry3241 3 жыл бұрын

Thank you so much! Finally know why my bobbin would never wind properly

@AmyQuilts 3 жыл бұрын

Yay! The littlest of things can make a big difference.

@yc70jade 3 жыл бұрын

Thank you! This is definitely a whole lot more informative than the manual 🥰

@AmyQuilts 3 жыл бұрын

Thank you! (Sadly true 😆

@vickygreer2418 3 жыл бұрын

Thank you Amy. I had gave up on using the winder on my S9. Bless you for showing where I was going wrong!!!

@samanthaschurter747 2 жыл бұрын

Thank you! This was very helpful

@michellenaranjo4340 5 ай бұрын

I have always wondered why that little straight notch was on my bobbins. I am almost positive that my manual (mc 10k) didn't mention lining that up with the wire. I stumbled upon this video because I was having issues with my bobbins winding slightly unevenly and now I'm wondering if that was why. I was trying to adjust the bobbin winding thread tension screw to fix it. Thank you for that detailed explanation!

@gwenharlow4328 3 жыл бұрын

I always wondered what that thing with spiky bits was for under the bobbin. (8900) This works just great, Many thanks for showing us all this.

@AmyQuilts 3 жыл бұрын

I'm so glad the video helped!

@debjacobson9800 3 жыл бұрын

Thank you Amy 😻

@AmyQuilts 3 жыл бұрын

I'm so glad the video helped!

@patriciahatch5038 3 жыл бұрын

So, my question is this - why aren't these directions in our manual? Great video - thanks!

@AmyQuilts 3 жыл бұрын

They typically are....but usually in those illustrations that can be hard to figure out.

@user-el3bk2vk7v 10 ай бұрын

My 15000 always winds bobbins badly. It seems to bulge in the middle. Any ideas for that? Maybe following your instructions might solve. Thanks so much

@bonbonmonel9571 3 жыл бұрын

Thanks for the video Amy. What is the heaviest thread that the 15000 can handle? I make bags and backpacks. I use heavy fabrics for those. So need advice on thread and needles for vinyl and canvas. Thanks again.

@stephanniemetz3610 3 жыл бұрын

BonBon Monel I us Aurifil 28wt with no issues. But its cotton and really a polyester thread is best for bags.... I really need to get a few brands and weights to find the best one.

@bonbonmonel9571 3 жыл бұрын

Stephannie Metz Thank you. I’ll have to keep experimenting to find the best thread and needle for the thickness.

@AmyQuilts 3 жыл бұрын

28 wt is awesome, but I've used 12 weight sometimes...have to fiddle with the tension and choose the right needle, but it does ok.