Boeing 757-767 Throttle Quadrant Build
Рет қаралды 23,603
3 жыл бұрынThis all started when someone asked if I could create a 3D Printed 757 throttle after showing my 737 Throttle Build. I wasn't to keen at first, but I needed a break from the 737 throttles. In the background, this is what I came up with.
A massive Thank You to Sebi Woelke for the Intro and Logo!
If you fancy helping support the channel and the build we can be found here:
PATREON
A couple of people have asked if I have a Patreon account, I finally got around to creating one. If you fancy showing support for the videos and build:
/ 737diysim
The plans/designs/cad and wiring diagrams are available at WWW.737DIYSIM.COM.
Facebook: Boeing738v2
Instagram: 737DIYSIM
@fernandovilela4406 20 күн бұрын
Hey man, my girlfriend and I are so amazed. Your video is just absolutely great. We are pilots in Brazil and you are giving a big contribution to the community of pilots in the world.. Ooooh, one more thing... It is so nice to see you having a great time building it! Just thank you so much!
@Mickeys_Flightdeck 3 жыл бұрын
When I saw all these printed parts I thought a 24 minutes video can't communicate the time it takes to design and print all these. Well done and a great work for a "side project".
@helimech8152 3 жыл бұрын
Thanks Mickey! Now i need to stop procrastinating and move forward with the dual controls! I look forward to watching your video later! Kind Regards Karl
@enriqueeenriquez8818 Жыл бұрын
I have you in my DIY Hall of Fame. Permanent Member. The displayed attitude, willingness to share your knowledge and building will. Not sure if you ever sold these parts as non-finished or completely finished parts.
@Danno-df9hq 3 жыл бұрын
This, as always, great looking build. Didn't even finish the 737 throttle yet, but this makes me build the 767/757 too :D
@helimech8152 3 жыл бұрын
Hi Danno! Great to hear from you and thank you for the support! Kind regards Karl
@rickestabrook4987 3 жыл бұрын
Amazing, and so much fun to watch. Your natural joy in the whole process makes it all the better.
@helimech8152 3 жыл бұрын
Hi Rick, thank you for the kind words and support! It was a fun build and didn't require to much finessing. Kind regards Karl
@hkr4life 8 ай бұрын
wow. one of the best channel on youtube
@helimech8152 8 ай бұрын
Haha thank you, but it's a very Niche subject!
@robinlovell1617 2 жыл бұрын
That is an absolute work of art my friend. Very, very well done.
@helimech8152 2 жыл бұрын
Thank you so much 😀
@hydrolisk1792 3 жыл бұрын
It is so nice to see a community of people with the same interest coming together! That is what brings me joy! Loads of other sim builders here in the comments! Hopefully within the next few years ill be building my A10c, after of course im done with flight mech school abd have a nice job. Very good job on the controls as always
@helimech8152 3 жыл бұрын
Thanks Hydrolisk1972, this one really seems to have got people to comment! Kind Regards Karl
@johnmheaton 3 жыл бұрын
Fantastic as always Karl. Thank you so much for your continuing enthusiasm and guidance.
@helimech8152 3 жыл бұрын
Hi John, thank you for the kind words and support! Kind regards karl
@MAndresRaM 3 жыл бұрын
His work is impeccable and of high quality. Thanks for sharing.
@helimech8152 3 жыл бұрын
Hi Manuel, Thank you and humbled! Kind Regards Karl
@gracebyseven 3 жыл бұрын
Love your videos, so inspirational! You give out such a positive vibe with all the smiles ... truck on!
@helimech8152 3 жыл бұрын
Thank you for the great comment and support! Much appreciated, Kind Regards Karl
@wv838 3 жыл бұрын
Outstanding work as always, Karl. A pleasure to watch.
@helimech8152 3 жыл бұрын
Thanks for the Support! Kind regards Karl
@charlesnicholson7539 3 жыл бұрын
Wow! Amazing detail! Congratulations.
@helimech8152 3 жыл бұрын
Thank you so much 😀
@TheFlyingApprentice 2 жыл бұрын
I'm impressed with your design and engineering skills and knowledge. Keep the good work!
@helimech8152 2 жыл бұрын
Thank you very much!
@i7rooper 9 ай бұрын
That looks very professionally designed and built. I bought the files and just started the printing of the parts. Some STL models are positioned are oddly angles though. I had to disable the angle snap and rotate them carefully to a symmetrical position
@helimech8152 9 ай бұрын
Use flatten to face in your slicer software, that a much easier and quicker way to orientate hem. They come in from fusion in the orientation they are placed in the design.
@trainstrains1 3 жыл бұрын
It's always made me wonder why more people don't make things for the other Boeing aircraft. Awesome job!
@helimech8152 3 жыл бұрын
Hello, i really want to get the 737 complete, then move on to other aircraft that others need help. That the plan! Kind Regards Karl
@trainstrains1 3 жыл бұрын
@@helimech8152 Thanks Karl. I'll be watching avidly for anything 767 related.
@86abaile 3 жыл бұрын
Incredible. You're a really good designer.
@helimech8152 3 жыл бұрын
Thank you!
@pethoviejo 2 жыл бұрын
Outstanding!
@helimech8152 2 жыл бұрын
Thank you kindly!
@TheFlyingSPR 3 жыл бұрын
Just Amazing Karl Thanks a Lot
@helimech8152 3 жыл бұрын
Hi, this was a fun project away from the 737 and a little break for me. Kind Regards Karl
@ml1186 3 жыл бұрын
Amazing stuff, thank you for the video and the walk through on the assembly :)
@helimech8152 3 жыл бұрын
Hi ML, Thank You, I was really pleased with this build and have seen some gorgeous builds since.
@ewanharris5433 3 жыл бұрын
Brilliant as usual. Well done
@helimech8152 3 жыл бұрын
Many thanks!
@CaptainBobSim 3 жыл бұрын
I like your Multicam setup! Great tutorial as always! I especially enjoyed watching this one.
@helimech8152 3 жыл бұрын
Thank You, Captain Bob. I now use my old phone as a spare camera rather than sell it on. Its a bit more work in editing, but I think it makes for better visuals.
@CaptainBobSim 3 жыл бұрын
@@helimech8152 It would be more work with editing, but I think it's very good for visuals. It sure beats waving your camera around whenever you want to change angles!
@arturchuprikov2304 3 жыл бұрын
Amazing, Karl!
@helimech8152 3 жыл бұрын
Thank You Artur!
@ryansmith1312 2 жыл бұрын
Heeeyyy I've been needing this!! I just took my type rating checkride yesterday and been considering building a quick and dirty sim while I wait to start OE. I've enjoyed your 737 MCP vid, that was the first one KZfaq suggested. I didn't actually search for it - YT algorithm is pretty cool sometimes!
@helimech8152 2 жыл бұрын
Thank you, and a lot of people have built this unit now, and I have seen some great mods for it too. Mainly the trim indicator addition. Kind Regards and good luck if you for the build. Karl
@pablo3ass 2 жыл бұрын
your work is just amazing! thankyou for sharing it, hugs from Brazil!
@helimech8152 2 жыл бұрын
Thank you so much 😀 & Kind Regards Karl
@expataviator7107 3 жыл бұрын
On how many videos do I need to request a king air throttle quadrant in the comments 😂. Amazing work as always. You’re an inspiration. Incredible!!
@helimech8152 3 жыл бұрын
Once I finally finish my sim, I put it out there and ask what people want!
@sshashlan 3 жыл бұрын
I said it before and I ll keep typing it on all of your work Fan ---- Freking --- tastic work absolutely brilliant cheers
@helimech8152 3 жыл бұрын
Thanks! That put a smile on my face!
@Pinturichio81 2 жыл бұрын
Amazing!! More B757/B767 parts !! Please
@helimech8152 2 жыл бұрын
Hello! I'm not sure how I got onto this, but more 767 parts are a popular request! Ill see what I can do!
@Pinturichio81 2 жыл бұрын
@@helimech8152 great 👍
@chrisybradshaw8594 2 жыл бұрын
Wow so so amazing
@helimech8152 2 жыл бұрын
Thank you!
@PepitoLDDT 3 жыл бұрын
Great job, thanks for jour job 👍 Super boulot, merci pour votre travail.
@helimech8152 3 жыл бұрын
Merci beaucoup
@kantrys 3 жыл бұрын
Great video!
@helimech8152 3 жыл бұрын
Thank you Joselio, great to hear from you.
@marcelon26 3 жыл бұрын
Wonderfull work! Greeeeeeeat!
@helimech8152 3 жыл бұрын
Thank you! and cheers for the support!
@helmuthrendl6560 2 жыл бұрын
You are a Genius
@helimech8152 2 жыл бұрын
Thank You! I will will have to update this one day to an even better version!
@mryunas7071 3 жыл бұрын
You sir are the king of DIY. A gifted man indeed.
@helimech8152 3 жыл бұрын
Hello from Brunei! Thank You for the kind words. Feeling Humbled. Karl
@Utube2Itube 3 жыл бұрын
Karl, I stumbled over your channel fairly recently and I love how it combines some of my biggest hobbies and interests, aviation and diy projects. I’m basically binging through all your videos now. I must say, watching your channel leaves a lot of interesting questions, like how did you end up in Brunei, what do you do for a living, etc. I understand if you want to leave your private life out of this, but some kind of Q&A video would have been really interesting 😊. Keep up your great work! Edit: just noticed you have quite some info about your background on the website. Just what I was looking for 😄👍🏻
@helimech8152 3 жыл бұрын
Hello from Brunei, Great to hear from you and thank you for taking the time to comment. I did create a page on the website as I get asked a lot. Glad you found it. Keep safe and warm regards Karl
@kristian4559 3 жыл бұрын
Amazing work as always ! :)
@helimech8152 3 жыл бұрын
Hi Captain K, thank you! Even though I don't tend to use this, it should look good on the shelf in the sim room.
@kristian4559 3 жыл бұрын
@@helimech8152 yeah i'm building a 737 myself but i am sure many people will appreaciate it
@foxwestjava 3 жыл бұрын
Master of Creator DIY SIM .. 👍👍
@helimech8152 3 жыл бұрын
Thank You and once more Humbled. Kind Regards Karl
@tcdontplay4914 3 жыл бұрын
incredible
@helimech8152 3 жыл бұрын
Thank You!
@willplanes6441 3 жыл бұрын
y you're an absolute madman. Such a brilliant job. Marvelous. Next 777 ? (NB: how strong are 3d printed parts, whether it's a yoke or a throttle quadrant, is it easy to break or is it rather strong ?)
@helimech8152 3 жыл бұрын
Hi, I'm actually surprised with the strength of printed parts sometimes, but they are very weak at certain joints when you use low infill settings. I'm sure after a few weeks of feedback, that will be the real test! Always learning!
@samuelhulme8347 3 жыл бұрын
Brilliant
@helimech8152 3 жыл бұрын
Thank you
@dantican3800 3 жыл бұрын
Such a great job! I finished my 737 throttles and working on the MCP. Thanks for showing us what’s possible! 777 in any future plans?
@helimech8152 3 жыл бұрын
Hi Dan, Thank you. As for the 777, not just yet. I want to get these dual controls finished first so I can use my own sim. But I would like to complete the throttle set! So hopefully sometime in the future!
@rjc358 3 жыл бұрын
First this is keeping me entertained
@helimech8152 3 жыл бұрын
Awesome!
@AlphaFloor320 11 ай бұрын
You are a builder god ! Amazing job !! Make Airbus parts ! :D
@helimech8152 11 ай бұрын
Thank you ofr the kind words! I like to stay away from Airbus to give others a chance to strut there stuff!
@antoniolaranjeira2072 3 жыл бұрын
Simply the best! Amazing work as I already mentioned before on Instagram. Please do Airbus things tooo! A throttle quadrante Airbus a320, please!
@helimech8152 3 жыл бұрын
Hi Antonio, I tend to stay away from airbus as there are already so many builds out there. I also know nothing about the operation. One day perhaps! Kind Regards Karl
@antoniolaranjeira2072 3 жыл бұрын
@@helimech8152 where are so many builds acessible to the community via 3D printing like yours? Nowhere! Not a single one, or maybe I didn’t find anything, and your quality?? No way Karl, you are simply the best, and iam only supporting, I don’t fly a 737 sim, but a 320sim, but I know the difficulty and leak of information to build a budget a320 sim, 737 is more easy to find info and now quality 3d printing budget from you, that is a great feat for community 🙏👌
@Mottersmotters 3 жыл бұрын
Great, no not great Fantastic videos. I don't plan on building a sim but love to watch your videos. Fancy becoming my new best friend? Love the work you do. Ever thought of showing us how you design these things. Fab work from the UK
@helimech8152 3 жыл бұрын
Hello From Brunei, That comment made me chuckle! Designing from scratch can be quite a boring thing to watch, so never really thought of it. But a few people have asked the same thing. Perhaps i can find something small to replicate! Thank you for the kind words, warm regards Karl
@Mottersmotters 3 жыл бұрын
@@helimech8152 I just love the stuff you do. I have a loud 3d printer and fusion. Don't use both as much as I should. I used it when both were at work but now they are t home and I can hear the printer all around my house 😭😀 Just googled where you are. Wow so far away. Great work Karl and you are always smiling no wonder doing that sim 👍🏻
@muhammadahdalularayhanfasy8092 3 жыл бұрын
Because of you I'm inspired to start working on Concorde sim. Still years of work though, and I need to save for CNC and 3D printer
@helimech8152 3 жыл бұрын
Hi Muhammad, that's fantastic to hear! Take slowly and at your pace. Both the CNC and 3d printer are amazing tools for any creative hobby!
@scottsassafraz1980 3 жыл бұрын
Absolutely epic, your parts looks great. Did you iron them?
@helimech8152 3 жыл бұрын
Hi Scott! Yes, I have only just started though! I liked the look in the handles. Merry Christmas Karl
@greysonvalleyrrbarnesville152 3 жыл бұрын
NO ONE keeps a workbench that clean.
@helimech8152 3 жыл бұрын
LOL! If you could see off camera, or at the end of the day, its a whole different story! Add in prototyping when there's no camera and it looks like a bomb has gone off.
@TayTayVideoGaming 2 жыл бұрын
A better way instead of sanding the paint off is to gently wipe it off by sliding the text across a surface that picks the paint up better than the plastic, different paints wipe on different things better.
@helimech8152 2 жыл бұрын
Tahnk you!
@majstordaki 2 жыл бұрын
I didn't know Jean Claude Van Damme is into flight sims! Jokes aside, awesome work!
@helimech8152 2 жыл бұрын
Haha! Thank you! Kind Regards Karl
@AlphaFloor320 4 ай бұрын
Hello ! Very nice job you are the best ! I need advice. I’m working on A320 throttle quadrant. What kind of electric wire did you use ? With 2 potentiometer and 2 push button (and maybe motorized trim wheel), which electronic card do you think is adapted/easiest to program ? Arduino (which one?) ? Or other one ? Thanks for your help :-)
@harvesthunt 2 жыл бұрын
Love your vids. Hoping you clone yourself to show us how to build an Airbus A320 cockpit! ;)
@helimech8152 2 жыл бұрын
Hi Bill and thank you. That seems to be a highly requested item right now! Kind regards Karl
@SteveMorrisTCS 3 жыл бұрын
Really great to watch your builds. What 3D printer would you recommend? As an ex military helicopter engineer I can relate to your enthusiasm and precision and could be tempted to start a 737 build based on your design.
@helimech8152 3 жыл бұрын
Hi Steve, I would highly recommend the Ender 3 v2 or pro if you want slightly cheaper. Great to hear from a fellow vet especially in the same trade! I hope this finds you well. Kind Regards Karl
@mick-tf7xj 3 жыл бұрын
Well Karl what can I say ,..........brilliant build once again ,.......now does this mean I have to build a 757 or 767 now ,let me ask the mrs . I think I know the answer will be !
@helimech8152 3 жыл бұрын
Hi mck, this was just for fun really, but I did enjoy making it!
@karlheinzmrazek830 3 жыл бұрын
you are perfect!
@helimech8152 3 жыл бұрын
Hi KarlHienz, thank you
@SimPilot-dl8zy 3 жыл бұрын
Very cool. I have to build this. Do you have a plan for a motorized trim wheel for this version. That’s the one thing I would like to see on a build. Thank you for sharing your knowledge with us. You are one of the few that really explains what and how to build items like this so that others can build them.
@helimech8152 3 жыл бұрын
Hi, i am building a motorised version of the 737 in the background. But all my attention is on the dual control yokes at the moment. I will return to this project hopefully in the new year. Thank you for the kind words, Karl
@SimPilot-dl8zy 3 жыл бұрын
@@helimech8152 fantastic work by the way. I am building or should I say trying to build a motorized A320 Quadrant. Being fairly new to electronics and Fusion 360 it is a challenge.
@vt1405 3 жыл бұрын
Hi Karl Thank you again for your beautiful work. Do you have the entire project for 757 cockpit? If you don’t, do you intent to do it?
@helimech8152 3 жыл бұрын
Hi, I have no intention of anything but 737 at the mo. I want to get the controls done so I can go flying in my own sim. But I do enjoy the build process.
@joemamma1861 3 жыл бұрын
I want that
@akhilvijay8670 2 жыл бұрын
Amazing...This is what I am looking for? I am designing a Boeing 787 home cockpit. 767 throttle quadrant is similar to 787 series .I made a fusion design with full movement. But I am not able to complete this without any specifications or refference. I searched everywhere to get some idea about the dimensions. This video will get some new ideas. Can you upload the dimensions in your website. Waiting for ur reply
@helimech8152 2 жыл бұрын
Hi, this was a specific single request by a fellow simmer. I wouldn't take my dimensions to heart, I think I winged the whole thing!
@akhilvijay8670 2 жыл бұрын
@@helimech8152 Thanks for the comment. Can you make a new project. Project 787-10. :) I think this is more simple than a 737. If you start, please inform me. Any way I am with you. You have a great patience and will power. Thank you
@seraasi1086 2 жыл бұрын
when havening air presurized on cabine ...? this air have something influence above someone system ??this air is very pressure could be failed someone system( because one bad presure on cabine )
@mungo7136 3 жыл бұрын
I am literally looking forward to that next episode, because searching white sheep in the herd of white sheep has to be a great adventure. Are grey wires the only ones locally available? :-) I like both your throttle quadrant designs but I fly World War 2 sims, where are dual engine planes, but they require propeller and mixture settings as well, so more levers are required. And I think about use of the bearings and maybe hall sensors. Thus I wonder how difficult it is going to be to modify your design to fit such a plane
@helimech8152 3 жыл бұрын
Hi Mungo, All wire is available here, its just the quality is so poor is fails very quickly. The wiring you see in my vids now is recycled aircraft wire which is awesome stuff to work with. I would highly recommend starting a fresh design than modifying mine. Its just easier to start from scratch and purpose build it. This is the major let down of the 737 v3 throttle. It was modified from the Saitek unit. It would have been much easier, simpler to start over! Kind regards Karl
@mungo7136 3 жыл бұрын
@@helimech8152 Thanks for the answer - quite interesting, those wires. I have to plan that design - it is quite difficult to think out controller that fits several planes. Which - despite being similar in some way - differ in way their flight controls works. Anyway, quite a lot of inspirational ideas. Do you know roughly total print times of such a project?
@Soryueva02 3 жыл бұрын
AMAZING!...747 maybe?..... xD
@helimech8152 3 жыл бұрын
Hello! Someone has promised to send me 747 drawings. If that happens, I will create them. Kind Regards Karl
@Soryueva02 3 жыл бұрын
@@helimech8152 NICE!!!!!!!!
@oldNavyJZ Жыл бұрын
I used to use lacing twine all the time. Haven't seen it in years. Where do you get yours?
@helimech8152 Жыл бұрын
I get all mine from RS online, buts its expensive! There are much cheaper brace making wax cord on amazon!
@mizzterkaden9287 3 жыл бұрын
I’m thinking of doing something like this but have a question. How do you make it so that when the potentiometer is only 90°, it is full in code/digitally?
@helimech8152 3 жыл бұрын
Hi Mizzter, not to sure what you mean, but i just calibrate the pot in what ever programme you are using.
@arturchuprikov2304 2 жыл бұрын
Karl, could you specify, which marker you use to highlight legends? Thanks
@helimech8152 2 жыл бұрын
Hi Artur, i use a Sharpie, Black or a white paint pen depending on the colour required. Legends now, i would use my resin printer, but this is a bit of a speciality purchase i wouldn't recommend one just for this. Kind Regards Karl
@henryhbk 2 жыл бұрын
Did you add a backing for he speed brake handle?
@helimech8152 2 жыл бұрын
Hello, I thinkni used hot glue, but people are now suggesting cut up mouse mat
@FGCH03 3 жыл бұрын
Do you sell your designs? They are awesome.
@helimech8152 3 жыл бұрын
Hello Fernando, Great to hear from you. The designs are over at my website: www.737DIYSIM.com Kind Regards Karl
@tonytor5346 2 жыл бұрын
AM building one. Have a real 767 center console Also CAD files for the entire cockpit OHP , Center console, frontbpanel, brakes, you name it. Am a physician with background in electronics 70’s & 80’s. Getting acquainted with Arduino. Ler me know how you want me to send you the CAD files.
@helimech8152 2 жыл бұрын
Hello, and thank you for the wonderful offer! You can find our details on: www.737DIYSIM.com We are currently moving to the otherside of the world right now, so things are a little slow as all our equipment is in a container. Kidn Regards Karl
@Danno-df9hq 2 жыл бұрын
Hi there, did anyone manage to get the LED toggle switches to work as intended with mobiflight?
@helimech8152 2 жыл бұрын
Hi Danno, You may need to ask this in the website forum and describe how they should work. Then I can probably help you out or try to find a solution. Kind regards Karl
@marvinbrooks2601 2 жыл бұрын
Is there any way that you could assist in constructing CJ4 THROTTLE BODY
@helimech8152 2 жыл бұрын
Hello Marvin, I currently do not have time right now, as we are getting ready to move. Kind regards Karl
@georgefaulk2528 2 жыл бұрын
Where's the wiring video for the controller board that was promised?
@helimech8152 2 жыл бұрын
Hello George, Awesome people skills there buddy! It's coming, One man and a million things to do. However, the wiring diagrams are on the website, they are the same as the 737 throttles. Both Leo Bodnar and Micro connections. Kind Regards Karl
@TheLukemcdaniel 2 жыл бұрын
wouldn't it be better to get wires that are already color coded, and fully color coded, than try to rely on sharpie marks at the ends?
@helimech8152 2 жыл бұрын
I have over 100KGs of recycled aircraft wire, which is by far superior to anything from eBay. This is why i now use it and because its Free lol.
@shairamsyar9841 3 жыл бұрын
Hi, where can i meet you to custom mine in Brunei?
@helimech8152 3 жыл бұрын
Hi Shair, Well if your in Brunei that's a different matter! Pop down to KB and say hello! My watsapp is 006737207616. Kind Regards Karl
@karthikk6512 3 жыл бұрын
Hey i know u do boeing sim but please Do u know anyone who made their own airbus sidestick any website or any yt videos Thanks
@helimech8152 3 жыл бұрын
There's only one guy i know who creates A320 parts and that's Jacek Dziedzic. Head of Airframe Labs. You could try him.
@murgias 3 жыл бұрын
great job.... How about B777 ?
@helimech8152 3 жыл бұрын
LOL! People are going to get bored of me building just throttles! But if you have any dimensions or drawings, I will give it a go! Kind Regards Karl
@murgias 3 жыл бұрын
@@helimech8152 I have some, I'll send you an email. Regards. Stefano
@murgias 3 жыл бұрын
@@helimech8152 I've sent you an email with some measurements. I would be really grateful if you could do it, otherwise if you think I can modify the 767TRH, I can try if you give me indications on which software to use.. thanks Stefano
@vnavspeed6737 3 жыл бұрын
You print everything with Ender 3 pro ?
@helimech8152 3 жыл бұрын
Good evening from Brunei, I now have two ender 3's. The pro and v2. But I think most of the internals were actually printed on the tronxy A8 as the ender 3 broke and was out of order for weeks.
@vnavspeed6737 3 жыл бұрын
@@helimech8152 i was going back and forth between Ender 3 and CR-10. Im looking for a larger print space. Which one you think would be ideal ?
@Alex-Aviation 3 жыл бұрын
Now is just to figure out how to motorize all this
@helimech8152 3 жыл бұрын
Hi alex, not for me on this one. I'll stick with motirising the 737. But hopefully the same can be used for this design.
@simulatorpapua2498 3 жыл бұрын
Wow, a lot of people request for throthle ?
@helimech8152 3 жыл бұрын
Hi Deni, all one of them I think! Just wanted to try something different!
@mikolzpoznania736 2 жыл бұрын
Works with FF 767/757?
@helimech8152 2 жыл бұрын
Hello, It's just a joystick replica in the 757/767 throttle shape.
@blazinthat7439 3 жыл бұрын
What gauge wire is he using guys?
@helimech8152 3 жыл бұрын
I was lucky a few years ago that we modified our fleet of helicopters. This meant I had hundreds of meters of discarded, reusable aircraft wire. This wire is by far superior to anything have found from china on eBay. The part number is: 55A0811-22-9 It's 22 AWG, but 24 AWG will also work the Arduino 5V items and the part number is: 55A0811-24-9 Mouser and TE stock this for around $0.25 to $0.53 a meter
@blazinthat7439 3 жыл бұрын
@@helimech8152 I love that white wire, looks nice and seems to be the right amount of flex. Thank you for the information on that i really appreciate it! Glad I found this channel. Didnt even notice it was stranded, I thought it was solid core.
@rjc358 3 жыл бұрын
How many of these have you built?
@rjc358 3 жыл бұрын
Wish I had enough money to build one for myself keep it up!
@helimech8152 3 жыл бұрын
Hi Riley, this is the first 757 one, in fact it's the build prototype. But I have now created 4 different Boeing versions of throttle in total. Well done on being the first to comment!
@helimech8152 3 жыл бұрын
I'm guessing you don't have a 3d printer? Getting them printed by a third party is expensive! But when you self build the costs are manageable.
@rjc358 3 жыл бұрын
@@helimech8152 Thanks I will start saving!
@helimech8152 3 жыл бұрын
Good luck!
@shairamsyar9841 3 жыл бұрын
How much if u sell those?
@helimech8152 3 жыл бұрын
Hi Shair, I can only sell the design at the moment on the website www.737DIYSIM.com. I have no viable postal service currently due to covid restrictions.
@wvs-arguingpsychology2357 2 жыл бұрын
Can i buy one i dont have 3d printer
@helimech8152 2 жыл бұрын
Not really, what makes these projects cheap is that people can build them their selves. I don't think I could produce it at a price people were willing to pay. And that would be build cost, not profit cost
@wvs-arguingpsychology2357 2 жыл бұрын
@@helimech8152 alright thank you
@tonytor5346 2 жыл бұрын
Did you get my message.
@helimech8152 2 жыл бұрын
Thank you, i just replied!
@activex7327 3 жыл бұрын
This doesn't look like it is 1:1 scale to the real one. The real one is bigger.
@helimech8152 3 жыл бұрын
You are correct, this is designed to fit on my Ender 3 printer bed.
@user-oi3zi8rr9x Жыл бұрын
I have bought this
Jason Derulo
Рет қаралды 20 МЛН