Bolt-On Face Off: '21 Challenger 6.4L VS '21 Mustang 5.0L

Рет қаралды 14,212

Күн бұрын

Anyone can Google factory stats for various performance cars, but have you ever wondered how competing cars perform on the dyno with the same modifications? That's exactly what Bolt-On Face Off is all about!
And in this episode, we pit '21 Challenger 6.4L against '21 Mustang 5.0L, as we equip each with our Stage-1 and Stage-2 packages, and put each to the test on the dyno! Who comes out on top? Are the upgrades worth it? Let us know in the comments if you're team Challenger or team Mustang!
Looking for more performance out of your vehicle? Learn about our Performance Packages here: nationalspeedinc.com/packages
We want to hear from you!
Contact Us: nationalspeedinc.com/contact
Phone: 833-628-7733
Connect with National Speed online:
Subscribe to our KZfaq channel: / nationalspeedinc
Visit our Website: nationalspeedinc.com
Like us on Facebook: / nationalspeed
Follow us on Instagram: / nationalspeed
Visit us at one of our shops: nationalspeedinc.com/locations
_ _ _
0:00 - Intro
0:52 - Baseline Dyno
2:25 - Challenger Stage-1
3:38 - Mustang Stage-1
5:14 - Mustang vs. Challenger - Stage-1 Comparison
5:31 - Challenger Stage-2
7:07 - Mustang Stage-2
9:19 - Mustang vs. Challenger - Stage-2 Comparison
9:39 - Conclusion

Пікірлер: 79

@warzon3396 Жыл бұрын

Comparing auto vs manual with drivetrain loss kinda apples to oranges

@Texas_Road_Warrior Жыл бұрын

Taht big flat spot from 5000-7500rpm on the coyote is why the 10speed is so lethal, it never quits pulling or loses power anywhere in any gear change 🤣

@bobbyprd Жыл бұрын

Love the shootout! Not only great info but some good knowledge!

@downsouthtv4616 2 жыл бұрын

Great content.

@jimmymccormick142 Жыл бұрын

Awesome video there's one more step I'd love for you to take is Tim both of them with e85 and see where we would land

@danv8717 2 жыл бұрын

Awesome video!

@NationalSpeedInc 2 жыл бұрын

Thanks for the words, Dan!

@shadowdemon5730 Жыл бұрын

Excellent video. Any chance of doing a mod comparison with trucks? F150 vs Ram Hemi vs GM 5.3 and 6.2 would be sick.

@pitneybowes-wf4yq Жыл бұрын

The tech looks like Dirk lol awesome work and video

@sergebasque8460 Жыл бұрын

Great gain on both vehicles, on the mustang did you use all factory head stud with those header, are the long tube the stainless power brand.Thanks!

@chetmanley610 11 ай бұрын

The stock headers on the 6.4 flow extremely well.

@MasterCarguy44-pk2dq Жыл бұрын

3800 lb mustang vs 4460 lb chalky. The average rule is 12 hp per every 100 lbs of weight difference. So to equal the chalky, chally, lol, youd need 430 rwhp, but it now has 460 rwhp. 10 more than crank rating. Mustang is suppised to be dynod in 7th gear with the 10 spd BTW. From the looks of it, you dont start at 1400 rpm. 2500-3000 is where you start.

@dedlock658 2 ай бұрын

That's why NA It's are dominant over the hellcats

@nooneymotorsports Жыл бұрын

On the results from the headers you compare the mustangs results with stock baseline run instead of the intake test. But with the challenger you do compare it’s header test with the intake test so in all actuality it’s not much of a gain as your stating

@josemanuelruiz2036 2 жыл бұрын

Very cool video! You guys answered a question that I had in the back of my mind for several years: what are the HP and torque gains for a 6.4 with better air intake and headers? This makes me consider even more the Scat Pack. Thanks!

@NationalSpeedInc 2 жыл бұрын

Glad you enjoyed it, Jose! Thanks for watching.

@2camsam Жыл бұрын

If you would have removed the resonator on the mustang it would have picked about 7 more hp

@jaythewrapper239 11 ай бұрын

People forget about weight to power ratio 😂 reason why ten speed 5.0 whoop scats

@arturomolinapedroza25 2 жыл бұрын

Camero SS with a manual transmission next please vs Lexus RCF

@NationalSpeedInc 2 жыл бұрын

Oooo, that would be a great one!

@SirJamesTND 2 жыл бұрын

I want to see the LT1 V8 full na build. Its on the site but no vids

@raceredbetty4514 Жыл бұрын

Rcf is too heavy

@Desertjoker 6 ай бұрын

Should have raced them against each other for the end of the video lol jk 🔥 content.

@chopdogrulz1337 2 жыл бұрын

Very good video covering exactly the mods I’m planning on doing. Were these tests done on 93 octane?

@NationalSpeedInc 2 жыл бұрын

Yep! All done on pump 93 octane.

@MasterCarguy44-pk2dq Жыл бұрын

In muscle cars, manuals always make more power so this was a bagged test from the get go. Ans this goon doesnt specify dyno type either. And he needs to be clear drivetrain loss is "estimated", since theres any one of 5oo components that can affect drive train loss and it has never been figured out.

@10r80vega Жыл бұрын

Did you guys re tune the car after installing the headers ?

@stevenbabinski7635 11 ай бұрын

I love and adore the challengers but the one thing people never take into consideration is the weight. The mustang will just walk the challenger especially having the 10 speed auto and being lighter. The torque will give the challenger the jump off the line but the mustang will catch up. Having owned both a challenger scat pack and mustang gt with the coyote I would go with the mustang if I wanted to build something for sure. They just take nods so much better

@antz19coyote73 Жыл бұрын

So you dyno a manual vs. an auto and that’s a fair comparison????????

@urbexdad3989 Жыл бұрын

Do a 6 speed manual 5.0 compared to a 6.4 8 speed auto since this is not a good comparison . Or even an auto vs auto

@rileyneufeld7001 Жыл бұрын

You can add roughly 5% due to drivetrain loss of the 10r80 compared to a manual. Not a huge difference since the 10r80 is fairly efficient for an automatic. But that would put the 5.0 ahead of the 6.4 in this comparison

@dedlock658 2 ай бұрын

Lmao dude it's a 6.4 vs a 5.0 slopar is trash he forgot to mention the biggest part of this whole thing Mustang is WAY LIGHTER so hp to weight ratio is big that's why hellcats can't beat NA GTs with a few bolt ons

@speed23ism 2 жыл бұрын

Challenger pulling timing on stock run starting around 4k? Wonder if the stock dyno would have been higher otherwise?

@NationalSpeedInc 2 жыл бұрын

Ah, that's where the intake manifold active runners transition from long to short. The dip can be smoothed out via calibration, but all 6.4L Hemis exhibit this dip.

@xGR1MxREAPERx 2 жыл бұрын

Most tuners , even the top tuners like lund and PBD and bama say you don’t even need a revision when installing long tube headers and that the car will add fuel based on the sensors of you can get rid of exhaust faster etc.. how did you get 50hp by adding headers.. that’s crazy

@NationalSpeedInc 2 жыл бұрын

Although you *can* go without a custom tune, there are clear results with a custom calibration when installing upgrades.

@Texas_Road_Warrior Жыл бұрын

Exactly… that’s what I don’t understand… even the flex fuel tunes don’t change the fueling maps… the ECU just adjusts the fuel trims by itself to make up for the ethanol, and then blends the timing maps based off the theoretical E%… That tells me that the long tubes don’t need a tune… unless maybe you’re able to squeeze a degree or 2 of timing because the engine isn’t as choked up… it’s hard to say…

@MasterCarguy44-pk2dq Жыл бұрын

Folks, aftermarket CAI's have been mythbusted in 28 countries on 3 continents. After market CAI upgrades miggt, MIGHT add a few hp but otherwise dont do a damn thing. However a dyno graph can be manipulated to show gains. The air comung in the intake is also not COLD its a few degrees cooler, if not a few degrees warmer. Unless theres a snorkle or scoop sticking 8" in front of the bumper, your not getting cooler air or ram effect.

@rileyneufeld7001 Жыл бұрын

Close the hoods on both cars and you get a real world comparison. Not sure about the dodge but the mustang intake 18-22 is very good and you're going to see a very slight increase (maybe 5-10hp if you're in cold air) in power. The jlt just doesn't have a great way to block off the warm engine bay air so the increase in airflow gets negated by the air being warmer and less dense compared to a closed air box. PMAS has an in fender design which is much better.

@Coyote9smilespergallon Жыл бұрын

Same years but Camaro SS vs Mustang GT,,, I’d say same results

@Tanner_Teves Жыл бұрын

Although the Stang picked up more power compared to the Scat, there is no denying that torque on the 6.4! That's probably why these things lose traction all the damn time 😂. There's no replacement for displacement!

@Shiftnlift Жыл бұрын

Yes there is its called 4 cams😂😂

@captainboose8788 11 ай бұрын

@@Shiftnlift it has 4 cams yet is still down 80ft lbs lmfao

@Shiftnlift 11 ай бұрын

@captainboose8788 and still gaps the dodge lol what does that say..

@captainboose8788 11 ай бұрын

@@Shiftnlift not on a drag strip where tq matters

@Shiftnlift 11 ай бұрын

@captainboose8788 yes it does.. stangs run the strips... u doing all that talkin coyote is the best motor out there. Let's not even throw boost in the equation. That 6.4 goes boom under 7 psi.

@alexander_3923 2 жыл бұрын

How can I make my scatpack respond to mods better like the mustang also what other mods can I do

@NationalSpeedInc 2 жыл бұрын

Every vehicle responds differently to similar modifications, which is why different approaches are necessary. If you're after more from your R/T Scat Pack., we'd recommend having a look at our Stage-3 package.

@Oliver-ft2fq Жыл бұрын

They’re 2 different engines. The mustang’s DOHC is where the advantage is.

@alexander_3923 Жыл бұрын

@@Oliver-ft2fq is 3rd gen coyote better than lt engine since lt is also pushrod

@Shiftnlift Жыл бұрын

@@alexander_39231 mod you'll get better than my coyote is a cam lol it'll be cheaper and justify horsepower per dollar

@MasterCarguy44-pk2dq Жыл бұрын

And the Hellcat is the GT500 competitor. Dont know why this goon said Didge Chalkenger Super Stock.

@walt669 Жыл бұрын

Mopar baby lets go.

@sergiobetanzos1514 Жыл бұрын

weight 😂😂

@walt669 Жыл бұрын

@@sergiobetanzos1514 big girls aren’t for everyone takes a real man to throw around some weight! MOPAR or no car

@MasterCarguy44-pk2dq Жыл бұрын

And for god sakes Jordan, close the hood of those cars on the dyno.

@MasterCarguy44-pk2dq Жыл бұрын

And Jordan when you read numbers keep it numbers man or did you not make it past 5th grade. 409 hp for the mustang stick is not "four oh nine", thats "four hundred nine" hp or four ZERO nine.

@brianharris1566 Жыл бұрын

Come on, guys. Don't leave out the Camaro. Are you afraid of the results?

@bobbylopez9681 Жыл бұрын

The mustang is also lighter.

@cuzanater2027 Жыл бұрын

I'd like to own the Holy trio Stang, Challenger and Camaro, but I can't 😔😔😔. Since I have a Stang I must hate and talk shit to any and all Chevy and Dodge owners🤷🤷🤷 "It is the way!"

@xGR1MxREAPERx Жыл бұрын

Video is kinda dumb as your comparing a manual to a auto, manuals lose way less Hp through drivetrain. Also the stock dyno for the hemi was a bad pull.. what was the drop off a ledge on Hp and torque at like 4200ish? All the biggest gains are going to be right after that drop as for whatever reason the car power fell off a cliff? No reason a car should have a dyno looking like that unless it detected knock hard or something.. e85 adds 4-5 Hp on a hemi and adds 20 on a mustang and is the most fun kid hands down. Soo much throttle response

@dbarr8261 8 ай бұрын

And the Mustang is lighter. Is lighter. Much lighter and nimble.

@timmoyy806 Жыл бұрын

Gotta realize the mustang is wayy lighter though.

@Oliver-ft2fq Жыл бұрын

The weight didn’t matter in this test. They were dyno testing engines

@bradysmith3024 Жыл бұрын

I figured Ford would choke the mustang.

@MasterCarguy44-pk2dq Жыл бұрын

No such thing as a HEMI after tbe 1970's.

@krislinder7460 Жыл бұрын

in the end the mustang wins, the car itself is lighter and the hemi is designed to destroy itself

@FecalMattur Жыл бұрын

only if you don't know what you're doing. The Hemi is very capable of long life if you don't baby it everywhere or idle it for extended amounts of time. I've owned both the 5.7 and now 6.4 both with over 100k on them and have had not one single problem from either. Worked as a tech for an FCA dealer as well. Their engine issues are far less common than you are lead to believe. Doing the recommended maintenance and oil changes every 3k-3.5 (I do with mine anyway) helps 💯👍

@DemocratsRDemons 6 ай бұрын

Why are Mustang people such salty cancer about MOPAR? Your car is BORING. No one cares about it except you. It turns no heads. It's like seeing a Honda Accord.... dime a dozen and BORING... It must suck to know the "slower" car is much more exciting and cooler to the general public...