Boosted Crate Engine Installed! '31 Ford "Race Truck" Has a New Heart

Рет қаралды 78,056

Күн бұрын

I wasted no time. The new engine is IN, baby! I opted for a 5.0 Aluminator SC with forged internals. This should be fun...
If you want to support the StanceWorks channel and builds, here's the link to the patreon!
/ stanceworks
Be sure to follow StanceWorks on Instagram: @StanceWorks
Follow me personally on Instagram at @mike_stanceworks
Be sure to support our friends at H&R Springs for helping bring this Honda-swapped Ferrari project to life:
www.hrsprings.com
Last but not least, check out the rest of the gang that helps to make this project happen:
www.turtlewax.com
www.nittotire.com
www.rsfuture.com
www.haltech.com
www.garrettmotion.com
www.turbosmart.com
www.vibrantperformance.com
www.rywire.com
Timecodes:
00:00 - Intro
00:19 - I am STOKED! The Engine is IN!
01:00 - Let's Check Out This Engine... The Aluminator 5.0
02:22 - Installing Parts: Coolant Ports and the VMP Supercharger
03:29 - Water Plate and Crossover Ports
04:40 - CUTTING the Timing Cover
05:18 - I Lost My Engine Mounts
07:25 - Lifting the Engine for the Clutch
08:39 - Under the Cowl... Electronics!
09:44 - Let's Drop the Engine In
10:54 - SUCCESS!
11:39 - The Engine Looks Fantastic In There...
11:59 - We're Going Haltech
12:40 - I'm Getting New Wheels... Rotiforms!
13:20 - I Messed Up... Don't Use Brake Clean for Welds
15:13 - Outro

Пікірлер: 223

@JoshTHankins 2 жыл бұрын

Tons of respect for addressing the brake cleaner. Wish all KZfaq builds would be this way

@ivanamaya2938 2 жыл бұрын

It's crazy, a lot of terrible dangerous habits are out there on KZfaq. You can tell when someone has respect for what they do when they respect their own safety like they would a strangers safety. Hands down my favorite channel since I started watching.

@JoshTHankins 2 жыл бұрын

@@ivanamaya2938 I agree 100%, that’s why his builds are top notch.

@DEBOSSGARAGE 2 жыл бұрын

Remember seeing this truck in person in 2019. So much better in real life. Glad you are getting it sorted

@stanceworks 2 жыл бұрын

Thanks a ton!

@rdp316 2 жыл бұрын

Lol, hiding parts in the tires and then forgetting about is extremely relatable

@mudflap135 2 жыл бұрын

why doesnt this mans have more subcribers..... his build quility is so much higher than every other youtuber.

@dannymccarty344 2 жыл бұрын

He may not have many subs. But, the chick's really dig him. I put a jet engine in my Mustang last spring, and the chicks really dig me too.

@jacobkmiller 2 жыл бұрын

The mounts were probably like "that goofballs looking for us, should we say something?"

@foamdataservices 2 жыл бұрын

The looking for engine mounts situation made me laugh, that happens to me all the time. It drives my son nuts, he gets roped in to look for stupidly placed stuff whilst I keep working. Keep only a small marked pot of acetone for cleaning, welding and drums of solvents is a big fire risk. The coach company in town had their workshop burn down because a weld spatter ignited some waste thinners. Fire in a commercial body shop is really scary. Everyone got out safe but it made a big mess.

@monkeybarmonkeyman 2 жыл бұрын

It takes tremendous personal effort to follow the rules every single time. You are absolutely correct; separate and secure all such flammables, every. single. time. "If only I had" just doesn't make things all better after the fact.

@madstudiotoo5288 2 жыл бұрын

This has easily become my favourite channel. Authentic, creative, and down right impressive. Kudo's for calling yourself out on camera too. I really hope the new wheels are as meaty as the current set. The rubber mass on all 4 corners is just stunning for me.

@stanceworks 2 жыл бұрын

The meat ain't goin nowhere, baby

@harrison4053 2 жыл бұрын

Wow. Hard to imagine a more enjoyable build than the ferrari but wow. Love this build so much, the detail and perfection in every detail is insane, loving the dedication and not compromising for anything. Good on you Mike !

@JacksonODJ 2 жыл бұрын

Congrats on getting the engine in the truck, and respect for addressing the brake clean comments.

@brianshorey 2 жыл бұрын

I've been subscribed and following you mainly for the Ferrari build, but have been enjoying the non-Italian car content as well. Skilled fabrication is skilled fabrication. Just wanted to say kudos to you regarding the brake cleaner/welding thing. I love that you interact with your audience, and I love that you gracefully receive input, address it, etc etc. Keep up the great work!

@howey1975 2 жыл бұрын

I've just stumbled across this, now subscribed. Will go back through your past videos. I'm really impressed that you owned your mistake with the brake clean, and highlighted it for all to learn from, rather than hiding it. Well done.

@wldwst22 2 жыл бұрын

I knew instantly where your engine mount arms were, because that is 100% something I would do. Thanks for the lesson on brake clean and welding. I just bought a welder and had never heard that.

@dannymccarty344 2 жыл бұрын

I thought they were in the house. But he's got locked out. . I put a jet engine in my Mustang last spring, and the chicks really dig me.

@ericjohnson2335 2 жыл бұрын

Props for talking about the brake cleaner and welding. Stand tall.

@janmartens7954 2 жыл бұрын

I had really to laugh out loud when I heated where the motormounts a put away. That is exactly the thing I have multiple times a year!! Hahahaha

@seekdiscomfort4746 2 жыл бұрын

Really appreciate the accountability on the break cleaner brother 👍 👌 it's good to know we trust you after that lil spiel. We're human. We mess up. Rock on bro ❤

@nitrousshovelhead 4 ай бұрын

the brake clean issue is important beyond words. first day of welding school. thank you

@Tex777_ 2 жыл бұрын

Glad you are willing to lead by example! It's too difficult for most people to swallow their ego. And with the engine mounts... happens to everyone at some point. I was half expecting you to say they were on the frame the whole time LOL. At least the several hours you spent looking for them is less time than you would have spent remaking them. 👍

@zacharymount2492 2 жыл бұрын

Wasn't aware of the brake cleaner problem but I really appreciate you addressing it. My respect goes out to you

@Billy_Wilkins 2 жыл бұрын

Dude the last 2 minutes of this video earned u another subscriber, the fact that u called out ur mistake the way u did........mad respect, brother. Just found ur channel and this truck and can't wait to see more, thank u for letting us see how it all goes down!

@ZeGermanHam 2 жыл бұрын

Love this car (and channel). As someone who plays with and builds cars but works professionally in pulmonology, I'd be remiss if I didn't say that a respirator should always be worn when welding. The smoke created from welding is essentially vaporized metal, and it gets deep into your lungs and causes serious damage to them.

@nottherealjk 2 жыл бұрын

Love the quality you're putting into everything! I'm always impressed by your level of detail, dedication, and fabrication despite your relatively small scale operations. That model A is such a bad ass hot/rat rod. Also, on behalf of the people who said something about the brake cleaner, I'm incredibly impressed with your response and reaction. I think that it would be all too easy for you to not address it, or even to say that you know what you're doing and just move on. It shows a lot of your character and I applaud your ethic! It's also an example along with the times that you've shown mistakes on the channel that you don't brush anything under the rug for the sake of appearances. P.s. Any word on swag for the channel? Would love to support you by buying some merch or something.

@dannymccarty344 2 жыл бұрын

I was impressed too. This guy inspired me my whole life. I put a jet engine in my Mustang last spring, and the chicks really dig me.

@GrindhousePerformance 2 жыл бұрын

I 100% would've stuck half the parts inside the tires and completely forgotten about them. So stoked seeing this thing coming together again!

@Slowtreme 2 жыл бұрын

I can't imagine giving up the wheels on that build for anything else. The new rotiforms must be cracked out.

@timmmy 2 жыл бұрын

Bravo for responding to the Brakekleen comments in such a professional way. keep up the amazing work and thanks for the great documentation. Ps. LOOOOVE the model A

@N037O 2 жыл бұрын

Is the Black Ferrari 308 in the background the next project?

@agonzo626 2 жыл бұрын

Saw that too lol

@stanceworks 2 жыл бұрын

Nope, you’ll see it in a episode soon though. It belongs to a friend

@coyoteslugger3936 2 жыл бұрын

My goodness 😳, you sure this motor didn't come out of a midwest tractor pulling event. Can't wait, it's going to be Epic!!!

@StanleyKubick1 2 жыл бұрын

everything you put out is gold. appreciate the warning at the end.

@alman6581 2 жыл бұрын

You know when you are sometimes work out meet then at a meet somewhere you get to know a lot about them. Michael...... Love you work and frankness. You're of person I usually enjoy working with on projects and hope to continue doing so. Keep up the great vlogs - great projects and skill

@Fordman7575 2 жыл бұрын

Your Model A is a Beast! I love that truck. I really like seeing Coyote powered builds! You did an amazing job on that build. Glad to see it getting it's heart back in it.

@85film71 2 жыл бұрын

It’s crazy you had to make a PSA about the brake clean. I’d stop reading these comments if I was you and we don’t need to know that you torqued things we don’t see on camera. You’re a professional keep doing your thing man.

@rockypergin2216 2 жыл бұрын

I’m sure you’ve heard it 100 times already, but that truck looks bad ass! Super cool

@Pstaines439 2 жыл бұрын

One of my favourite things about your videos is your honesty and admitting to mistakes. Nice one Mike

@garrettlowell7637 2 жыл бұрын

The hidden engine mounts really hit home-been there too many times, and your inclusion of these types of details are why so many are huge fans-definitely relatable. Great job with the A.

@TylerHara 2 жыл бұрын

Big flex installing that flywheel as if blue Loctite doesn’t cost $35 a bottle. 🤣

@RogueViirus12 2 жыл бұрын

Any build videos from Mike are good videos. Can't wait to hear this thing fire up with the new engine!

@seekdiscomfort4746 2 жыл бұрын

Pure resilience babyyyyyy 🔥 🔥 🔥 green 🤑

@robertjordan9075 2 жыл бұрын

Looking forward to seeing the completion of the car.

@gsh3159 2 жыл бұрын

Dont keep that drum of acetone too close to the welding bench 🔥🔥

@Helstrong 2 жыл бұрын

Love the imagination/thought that goes into creating a unique vehicle such as this one. Really enjoy the content, bro, keep it up!

@oldschool1993 2 жыл бұрын

Brake clean is also explosive- I found out the hard way when welding on a motor in place- used brake clean to clean away the oil on the surface and when I struck the arc an explosion blew me on my butt. The brake clean vapors had built up in the pan and went off like a bomb- it actually blew the front seal out of the timing cover.

@marty922 2 жыл бұрын

Absolutely love that truck. What a beast.

@bryan_turner 2 жыл бұрын

I'm stoked to see new wheels on this thing. They were the only thing about it that I didn't really like. Although finding out where they came from did make them pretty rad either way.

@Jin-Hu 2 жыл бұрын

I see that black 308 lurking :)

@jamest5149 2 жыл бұрын

Glad you talked about the brake cleaner and welding. 👍

@atragerlspezi9500 2 жыл бұрын

I have to say I really appreciate the effort you put in to structure your videos

@sprintermaximus 2 жыл бұрын

Loving it man. Looking forward to the end results of both projects I have been following. By the way, we all get lazy at times. But the modesty about it is respectable.

@65Red 2 жыл бұрын

I think it's important to note regarding that coolant crossover on the back of the heads, the heat causing issues (which that crossover was made to correct) only seems to be noticeable in drag situations where a car may make a run and then sit idling afterwards waiting for the next run. This is mostly coming from forum guys that have noted excessive CHT in staging after multiple back-to-back runs, which has resulted in wear issues in the back 2 cylinders. As far as guys pushing the engine on the track or other situations where the car isn't seeing much idle time at all, it's practically a nonissue. Most track guys will take a cooldown lap around the pits just to be extra sure.

@stanceworks 2 жыл бұрын

Good to know! Appreciated

@73Bugman 2 жыл бұрын

Really enjoy your builds. Always clean and tight. Excellent job 👏

@yobosy2352 2 жыл бұрын

Awesome build. Love the content.

@davidsolloway9349 2 жыл бұрын

What wonderful builds. Well done!

@Sleepy_Otter 2 жыл бұрын

Thanks for the knowledge!

@adamreynolds1851 2 жыл бұрын

Way to take ownership ,that one thing got me to sub ....the truck is a sick bonus!!

@SRobison1931 2 жыл бұрын

Always loved this build. I'm glad you stuck with a Coyote....I was nervous 😁

@diebadgerdie 2 жыл бұрын

Man, put some protection on your engine when using chains. Bits of old floor mats would do. Other than that, excellent content!!

@MrLundefaret 2 жыл бұрын

Insane! Equally insane as the centre bolt design you did for the CRF Porsche :)

@xN1NJ4smurfx 2 жыл бұрын

Appreciate the humility and integrity 😎 Awesome ep as always, can't wait to hear this thing fire up!

@danijuggernaut 2 жыл бұрын

Mike you are crazy !!! I like your stuff !!! Greetings from Spain.

@crazymtbrider 2 жыл бұрын

Sweet ride that's got a really nice stance

@adrianandrews7424 2 жыл бұрын

Nice work bro looking forward to those rotaform rims and the burnout.

@NapFloridian 2 жыл бұрын

Looks sick... Absolut stunning build

@rvae3483 2 жыл бұрын

I'm so happy for you, my friend!

@Kr8zyVids 2 жыл бұрын

Keep up the great content!!!

@TeamLovetap 2 жыл бұрын

Killing it man! Love your work and motivation 🙌🏻🙏🏻

@vinnyl.6047 2 жыл бұрын

that is a gangster torque wrench. oh, and a sweet ass truck too. keep it up dude

@domenicaldi3957 2 жыл бұрын

Looking good

@garyjacques6139 2 жыл бұрын

Man wish I was there to help this guy.

@pkt1213 2 жыл бұрын

Steps for installing new engine. ✔ Remove most of the parts. ✔ Grab a cut off wheel and start going to town. Such a sick motor and truck.

@robertnightster 2 жыл бұрын

That's a bad ass build

@gregrisley1050 2 жыл бұрын

I started watching for the Ferrari build (which is awesome) but this build is even cooler. Keep up the great work sir.

@Torch4ya 2 жыл бұрын

I had no idea about brake cleaner and welding being a no-no. Being a big fan of brake cleaner and a with a new mig on hand, I appreciate that info.

@bighomieJ5X 2 жыл бұрын

This car is hella sick💯👍🏾

@michaelarchambeau8905 2 жыл бұрын

Best automotive channel in the game right now

@mchristr 2 жыл бұрын

Glad you got the truck back together. The N/A Aluminator would have been plenty for me.

@pete1973x 2 жыл бұрын

Great vid on all levels Mike, keep it up mate ;-)

@danielm8068 2 жыл бұрын

What a beauty!

@stuartraffle7148 2 жыл бұрын

Another mindblowing build Mike. I can't wait to see what Rotiform create for you. What's the story with the black 308, are you collecting them?! Looking forward to the e36 rebuild and the patina-truck too - do you ever sleep?!

@felipao007i 2 жыл бұрын

another Ferrari in the shop!

@theelcamino105 2 жыл бұрын

That would be me with those engine mounts lol. I'm the type of person that says hey I gotta call you back j can't find my phone

@mikehatch2114 2 жыл бұрын

7:58 Notice the puddle oozing away...lol

@_JCBSLMN 2 жыл бұрын

dude so stoked you are getting new wheels, race wheels are sick but don't do this build justice. Rotiforms will make this next fkn level

@thedownshiftchannel 2 жыл бұрын

Love this thing its wild

@woznaldo 2 жыл бұрын

Bucket list project!!! I really want to do a Model A with full double A-Arm suspension to terrorise track day goers!

@leighharron 2 жыл бұрын

So much motor!!

@4Kandlez 2 жыл бұрын

It's always the way, put something in a "safe" place and your memory auto deletes

@tomwagemans1872 2 жыл бұрын

Now you're going to get the comments that is dangerous to have a drum off aceton near a welder. Just kidding. Love the content on the model A.

@SebastienAudeon 2 жыл бұрын

People sleeping on this build! The Model A is definitely going to be scary once everything is setup, going Haltech means a lot more tuning opportunities!

@mooosestang Жыл бұрын

Dude! Wear a mask when cutting aluminum with a cutoff wheel. At least a n95. That rear coolant crossover is slick AF!

@garnetheron4885 2 жыл бұрын

Wicked wicked

@rachelw5971 2 жыл бұрын

Love it.

@joshfazenbaker5691 2 жыл бұрын

TIG welders do love the brake cleaner.

@euroshane 2 жыл бұрын

Dude I love those le ma motegi wheels

@tinaandandrewmcdermott5742 2 жыл бұрын

you're amazing!

@hanablemoore8239 2 жыл бұрын

eh bro always lov your content

@luccadukka 2 жыл бұрын

Awesome

@wbass243 2 жыл бұрын

I feel like you and Rob Dahm would get along. If people ask why? You are both detail oriented and while rob goes super deep into metallurgy and mill spec rotary development. Mike will make control arms 4 timers in a row till hes happy. Also, I just have a feeling that rob being goofy and you being more stoic might just compliment each other. If you ever want to collab on a Rotary powered car afterwards, I bet you guys could create something truly unique. Anyways, I love the ferrari build. Ps rob has a cosworth indy car and you have a nice aesthetic for reverse engineering/ design/ updating things.

@stanceworks 2 жыл бұрын

Thanks! I have a lot of appreciation for Rob’s work. Would love to collab with him someday.

@78Outlaw 2 жыл бұрын

Looking great dude. Running the McLeod RXT in my 78 hill sprint C3 corvette, into a TKO600, so be interested how you get on with clutch bite. 🏴󠁧󠁢󠁳󠁣󠁴󠁿

@Dennis-eh2vx 2 жыл бұрын

Although I still prefer the 308 build cause I am not that into hot rods (I am from holland were you don’t see American cars very often, let alone hot rods) and certainly not the ones before the 50’s I must admit that this one lookes really sick man! And with those meaty front tires, I do dig that style!