2nd Gen Dodge Ram 1500 HEMI Engine Swap 94-01

Рет қаралды 45,821

Жыл бұрын

2nd Gen Dodge Ram 1500 HEMI Engine Swap 94-01 we remove the 5.9l v8 magnum 360 engine and replace it with a gen lll hemi 5.7L engine from the 4th gen RAM1500 pickup truck but this will be the same engine swap if you have a 5.2l v8 magnum 318 motor in your 1994 to 2001 ram 1500 pickup truck 2wd rear wheel drive trucks to get it swapped with the old engine removed and the new engine removal and install
#dodge #mopar #hemi #trucks
Click HERE for the same engine mounts we modified in this video
www.holley.com/products/engin...

Пікірлер: 214

@christophermcleary8091 Жыл бұрын

Who else thinks he can make a business with something like this. Gen 3 Hemi swapping these trucks

@martinp.cadillackid3408 Жыл бұрын

Absolutely right I discuss with him and he may lean to that decision by himself one day soon.

@DarkElite420 Жыл бұрын

100% can't wait to see everything fully worked out so I can attempt this on my 2001 dodge ram 2500 4x4 crew cab shortbox. Wish your were doing the 4x4 version with the gen 3 hemi and tranny with transfer case so we could follow along but this is a great start and you got me pumped up for this build. Good Job brother

@johnneeley7599 Жыл бұрын

I think he does it for a living all ready

@aurekcollins4557 Жыл бұрын

I want to do this to my 1998 Dodge Durango

@khrisshultz2532 Жыл бұрын

Gen 3 hemis are Garbage, the magnum motor just needs more aftermarket support

@ricardodelacruz4306 Жыл бұрын

The swap I’ve always wanted to see! Hell yeah🤘🏼

@BoostedMotorsports Жыл бұрын

💪💪💪

@Ticncae Жыл бұрын

@@BoostedMotorsports Yayyy lets go I wanna do this to mine lol

@Burnout300z Жыл бұрын

I have a white/blue SS/T right now with the engine out seriously interested in swapping in a 392

@holvinrumblebee9607 Жыл бұрын

This was right on time, Im doing a Hemi swap on a 1998, I learned a lot.

@68Peeler Жыл бұрын

The KING of Mopar swaps !! Good job !!

@geoffdowney9295 Жыл бұрын

Definitely need to do the swap into a 2nd gen Ram 4x4

@lilish6 Жыл бұрын

You definitely would make a killing selling 94-01 motor mounts. I’m ready to bring 94 Ram back to life

@Trans4max Жыл бұрын

Prefect video. Very helpful and awesome to see a solution to get the hemi in relatively easy.

@357RedG Жыл бұрын

1 of my favorite garages on KZfaq. Keep up the grind

@Ramzilla14 Жыл бұрын

An 8 speed swap video would be dope since there's none anywhere. Looking forward to seeing the 727 too

@williambennett5557 Жыл бұрын

DEFINITELY interested in that as well.

@tgtshirts1 Жыл бұрын

Enjoy the video. love the modification you do. Thumbs UP!!

@trevoroudekerk2599 Жыл бұрын

100% would buy these mounts

@davidmacy3458 Жыл бұрын

Definitely interested in the mounts. Really interested in this build, looking foreword to future videos.

@antoniohuertas8909 Жыл бұрын

Niiiiiice! It's about time you get to work on that! I was starting to think you didn't get it. Already looking forward to the next video 🤘🏽👍🏽

@digitalgavakie Жыл бұрын

This is so awesome. Just picked up a second gen Ram. If only I had the skills haha. Love the channel man.

@henryg683 Жыл бұрын

The SST made it into the inner sanctum!!!! Can’t wait to see the progress on this truck should prove to be very interesting!!!!

@joaquincerda9897 Жыл бұрын

Hell yes,I love the 2nd gen rams and can't wait to see how this turns out

@winstonemerson2439 Жыл бұрын

You are the man!Love these videos.

@joshfowler197 10 ай бұрын

I'm so glad I stumbled across your videos. I own a 97 sst as well and have a 5.7 hemi sitting in my garage

@BoostedMotorsports 10 ай бұрын

Welcome aboard!

@mauriceborunda-reyes3478 Жыл бұрын

Just got a new subscriber. This is exactly what I want to do with my 97!

@Killsquaddrizzylx Жыл бұрын

Aww now I remember you now with the hellcat swap I gotta subscribe man I remember when you was working on that dakota lol hell yea!💪🏾💪🏾

@MM_in_Havasu Жыл бұрын

Alright! New build time? Cool!

@theratedrtransformer8890 Жыл бұрын

Glad someone is finally doing these,i have 2 second gens,2 door extended cab,ive been debating on re building the engine or putting a hemi in it

@miguellinksup7897 Жыл бұрын

Definitely want the engine mounts!!

@joeweikle6737 Жыл бұрын

Damn good job looking forward to seeing it dune

@pagefamily8245 Жыл бұрын

What I love about your channel is you have all the mopars that were collectors to me the srts the RTS the ssts every vehicle that you have is either a monument for Mopar or is a to me in my eyes is a collector's item because there's not very many of them dude you have an awesome collection I love it man I dream of having what you have literally them vehicles are the same ones that I really want I talk about them all the time to my wife and my son one day one day

@raytrujillo6828 Жыл бұрын

Great content John keep it comin,

@blackpearl0285 Жыл бұрын

I would definitely be interested in the mounts. Thought about doing this to my truck already.

@terryweedon8431 Жыл бұрын

Am I the only one that thinks he should swap the Viper V10s, then put the 2nd gen viper motor in the SST with the 8speed transmission? Lol

@chadparsons1972 Жыл бұрын

The v10 would have been a better choice then that crap hemi

@howoods Жыл бұрын

Yes on the mounts for sure.

@benjaminvandiver3206 Жыл бұрын

I am looking in to do that same swap on my 01 scsb and wish there was more support for this swap in second gens. I would 100% buy them if they were available.

@Joshua8525 Жыл бұрын

That TorqueFlight will be amazing behind that Hemi if you keep it in there. It’s a perfect drag racing transmission and they’re strong. I had one in my 75 Dodge D150 with a shift kit and the shifts were so firm. And it held gear without any convwrns of slipping.

@brendenperry3770 8 ай бұрын

Same thing with the transmission that came factory in the 94-01/02s, you build them a little and they’re some of the best transmissions out there.

@Davusbanuelos Жыл бұрын

Ive got my 96 ram sport and would love to do this same swap but with a manual transmission, i also would love to work on these kind of swaps for a buisness im all excited to see this all the way!! Keep it up!!!

@jacobboggess4167 Жыл бұрын

Yes please let’s get some mounts made!!

@christiancortez5950 Жыл бұрын

I would love one got a 2001 Ram 1500 with a 3.9L V6 and been looking into doing a swap can't wait to see how it comes out so I can do the same on my truck

@richardjenkins6081 11 ай бұрын

Definitely may need those mounts if I end up doing the swap in a 98 Laramie slt 4x4 swb reg cab. Had the 5.2 now

@lylereinier4989 Жыл бұрын

Outstanding

@gavm360LVL Жыл бұрын

yes on the mounts!

@tonysajkowski3534 Жыл бұрын

This is great stuff the electrical is what would stress me good info

@claymillican25 Жыл бұрын

I like it !!!

@BoostedMotorsports Жыл бұрын

Thanks Clay! So much room for activities in this bay! 😂

@MrThunderhaze007 Жыл бұрын

Yes i would definitely like to purchase a pair..

@DarrensTruckzs Жыл бұрын

I think we should start calling john “the HeMi Whisperer “ What do ya all think lol.. an I would cut it jus the same as you did john.. its what makes the most sense .. 99.9 % sure no one will ever want to put a 5.9 back in .. i wouldn’t after having a nice 5.7 in it.. you did the right thing bro 👍💯an it looks factory like again like you always make them look lol .. im lookin forward to seeing how it works an drives with the big 727 trans .. really excited for this build bro 💯👍

@jerememcmahan3756 Жыл бұрын

Yes I need a set of those mounts for a 2000 dodge 2500 4x4

@Pitman556 Жыл бұрын

With the trans or would you use the original 2nd gen transmission?

@Izywithdagrinch Жыл бұрын

Can’t wait to see what all has to go down I’d buy a whole kit to if you made them lol

@johnsmith-qz4bv Жыл бұрын

nice work looking good i dont need the mounts but it would be awesome if they were avalible for purchese..

@2ndgenlife324 Жыл бұрын

Yes on the mounts I'll take the first ones

@ChamuKING95 Жыл бұрын

You living the dream

@mac2708 Жыл бұрын

Yeah buddy the shop looks complete with the John Deere rider in there haha👌🏁

@BoostedMotorsports Жыл бұрын

I knew it was missing something! 🤣

@alexdelacruz6241 Жыл бұрын

ohh yesss 🔥

@jameseverett7634 Жыл бұрын

Please hurry and get these mounts on the market!

@Pitman556 Жыл бұрын

Did they say a estimate? I seen a bolt on 4th gen 5.7 run 11.9 would be wicked in a older truck

@randalljustice5548 Жыл бұрын

like it!! would like the mounts. following

@billyreece4445 11 ай бұрын

Definitely would be interested in the mounts. I been thinking this would be a good upgrade for my 01

@joellasierra Жыл бұрын

“Dont cut the sst what are you doing? Dont cut that thing its weird” had me laughing way too much than it should have

@claytongriggs7527 Жыл бұрын

I've been wanting to do a hemi swap in my 2000 ram sport for some time now but have been busy with other life shit and my other projects. But if it works out I most likely would scoop up a set of mounts. And I got a friend who has a few hemis laying around in wrecked trucks and cars in his towing scrap yard may be able to scoop one pretty cheap too.

@taylorchristensen996 Жыл бұрын

I would definitely be interested in a more detailed description of the modification done to the frame as well as these mounts! I would love to be able to swap in a hemi a tad easier than trying to match power to some degree by stroking out the 360 mag

@otgmedina3452 Жыл бұрын

Agreed

@austin_94gt18 Жыл бұрын

Out here doing God's work.

@williambennett5557 Жыл бұрын

I have my daily driver, a '98 Ram 4wd that I am planning on pulling off the road soon for a Hemi swap. I would definitely take a set of mounts. Also interested on how that 8spd fits and what mount work is needed there.

@nickyadadi Жыл бұрын

Same here! Let’s get those mounts going!!

@garymcnemar6620 Жыл бұрын

I think that it'd be awesome to provide those mounts, for purchase! I'm sure your subscribers would appreciate it, for future upgrades.

@BoostedMotorsports Жыл бұрын

Thanks Gary! 💪

@ericdeiblerdc6976 Жыл бұрын

I definitely want a set of mounts. I want to do a 392 in my 99 regular cab sb

@mikeboersma1915 Жыл бұрын

I was having the same problem with my 1998 Gen 2 when I put my 2004 SRT10 Viper engine the driver side was the problem for the headers. Best of luck but custom brackets are the way to go.

@nickcarnes6194 Жыл бұрын

I have a 96 Indy 500 truck. I would love a set of the mounts. Planning on hemi swapping it once my Magnum is complete

@lowboostedaccord4933 Жыл бұрын

I would like to see some motor mounts for a third gen ram to fit hellcat swapped I'm pretty sure you would know all about that lmk and keep up the great work bro 💯👌

@kelstovall7523 7 ай бұрын

That’s my dream, I have a 96 that my grandma pa bought new and sold to me for blue book in 06’. I have a modern 5.7 engine and trans and want to swap it… so I’m real curious as to how all this will work out for you. Great video!!!

@jorgeloya1828 Жыл бұрын

I love your videos I have a 2014 Dodge Ram 5.7 and I love it what spark plugs do you recommend me for it ?

@cenewman007 Жыл бұрын

I'm planning on swapping in a 3rd Gen into my 98, and would love to buy those mounts!

@gunsandhorsepower Жыл бұрын

Finally cause i have a 2nd gen sport 4x4 off-road edition and a hemi would be nice i wish someone did a 4x4 swap as well caise i whana now how to use a transmission alomg with a transfer casr

@DarkElite420 Жыл бұрын

I agree 👍 I have a 2001 dodge ram 2500 4x4 and would like to throw a gen 3 with tranny In my truck. I would buy the mounts for the swap. Love the vids keep up the good work

@boosted_red8294 Жыл бұрын

I'm waiting too because I have an 03 QC SLT I'd love to swap a 5.7 6.4 or HC!!!

@williambennett5557 Жыл бұрын

In the same boat. Would love to keep the 8spd and figure out the transfer case situation.

@austinelmgreen9338 Жыл бұрын

I've been wanting to do this to my second gen. Will definitely be following

@pagefamily8245 Жыл бұрын

My first truck when I was in 9th grade was a Dodge ram SST a 98 white with the Pepsi blue stripes I had it lowered cow ram Air hood 360 5.9 big block with headers lifters cam long to betters to the 40 series flows with 3-in tips coming out the passenger side and shoot a 3-ft flame and then I had it on American eagle five star deep dish 16 x12 and 1/2 with Cooper Cobra white wall tires with three virtual tech Hammer tens in it chameleon CD player and God was is she a beast

@user-ld4ro7bw6k 5 ай бұрын

I have a 98 1500 single cab 2 wheel drive Ram been in a fire and throttle body etc was melted off top of motor. was only a 5.2 magnum and I have purchased a 2005 5.7 Hemi and trans out of a C300 car. I would be keen on a set of your mounts and then I can sort out the trans mount. any other info you can offer on this repower would be appreciated. I have been looking on net for while but most info is for repowering Dakotas this is the first most helpful site I have found great work.

@DMACHOLMAN Жыл бұрын

I know you've had issues with the 8spd transmission in the 4th Gen Rams but I'd like to see what steps you would take to overcome them and what aftermarket vendor's you would recommend for the third party computer to run the trans in a second gen.

@wayneruger Жыл бұрын

I have a 2007 ram TRX short bed single cab 5.7 hemi was this truck a rare one to

@derrickswiler7290 Жыл бұрын

Thanks for test fitting that for me. I've got a hemi sitting here. What did you do special to mate the 727 to the hemi? Can a 46re be used?

@slim56 Жыл бұрын

If I still had my old 96 Ram with 318 5 speed. I would have definitely done a hemi swap.

@billhacker5189 Жыл бұрын

if you pull the radiator supports and front bumper would make it easy

@evodennis75 Жыл бұрын

Is the 6.4 intake a worthy upgrade, maybe coupled with the bigger tb?

@GLHS592 Жыл бұрын

I've been looking around for a nice 2nd generation Ram regular cab shortbed for a Hemi swap. I ain't cutting up my SS/T. 😉

@MrThunderhaze007 Жыл бұрын

Hey did you paint the car lift it looks great! Also as for the gen 3 hemi swap do you think this would work for a 03 dodge durango?

@mikegreer9041 Жыл бұрын

Needs a comma in the title. I was looking for a 2nd gen hemi. Lol

@BoostedMotorsports Жыл бұрын

😂

@Selfmade_Jose Жыл бұрын

I have a 96 ram 1500 v6 that I would love to do a hemi swap too. It has sentimental value so I would love to get this upgrade going. Will this same swap and these same mounts work for me as well? It’s also a 2wd I would like to also convert it to a 4wd if that’s possible.

@rafaelfelix8770 Жыл бұрын

Bravo John! I’m sitting in my garage looking at my SS/T and making her a bit nervous after watching this vid…😬 I assume the modified mounts would work on a 6.4 and 6.2 Hemi?

@desrotiny9066 Жыл бұрын

Are you going to weld and make a road edge on the motor mount you trimmed ? Because when you cut the road edge off you took some strength out of the mount

@kevintibbits8993 Жыл бұрын

Looking good can’t wait to see the wiring. Also did the 727 just bolt right on? Just curious? Cause if that’s the case then wouldn’t a 6spd or 8spd trans bolt up to a 5.9 magnum?

@BoostedMotorsports Жыл бұрын

Sure would!

@southernoutlaw93 Жыл бұрын

19:51 looks like changing the back spark plugs on the driver side would be a pain because the brake booster is in the way

@paulhedges8421 4 ай бұрын

What did you use for engine mounts and trans. I am in the process of doing the same swap

@nelsonbardsley3535 Жыл бұрын

Are you going to put rack and pinion steering in this build?

@loringpangborn584 Жыл бұрын

Yes build a kit for the 2nd gen.

@brewaire Жыл бұрын

This chat has a weird accent 🤣 One suggestion would be use all 6.4 stuff. Intake manifold, cam, possibly heads, 6.4 exhaust manifolds.

@feeling_lucky_4560 7 ай бұрын

This has inspired me my dad passed in march i gpt his old 98 ram single cab 6ft bed he bought brand new when i was 11 i plan on doing the 5.7 swap will your motor mounts work on it cause its a v6 not a v8 i appreciate any input

@talyncampbell2855 10 ай бұрын

im about to hemi swap my 2500 truck i have a sst that may get after the saftey thanks for the details

@texasgod2794 Жыл бұрын

id be a customer if these were for sale for sure

@fullyotto31 Жыл бұрын

I want to hemi swap a B3500 van. Hopefully, the mounts get made. I assume it would be roughly the same chassis side mounts even though the van is a 1 ton chassis with a 5.9 magnum.

@billyingram5394 Жыл бұрын

Hey man I have a 2004 Dakota crew cab and I just got my new headlights in and they have day time running lights on them. So my question to you is where did you splice these wires into on your Dakota to get them to work please?

@emilycordes2332 Жыл бұрын

Need more knowledge pls do more

@ZCE-bp8pl Жыл бұрын

I need these mounts for my 98 SS/T. Do you think there's any chance of running the Dakota longtubes? Or any other longtube headers?

@CarsTrucksWhatever Жыл бұрын

Sweet are you going to run it stand alone just to get going also are you keeping the internet stock

@ADLovelace Жыл бұрын

I’m buying my Granddads 98 1500 that he’s had since brand new. I remember it coming home when I was 10 now 25 yrs later it’s mine and this is exactly what I want to do. It currently has the v8 magnum motor but mannn would I would doing a Hemi swap. Anywhere to get a full breakdown on what’s needed? Is it easier to buy a parts truck and take things off of that?

@pagefamily8245 Жыл бұрын

As soon as I seen your video and seen it it made me think about back in the day wondering where did you get that truck from by any chance did you get it from Georgia or do you know where it came from did it come from Georgia

@CodyHoggatt-lk2ev Жыл бұрын

Will those mounts also work for a 04 hemi swap? It it generally the same as a gen3?

@kurtsoileau3156 9 ай бұрын

I need info on these engine mounts. Doing a 6.2 hellcat in my 1997 ram.

@burningokane6320 Жыл бұрын

Just picked up a 2nd gen and thinking about this swap. What all you recon I’ll need for this?

@Killsquaddrizzylx Жыл бұрын

So your dakota has the truck 5.7 hemi in it? I been browsing the web too see if could do that cause I want too do that swap....I'm about too check your page out an see if you have the information I'm looking for and if not..could you give some input on how too go about it? I have a 2000 dodge dakota 2.5l manual but I wanna do a whole hemi swap and trans with a automatic floor shifter

@donaldpowers5557 Жыл бұрын

Y The 46rh trans is controlled by 3 wire plug the center is hot the other two go to grounds thru a toggle switch arm the center fused the when you want to while driving shift in to OD THEN lock up.. bets the 727. Then you can run deeper gears. My 96 Reg cab short bet ran a best 14.4 at 95. With 5.9 on 3:90 gears