אהבתי אתה העבודה שלך.אתם צוות משפחה לעניין💖💖💖💖🌷🌷🌷👍👍👍🙏🙏🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱💪💪💪💪💪

Thanks for the window washing BJ.

The guys over at North Star are great.

I think i am beginning a huge Gleaner fan!!!!! love your honest talk/opion on stuff. You can not get that from Deere guy's

Thank you for helping feed us!

Finger food a must in the field. Especially grain cart driver. And you need to run both combines together in order to attempt to keep up

Thank You BJ!!!!! Looking good....

Thanks Brian! 👍👍

Thanks Brown Family! Nice job on the windows BJ!

Great content guys,good to see BJ doing his thing👍👍

Really enjoying the commentary from BJ.

Good comparison. Thanks

I like how y’all do it I love John deer tractor 🚜

BJ cracked me up with the Depends philosophy! Another good one Brown Farm!👍🇺🇸👏

Great Brown Farms Video, thanks for sharing

I did notice the clean windows. Actually it inspired me to clean the inside of windows on my vehicles. On theses frosty mornings it is annoying, so yes BJ, you are an inspiration 😁

BJ stole the show on this one. Thanks for sharing

Thanks for another great video Brian! Love the comparison of the Gleaner and the Lexion. Hopefully Capella can help you with the head.

My 3 yr old loves to quote you by saying, "mornin'" and "power ladder." We are Ohio natives (now living in The Mitten) and enjoy watching your videos as a family. Happy Harvest!

I saw Nathan over on Border View Farms do one of those fast power downs last year and I couldn't believe that didn't hurt anything. That seems crazy!

What is the bushel loss on the cab ? Have a great day.

Brian, thanks for your content!

We put a air blast on top of the cage in corn and went from 1 bu. rotor loss to zero rotor loss. I hope Gleaner will do something on those lines on there NEW Gleaner.

BJ, great job on the windows, made a big difference

Brian, this was the best video you have made. I enjoyed it a lot. I hope to see the Gleaner more. I grew up with John Deere; I am becoming a vast Gleaner fan. Have a safe harvest. I am looking forward to seeing your next video.

Thank you Brian and family for your videos. I appreciate the hard work that goes into making them, so I can live vicariously through them (ex-farmer).

I used to run on 33 it's cool to see it

Go ahead and do the bigger one. You know you need it. Just think how beneficial that hoop barn has been this year. Then, who knows when they are going to build your shop. I hope you can build another soon.

Removed every other wire grate in the concave and solved my problem. I have little to no rotor loss.

You all are awesome 👌. Love watching ya!!😁😊

Yep, BJ... definitely noticed the clean windows. :) Great video, Brian! You were definitely washing the cab in corn... :D :D

Love the video keep up the awesome work 5 ⭐'s hardly wait for the next one God bless y'all from South Carolina viewer

Brian I cant thank you enough for all the content. I know it cant be easy doing all the work and recording it and editing it

Dad sounded like he was speaking in tongues over the mic. I finally figured it out. He sounds like one of those submarine captains. “I think we’re dog free. Balsa gonna reside yer over year gonna rain putem up good yield doe buchwell over under ! “ He’s talking under water. God bless him he’s in the thick of harvest. Pushing BJ to adult pampers. Rock on crew. Only thing better would be George doing a ride along while eating popcorn. 😂👍🏼👍🏼

Thanks for taking us along. And BJ would ya keep up!!🤣🤣

Great awesome video brian

My 4-year-old son and I are excited every time one of your videos pops up! It’s good to see a fellow Ohioan!

Another great video. Keep them coming.

Nice comparison on the two combines👍 Inquiring minds want to know which combine has a bigger cab corn holder?🤣🤣🤣. Thanks for sharing

Thanks for the video, I'm from Akron

Your shout out is awesome. I buy alot of stuff from North Star Implement, great guys to work with.

Hi Brian another great video thanks

Very interesting 🧐🧐🧐good one Brown family 👌🏻keep em comin plz👍

Thanks for cleaning the windows bj! Nice view!!! Nice job, keep up the good work

I know the Deere corn heads have the possibility of three ranges where you swap gears around at the end of the head where the main drive shaft drives the drive shaft going to your row gearboxes. I can't remember for sure but when we had a Cappella head, I think you could do the same thing with it.

You must love the Power Ladder. Nothing works better than a Power Ladder

Great video as always. Cab heat🙌

BJ was on fire in this video!

I really enjoy the content. Hopefully the rain healed out for y’all and your getting everything finished up. I’m not sure how far out video’s are so hopefully your getting close to the end and hopefully we will get some hunting content together and y’all stroke out acouple big ones this year.

Awesome video have a great weekend

Looks like you need to get a big top grain bin extension for the Gleaner

Perfect!

not sure if you noticed but there was some loss .......the cab corn rain amazing stuff :) I used when working on a farm as a teenager new Holland 8050 we had the only option to add and remove sieves to reduce the loss....didnt liek as I had to climb in and do :) lovin the vids be safe from the UK

"This barn's too big" said no farmer ever. Go big, you know you need to.

We have found more head loss than rotor loss with our gleaners and gerinhof heads . We ran a case 9240 as well in corn as a side by side trial and it has more loss but the majority is head loss . We ran most of our corn at high moisture and the losses were slim to none . We are almost finished with corn now we need to finish beans . We are sitting at 1500 acres of beans and 500 acres of corn left. We then will do some custom work for a few farms . I'm ready to be done with harvest this fall has been wet and rainy so it's dragging on. We finished drilling wheat Friday now we are seeding rye and red clover for cover crop. We plan on planting rye and red clover on every acre that we can we seed a yield increase and less weed pressure by using cover crops. Great video keep up the good work !

The BJ commentary is great

Kevin Selhorse....North Star Hardware good dealer they've worked on our gleaner a time or two. Thanks for video really enjoy your channel

Nice work good video brother

Thanks

Going down the POWER LADDER. Yes i need more of that, its your thunder! The hedder problem maby solved by just going faster on the glean machine? Or the angle on it might be different to the claas, by the tire size or pressure in them.

Good vid!

Brian that was a awesome vedio..three thumbs up..

This farming stuff is more complicated than I could have imagined.

Did you check the heavy separator grate on the very bottom of the cage? We have ran gleaners for decades and every one of them would plug up with cobs and you’d start to see rotor loss. Also always have the concave plugging like you saw, no way to get rid of it that we found.

lexion for corn and beans i leave the cylinder in low, the only time high speed is small grains, so the only thing i do going to corn from beans is slow cylinder, open concave and awning plates, pull chopper knives , and open botton sieve all the way. 5 minutes tops. if i had a lot of corn acres i would take bottom sieve out. no need for it in corn, you can use the chaffer to clean up debris.

Happy Birthday Gorge

Good video Brian!!!

Sharing always when I can Brian.

Keep you a brand new jug of windshield washer fluid in your tractor BJ

Adult diapers not something I thought would be mentioned but I choked on my coffee I was laughing so hard you guys are awesome good luck and stay safe

BJ was on fire this video

Bj stressing about 2 combines when I first started running grain cart I had a 4955 powershift with a 600 bu gc for 3 9600s and one 9500.... talk about running my ass off.. they hardly ever had to wait for me..most hours I ever worked also 118

Those honkers are probably after that high protein corn 🌽 coming out of that big green bird feeder 😁 Flintstone

Canadian Cobra’s is what we call them birds in the Prairies. Hope you sort out the Gleaner . It’s always been a good machine long term. 👍🏻

To throw to the right more you may need to change the setting on your spreader paddles

Sending you some Canadian Honkers. Cab Corn, Two Hopper Brian is what I'm thinking.

Thanks for explaining all the woes/tests of getting a harvester dialed in. Makes me know it was a long process to figure out which one to buy. Can't just go by paint color.

evening ! i got bear circles in my corn fields. bears make perfect circles by knocking the corn down, i don't know how they do it its one of those things you are better off not being around when they are doing it, i figure

Raising Cane's! SO GOOD!!!! Why is there so much cob going into the corn and not out the back of the Gleaner?

You need to add some auxiliary hoppers on each side of the cab to catch all the cab corn. Which monitor tells you how much cab loss you have?

You want some honkers Brian? Come to my work, their all ove the parking lot the last few days!

Clean windows ! You are taking farming to new heights !!!!!!

Chet Larson made some changes on his combine that made a difference in the loss you might check with him to see what he did he didn't name the manufacturer. Great video good job on the winders BJ 🍻

Nice One! Im wondering if Brian looses more bushels off the top of his cab than his corn head... 👍

The Lexion will out do the gleaner in wheat if you had a small grain concave and aps grates along with tm6 sieves. The 740 with the c13 cat is a beast. Not sure if yours is the c9 or c13 version. I have a 580r which has the c13. A JD s690 can't hang with the 580r in 60 bu durum or 40 bu green stem canola.

Beautiful corn crop, any combine will lose a bit, as that is a lot to swallow when you are harvesting those kind of bushels. 287 bu instead of 288.4 bu is insignificant as long as you are getting the crop out of the weather!

I ran a combine for the first time this year

If you talk to your salesman or service department they can tell you how set the paddles on the spreader you get it to spread properly we had to change ours every time we buy a new combine

I agree with you on using the gleaner it’s under warranty and if your paying for it why not use it right lol thanks buddy for sharing praying for everyone a safe harvest god bless Ps Bj you just gotta learn where the combine driver likes the cart by watching the auger position 🤣 jk

i think the "cap corn loss" is higher than the header loss ;) :D

Good job with the windows BJ! Lol…. (Edit: go with the bigger hoop barn. You can never have too much barn storage!)

Nice

The video was great you need o r if thick 2000 bushel carts ha ha

Need a cab corn shoot attachment to drop back in header or a barrel/can/sack😃

Will you put doors or curtains on the barn to prevent blowing snow or rain to protect your fertilizer.

How much lose when combine is full and corn comes over the cab. Great video, you have alot to worry about

Bj you did good on them windows

Hey man, cole was talking last year about row sense making a measurable difference in butt shelling. If you’re dad is running feelers and you’re running free hand, that might be part of it.

Those damn geese left canada a long time ago lol. Nothing for them to eat out west. I guess theyre bulking up on corn 🌽 now

Need to call Crary about their Big Top cab corn kit for Gleaners.