The turret looks accurate too

idk for me cobi its just a scam

@@IcePea379 Why is it a scam?

@@thermometer_5944 it has very overpriced shit designs. Like look at brickmania sets, thye have little to deliver, but are very very expensive, here is the same thing but with a lower price

@@IcePea379 Overpriced shit designs? Cobi doesnt have "overpriced" designs. Looks at brickmania sets. A 500 dollar "tiger" tank that is as bis as the minifigure. ???

you mean that you have to remove the inner wheels on each side of the Maus to avoid these inconveniences?

I have this maus and i didn't have to glue anything. its because theese parts where he glued has 2 sides and on one of them work well

@@ironant8042 Thank you for your reply. That would make sense since many Cobi parts seem to be symmetrical but actually aren't which often leads to problems.

My tracks work perfectly, work too on glasses. I juste did little small corrections at 4:26.

This one gets the proportions just right

@@jeanpierreartigas1465 what correction? Can you explain please?

"piece should never have to be glued on" (model tank builders sweating nervously with 3 bottles of loctite and plastic weld)

He is hacking life lol. How his All bricks dont Fall on floor etc. Bruh for me building a cobi car takes even to 3 hour HOW HE CAN BUILD 1000+ BRICKS SO QUICKLY even without ,,speed build" on yt he makes life speed building lol.

Joaodavl

I didn't use glue and tracks work perfectly.

I personally think the Cobi Maus looks more accurate from the outside but I cant decide which interior is better

@@mikahochheuser9062 I think planlos did better interior

I actually bought the Panlos Maus last October since it caught my attention through BrickMeet. I had fun building it, but there were several issues. Obviously there were parts that were too loose or entire sections that would come apart. The side skirts took a little bit to get on cause they were being held together by a single 1x4 piece and would break apart with too much pressure. The interior was great, had almost no issues, except for the turret. The technic 3 hole has less grip to the plate than the connector piece so you often take out that small piece when trying to remove the turret. On to the turret, the design was creative for it all, but the sides of the turret were a pain to attach, and the parts used to hold the barrels were not great in stability. Then the problem with the swivel piece. The interior is great but if too much pressure is put on it while trying to get the turret back on the entire inside breaks and is a pain to fix. The turret is wobbly as well. Then there's issues with other parts like the back where the extended fuel tank is. It comes off easily so you have to be careful with it. The tracks are a clever design and work well, but sometimes the technic circle plates (Im not very good at identifying brick pieces) come off, but aren't really a pain. Issues aside I really like the tank. The detail is nice, the interior looks great for sure, and the tracks are definitely better than Cobi's. I keep the Panlos Maus on my dresser as decoration, and it looks great despite the turret lookin like a shaved down block of cheddar cheese.

Really? Like the same maus with interior?

@@SnipR9 yes

how?!

Das Set kostet 134,99€ ?

Das Balkenkreuz war auf der echten Maus ebenfalls nicht zu finden.

@@raaariz900 Okay das wusste ich nicht. Danke für die info. Ich meinte das auch auf die alte Maus bezogen.

@@Alex851987 Es wäre aber schön gewesen, wenn Cobi Sticker beigelegt hätte. Vielleicht gibt es ja manche die ihren Panzer bekleben wollen.

@@raaariz900 Da gebe ich dir recht, aber bitte keine Sticker wenn dann eher bedruckte extra Teile.

@@Alex851987 Ja, dass wäre natürlich die optimale Lösung.

u get scammed

@@IcePea379 no???????

There's no Porsche Tiger. Maybe I'll do a MOC with rebuilding Henschel to Porsche in a video.

Really exited

Why? You can already buy this from COBI, Panlos, CaDA and others. Why pay twice as much for less pieces with stickers just for reading Lego on the studs?

@@BrickMeet It’s just me being biased honestly. I’ve had off brands such as mega blocks and kreo and just never thought they compared to lego in terms of quality. Though I will admit the models from COBI look pretty good.

Only cobi sells the limited edition

Ich glaube, ich mach noch ein separates Video, in dem ich die beiden ausführlich vergleiche. Immerhin liegen Welten zwischen den Preisen und Panlos ist weltweit verfügbar.

@@BrickMeet das ist ne gute Idee, wie ich finde 👌🏻 😊