briggs and stratton 18hp opposed twin 422437 rebuild part 2

No video

briggs and stratton 18hp opposed twin 422437 rebuild part 2

Рет қаралды 9,419

rescue restore repeat

Жыл бұрын

Пікірлер: 23

@lllmmggg Жыл бұрын

Watch out TARYL dactal you got competition!!

@philliphall5198 Жыл бұрын

It’s all about the fun and joy of doing it and seeing the results 😊😊😊 That’s the best part of being a happy mechanic and person

@johnbrizendine7716 Жыл бұрын

Very awesome!!! one of my favorite series so far!!!!!

@rescuerestorerepeat8500 Жыл бұрын

Thanks

@user-uq1qc6ij2r 12 күн бұрын

Awsome video

@rescuerestorerepeat8500 12 күн бұрын

Thanks

@philliphall5198 11 ай бұрын

Really it’s a very very easy engine to rebuild, it AllWAYS remind me of the VW engine back in the days of fun and cheap parts 😊😊

@philliphall5198 Жыл бұрын

My Dad had the hand valve tool and blk and Decker valve machine. I still use it every day

@philliphall5198 Жыл бұрын

Thank You for information and advice. Going to rebuild one before long if I slow down in shop

@philliphall5198 11 ай бұрын

I spray head gasket with aluminum paint, both sides, been doing it for 60 years on all air cooled engines and flat head engines also Watched my Dad do it at his shop

@jonpaulsen3861 Жыл бұрын

Video length is fine, cuz! Nothin’ to worry about there! Got a 16 twin in the shed to start on soon. This series will be a great reference 👍

@philliphall5198 Жыл бұрын

I’ve used a lot of India head cement

@philliphall5198 Жыл бұрын

It doesn’t matter about how long it takes. Just show it all

@joshburts1044 8 ай бұрын

If this motor is for an off road mower/toy, why would you re-install the governor? Would it also benefit from messing with the timing? Very entertaining and informative video, I also have one of these engines on an old international lawn tractor.

@rescuerestorerepeat8500 8 ай бұрын

This mower is not a off road toy it's a craftsman Indy 500 limited edition they only made about 50 of them so i take it to tractor show's and use it around the farm too

@deborahcuster8142 15 сағат бұрын

question . . . what does it mean when i hear something kind of like a klanking from the top of the engine at the front ? it is a 18hp engine, it is a horizontal engine, like the one you have. i am hearing a klanking sound from the top front of the mower, that is where the electric pto clutch is. . . is the electric clutch bad ? or is it the govenor going bad? , or is the timing gear slot wollowed out a bit for mew to hear that sound?. kool mower by the way. lol always wanted to see one . i see one once on the sears floor in the mall, but could not arrord it. they wanted 10 k for it. not to mention the accories that was available for it at that time, what torque did you put on the bearing cap bolts ? how did you get the valve cap plates off ??? mine is stuck. what torque is the oil pan bolts ?, i think i might need to check them, and snug them up. . . if need be. what torque is the timing plate bolts ? plz do respond, i need to repair it for a friend.

@rescuerestorerepeat8500 14 сағат бұрын

The noise is probably the clutch hitting the bracket that keeps it from spinning it could be the cam bearings but it's probably the clutch the torque on the rods is 110 inch pound's there is not a torque spec for anything else but I go about 50 inch pound's on the timing cover and the oil pan. if you are taking about the valve keepers that hold the springs you will need a valve spring compressor do you want the part number for the valve spring compressor? I can look it up

@waynechayer2624 11 ай бұрын

Hello is there a way to adjust the valves my engine has a hard start thank you

@rescuerestorerepeat8500 11 ай бұрын

The only way to adjust the valves is too grind the end of the valve to open the gap

@philliphall5198 11 ай бұрын

What was the value lash set at on intake and exhaust ??? Other people might need to know lolol

@andmk23 Жыл бұрын

Hi! Where I can text you? I need an advice since I got an opposite 18hp and I can't remember how I should assembly back the intake valve, the order or oil stem spring and retainer.