Just now bought one of these from you, Ken. Loved ones will be nice and warm this Christmas!

I just bought this machine and it is a true work horse. Love love love it

absolutely a wonderful quilting machine....love it. Has the speed for long stitching but also goes slow enough to free motion.

I just purchased this one for my sewing business and I ABSOLUTELY LOVE IT!!!!

Excellent overview. Just purchased a DZ1500F, similar machine.

Thank goodness, I found this tutorial. I have this machine and could not find a video as good as this one. Thank you

I only learned about this machine today. Me want! I am hoping to get myself an industrial lockstitch machine for most of my work, but not until I move, due to my space and movement restrictions. This thing looks like it would cover 99% of what I would be looking at doing with the lockstick. If standed industrial bobbins and feet fit this thing, that would change everything.

My bestfriend and I both bought this machine last year. She is a quilter and I am a seamstress. I own a Bernina B560 but I have to tell you. This machine is serious.. goes through denim like butter. If it ever died I would buy another. Not expensive at all compared to Bernina or Pfaff.

I'm trying to compare this to the Juki 2000q for quilting. Love Love Love ❤️

Just ordered this. I wish I had seen this video first, I should have ordered it from you. I love all Brother products. Do you have an online store? And do you sell the scan and cut machine? That is what I saving for next.

what oil lubricate can i use for the brother pq1500sl and how often should i oil it? Thank you

Question on the Quick Bobbin Thread Device that cuts the bobbin thread. Do you have to rethread the bobbin thread device EVERY time you cut the thread after using the Thread Cutter?

I absolutely love this machine. PQ means personal quilter but what is SL?

I bought this machine from you a couple of months ago to put on the QZone Hoop Frame, which I also bought from you. It is a solid machine. I also bought the grace sure stitch regulator. Learning to use the equipment as a quilting system was challenging but I have worked though most problems (many of which were user error). I have one problem that I have not been able to resolve. I get skipped stitches occasionally. Is this another user error or is there an adjustment I need to make, either in the setup or something else? I would appreciate your input to help get this problem resolved. Thanks.

Should the pressure foot be up or down when I use the thread cutter?

I would like to know the settings of the free motion quilting if you could, thanks

Thanks so much Ken

Hi from Atlanta Ga USA first time here looking to pay one want to make bags.👀 next time

Ken can you please do a video on how to replace thread cutter blades on the Brother pq1500sl? Thank you

I am looking for a machine to use on a quilting frame. Does this machine have a large enough throat space for quilting on a frame?

Could you do a video on how to do a deep clean? I can't quite figure out how to clean behind the bobbin area but I know there's dust back in there. I'd rather not pay someone to do it if I can do it!!

Also does it have letters n numbers embroidary n at least a few types of stitches?

Does this machine have a binder foot I can buy

I have had this machine for 15 years. No problems except it seem my needle has moved a little to the right. It isn't in the center of the hole anymore. Can I fix that?

looking to find more information on using this machine

I have heard the longest length stitch is 7mm. Is that true?

How thick materials can it sew

I really feel these type of machines should include a double needle for a single stitch type. And how is a speed control / start stop button is like an almost double the price option ? For large quilting and large throat workspace I've found you can either get this type of machine for 550-1100, or you can have to get one that costs 3000-5000 on up to tens of thousands with Bernina and you get a combination of a regular sewing machine with a couple hundred stitches you really never use and a large throat space. Thats alot of money for the ability to use a few more stitch types you want from a smaller sewing machine with a larger working area. But stitches on this type of machine are better because of the lack of movement left to right. I guess really the only option is to have two machines, or if you have the money get one that is as much as a used ( or new for Bernina) car. With the repair costs of a car. Too bad its hard to trust buying a used machine from someone since you can almost guarantee will need to be serviced (costing hundreds perhaps) to get the issues worked out from them. You'd think that after over a hundred years of development they would not be unreliable. But if they were reliable (like the old heavy duty all steel machines of old) they would put themselves out of business I guess. Thats the consumer throw away economy we all live in I suppose.

Does it have the facility to accomodare a twin needle?

I really want to purchase this machine because all of my past machines have been a Brother. What is the clearance with the presser foot completely raised and will this machine sew neoprene? Thank you.

Can this sew leather as well as the Janome HD3000??

What size bobbin does this model use? Also, could you please do a close up of the needle threader? It doesn't look like the needle threaded I love on my PE 770 or my Babylock Melody. Thanks

Is this good in making bags on layered faux leather?

Where can I get a electronic foot control for my machine?

It would be nice if you would show the accesories

What is the best thread and weight to use for quilt piecing?

Does it sew leather for like for hemming motorcycle jackets and pants thanks

Is there a review on how to put the walking foot on. Would you mind showing that please?

your link to your store wont come up.

can you do a video on how to add the pin for leather sewing? or is there already one in the machine?

What size needle is preinstalled on this

May I know how much ? Do you deliver to Singapore

question. I have this brother pq1500sl I want to know if you have a quarter inch foot with guide or wall that would fit my machine.

Also can this machine sew a pintuck and/or use a double needle?

I bought my machine from you a few months ago. I love this machine, except when i use the thread cutter the top thread always comes out and i have to re thread. Can you tell me what I am doing wrong?

I am fixing to try to free motion on this machine. What settings do you think i should set it on to free motion quilt?

I love this machine. I use it more than my multi-stitch cs6000i.

Can I use a curved binding foot on this machine that is sold on face book?ken,do you have this machine in stock?

I bought this machine to put on a Grace Hoop frame. After significant time setting up the frame, I was excited to try the quilting process. I stitched a row that looked good on the top but the bottom tension was way wrong. There was a huge amount of loose thread. I took the sewing machine off the frame to try to get the tension adjusted properly. I have been trying for hours to get it set correctly. I have adjusted the tension on the machine as well as on the bobbin. Adjusting the bobbin tension is very tedious and confusing. The pictures in the instruction booklet are not helpful and quite confusing. The thread breaks after just a couple of stitches. This has happened about 20 times. I have checked and rechecked the treading and seem to have that correct. I am sure I am doing something wrong, but after hours and hours of diligently trying, I am weary of the process. I am confident this is user error but the instructions in the book are so poor I have been unable to identify my error.

I've been using my friend's Brother 1500 and I can't figure out how to use the quilting channel guide with the walking foot. I can't justify buying it if I can't figure out how to use the feet. I hope you'll show how to use the feet because it would really help my business if I can understand how to use the feet. I hope to buy it in 2017/Jan 2018 from Ken's.

I purchased a used machine. I am in Missouri, but have a question that I cannot find an answer to. the machine I bought is a Brother Nouvelle 1500SL. What is the difference between it and the machine you just demonstrated? Thank you in advance for any information you can provide.

Is there a bias binder attachment for this

Are you still in Business? I want to purchase this machine, but with no one who could possibly help should a repair be needed, I am hesitant to buy it. Hope to hear from you soon. Roll Tide

Price please

Can you make a button whole with this machine?

Do you have a extension table for my baby lock Jublint

Is this a zigzag machine ?

How do I bring the bobbin thread up please

I bought this one instead of the Juki version.

Is this made by Juki?

Can you do tutorials on how to use the feet for this machine. And troubleshooting for the brother 1500

sorry, i finally came up.

How much is it in $ please?

Does the machine make zig zag?

Cost how much

I have to check again. Under 1k

I won’t buy anything from this place again I brought a singer heavy duty 4452 last May I had trouble with the tension sense I got the machine it was a costume return now I know why they return it I tried calling this place sent him emails he never got back with me now I’m struck with a machine that can’t be fixed I had it in a shop couple of times about the tension it can’t be fix so thanks Ken sewing place for selling me a machine that was messed up sense day one

Brother, Juki, Babylock, and Janome all "make" a similar version of this machine with slight differences on them. Brothers' difference is it's the cheapest, then Juki is the next cheapest ( I think). They are all made in China, Taiwan, or some other low wage country now a days it seems. I wanted a Japanese made one, but even they are no longer made in Japan, just Japan owned companies with typical construction you can expect from China and eventual repair issues. And really it seems most companies are moving there for cost cutting. Too bad, so sad. If you want quality get a used one from years past, like before 2000, but not so old and an unusual a model or brand you can't find parts.

Ken sure isnt great about replying to KZfaq questions