Quick Tip: Howa Build With The MDT Field Stock

Рет қаралды 23,825

6 ай бұрын

Join Caleb from Brownells in this informative video as he demonstrates the process of installing a Howa chassis into an MDT field stock.
We jump into the technical aspects, noting the stock's construction with a full aluminum bed block extending through the bottom, complemented by a polymer trigger guard. The stock accommodates AICS magazines and is equipped with M-LOK slots for added versatility.
The video then transitions into the gunsmithing segment, where Caleb illustrates the removal of the bottom metal from the Howa action and the subsequent installation of the action into the chassis. He provides insights into the tools used, like the Fix It Sticks Field Armor Kits, and offers tips on achieving the right fit and torque for optimal performance.
Further, Caleb guides viewers through the process of installing a rifle base, specifically the EGW one-piece 1913 base, emphasizing the importance of proper screw selection and the use of Loctite for secure mounting. He concludes the demonstration by ensuring everything is torqued to specification, readying the rifle for the range.
This video is a must-watch for firearm enthusiasts and professionals alike, offering practical tips and expert advice for a seamless installation experience. For any questions or additional support, viewers are encouraged to post comments or reach out directly to the Brownells tech line.

Пікірлер: 57

@ingelri2 6 ай бұрын

Brave man using red Loctite.....that's commitment. 😀

@christopherkoenig2279 2 ай бұрын

thats all use on scope bases. I also put red on the bottom of the bases and clean the action/bases with acetone or carb cleaner before. The bases always don't fit 100% to the action. And between the loctite on the bases and the screws......its nearly impossible to loosen. If I have to remove it, I heat it with a small torch. Blue goes on the screws that hold the rings to the bases. I have had my share of bases/pic rails come loose over time.

@jmkhenka 26 күн бұрын

@@christopherkoenig2279 I would not recommend using actone or carb cleaner on blued steel. It will rust, trust me. If its some other protection like ceracoat then it does not matter. Remove all oils on blued steel is not good.. But back to the loctite. Removing it with heat is easy and not destructive. just warm until it smokes, then it will come loose.

@johnhumphries4632 2 ай бұрын

Thanks Caleb, great video.

@SlickPlayss 6 ай бұрын

After the first video you made about this kind of set up. I have an older stevens odd 6, and wanted to upgrade in the near future to a more futurized cartridge. I absolutely love this new kind of set up and am going to go this route when Im ready! Thank you for this!

@albundy7459 6 ай бұрын

Put mine in a Boyd’s. Extremely happy with how it turned out. Even with a slightly botched bedding job.

@abitofapickle6255 6 ай бұрын

I'm waiting for them to release the Savage version. I love watching the videos you guys make.

@Mr1westie1 5 ай бұрын

Was able to pick up one for my 12FV during their black friday sale. Listed as a factory second, but don't see a thing wrong with it.

@LAlonzo70 6 ай бұрын

that's a beautiful barrel profile...

@wagon9082 6 ай бұрын

Good Video

@brockedandloaded6034 6 ай бұрын

Release the 7prc barreled action, and Ill buy it tonight. Sitting here waiting on the email

@GammaRayTrae 6 ай бұрын

I was looking into getting one of these Howa 16” barreled actions and using an mdt chassis, but with the chassis I want mdt doesn’t sale as a package deal. You have to buy the buttstock separately, it’s better to just buy a sig cross at this point and get an 18” barrel

@tonytable1537 6 ай бұрын

I have a question about these style stocks/chassis. Assuming the positioning of the action in the stock is accurate and it's torqued appropriately, would there be any practical benefit to bedding the action into this style of stock?

@albundy7459 6 ай бұрын

From what I was told that makes logical sense is that neither company can hit each others windows of specifications so it won’t be a perfect fit. Bedding is the only way to perfectly seat the action. I’ve never tried it in anything other than wood stocks, but it makes sense to me.

@adrianwalker9985 6 ай бұрын

Great Video! What barrel is that? Will this stock take the Howa heavy barrel?

@JohnMartin-pp8nl 5 ай бұрын

Yes I built mine with the #6 profile 308 barrel and there is room for more.

@JohnMartin-pp8nl 5 ай бұрын

I just built this exact setup and it's untouchable for the money. Just under 12 Hundo from ARCA rail to decent glass. Excellent factory trigger. Only one zero/break-in day at the range and it put up a 1" 100yd group with M80 ball...LOL. Not shabby; that will likely be the worst group it ever produces. Question/complaint: Is anyone else having mag insertion problems? I have a ton of different AI pattern mags, and they all fit VERY tight. Like no chance of it dropping on its own ever. Must remove from bench and wrestle out. I bought a MDT one to give it a fair shake, and it's barely better. The bolt is pretty smooth on this rifle, but is wonky picking up rounds out of the mags as well. The next time I have the action out I'm going to put the factory bottom metal on and try it on the bench. Still no ragrets. I'm guessing I'm going to end up doing some file/dremel work, but was wondering if others are experiencing the same thing.

@CtrlAltRetreat 2 ай бұрын

Had a howa build a while back without those issues. i'd call in and see if they have a known issue/solution for it

@ZedRedDuece 6 ай бұрын

I just purchased an MDT Oryx chassis and it would not properly latch with my Magpul Aics mags. MDT suggested slight modification to the poly mags, I just opted to order some MDT mags (which of course worked). Just a note on my experience with pmags.

@Mr1westie1 5 ай бұрын

Had the same issue with the magpul. would not latch in.

@nunyabeeswax2575 6 ай бұрын

Hey Caleb, what's going on, did brownells jump the "gun" (lol) and release this vid before MDT could release their own and update their website? I ask this because it isn't showing me on the MDT website that a Howa 1500 SA action option is available for the MDT Field stock.

@cvt2642 6 ай бұрын

Hey I thought the same exact thing! Supposedly there is an MDT field stock that is compatible with the HOWA action on brownells website!

@nunyabeeswax2575 6 ай бұрын

@@cvt2642 brownells usa website?

@chriskey6249 5 ай бұрын

It's a brownells exclusive like the howa actions and the howa la mdt chassis's

@nunyabeeswax2575 5 ай бұрын

@@chriskey6249 just saw them available last night in Australia via afaik, a non brownells affiliated business. Brownells might have the exclusive in the North America and possibly Europe?

@Matto_Harvo Ай бұрын

Do you need a magazine or can you use the floor plate?

@WolverineRecon 6 ай бұрын

How long is the fore-end ? Would you be able to fit the 4 slot m-lok adapter for arca or can you fit the pro chassis version at 13”

@JohnMartin-pp8nl 5 ай бұрын

It only has 3 MLOK slots, but I used the sling stud hole as a 4th point for my ARCA rail.

@WolverineRecon 5 ай бұрын

I received an answer from Brownells the fore-end is 11.3” long

@cyanmizu 2 ай бұрын

Do these not need bedding to the chassis?

@03redrubi 6 ай бұрын

Howa bout dat?! 🤣

@merrettb.outdoors Ай бұрын

Does anyone know if the 16.25” HOWA barrel will fit on this field stock? Or is it too short

@brownells Ай бұрын

It'll fit. We tried it.

@SamuelSalty 2 ай бұрын

How long is that barrel

@CplSkiUSMC 4 ай бұрын

Make sure you slide those rings as far FORWARD as they'll go on the rail before tightening otherwise over time they'll slide forward on their own under recoil. We all know what a moving optic does to group sizes so avoid this common mistake.

@jerryhammack1318 6 ай бұрын

Sad fact that us left handed shooters have adapted to using right handed actions! The true lefty actions are 2 to 300 dollars more !

@M8Military 6 ай бұрын

It also comes down to resale tho. Selling a lefty gun isn't always as easy

@rebel._ 6 ай бұрын

i say its worse being left eye dominant but right handed i have to shoot left handed or i wouldn't be able to see down my sights but AKs work fine though

@PoisonSpyder038 6 ай бұрын

Man I really like this but 300$ is alittle steep I currently have the howa1500 in the HCR chassis it’s nice but heavy

@adamb2619 5 ай бұрын

Magpul is no different with their hunter stock at $300. But it is nice buying the Howa action seperate from Brownells then buying stock seperate.

@williamfry6087 6 ай бұрын

What is MDT? And how do you get the right model?

@tweiss1122 4 ай бұрын

You lost me when you used a crescent wrench (Moscow micrometer, Texas socket set, Swedish nut lathe…) on the scope rings. Whatever gun smith kit comes with that needs to go in the garbage.

@christian-agk-dts-google-map 6 ай бұрын

Hey the AGK DTS Hypo Economist Konzept Institut maison des associations Thüringen united Germany evangelische Union

@ekim000 6 ай бұрын

"Flat dark earth" is such an irritatingly long way of saying beige.

@94twentytwo76 5 ай бұрын

*tan

@BillyBigBalls911 Ай бұрын

Light brown….

@bodegaebler668 28 күн бұрын

Beige is white, not tan or brown.

@googleeyeseyes4033 6 ай бұрын

Sad that they use plastic nuts for something like this and at the cost. Nice unit in general, has the right things where necessary especially for an entry field level while still allowing for some decent bench work.

@alexharwell1346 6 ай бұрын

The plastic nuts just appear to hold the action screws for shipping

@mattnielsen7639 4 ай бұрын

If you know anything about bolt action guns then youd know theyre not for use they just for shipping so the bolts dont fall out and or get lost. smh.

@blazerbarrel2 6 ай бұрын

You pay a lot for a cheap , stiff , yucky , clunky , stock . The aluminum saddle for the barreled action is good , the rest is junk !

@awsomedude12345678 6 ай бұрын

Isn't it $150 thats reasonable. However i wont be getting one i might get one in walnut from Boyd's instead

@WayStedYou 6 ай бұрын

150 bucks?

@awsomedude12345678 6 ай бұрын

@WayStedYou yea my bad i must have been looking at the wrong price, but than again i was never interested in the stock because I thought it was trash lol

@JohnMartin-pp8nl 5 ай бұрын

Plastic is what it is, but the action bedding on this stock is better than any Boyds I've ever had. The plastic is extremely stiff, and feels a ton better than the glass style. People like me want the MLOK capability up front. It has a nice channel for adding lead too (that's really meant as a removable stiffening spar, to allow access to the MLOK holes). This stock also does an inherent conversion to AI mags, which Boyds doesn't offer provisions for.

@kraigthirty4991 5 ай бұрын

Boyds offers m5 dbm bottom metal inletting but you will have to pillar bed the stock and bed the action