2 stroke muffler design is part science and part black magic

Thank you! That answered 1 of a couple of million questions i've had about why folks change their saws! I've seen your variety of mufflers, but always thought it was associated with porting them, rather than just an improvement right away with only a muffler! Once again, thank you good sir! Love to all from Northern Alberta!

It’s a good idea to keep the heat shield on there. Not necessarily because of the heat coming off the muffler but because it helps keep the cooling air flowing over the fins on the cylinder properly.

I love watching professionals run their saw you learn so much about proper technique and safety he does the same thing every time all the time smooth and direct inefficient. So thanks today's black and Bill two lessons for every video that you do when you're on the saw.

Now I'm gonna make one myself for my saw! And that 2nd one made from round pipe with wrenches welded to it looks amazing! Wow!

Love your videos but really love your messages and what you stand for Sir! Really enjoyable and I love learning all I can! You have great knowledge and your methods and opinions are truly perfect! Thank you for putting these out.

Awesome Video Buckin!! I have modified every engine I've owned! I didn't even think about small engines until I stared watching your channel!! Thank you! 👍🏻👍🏻

Amazing!! Great video Buckin! Thank you for what you do, You have a gift and we enjoy every bit of it!

I grew up loving hotrods and drag racing..so the pops and cracks from that "key to the bush" pipe just strike a chord with me..sounds pretty damn rowdy and looks so cool with the scrench outlets..thank for more wicked content Buckin and I see you just dropped a truck packing video so I'll see you there too...have a great day yall and happy Canada day

Oh yeah! Crazy performance mufflers!Since i did my berclaw style stainless steel muffler for my 372 oh dear lord the saw became a monster!!!!!!!

Hellos. You're a good teacher Buckin who are so enthusiastic about your trade. Thank you Buddy

Cheers buckin billy! Keep the heart felt work up. Love watching the content.👍

One of the best comparison vids yet. Iron Horse's muff. really flows. I don't think the exhaust has to slow down to change direction. It just swirls around and out. It would be nice to see if it had vanes, like screw threads to direct it so the flow would just follow the path right out. Happy 4th to the BBR, Army.

The interesting thing with 2 stroke dirt bikes and pipes and muffler is the amount of charge in where the power is. Lower mid range or top end rev just by changing the shape and length and even the thickness of the tubing can change the power but the length of the header portion (first out of the cylinder ) makes big difference in the low end torque

New to your channel... a refreshing change of pace, love your accent, love your trucks, love your chainsaws, love your love of life. Some would say your mufflers don't work (need to use an expansion chamber) but your experience tells me you would be right and the ney sayers would be wrong. Besides, these are working saws and there is no room for an expansion chamber without giving up the versatility of the saw. I love your saw rack and I love thst you stick to the basics when sawing!

Great representation of the quik change on and the design of these mufflers Buckin. Takes a bit of time to make them but it is absolutely worth it for the power and throttle response. Thank you. Love ya brother. 🌲❤️🌲👊🪓

Sweet pipes! Really cool design. I built a pipe for my ms250, made a hi-flow air filter and advanced the timing a little. Seems to have gained a couple thousand rpm. I like that round swirl one the best.

Buckin awesome video I just built a muffler for my husky 372 I built that saw like your husky 371. The pipe I made is something like the ironhorse muffler but with my own design different lengths and angles I used iron pipe. It woke the saw up but the H-jet is super rich for break-in . Buckin you are right the exhaust swirls in the pipe if it is right I see carbon marks in side COOL stuff.

Something else interesting is when you enter the information into an online pipe building calculator it asks for the size and length of the ports and takes that into account. That may be why a particular pipe design works differently than another on a ported saw or non ported saw.

Man’s man right there💪🏽 awesome info brother! Thank you!

Good morning Buckin, enjoyed this video. 😊. Love to all.

I really enjoyed this video!! Those mufflers r cool. I just got 390xp with modified muffler on it, what a lovly sound. I got lucky they stopped making them, I bought from guy that runs arborist department I deal with, he used it to only cut ice for ice fishing lol

would be so cool if you would sell those mufflers i would buy one so fast!

Buckin' Billy Brappin! Love this video, hopefully you'll do another shootout with different pipes soon!

Great video as always buckin, i can hear my ol'man screaming at me for taking bolts out why the saws hot

That saw cut like hot knife in soft butter good info and good demo

good mannnn buckin! love love love it buddy! have a good afternoon!

Those are warm I love it them mufflers are just a thing of beauty

Modifying a muffler , was poaking the screen out . Good show Billy 👍🇨🇦

Billy Ray. Have a great 4th of July and a safe one. Love the channel. 💜💜🍺🍺

Fun inspirational stuff Buckin time to get the tig welder out and wake up a saw. Thankyou buddy great content as always 👍🏻🇦🇺✊🏻🌲🪓

Hey there buddy. Thanks for the upload. Hope you’re feeling happy today!

Buckin another top show how a muffler makes such a big difference on a power saw Thanks for sharing Johno Alice Springs 👍

Enjoyed this video.....but need to rest now as I found it really exhausting.

Hey Buckin’ just wanted to let you know that I’m about to embark on my first voyage in building a pipe for my 372. I like the designs of pipes you have here and I’m sure mine will be similar. Just bought the material I’ll need yesterday. Will send you a link to the results. Thanks brother

Thank you Buckin'!

The length of the header has a lot to do with where the pipe hits its torque. Back in my scooter tuning days I noticed that a longer header would come on later in RPM and a shorter one would be earlier.

👏🏻 been binging your videos on Halloween for the first time and loving it . I’m 39 with 20 years diesel ,auto and industrial truck mechanic , fabricator , welder and body man . I worked for asplundh tree company for 6 months once on mechanic hiatus , absolutely hated it , but I learned to properly fell trees . Ever since I’ve been obsessed with it as a hobby . Recently inherited my gramps old 90’s model Poulans and rebuilt the 2000 and got it running and the 2300cva which got me so high ! Now all my buddies brought me there Husq’s and you’ve handed me a great deal of wisdom 🫡 . Actually considering buying a farm Mac 380 , I know some may slam me for it but I can drop 1000$ on a pro grade 🤷🏻‍♂️ . Anyway , loving your videos sir , thanks for the knowledge !

I note the old Pioneer 620 in the corner, great old things they were. I still have one, my first saw.

Bucking Billie ray Smith, dam man! I love you, your a great inspiration to a younger generation. I am 70yrs old in Aug 19-2022. I learn a lot, about tree cutting, but even more than that, about life.. Be kind one to another, and enjoy life, for it is a gift. I would like to meet you some day and Morgan, and a few others... Keep doing what you do Brother... god is in it, and it is a mission from Yah/god.. i am looking forward to the 800 mile trip. Prayers and love from SE Texas Bear

Buckin, I grilled a steak and fixings and turned you on to watch with dinner. My wife has never seen your channel even though I've been subscribed since your infancy. The only thing that my wife said about this video was, "He's got neat hair"! I thought that was funny! Keep up the good work bro!

Earlier i wrote that i'll make a muffler muself, and i did, today! And i feel the difference, it pulls better and throttle response is also better! And i probably will wear hearing protection now! lol It's a small saw, Hecht 945, 45cc 2.2kW, but difference is there! Thank You Billy Ray for showing these mufflers! I'm excited! =) wow!

Love the bark you get crankin where there is some valleys and ridges it would send out like a harley. Larry Logger the lone timber wolf

I like the designs

Love your video's, I've learned alot In the last month or so. I'm curious to your opinion on the the Stihl ms170 saw, it's my second saw I've owned but I'm liking it for the smaller wood I've been falling around Kamloops BC

Great mufflers. A 1. Really makes a difference.

Awesome love these types of videos

Thanks!

Learning from the video and the comments! 😊Thank You

Excellent video my friend 😀💯👊

I used to cut with an old 372 xp and it was a wicked saw. a true handful for me.

Buckin, can we see the tuning process going from stock muffler to a modified muffler? Do you need to adjust the low jet?

Buckin, that's one sick design for mufflers.i gotta practice my hand file.begood👍🇺🇸

Thank you Thank you!!!

Hi friend, thanks for greate videos. i am going to get my 372xp ported etc. and i really want to build a key to the bush muffler, and i have a few questions😅 is there a video of the making of the key to the bush? I kinda figured out some of it by watching. But i would like to know if the "key" is welded on the outside or if it sticks inside a bit. Greatings from norway, stay safe

I sure wish you could help me find some parts for my old husk 45 special that would be so cool.

I have a new 372xp and was wondering if I could get a “key to the bush” muffler and would you recommend it for a new saw with maybe four tanks of gas run through it?

Cathedral style Exhaust will be ready for the log deck.

Great mod Sounds like music

Thanks for being kind people.🙂

I can tell the difference in the mufflers. I love the old Merc and Ford pickups my friend 👍

The mad scientist in me wants to walk out to the shop& start designing& building a new muffler for the ol JonnyRed

Billy man....been watching you for quite some time....I've learned a $#!+ load...thx for making theae videos....as far as these mufflers and gasket deletes go, would they be ok on a stock saw or better on a ported saw...dont want to damage my 2- 372xp's and just double checking.

Awesome 👏🏻 awesome thanks

I have stihl and husky saws I like both but what I hate about the husky’s is how when you put a muffler on them they got that high pitch girly cry and the stihl has that deep roar but there both good

I have the 2018 372 xp n I would love to get either one of those muffler's if u could send me a link to where I could purchase that would be great 👍👍 heep up the great work

Are these available for a Husky 353, and where would I obtain one? Thx and great video!

The claw muffler sounds the best in my opinion.

Hey buckin billy ray do u remember the muffler I think someone showed 2 u in 1 of ur videos the design of a side by side double barrel shotgun look 2 it and I think that was the coolest thing I've ever seen on a power saw do u think u could find that video again

Good job bro

If you want a noticable difference put a velocity stack on the carb. Paired with the pipe, that saw would pull chain no matter what grind you put on it. Love the content BUCKIN. Keep on keepin on.

Good day Billy, love your content. What's the dimensions of those mufflers?

Hey buckin billy ray how would I have one of those mufflers made

Billy , I'm sure you've commented in the past but I recently picked up a 372xp x-torq. Thoughts on that saw ???

What year is the ranger? I love it.

awesome .peace an love.

Hi Buckin, how is the wood bullet coming along?

Ohhhh that was ripping through that 🪵✊ skiddlydoo skiddly riff raff 🤣

Buckin I think that saw has a blue coil witch is limited , they run a little different with the black coil .

This Husky cuts like Super Fly!

Is the first pipe built with screnches for the outlets?

Great mufflers test!! I made something similar like that and it freaking pulls wood!! hope everyone doing Good!!

Any differents coming out the front or out the side ect back pressure

Due to time constraints my husband just bought a new 372xp. Who sells a muffler out there in the USA area that he can purchase without getting ridiculous in price. We love your channel and the experience you have is mind boggling. So my husband just does not have enough time to fabricate and experiment. Any suggestions would help.Thank You and Lord Bless you abudantly, it definitely shows you love people.

That helps. Is it the same for a stihl as well.

How does the ramshorn compared with all the rest from iron horse

Would you have heard of a JoMac chainsaw in Canada 🇨🇦? Would those mods work on a JoMac chainsaw would your friend (iron horse) that makes the mods

What you need is a tuned pipe like a miniature version of one on a 2 stroke dirtbike.

what if you really dont want to port, But what about polishing the stock ports. im sure it will open it up a little. but will it make a positive difference without, jeopardizing long-term use ? thanks to anyone

Nice mufflers,even nicer,myrtle is ready.

Omg I want the first one for my stihl 066 can I buy one love the sound!!!

Oh man I want a muffler like those for my husky 455 rancher

How are them mufflers compared to the ram horn iron horse

That 372 is walkn the dog wit jus a sharp chain an a pipe!!

Buckin why do you pull up on the pull cord when you kill the saw? Love the content!

How do I go about buying one of these?

Can I put one of these on my 572 AT ?

Is the gasket stuck on the muffler already? How did you do that Buckin?

Maybe i didnt get it in the video, but can someone please explain to me WHY you should change the exhaust muffler? What pros do you get off it? And HOW does it help?

I have this video in the background on all my electronics and I play it from 8:45 anytime someone tries to see what I am looking at on you tube and nobody is surprised.