Build a Custom Bike in a Day with Only Hand Tools!

Рет қаралды 273,846

3 жыл бұрын

This is how to build a custom motorcycle in just a day with simple hand tools. This should work with any standard style motorcycle. Hopefully this gives you some ideas!
Patreons vote on the cars to buy for future episodes - / worthlesswhips
Or support us here - paypal.me/worthlesswhips
Spotify playlist of the tunes I listen to while working on the car - open.spotify.com/playlist/4i0...
*Cameras/Mics*
Sony a73
amzn.to/37YMTXk
Sony Handycam
amzn.to/35OgHV2
Go Pro
amzn.to/38hAldV
Zoom H1 Handy Recorder
amzn.to/30iKtjG
Rode Smart Lav+
amzn.to/36UKdKe
DJI Mavic Air (our daily drone cheaper)
amzn.to/2RnRdc5
DJI Mavic 2 (Drone) the nice expensive one
amzn.to/2tXY57W
Manfrotto Befree Tripod
amzn.to/38aXvTa
Sony 24-70 f/4 lens for a73
amzn.to/2sxfST6
Disclaimer:
Due to factors beyond the control of Worthless Whips, we cannot guarantee against improper use or unauthorized modifications of this information. Worthless Whips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Worthless Whips recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Worthless Whips, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Worthless Whips.

Пікірлер: 369

@WorthlessWhips 3 жыл бұрын

Patreons vote on the cars to buy for future episodes - www.patreon.com/worthlesswhips Or support us here - paypal.me/worthlesswhips

@MiaogisTeas 3 жыл бұрын

Yup, more bikes pls 🙏

@a51mj12 3 жыл бұрын

No more bikes, please...

@williammiao8862 3 жыл бұрын

“Factory cafe” version of these standard bikes seems to gain popularity here in Asia.

@GOLEG11 3 жыл бұрын

At 00:16 Winston are you displaying a Russian 🇷🇺 Flag on your t-shirt... ? Whats the significance M8?

@XANA02 Жыл бұрын

What tire did you use on this gn?

@SmokingMan26 3 жыл бұрын

Look at that young and fresh Winston and Matt. Great that you found a audience to upload this for

@stapuft 3 жыл бұрын

NEVER HAVE I CLICKED FASTER! I'm in like flynn, take me to awesome town! ive wanted to see you guys do something like this for a while now. more bike videos please.

@MrLunithy 3 жыл бұрын

Haven't heard that in like flynn since I left Alice..... lol

@MrCarGuy 3 жыл бұрын

I was hoping you'd cover this eventually. Motorcycles are such a great hobby.

@thevinmeister5015 3 жыл бұрын

Seriously

@befer 3 жыл бұрын

That's literally what they started with what are you talking about. Their whole BRAND was Churchill customs wtf

@BilgemasterBill 2 жыл бұрын

I totally agree. Their ADVChina and old Churchill customs renown should make custom "curated" modified Chinese bikes a natural segue now that they're here in the States. I'm sure lots of folks over here might wanna buy one if they were just "beefy" enough for occasional highway use--say 400cc or more.

@yeticusrex1661 3 жыл бұрын

Ahhh....I get it now....after seeing the colors on "C-Milk's" motorcycle, his name is short for Chocolate Milk.

@KA-vs7nl 3 жыл бұрын

Condensed milk

@ohno8589 3 жыл бұрын

Clear Milk

@jdman141 3 жыл бұрын

These guys are correct, it's for condensed milk. A Winston joke as I recall from Matt's wedding.

@mikebrennan7045 3 жыл бұрын

Cows milk

@yeticusrex1661 3 жыл бұрын

Actually, I knew it was condensed milk...I was making a joke seeing that his seat on his motorcycle was chocolate colored.

@cambodianriverpig7613 3 жыл бұрын

19:49 c-milk looking like the villains from Home Alone

@laowhy86 3 жыл бұрын

MARV?!?!?

@cambodianriverpig7613 3 жыл бұрын

@@laowhy86 very close resemblance

@stevec9669 3 жыл бұрын

Happy to see a bike video here every now and then.

@kristopherbell7158 3 жыл бұрын

As a owner of two motorcycles, a 97 vfr and a 2014 cb1100 i approve!

@vegasracer7 3 жыл бұрын

Yep... really like this. Bikes were the reason I originally subscribed to your channels, so... more please!

@ConnorGMedia 3 жыл бұрын

I actually have a whole build series on my '96 GN125, where I "bolt stuff on" (for the most part, lol). They're just so cheap / reliable, and It's been an awesome time learning the ins and outs. Totally love this build - thing looks sweet!!💪🏍️

@williamswenson5315 3 жыл бұрын

The bikes you rode in your documentaries each had such a simple, but classy style about them. Minimalist and clean, they appeared graceful even in repose. Who knows? Perhaps you should copywrite "Churchill Motors" along with the logo and file it under future projects.

@yonimemonic5396 3 жыл бұрын

Winston, the man with a suit and flip flops :P

@dearjulio 3 жыл бұрын

I had a GN250 at Uni many years ago.Wish I saw this video back them. Cool bikes guys and great video!! 🏍👍

@paulgooderham 3 жыл бұрын

I'm glad you mentioned the spacers and so forth to give us an idea what is really involved.

@bawzworkz5574 3 жыл бұрын

Do more bikes guys. This was awesome and I learned tons of this. You guys are honestly becoming my fav KZfaq’s and I’m following you both since your China only content for ages.

@WalterWhite-gw3vm 3 жыл бұрын

Man watching this makes me think back when I helped my uncle rebuild his buddy's 1992 Harley Fatboy 17yrs ago. It took us around 4 months to complete it and that was the 1st and only Harley I ever ridden, car's are my thing

@zaxarispetixos8728 3 жыл бұрын

Harleys are junk try an other bike.

@Dowent 3 жыл бұрын

I love the bike stuff. Plus it's really impressive how much you've managed to change with so few tools. Imagination and persistence wins through. PS: Thanks for the grip removal tip, I've torn so many, I'll give that a try.

@rwiersema 3 жыл бұрын

What I usually do is just take the 2 bolts out of the caliper and fit that when the wheel is on. That way you're not trying to make 5 things fit at once (especially with dual front discs)

@ahmedp800 3 жыл бұрын

Wow that transformed the bike entirely! Loving your videos, please do more :)

@ronerie Жыл бұрын

Great job on this video ! I just happened to be doing a search for Custom Scrambler builds for the 250 cc Suzuki's and came across yours ! Looking for fender ideas, as I don't like the look of ANY bike without a rear fender, and this video is like, easy, relatively low cost, bike customizing 101, lol !!!!! Great idea for both fenders, and Gave me more ideas !!! Thanks !!!

@MatthiasAI 3 жыл бұрын

This was actually amazing to watch... I never liked bikes before but the amount of tinkering you can do has made me interested.

@grandriver3152 3 жыл бұрын

You kinda reminded of a stewardess on a plane doing the safety briefing.☺

@fynnschwager3633 2 ай бұрын

This video fits perfectly to what I want to make, I really like it that you haven't cut the frame, bc thats smth I was a bit afrait to do but now I see its also posible without cutting it.

@wannaseethevid 3 жыл бұрын

It is recommended when you take your front wheel off to place a bit of a spacer between the pads to ensure the caliper doesn't close up. I usually just place an allen/hex key between them to keep them open. I here tell that if you didn't it is possible to accidently knock your front brake and squeeze them in, it is even possible to actually (say someone pulled the front brake on for instance) push the brake piston passed its seal) and then DOH!!!!!! so place a simple wedge in between to save a lot of hassle.. Just my 2 cents.

@MrStehooper 3 жыл бұрын

The bike stuff is GREAT content guys... Really liked this one, in depth and informative, well done!

@ayedee6681 9 ай бұрын

time to bring this channel back WINSTON!

@johnriley3936 3 жыл бұрын

I really enjoyed this video. It was you guys traveling on the bikes that got me interested in fixing up my dads CB750.

@BryceByerley 3 жыл бұрын

great looking bike. I wish I had this video back in my 20s.

@tomatojews8500 3 жыл бұрын

Awesome Video Winston! Love everything you and C-Milk put out. Just watched your Stay Awesome Documentary the other day and it was phenomenal. I also ended up renting the other documentaries just to watch them over again.

@lyndonbull3581 3 жыл бұрын

Good to see you guys doing some bike stuff again at long last. I love the muscle car stuff, but being an ardent biker and coming from the UK I am not so interested in owning one. I currently work in the Middle East and my future wife is a Chinese woman, so I am always interested in your videos.

@yonimemonic5396 3 жыл бұрын

Loved this one, I hope you do more about bikes in the future :)

@alirezatopiwala8268 3 жыл бұрын

Been looking forward to this for a while. Awesome stuff guys

@denzelfashington3110 3 жыл бұрын

Hate bikes, but this video made me wanna drive one

@natelan69420 3 жыл бұрын

I think this is now my favorite channel from you both. Love all your content but have really been diggin' Worthless Whips lately.

@waylmaster7487 3 жыл бұрын

I actually built my first "motorbike" about a month ago. I bought a cheap Chinese 49cc 4 stroke bike kit and outfitted an old used mountain bike. I'm only 15 so no license or nothing so this is good for now. It does about 50+ Kmph so thats more than enough for cruising Toronto. Best thing is, it cost me under 400 bucks. We all gotta start somewhere! These vids are really inspiring and I love your content. STAY AWESOME!

@prayforpeacenow 3 жыл бұрын

Love to see more do it yourself videos. Nice work.

@marshallkaufman3123 4 ай бұрын

im am 19 from canada i got a yamaha blaster atv and fabricated a cg125 motor into the frame ! its a little ripper. i got the quad for free and you can get the engine for literally like 200 dollars and they are super reliable. my other build im doing is a dt50lc engine into a mini moto dirt bike it's pretty much all done atm. cheers!

@adiohead 3 жыл бұрын

Your custom bikes got me into riding again. Bought an XSR900 and love it.

@WorthlessWhips 3 жыл бұрын

Awesome! C-milk's new bike is an XSR900

@jdman141 3 жыл бұрын

Cool video. You make it seem simple although I know it would be well beyond my capabilities. Fun watching the process.

@andymehrer457 3 жыл бұрын

lol i love you guys but it is funny that i live in the high rockies and yesterday was this first nice day i felt i could brave a ride with out freezing my butt off and you guys have more weather protection than i did just tooling in the garage in socal. IM AM LOVING THE BIKE STUFF THOUGH! you guys could do touring in america on motorcycles and kill it. more than muscle cars i would think. With the stuff you guys have been through in china on street bikes some fire roads and cool towns would be a breeze for you. keep up the good work!

@chrisbrown4396 Жыл бұрын

OMG..Sitting here watching this vid as I just bought a mint 2012 GN, and just surfing through related vids and I'm thinking, man, this guy's voice sounds just like my South African cuzzies voice from serpentza and low and behold! Man this is so cool I this channel, had no idea you gad this, keep it awesome!

@SDreamchaser1990 3 жыл бұрын

I’ve been wanting one of these bikes forever!

@chrispetersen3151 4 ай бұрын

Yeah, Bruh !! I had a GN400 back in say...87 that I got for $400. Black on black like your 125. I was looking for an SR500 Yamaha, but they were all over $1000.. That little Suzuki was a 5 speed thumper, with a top speed of like 80. But it was what I needed at the time to really gain confidence as a rider, I was just a kid.. That's the bike I rode when mastered wheelies around corners, going up stairs, kicking over bikes without using the compression release, etc. It was a good solid bike. If it only had one more gear...

@jordanwilliams6260 3 жыл бұрын

I hope you guys do a little bike series, would love to watch more!!

@Landeville 10 ай бұрын

I have built 3 bikes already but this back to basics video was really good reminder. Now all I need is smaller bike like this 😂

@organiccold 3 жыл бұрын

Amazing build. Simple but done a big diference for better :)

@arminprnjavorac2084 3 жыл бұрын

Please make more videos about motorcycles. Great build!

@edmcwilliams6524 3 жыл бұрын

Winston and C Milk Great Video Thanks

@dula4552 3 жыл бұрын

That was awesome guys!!! Any chance of a parts list for this build? Just as a comparison to get started, or even just an example parts list for the GN? This has been on my bucket list since i first found your channel and watched your build videos back in China. Didn't quite know what sort of build i wanted to do however, but this one ticks every box i wanted. I know exactly what paint job i'll do too! Can't wait!

@SouthAfricanontheground 9 ай бұрын

Great video now I feel I can do this ! Great video 👍

@juststeve5542 3 жыл бұрын

Yay! Bike! Winston's cheap bike challenge from all those years ago is part of the reason why I have a GS250 in 1000 bits in my garage right now! 40 year old JIS machine screws really don't like coming undone! (I should have got a GN, parts are so much easier to find! lol!). The other reason is my VTR1000 is worse on fuel getting me to work than my car! LOL! It'll be on the road this year, honest!

@serpentza 3 жыл бұрын

Can’t wait for it to be finished!

@juststeve5542 3 жыл бұрын

@@serpentza neither can I! I should have made a video series of it, it would run longer than a US election count! (I didn't plan on it to take so long, but then I found a new old stock tank in the original colour and it started turning into a restoration project!).

@zeze3305 3 жыл бұрын

Crazy this pops up as i have been wanting to get into bikes.

@tonystone3397 6 ай бұрын

Great stuff, thanks for sharing.

@Flastew 3 жыл бұрын

Very cool and fun project.

@egleverygreenlight943 2 жыл бұрын

There are some videos of this Peruvian kid working on gn125s, and does a "brat style" mod that has super similar to your design. You should check it out, he welds a custom seat support with a led strip and it looks awesome. I appreciate the way you frame your serpentza videos with the vcr tape intro/outro (nogistalgia factor), it's the little things. Your fathers stories are awesome. You do work that saves lives and is helping save this country. From east central Missouri, Stay Awesome we love you guys here, I am helping share your channel(s) and message for years now. Hi cmilk, love you guys, first saw C.S.C. in 2017.

@tomster7574 3 жыл бұрын

I got an old bike like yours. An ‘80 yamaha 400, the only thing i customized was the handle bars, a bit lower so i lean into the wind instead of being a drag cute sitting straight up. Rear Shock extensions would have been nice if i could have found some to lower it a bit. I like the seats the way they are as its like riding on the frame, for a short guy like myself it makes waiting at a light much easier having a seat instead of bars to straddle. To each their own tho, i like all the things you took off for their function. Especially the lights, ive come up on so many of these customed bikes that i couldnt see their signals and almost ran them down cuz of it.

@ramirezer2302 3 жыл бұрын

I need more videos from this channel

@HazeyWolf1337 3 жыл бұрын

This is great! Thanks for sharing all the great info & personal insights - you guys Rawk! Peace & Best Wishes to You & your Beloveds... Cheers!

@CA5H3W 3 жыл бұрын

I really like the bike stuff, doing a custom bike build is also really good cause you can watch the transformation in an episode or two, you could make cool custom bikes make media on them, then sell or auction them, they're cool, unique, simple and not too expensive, and they would have story behind them... I think you could sell them

@andrewlietz2798 3 жыл бұрын

This video will teach me how to be a really cool dude.

@lifestapestry2968 3 жыл бұрын

Lovely lobby music in the background... 8)

@artkoch10 3 жыл бұрын

I really like the custom bike...thanks!

@Johnny-ww9ks 3 жыл бұрын

Excellent video

@resistencialiberal9555 2 жыл бұрын

I really like this style of video with building the bikes. If you can came bring back another video lie this one it would be awesome

@howtoguro 3 жыл бұрын

Much love, you both are the best.

@pikethree 3 жыл бұрын

Thanks guys! Now I'm searching for a 125cc bike on eBay as a suitable project. Little did I know my wishlist of 1: a K1200RS or 2: a slightly used Hayabusa wasn't going to be enough! Now I need a teeny tiny project to make me happy. Thanks 🙂👍 I already have GSX600F and a GSX750F starter projects....

@WorthlessWhips 3 жыл бұрын

Take a look at SR400 or TU250

@WhiteNorthStar1 10 ай бұрын

It's a beautiful little biks. SOLID tutorial!

@robertbessler5513 3 жыл бұрын

Winston that was awesome!!! Thank you.

@zaid-je5es Жыл бұрын

I enjoyed every second of the this work thank you

@grandriver3152 3 жыл бұрын

Awesome content. I really enjoyed this.👍🌲☺

@demogadget 3 жыл бұрын

love it. More scramblers please :)

@khomol 7 ай бұрын

Is there a button for double like. I’ve never needed it before in all the years of KZfaq.

@mickles1975 3 жыл бұрын

That was a great video. Thanks, lads.

@dendenmushi5458 3 жыл бұрын

Great video

@vincentas1 2 жыл бұрын

More moto vids, I rewatched this video 2times already, also I watched your old vids on your main channel

@NattVarGen 3 жыл бұрын

Great stuff!

@ToolsOutsideTheBox 3 жыл бұрын

Good job. Definitely build a 400cc-600cc+ street bike big enough for American highways

@thereason1010 3 жыл бұрын

Love these videos

@DARKSTAR-ug4dw 3 жыл бұрын

Love the motorcycle videos

@K-H24-EAMaliasNalvat Жыл бұрын

magnifique, j'aime beaucoup !!!

@kevinlewis9151 24 күн бұрын

Personally I like shaved mirrors and upgrading the forks for modern handling. But other than that it was a nice instructional video

@NikBattleRocks 3 жыл бұрын

I always wanted to see how you've made them , good job ! Love it ! Sadly i cannot mod my 150 cc Chinese scootah :(

@NikBattleRocks 3 жыл бұрын

@patrick henry Sorry for the late reply mate , but yeah i follow CycleCruza and used to watch his videos a lot , lately his content has became a bit stale , but i still respect the guy!

@mohangutta8931 4 ай бұрын

That's a legendary Japanese motorcycle brand!!!

@NeverMetTheGuy 3 жыл бұрын

About to walk out the door to help my cousin move his bike into his van for working on at my place. Interesting timing on my part.

@icemancoldman4188 Жыл бұрын

Lo mejor de todos los videos es q no cortaste el chasis. Excelente

@milan4935 3 жыл бұрын

Great Video!

@theonlyguyman 3 жыл бұрын

I love this!

@infactzematrix 2 ай бұрын

need more of this

@onone9149 3 жыл бұрын

Came here from looking into the ccp to ADV customs. Nice balance 🙂

@gvoden 3 жыл бұрын

such a cool video.

@cunningstunt9226 3 жыл бұрын

If you have an air compressor blow air under your grips from the inside and they will ‘float’ off, so much easier! Nice bike I miss seeing the churchill’s

@todd2567 3 жыл бұрын

Are you two toying with the idea of getting Churchill Customs up and running again? You guys made some awesome bikes!

@bonozil 4 ай бұрын

Love it thank you

@lordmmx1303 3 жыл бұрын

young(er) winston. nice :) loved the video.

@Rmx2011 3 жыл бұрын

Good stuff!

@pmolanes 2 жыл бұрын

what an amazing job!!! I love them all. Can i ask the tires measures?

@seimeianri 6 ай бұрын

I had this exactly one in brazil, it this video was made in around 2011 I would have definitely done all those modifications,

@viol8r007 6 ай бұрын

Hmm after doing two 250 CB night hawk and a Gn 250 into scramblers my next one is hopefully going to be an XS 650 and a Suzuki Boulivattd 650 , u have some nice scramblers