Build a Timber Frame Style Wood Backyard Pavilion Part 2 of 3

Рет қаралды 157,122

Күн бұрын

Three part series on How to Build a Timber Frame Pavilion or Gazebo. I wanted the backyard pavilion to be designed and built in a timber frame style with simple joinery. This open wooden structure is the centre piece in our garden. Basic carpentry skills are all you need. Detailed Plans available for download. Gazebo and pavilion designs are plentiful and there's lots of options. Have a look at the shed roof style timber frame gazebo ideas I came up with using post and beam.
SUBSCRIBE: / @manabouttools
Timber Frame Pavilion Plans: manabouttools.com/shop/
SUPPLIES, HARDWARE, and TOOLS for projects
manabouttools.com/build-a-tim...
Tools I Use: manabouttools.com/tools-i-use/
My VIDEO GEAR: manabouttools.com/tools-i-use/ (affiliate links)
FOLLOW ME:
Instagram: / manabouttools
Twitter: / manabouttools
Facebook: / manabouttools
Website: MANaboutTOOLS.com
Patreon: / manabouttools
DISCLAIMERS:
Some of these links have an affiliate code, if you purchase tools with these links I will receive a small commission at no additional cost to you. Thank you!
The tools or equipment seen in this video and have been purchased ourselves.

Пікірлер: 103

@marlenepisani9887 4 жыл бұрын

Now that's a nice jig saw!!

@appleforever6664 9 ай бұрын

This channel is badass! I love it! Gives me ideas for my backyard and tools that I will need.

@user-lw1dt6zd6x 4 жыл бұрын

Thank you! Nice job! Hello from Russia

@Kajpaje 2 жыл бұрын

Great design

@larrymeier8164 5 жыл бұрын

Looks nice.

@xanthanx 4 жыл бұрын

I can't complete viewing your videos; your voice is so peaceful and soothing, it puts me to sleep. :-)

@can2jmoney Жыл бұрын

Man I loving your content , I like how you continue to explain your process every time.I can appreciate that,It refreshes your mind on how you got it done !!

@MANaboutTOOLS Жыл бұрын

I appreciate that!

@tangotango168 4 жыл бұрын

great Job (awesome )

@jonathandonner0723 3 жыл бұрын

awesome!

@santosmartinez503 4 жыл бұрын

Omg!!! Thank you!!! U just helped me getting and idea on how 2 do my brace 👍🏽👍🏽👍🏽👍🏽

@user-nn5uw1kz5g 5 жыл бұрын

Good! 👍🏼

@MANaboutTOOLS 5 жыл бұрын

Thank you very much!

@utahnick 3 жыл бұрын

Awesome video

@MANaboutTOOLS 3 жыл бұрын

Glad you enjoyed it!! Thx

@marcos22571 4 жыл бұрын

I take it you do this for fun because if you did it for a living you would know that you have to work fast to get things done. Production is the name of the game when it comes to construction.

@MANaboutTOOLS 4 жыл бұрын

I do it for fun

@rickyewell3634 3 жыл бұрын

when u work 4 a living, u take your time!

@kevinkleinmann Жыл бұрын

Kent - love your design. Question about how you did the blocking. Since you are adding blocking as you go, I see you screw into the blocking with each new rafter, but after you set a new rafter, how did you attach a new block to the already installed previous rafter?

@777stutz 5 жыл бұрын

At various points in this video you have one of your clones helping you. Where can I get one of these clones to help me on my project? Thanks for the great instruction.

@thefilthelement 3 жыл бұрын

I'm surprised you didn't use a flush trim router with the templatefor the shape of the braces of a round over bit

@1mentalconsumer 2 жыл бұрын

With a name like “MAN about TOOLS”, one would think you might have a router! That grinder and planer used on the edges activated my OCD!!!! Other than that, great work!

@markthompsoncpa 5 жыл бұрын

Could you try one rafter for fit and cut all of them from that one

@MANaboutTOOLS 5 жыл бұрын

That is possible if your beams are exactly parallel to each other in both the top and front view aspects. And the beams do not have a bow in them. That's a hard thing to achieve with rough cut, air dried timbers. And, in my case, the rafters were twisted in varying degrees. Thanks for the questions! Cheers, Kent

@huracan200173 5 жыл бұрын

@@MANaboutTOOLS I had the same question, it seemed inefficient to measure it each time, but I imagined that it had to be a reason for you to not do it that way, having in mind you don't look like an amateur. Thanks for answering!

@TheScottCard 5 жыл бұрын

great camera work, good explanations and beautiful work! I can't believe these don't have more views! subscribed!

@MANaboutTOOLS 5 жыл бұрын

Thank you very much! I appreciate the feedback and I hope the channel continues to grow.

@Steve-ps6qw 5 жыл бұрын

Ha, that was last summer and we were up in North Dakota visiting our son and the sky was hazy due to forest fires in Canada.....then when we made it to Northern Idaho there was more smoke from the fires in the U.S......fires everywhere....

@va8ko8 5 жыл бұрын

нормальная беседка то)

@rdpurdom 5 жыл бұрын

Fabulous craft,andhip! I always enjoy watching true masters do their thing!

@guessnot8015 2 жыл бұрын

You're great you can even summon your clone

@jettkeyser9909 5 жыл бұрын

What is that long jigsaw blade...Seems to be working very well...

@MANaboutTOOLS 5 жыл бұрын

It's this one: amzn.to/2Eq0HxV And it worked very well! Really happy with the cut.

@bobt471 5 жыл бұрын

Awesome skills with the wood And the Camera on editing! Very enjoyable! Keep them coming!

@MANaboutTOOLS 5 жыл бұрын

Thanks!!

@chrisunderhill3739 5 жыл бұрын

Kent - do you use the same size lag bolt throughout construction ... 5/16" x 6" for corner braces, girts, posts and beams? Thanks Chris

@MANaboutTOOLS 5 жыл бұрын

Pretty much. I think a larger size for the connection of the beams to the posts. Can't recall the size. If I didn't show them for that project then I think I may have in part 2 of the woodshed build.

@chrisunderhill3739 5 жыл бұрын

If I put together a cut list - would you check it and see if there are any glaring errors. Maybe it would be a useful addition for your viewers? Thanks Chris

@MANaboutTOOLS 5 жыл бұрын

Sure Chris. Send it here: manabouttools.com/so-contact-us/

@CRAZYCR1T1C 5 жыл бұрын

Amazing how it fits together with mm precision. Well done

@MANaboutTOOLS 5 жыл бұрын

Thanks! Sometimes I get lucky.

@bwms5462 Жыл бұрын

Your plans say to cut 8 large braces and 4 smaller ones, 12 total. Can you tell me where the small vs. large braces are installed? I count more than 12 braces on yuour diagrams. Thanks!

@bacondreamer 5 жыл бұрын

Did you reuse the brace video section from your woodshed video?

@MANaboutTOOLS 5 жыл бұрын

bacondreamer I did. The braces were the same.

@graydation 5 жыл бұрын

When it comes to cutting the birds mouths on the rafters... couldn't you use the first one as a template to cut them all? That way you would not have to lift, mark, carry down, cut and then lift back up to install?

@MANaboutTOOLS 5 жыл бұрын

With this build I had some bowing in the beams and front posts. The top beams were not parallel (front or top down) so I had to cut each birds mouth individually if I wanted a good fit. Thanks for the comment, Kent

@graydation 5 жыл бұрын

@@MANaboutTOOLS ah cool... I think for my pergola design I will be able to cut them all at once. Thanks for the info. Your pavillion looks amazing. I'm gonna get a hell of a workout working with these huge beams. And I'm doing 80-90% of my build by myself. Its not gonna be as tall as what you built... Mine will only be 8-10 ft on the tall side... But my pergola is going to be about 35 ft long and about 8-10 ft wide.

@nickg8424 5 жыл бұрын

maybe a template for the birdsmouth or a pattern?

@MANaboutTOOLS 5 жыл бұрын

Ideally all the birds mouth cuts would be done at once. However, due to variations in the beams this was not possible for me if I wanted tight fitting rafters.

@KevinJones-wn3lh 3 жыл бұрын

When yo made the concrete pillars why didn't you put the posts into the concrete, wouldn't that be stronger?

@MANaboutTOOLS 3 жыл бұрын

It would be stronger in the short term. But over time the wood would rot.

@somedude-lc5dy 3 жыл бұрын

smart to put the blocking in before the rafter so it can help guide you. I've seen people try to do that after the fact, which is much harder

@MANaboutTOOLS 3 жыл бұрын

It helped as most of my rafters were twisted.

@nb2211 5 жыл бұрын

Super sweet construction and nice design.

@MANaboutTOOLS 5 жыл бұрын

Thank you !

@patrickcowan8701 5 жыл бұрын

What blade is that in the Bosch jigsaw

@MANaboutTOOLS 5 жыл бұрын

I wrote a review of the saw and blades here: manabouttools.com/bosch-jigsaw-review-cutting-big-beams/

@graydation 5 жыл бұрын

These videos are giving me some great ideas for a pergola I am getting ready to build.

@user-xt6uv3yr3b 2 жыл бұрын

Не много ли саморезов?

@GameBuddies1 5 жыл бұрын

When you're cutting the bird's mouths on the rafters how do you ensure that the birds mouths are at the same spot on each rafter? After re-watching some sections a few times and your other similar project videos I can't quite see how you ensure the rafters are aligned the same way for each rafter. Also, during planning stages how do you go about making sure your rafters are equally spaced while also accounting for their width? Is there a formula you use?

@MANaboutTOOLS 5 жыл бұрын

Hi, I put a pencil line on the underside of each rafter at a consistent distance, say 18", from the high peak end. I then set this line on the edge of the upper beam. Then I mark the two birdsmouths. Take them down and cut them. On the Garden Pavilion I made a small handsaw cut in the rafter at this mark. That prevented the heavy fir rafters from slipping while I moved around on the scaffolding to mark them. The spacing is straightforward math. And in my case it was okay of I was off a bit on the spacing.

@GameBuddies1 5 жыл бұрын

@@MANaboutTOOLS That makes perfect sense! Thank you for the explanation :) I feel silly for asking about the spacing cuz after a little thinking it is pretty straighforward. Must've just been tired when I asked 😂

@MANaboutTOOLS 5 жыл бұрын

@@GameBuddies1 No worries! Cheers!

@noconz0727 5 жыл бұрын

What kind of blade is that on the jigsaw?

@MANaboutTOOLS 5 жыл бұрын

Noconz0727 MC it’s a long one. Link to it on my site. See descriptions

@noconz0727 5 жыл бұрын

Found it thx

@scottgrafer2222 5 жыл бұрын

I am enjoying your videos and your skills as a carpenter are excellent. Being able to clone yourself must be a huge advantage when building these structures.

@MANaboutTOOLS 5 жыл бұрын

Scott Grafer thanks! But, my clone drinks all my beer.

@kasiaplisz9418 Жыл бұрын

@ericprobinson 2 ай бұрын

man, How tall is Kelvin?

@Chris_Moncada 5 жыл бұрын

Sham-ford

@rodrigopanachao2234 Жыл бұрын

13:04 can you teach me how to create a clone of myself?

@daviddwyer9754 3 жыл бұрын

Very clear and concise instructions. One of the best instructional videos I have seen in a long time. Thank you

@jimmcintyre4390 5 жыл бұрын

Love how you use your circular saw to make groves.

@nb2211 5 жыл бұрын

Get ya tendons out jim

@MANaboutTOOLS 5 жыл бұрын

Did I say tendon??

@crapple 4 жыл бұрын

I like to detail you put on everything. Nice craftsmanship!

@MANaboutTOOLS 4 жыл бұрын

Thank you very much!!

@user-pe9ue2hd3y Жыл бұрын

Can type 2 diabetes end?

@Steve-ps6qw 5 жыл бұрын

Did you stain the wood prior to installing them or is that the haze from the smoke?

@MANaboutTOOLS 4 жыл бұрын

Steve Stained first. The smoke was heavy huh?

@Steve-ps6qw 4 жыл бұрын

Or my bad eyesight....

@tillmansr2002 4 жыл бұрын

Great video. Who did the plans for you?

@MANaboutTOOLS 4 жыл бұрын

Thanks! I made the plans.

@kkopec 5 жыл бұрын

Great video. I have just one question. What sort of extra long blade are you using at your Bosch jigsaw?

@MANaboutTOOLS 5 жыл бұрын

Thanks! Those long blades are really good! I was very impressed with the cuts I was able to make in those 6x6 beams. I have them listed on this page: manabouttools.com/bosch-jigsaw-review-cutting-big-beams/

@nathanyoon7211 4 жыл бұрын

What how thick was the marking stick you used to mark the birdsmouth on the rafters? I noticed you used the thickness as a guide for your cut.

@MANaboutTOOLS 4 жыл бұрын

I can't recall exactly. I try to make the horizontal line about the same length as the width of the beam.

@rickyewell3634 3 жыл бұрын

Wow! Nice to see craftsmanship in action! Who needs help; I've got this!

@gregbrown1083 5 жыл бұрын

Kent, good job (again). It is good to see that you built scaffolding for putting up the rafters. How much snow do you get there? I have to brace my out-buildings when the snow gets deep. I'm in SW Washington state. Good luck.

@MANaboutTOOLS 5 жыл бұрын

Thanks Greg! The home-built scaffolding works very well. We got almost two feet in three days.

@gregbrown1083 5 жыл бұрын

@@MANaboutTOOLS Kent, that sounds like a pretty good test of your construction. My wife says I over-build everything. Be sure to take some video of the buildings with heavy snow, I for one would love to see it. I am trying not to binge on all your videos now that I've found your channel. Good luck.

@MANaboutTOOLS 5 жыл бұрын

@@gregbrown1083 There's a pic at the end of this page with snow falling on the woodshed: manabouttools.com/build-a-timber-frame-style-woodshed-part-3/ And at the end of this page the snow almost melted off the Garden pavilion: manabouttools.com/diy-timber-frame-gazebo-part-3/

@Steve-ps6qw 5 жыл бұрын

Yea, I know my little Ryobi jigsaw would not do that job at all. It struggles with much smaller cuts, lol. That was a Makita, right? That is a quality tool and I believe they also make Ryobi (or is it Milwaukee?)

@mleelman 4 жыл бұрын

Man About Tools! Love the content you're creating. This videos are entertaining and informative. Do you have an estimate for the cost of materials for this build?