No video
Building a 10,000W Hyper Ebike (Tesla Battery)
Рет қаралды 69,344
Күн бұрынIt was funny editing this video and looking back at the bike before it was clapped out and covered in mud.
----------------------------------------------------------------------------------------------------------------------------
00:00 Unboxing the frame
00:37 Unboxing the motor kit
01:07 Disassembling the Tesla battery
02:58 Mounting the controller
4:00 Rear break is goofy
4:46 First test
6:07 Building the battery
8:55 Quick mods
9:27 Installing the battery
9:47 Programming plug
10:23 Front wire cover
10:40 Some quick jumps
10:49 Installing Hubsinks and Statorade
12:16 "Testing" the bike
12:49 Fixing the bike
14:00 Modding the controller
14:20 Breaking the bike some more
----------------------------------------------------------------------------------------------------------------------------
Editor used is Davinci Resolve
@Calthecool 21 күн бұрын
Because everyone keeps asking, the build was around $3,100. In part 2 I will do a detailed breakdown on what and what not to buy, and if building one is even worth the effort (spoiler: you can buy them mostly assembled from AliExpress for cheaper so building one is only worth it if you love building things) I’m not normally the type to ask for you to subscribe, but I have 3 other projects I’m working on currently that are similar to this and the videos doing well helps motivate me to build more stuff, so hit that button! Also, I’ve learned a lot about building battery packs since this video, would anyone be interested in a tutorial that goes through the thought process of making a pack?
@GravitySandwich 21 күн бұрын
sellout :P
@Calthecool 21 күн бұрын
@@GravitySandwich Yeah I know, it hurts my soul to comment something like that but this video is doing too good to pass it up. At least I didn’t say to hit the bell 😁
@GravitySandwich 21 күн бұрын
@@Calthecool Haha i was just joking anyway! You earned my sub :)
@charliejason9615 20 күн бұрын
ye an me (uk) leaning this shit aint much on Internet so always good to build knowledge defo checking out other vids
@Calthecool 20 күн бұрын
@@charliejason9615 Yeah I was in that same situation, and there isn’t too many build videos of these bikes so that’s one of the reasons I made this vid.
@Trailtested 21 күн бұрын
Hats off to you for committing to that full long build of a mystery bike. Coming from a seasoned motocross rider and KZfaq reviewer I cringe to see that suspension snap.
@notsoren665 18 күн бұрын
I love the rough riding and crashing. Really shows where the weaknesses are in the construction
@Spiros219 22 күн бұрын
this video is way to good for only 92 views
@Calthecool 22 күн бұрын
That’s usually how it goes. It’s getting some more now. Meanwhile the 17 second no editing no commentary video I posted on a whim has 60k views, you never know what will do well.
@ayon3x 21 күн бұрын
@@Calthecooljs a vid suggestion to also save u some money and it’d be intresting can you try to make a budget e bike? Usually in the past i can get the price pretty low by thrifting old bikes and getting cheaper controllers and battery’s but u seem a lot more experienced then me 😅. I’d love to see it and great vid btw ur underrated asf
@Spiros219 21 күн бұрын
@@Calthecool i was early that's why it had 92,
@teodorrusnac2777 21 күн бұрын
Now 2,9k 😮@@Spiros219
@Calthecool 21 күн бұрын
@@ayon3x Yeah I am interested in doing that, but I can't decide whether to use a new cheap bike or a used one off marketplace. In a lot of videos like that, the person finds a great bike for like $100 or already has one and that's the main reason the build is so cheap, but most people won't get a deal like that. I was thinking about buying one of those cheap moped style bikes and upgrading it, maybe keeping the budget under $1900 for a 6000w ebike.
@rasmus1600 22 күн бұрын
Damn you guys abused the hell out of that bike. I've taken mine on trails and MTB courses and no damage other than rust.
@Calthecool 22 күн бұрын
Yeah, I'm not the easiest on stuff because I like to fix things so I don't care if they break. We were jumping it to flat and all types of stuff.
@DivyangM 22 күн бұрын
Wow, thank you for not doing "Subscribe to watch how it rides" after building it. Great video.
@Calthecool 22 күн бұрын
@@DivyangM I did kinda do that, but not by choice.
@DivyangM 21 күн бұрын
@@Calthecool That's perfectly fine, otherwise how to grow the channel. But, some KZfaqrs stop the video just after the build and then don't upload the next video for a month which is annoying. I personally enjoy the videos where something happens and then the result is in the same video. Anyway, hope your channel grows. Keep it up. Good luck. 🙂
@XxBanziixX1 19 күн бұрын
Heyo, I work with high-voltage EVs and some stuff I feel like I should just mention as a safety. Please do NOT use solder on HV lines. The HV terminals are meant to be crimped. High voltage connection can easily get hot enough in some situation to melt the solder. It is industry standard to never solder these as it is a safety issue. I would also double check the bus bar size and thickness you are using to connect the cells together. Depending on how much current you pull through your pack, the bus bar (seems like you are using nickel or tin strips) may add a lot of heat you don't want. Very cool build and clean video! Keep up the good work!
@Calthecool 18 күн бұрын
@@XxBanziixX1 I now know to not solder those wires, although it should probably be fine considering they are big copper terminals with 3 gauge wire. The nickel strips are 8 x 0.2mm, which I determined would be good enough after looking at a bunch of forums, all of which gave different values.
@jonesy2009 10 күн бұрын
@@Calthecool just because the wires can take the current without getting overly hot doesn't mean you wont run into a situation like the terminal screw coming loose and causing a high resistance fault that heats the terminal and melts the solder.
@Calthecool 10 күн бұрын
@@jonesy2009 ok, I’ll crimp my wires from now on.
@rainhodl3er72 18 күн бұрын
Loved the extreme riding to find as many as posible weak spots in your build. Not only a smart guy but also a serious bike rider. I hope you take care of safety and wear full protective gear while pushing your bike to it's limits. I look forward to seeing the build update and more riding from you
@Calthecool 18 күн бұрын
@@rainhodl3er72 You are right about the protective gear, I was wearing 60% bike helmet and 40% full face helmet before I saw the suspension snap and my brother ragdoll, now I’m going to always wear the full face.
@cnr420 21 күн бұрын
bro, you have an insane amount of knowledge. This was crazy I wish i could add +1M views. keep up the incredible content.
@jujuboi2302 17 күн бұрын
This was an awesome watch. It was hilarious seeing it get destroyed & then just fixed up again. Glad you’re using the hell out of it. Keep it up!
@Lil-San 22 күн бұрын
Bro you had fun with this that's all matter, more to come! this is good project 😎
@lemonsqueezexd5468 17 күн бұрын
Insane project you got there man, thanks for sharing it with us! Looking forward for part 2
@stockey 4 күн бұрын
That's a hell of a BMS you have there.
@mandalmandal4593 12 күн бұрын
lol talk about pushing things to the limit, this was priceless. thanks.
@scottrocks1993 21 күн бұрын
I built exactly the same battery pack. but 20s 13p LG cells What was built in a triple stack. For my stealth bomber but I used 2 mm of nick And 2mm copper 2x =4mm copper. 2 mm of nickel strips is nowhere near enough. for 72v 150A. And I only used BMS for charging. And use a diy pre-charge system contact for discharging. The way you built that battery pack. It will be touching the sides Very tight. The side boats will be touching. I don't blame you i done them mistakes in the past.
@Calthecool 21 күн бұрын
Yes this was my first pack so there are definitely some mistakes. I think that it will be fine touching the sides, as it's wedged in there tight and I used the plastic sheets. I think that 8mm x 0.2mm nickel was fine for this pack, as each strip will only carry 10 amps. It will also only be outputting 150 amps for a brief period of time, because the motor is a 5T winding so it accelerates too fast to be able to pull full power for long, unless I rode it in deep sand or something.
@ianmangham4570 10 күн бұрын
Great patience and skill with battery 🔋 👌 👍 😎
@throwawaypt2throwawaypt2-xp8nx 20 күн бұрын
thank you greatly for actually abusing the bike (like i would if i had it) and not babying it like most. luv to see the carnage and jumps, def stiffen ur shocks i hear them bottom out
@Calthecool 20 күн бұрын
Your welcome. I've watched enough boring bike review videos where all they do is ride it on the street and maybe a dirt path, I knew I had to actually make this video interesting and show what the bike can and can't do.
@throwawaypt2throwawaypt2-xp8nx 20 күн бұрын
@@Calthecool stay goated hyped for the next vid
@finnmorrey1406 21 күн бұрын
Bro keep posting this videos sick and surprisingly good quality for a small channel
@jonathan-pw5mx 12 күн бұрын
This is incredible. Youre Gonna blow up man
@y0wl0o64 21 күн бұрын
This desveres much more attention.
@tj9959 2 сағат бұрын
Crazy build for some crazy guys, you absolutely demolished that bike! I was super impressed with ur DIY skills. I hope to one day get on ur level!
@yurrfaris 21 күн бұрын
That battery is insane
@Calthecool 21 күн бұрын
You haven't seen anything yet, the battery I make in this video can output the equivalent of 14hp, but people build truly insane packs that can output the equivalent of 80hp: www.reddit.com/r/batteries/comments/1dkubga/first_post_here_26s14p_p42a_936v_nominal_1092v/
@stasi0238 16 күн бұрын
@@Calthecoolhey try making simple arc furnace powered by those batteries using carbon rods for welding. It would be much stronger than simple furnace from wall output with the 12hp power. It probably will melt steel easily
@Calthecool 16 күн бұрын
@@stasi0238 that would be powerful, I’ve messed with electric arcs with graphite with smaller lipo batteries but nothing this big.
@stasi0238 16 күн бұрын
@@Calthecool I used cheap Chinese arc welder (3kw) as simple arc furnace and it melts every metal but has a hard time melting steel and the steel hardens in crucible before it can be used. Copper, bronze aluminium etc melts really easy. I think using such battery as yours you probably could melt kg of steel and use it to make things for bikes. Like print wave metal castings for handles and such.
@yurrfaris 16 күн бұрын
@@Calthecool my jaw just dropped. im running 2kw, you're running 10kw, now 58.9kw???
@bransonclayton 20 күн бұрын
Don't worry. If you don't have clearance. You will.
@loamymtb 16 күн бұрын
Nothing wrong with a little self clearance!
@_444voxeyyy 11 күн бұрын
ONLY 1.22K SUBS YOU ARE UNDERRATED!!
@MathieuTechMoto 21 күн бұрын
Great work, a range test in the future would be pretty interesting !
@Calthecool 21 күн бұрын
@@MathieuTechMoto will do, that will be in part 2
@ghxxtofxxcial 20 күн бұрын
Loved this Vedic he’s so amazing ❤
@nobody23. 8 күн бұрын
Underrated creator u deserve wayyy more than 1.3k subs
@masoncochran5737 17 күн бұрын
the video ive been waiting for since tesla started getting big
@NickPCage 19 күн бұрын
showing how hard u rode that earned my sub.
@ochenGsUp 15 күн бұрын
Great work with the bike mate!
@Calthecool 15 күн бұрын
Thanks
@albertlirbank7611 20 күн бұрын
dope shit, i recently made a emoto as well (although only 8kw) its cool to see how you did yours!
@Calthecool 20 күн бұрын
8kW is powerful, this bike was 8kW most of the time I rode it and it was lots of fun.
@LUCASMACHOWSKI 21 күн бұрын
I did similar build, tesla cells, sabvoton 72200 now on the bike vector ebike frame
@Calthecool 21 күн бұрын
@@LUCASMACHOWSKI the vector frame looks so nice, that would be a fun build
@nerdg2 21 күн бұрын
Damn, learned allot. I think i'm finally ready to take on a custom ebike project.
@bigbilly29 21 күн бұрын
This was a great video, thanks for sharing
@ebikehacker 20 күн бұрын
Just got the frame today
@glory298 15 күн бұрын
Great work sir! You deserve more subscribers
@Calthecool 15 күн бұрын
Thanks! I had 500 last week so they are definitely coming in.
@sams5803 12 күн бұрын
Dude epic! keep it coming!
@Coldlegend214 21 күн бұрын
how does this not have more views crazy
@RastaOnABike 13 күн бұрын
This video has just inspired my ultimate bike build. I will be making one ASAP
@PHARAOH_89 19 күн бұрын
Wow that was super cool!
@ThoughtfulAl Күн бұрын
FAR better than my achievements, I just waddle from bed to the couch each day, and back again.
@the_auyitboy 16 күн бұрын
this is the most custom build i ever seen
@Calthecool 16 күн бұрын
@@the_auyitboy You haven’t seen many then, this one is pretty basic compared to some others.
@mikebergman1817 17 күн бұрын
Subbed. Been wanting to do a project like this.
@Smokey00 19 күн бұрын
lol dang you are full sending that thing dude
@charlesb689 21 күн бұрын
Thanks for sharing! Great info
@Elissandro. 19 күн бұрын
broh u look so inteligent did, amazing video!!
@DaStuntChannel 21 күн бұрын
I have a FOX DHX 5.0 in the rear and a Marzocchi 888 RC3 Evo Ti in the front, they are smooth as butter, night and day from stock sus
@tubularmonkeymaniac 16 күн бұрын
Bro, such a well crafted machine, and the video was perfectly succinct. Could have gone even longer tbh. Thanks for sharing! Can I just encourage you to wear a fullface MIPS helmet? Speaking as someone who just got out of hospital for the 3rd time after a bad bike crash.
@Calthecool 16 күн бұрын
@@tubularmonkeymaniac Yes I would have loved to make the video longer. I’m definitely wearing a full face from now on
@TheTexasDuke 15 күн бұрын
Yall wild god damn 😂 yall put it thru hell
@RainbowSheep_was_taken 21 күн бұрын
This is really cool
@AL-jc5xs 11 күн бұрын
It took me two hours to assemble my ready to go 15KW, 72V 56Ah Samsung cells, 200A controller and new wide frame.
@aeskellion 21 күн бұрын
I love the build, but “hyper ebike” brother that’s a motorcycle
@Calthecool 21 күн бұрын
Yeah, it's somewhere in the middle. Depends who you ask.
@haywirerc 23 күн бұрын
Motorized bike is sick!
@BVLVI 8 күн бұрын
You get what you pay for when it comes to 18650's. That is such an important aspect of the build. For example I can really accelerate hard on my 7kw E-scooter it's pulls just as much as my camaro til about 20/30 mph, not to say it doesn't have top speed but E-scooters with road tires are INCREDIBLY SUSCEPTIBLE TO SPEED WOBBLE AT 60-70mph. "DON'T GET ROAD TIRES" I hit speed wobble twice and I wasn't wearing a helmet because I was just going down my own street. Anyway brother I have some High end LG cells I paid a butt load for but they make a HUGE difference in available power under load. I can go look it up if you want, let me know. Because your acceleration is looks to me about 3-4kw at best.
@Calthecool 8 күн бұрын
@@BVLVI The only time I went full throttle in this video was when I was on the pile of gravel. I’ll show the acceleration better next video.
@fenexj 22 күн бұрын
good vid, nice build
@tonyhussey3610 14 күн бұрын
Such an interesting video 😊😊
@caseymoto 12 күн бұрын
great job😆
@DaStuntChannel 21 күн бұрын
Front forks you can get used Marzocchi 888s, they are amazing
@samuraiscripts 20 күн бұрын
subscribed! nice video
@Calthecool 20 күн бұрын
Thanks!
@ultrasonicbass 17 күн бұрын
Fire video
@eBikeUnikat 7 күн бұрын
Ich hatte diese E-Bike auch 😎👌 und es was ein Traum 🤩💪 Leider kann man den Rahmen nicht empfehlen, da ich dieselbe Schwachstelle hatte 🥴 Cooles Video 💯💪
@peakpineapplestudio 21 күн бұрын
Damn bro you really but that bike thru the ringer 😅 but I love watching people like you fix things again. My e-bike is no where near that damaged 😅
@mandrakejake 22 күн бұрын
Good video dude thanks
@Tony-nl6pf 6 күн бұрын
Surrons rub on the break pads too, don't even worry about it. From factory to time to replace, they were rubbing on all 3 bikes I got.
@SAEChicken 21 күн бұрын
in my opinion a tiny bit of music in the back ground would make these vids be soooooooo satisfying to watch
@Calthecool 21 күн бұрын
In my opinion the background music can be distracting, but I'll give it a try. I had to mute a lot of the clips so I know what you mean.
@SAEChicken 21 күн бұрын
@@Calthecool like nothing to loud but everyone likes there own music 🎶 but I like to see this kind of content
@johnsmith7676 2 күн бұрын
No music. It serves ZERO purpose in such videos. If you need to listen to music when watching a video like this, then you truly are a complete slave to the Matrix.
@ianmangham4570 10 күн бұрын
That awful juddering when the motor gets hot is the 3 phase wires overheating 😮
@suli_jo 22 күн бұрын
Very good video
@user-im8yv6ne4f 11 күн бұрын
hi....looks like you need a thicker fork...and be sure to check metal tempering....the more it gets super hot and cooled quickly ...the more brittle and harder the metal...practice makes perfect...keep up the good work...
@xricsi1097 18 күн бұрын
I had three daly BMS-s and all of them killed my battery after a few cycles. Never buy this brand anymore. Nice built tho.
@Calthecool 18 күн бұрын
@@xricsi1097 Yes I definitely won’t, I’ve learned more about Daly since I bought this one.
@calebmoore8425 23 күн бұрын
I like the videos thumbnail!
@felixb.59 18 күн бұрын
completely clapped it out after a month. legends 😂❤
@Calthecool 18 күн бұрын
@@felixb.59 I prefer the term “testing to find the weak points” 😆
@jshireley 6 күн бұрын
So when are we getting Part 2?? Love the video man!
@Calthecool 6 күн бұрын
New suspension arrives in 12 days, after that I'll start filming.
@jasonking8937 18 күн бұрын
Love this..
@lapque 18 күн бұрын
you should try ohlins shock or a fox air shock on the rear!
@DarioushAryan 19 күн бұрын
bravoo
@ENDOPRYSMyt 21 күн бұрын
Great video
@Calthecool 21 күн бұрын
Aye the man himself! This video wouldn't be possible without your videos.
@ENDOPRYSMyt 19 күн бұрын
@@Calthecool No problem man. and ayyy 12K views in 3 days, you have got yourself a million view video. make sure to get add revanue going. you can make a good chunk of the money back from what you spent on your bike just from this video, Im sure of it!
@Calthecool 19 күн бұрын
@@ENDOPRYSMyt I’m nowhere near monetized, but I’m definitely going to turn it on when I get there.
@ENDOPRYSMyt 19 күн бұрын
@@Calthecool oh interesting I thought they changed it to 500 subscribers and 2k hours watch time.
@leedchristensen Күн бұрын
10,000W sounds awesome but it’s only about 13.4 hp😂, nice work though!
@spongeimperium126 16 күн бұрын
Looking at it, that rear shock does nothing for you legs because the bottom bracket is mounted directly on the rear swing arm
@Calthecool 16 күн бұрын
@@spongeimperium126 Yeah it isn’t the best design.
@ianmangham4570 10 күн бұрын
I'm glad you cut that big ugly stand block off 😅
@kokujins6931 21 күн бұрын
ur gonna blow up
@Christopher-cr7pw 18 күн бұрын
You should upgrade to Fox springs and forks.
@Calthecool 18 күн бұрын
@@Christopher-cr7pw That would probably double the cost of the bike. I totally would if I won the lotto.
@jiggilowjow 16 күн бұрын
hey for the brakes move the mount braket 180 ansd the caliper will not rub
@user-vq7ue6vz4h 21 күн бұрын
BROO YOU NEED TO TELL US MORE INFO HOW FAST DOES IT GO HOW LONG CAN THE BATTERY LAST HOW MUCH DID IT COST YOU ARE anyways good vid bro keep it up i also want to know how did you learn to do that and is it possible for someone like me to do it at home
@Calthecool 21 күн бұрын
It can go 45mph/72kph if I enable something called "field weakening", but it goes 40mph/64kph without that. It cost around $3100, but it's about to cost $3650 when I buy new forks and a rear shock. The battery lasts a long time, I can't tell you exactly how long because I haven't measured it. You could do something like this at home, but you would need a lot of experience and tools. I can do this because I've been building stuff like this for a while: kzfaq.info/get/bejne/iNdjYNt5na-0l2Q.htmlsi=BR-WOU_wcyY8tDoj
@user-vq7ue6vz4h 11 күн бұрын
@@Calthecool thanks bro i have some experience and i also know people that know how to weld and stuff like that so that is no problem but i dont know where to get a tesla battery where did you get yours i have no idea where to start searching and do you have like a patreon or some way i can contact you for some help tnx
@Calthecool 11 күн бұрын
@@user-vq7ue6vz4h Where are you located?
@user-vq7ue6vz4h 11 күн бұрын
@@Calthecool serbia belgrade
@markuslimseth8426 20 күн бұрын
Next time use acetone, it dissolves the glue from thr cells. Place the cells standing up in a 1cm bath off acetone and after 1 houre the glue will just fall off.
@Calthecool 20 күн бұрын
@@markuslimseth8426 there probably won’t be a next time, but I’ll keep that in mind.
@markuslimseth8426 19 күн бұрын
@@Calthecool haha mee to. its so boring and tedious
@ercantopuzoglu 11 күн бұрын
wov nice
@High.Gear.Garage 20 күн бұрын
I’m waiting on my new e bike gonna be a review on my channel
@yrguitar1 6 күн бұрын
As much as this is an awesome video and cool project, homemade battery packs are a big red flag to me. Without a proper bms and safety testings, it's basically a fire waiting to happen. Be safe man!
@Calthecool 6 күн бұрын
It's got a BMS and it's all wired correctly. I think the cheap Chinese battery packs assembled by actual children are the bigger issue, and the people who buy those also tend to not take care of them. I only run this pack at max power for
@yrguitar1 6 күн бұрын
@Calthecool personally I wouldn't use a bms that wasn't specifically designed for a lithium ion pack. Is the bms certified? Has it gone through proper testing? I have seen 18650 fires myself and they are quite scary. They release toxic gases, fire, and spread fast. Uncertified, untested Chinese batteries are also a huge problem. That's why laws are being passed requiring certification. That doesn't mean homemade battery modules aren't. Additionally it's not during use that scares me most, it's during charging. Does that bms monitor temps in addition to just voltage? Maybe its out of an abundance of caution, or from what I have seen with li-ion and 18650 packs, but At the end of the day I wouldn't risk my safety or my families with an untested uncertified battery pack.
@Calthecool 6 күн бұрын
@@yrguitar1 it’s made for lithium ion packs, and it has temperature sensors and a Bluetooth app that lets you check individual parallel group voltages. For the first charge I was constantly checking the voltage of every parallel group.
@joemulkerins5250 7 күн бұрын
Massive effort to build it. Immediately destroyed it. Fixed it. Destroyed it again 😂
@Calthecool 7 күн бұрын
You can probably predict what's going to happen in part 2. The swingarm is already bending.
@FluePeak 21 күн бұрын
Would be fun to get all the links of stuff you used, would be a fun DIY project
@Calthecool 21 күн бұрын
@@FluePeak It would be cheaper to just buy one on Alibaba, but I understand how fun it is to build one so I’ll probably do a rundown of all the parts in the second video. What I bought vs what I would buy now knowing what I know now, stuff like that.
@x-amus2719 18 күн бұрын
❤
@nandoproyectos3524 21 күн бұрын
Estoy listo para mi proyecto
@Calthecool 21 күн бұрын
Build it!
@wussu3496 21 күн бұрын
black goes faster
@Calthecool 21 күн бұрын
Yeah that's why I got a black motor and controller, should I wrap the battery in black tape also?
@Beefstar14 20 күн бұрын
Yes
@Tm_Energy 17 күн бұрын
Remember me when your famouss
@Calthecool 17 күн бұрын
@@Tm_Energy I will don’t worry
@iamnooneno1 17 күн бұрын
Wow
@angusmcgil 12 күн бұрын
hiya switching to a smaller chainring actually makes it harder to peddle a 42 to 48 tooth chainring is the easiest to peddle
@Calthecool 12 күн бұрын
@@angusmcgil That was the front chainring, I wanted more torque.
@angusmcgil 11 күн бұрын
@@Calthecool haha im old fart now so my mind thinks being easier to peddle is what its about ,have you seen those Schluf drive from crank and chain ring units ,they look awesome having 3 speed kind of over drive is what it seemed to be ,think they cost as much as a small island country though
@Calthecool 11 күн бұрын
@@angusmcgil those look interesting, would love to see the inside.
@damianhambly6493 21 күн бұрын
hey good work! fast ace forks n rear shock ali x safer ! bout 700 US cheers from a land down under !
@Calthecool 21 күн бұрын
Something like this?: www.aliexpress.us/item/3256805564115262.html?spm=a2g0o.productlist.main.1.60c781ms81ms8G&algo_pvid=3cd775fb-be0e-4c46-bdb8-d144df0c86a2&algo_exp_id=3cd775fb-be0e-4c46-bdb8-d144df0c86a2-0&pdp_npi=4%40dis%21USD%21890.00%21481.50%21%21%21890.00%21481.50%21%402101ec1a17206122137668762e389a%2112000037888314378%21sea%21US%210%21AB&curPageLogUid=XsWrGePfE91h&utparam-url=scene%3Asearch%7Cquery_from%3A
@olotsu 17 күн бұрын
do some street riding to show off how fast it is
@Calthecool 17 күн бұрын
@@olotsu I will in part 2
@GapRecordingsNamibia 20 күн бұрын
I hope you tuned the controller to the motor? If not you will not be getting the full torque, cogging can also be heard especially in low speed high torque manoeuvres if the controller is not properly tuned...
@Calthecool 20 күн бұрын
@@GapRecordingsNamibia it came tuned, it always ran really smooth except that one time when I got it really hot.
@MickyBee73 22 күн бұрын
This should be good as I know you know your $#!t as I've seen you around on various platforms 👍
@Calthecool 22 күн бұрын
Where else, was it Reddit? I've been active there recently, I love that hyperebikes subreddit.
@SpeedTaco66 20 күн бұрын
Great video also what's the frame kit
@Calthecool 20 күн бұрын
@@SpeedTaco66 It’s a frame made of metal? Did you mean to ask where I bought it? It was on Amazon but it’s not being sold anymore, you can find them on AliExpress.
@SpeedTaco66 20 күн бұрын
@@Calthecool oh ok thanks
Ladi & Margaret
Рет қаралды 382 М.
Nikita Zdradovskiy
Рет қаралды 7 МЛН
ОВР Шоу
Рет қаралды 8 МЛН
CarsandCameras
Рет қаралды 617 М.