Update log 11/16/18 Drift truck - added the exhaust (finally) - bug found not much space between the exhaust and the frame just gonna hope and pray - since the coding for the welding is broke need to give it to a friend to attach the peace’s of the exhaust together - side exit of the exhaust will not be a whole i made a plate Other things - removed Dremmel for braking too often - the main character can’t weld steel as well yet working on that code - added file

I just got a hair-loss therapy ad before this video 😂😂😂

My dream is to hear the sound of the truck. Wow dis an awful lotta likes...

So happy this build is regular agin 👌

YAY MORE GINGIUM... The drift tuck is looking nice...

After a hard day of work Exhaustium, is wait for it, exhausted

Hey Gingium I suggest getting some frame stiffening added. I sware you can se the flex between the cab and the bed when you lower the truck down. It will help a lot.

"I am exhausted"

When you have the truck sent off to have wired, you should make sure they dont fire it up unless your there! That way we all can get a true first start video!!!

Quick tip Gingium, when cutting rubber hosing such as the coolant pipe. It's easier to use a hacksaw and then use a lighter to clean up the fabric reinforcement after :)

Hell yeah. It's 12:46 am, i have a glass of water and Gingium uploaded a new video. This is going to be a good night.

Yes more drift truck, love all your builds right now Caleb keep it up

Get an air powered die grinder rather than a Dremel. You can get bits just like Dremels, they're a lot more reliable, their speed is variable, etc.

Is the engine hardmounted in the drift truck? If not you're gonna want some flex joints on the exhaust.

since the tubes on the right bank is longer than the left, the truck will have a litle bit of a rumble like a subaru. it's awesome to just think about.

Nobody tries harder than you. Sometimes you win and sometimes not, but you never stop reaching. Good for you. Nice to see your progress.

Hey man, love the videos, but I reckon you should really take a short break. I can see from your frustrations that you're getting burned out by all this KZfaq business and I feel a bit like you're just making videos for the sake of it. I still enjoy the content, but maybe just have a little break for a week or so and come back refreshed and ready to take on some new challenges!

Dude I'm genuinely so happy for you. You're truck is finally coming along, your finally getting to move out and it's just awesome to see how well things are going. I wish you the best of luck.

Don't get discouraged, my tips from 15 years in fab, get your technique down on mild steel, it's cheaper for the learning curve, then once your practiced up hit the stainless. No the settings on the machine won't be the same, but the physical motions of foot pedal, feed speed of you filling and rate of motion all will translate over, I got faith in you! You'll get there you have a passion for cars and building em, it'll come bro!

Man gin I promise no other youtubers in the car community goes as in depth with showing the build process than you..keel it up man

Hey Gingium, some advice. When you drop off the truck, bring your welding hood and ask the person who can weld stainless how he has stuff setup. Stainless is a pain in the ass to learn how to TIG, and the best thing you can do is have someone experienced help you get started with a good setup and good techniques. I wish you the best of luck and can't wait to see the drift truck finished

glad to see you refresh and pull through, love this build, keep killing it

Hey man I'm really proud you're sticking with this project no matter the problem you face. Keep truckin through it

Looks so good!! Love how this is coming out

I’m so excited to see this truck start up. The V8 grumble makes me moist.

You should keep this quality on all of your videos.

So happy to hear that you ended up having fun doing the exhaust! such a relief

9:55 " I got myself something that wont break .... A FILE " 🤣

14:35 “i’m really exhausted” nice pun

love this fabium video, keep em coming!

Can't wait to see that badass v8 run!!

That exhaust looks really nice. I hope it sounds as good as it looks. You should put a bigger tip on it and maybe a black one to match the black plate your talking about. Anyway keep up the good work my brotha.

Dude pretty dope I remember you when you were taking the Miata to a shop to get an exhaust made now here you are making your own. Good shit.

I cant wait for the next drift truck video.. love you. Good work

It’s looking awesome! A driveshaft and some wiring away from rolling!

Remember when gingium had hair Yeah me neither

really good job on the exhaust bro, love the set up

practice makes perfect my guy. I started tig welding about 2 years ago and only recently my welds are looking fine! Keep at it! One thing that works for me is having a good place to rest my torch hand while welding. Also dont take the filler rod out of the gas flow when its hot beacuse it will get contaminated, if you have a pedal for your welder you should use it. It really helps beacuse you will be able to modulate the amps!

Looking good, keen for this to run!

Great vid, loving the music in this one.

Been subscribed for a fat minute. Been around since before the rally miata haha. Cool to see how far youve come. Keep up what your doing, i love it 👍

I like that setup. Also looking forward to hear it.

You are one of my favourite KZfaqrs and I understand u don’t make the most money but it’s really nice to see u doing something actually productive

Good work! Gave me inspiration on my project. You can do small tacks without filler with lower heat and working the puddle with very little weaving

You gotta use some rust reformer and bed liner on the frame while its still solid plus it'll clean up the look of the underbody and make that trans look like its suposed to be there lol

14:37 «I am really exhausted» 🤣🤣🤣

Dude! Awesome job!

It would be a nice detail to cut the exhaust tip to sit flat with rest of the body panel. Just saying in case you haven't thought of it. Can't wait to see this project get finished!

I really dig the idea of the plate!!

That exhaust turned out sick!

You have come a long way. One can only admire.

Can’t wait for it to be finished!

Looks awesome dude

The side exit looks SOOOOO good!

Also, don't worry about your welds looking nice. It's stainless steel, so what you really lose from cooking your welds is the stainless properties. You don't really need to care about that though, it's a drift truck that's not going to see much rain/snow.

Love this truck, and keep your head up gingium! Can't wait to see you throw it around some corners

Looks great 👍🏼

Love what u did with the exhaust.. Gonna sound good I bet..

That looks clean man

welding tricks and tips on youtube, that guy knows his stuff learned almost eveything i needed to know from him.

You've come a long way in your mechanical ability, keep it up!

You could make the hole smaller and put some rubber door insulators in it to minimize/muffle the rattling.

Quick tip for when welding, Wear a baseball cap backwards under your helmet to protect your neck. I learned this when stick welding and a spark from a 6010 rod hit the back of my neck. If you've ever stick welded you know 6010 likes to spark and catch fire

14:37 i see what you did there! "Really tired really EXHAUSTed"

I'm really "exhausted". Nice pun Gingium. Nice pun.

Coolest b2200 ever keep up the good work and don't give up on this build

So cleannnnn

So sick!

After working on exhaust he was "exhausted." Great video! It did turn out really well. You could've done a dual exhaust out the side if you had wanted the true dual setup.

Looks great

im way impressed caleb. Whether you welded it yourself or not its still a gorgeous exhaust and looks completely professional. Always cool to see Gingium Fab

This "tuck" has been super cool ever since you first said you were going to make it a drift truck

Watch your torch angle it plays a huge role in your gas flow if you aren’t covering the weld with gas you will be having a bad time you have to roll your wrists when you weld pipe. And maybe try a gas lens I love gas lenses better gas coverage

You didn't fail at all you've only been together welding a couple of weeks, look what you achieved with the exhaust mock up.

Been watching since the forza built or bought videos bro and it’s amazing the progress you’ve made in just a few years keep it up

Love the exhaust!!!!! Awesome work!! Would have been cool with a side exit on each side but the single is cool 🤘🏾

You videos have improved so much, I'm proud man

Good luck with the move bro!! Next step in life

I like the new table 👌👌

Looks awesome bro

In my head this will always be the dwift tuck. Love ya homie

I'm in love with this build! Nice work dude! don't be mad at your welding some people take years to master this shit and you are already putting a truck together I'm so amazed! One day I'll make my way to usa just to give you an handshake such an inspiration sir!

Be patient. Love the videos, keep it up.

I'm a perfectionist too, it's annoying. I understand your struggle.

I was watching the previous video of the truck to catch up and you uploaded this.

Thank you 2 long videos in a row.

Side exit exhaust, yes plz Keep up the good work man

i'm so pumped to see the truck running by itself. Also to see your new houseium. How are you gonna call it? the Caveium?

It is good to see the drift truck getting done ♥ I hope yyou'll paint the front bumper in red ♥

Very nice job

The music was fire on this video, I don’t know if it always been this lit and I just notice but damn, it was nice. (Probably cuz (I think) it’s the first time a watch a gim video with headphones, I usually watch it on the tv like it’s a movie or something)

Nice build so far, hope i see it around maybe car meets in the summer.

Hey bro, im an aeronautical tig welder for the military, first and foremost, you need a chair when welding, it helps trust me haha, also go nice and slow and make sure everything is clean, and dont be selfish with that filler wire, its cheap

I think that for the exhaust plate you should make it out of that kind of metal that has the little diamonds on it. I forget what that kind of metal is called.

Cleanliness is key! And like 865356 other things lol. Practice is all can say, mess with settings and make very small adjustments at a time. You WILL get it! Hell even angle of tip on tungsten to the tungsten itself

Yess I love side exhausts! I have a BMW Z3 and I always wanted to make a side exhaust, now I realize that would be a little too much for a Zz

a few tips for welding: clean your metal well in the weld area fitment is so important when welding pipe like this get a variable tig pedal: you can adjust your heat on the fly and itll help you learn when you need to go slow. check your argon flow/ torch angle/tungsten type

Love your content

Pretty clean truck

getcha one of those swivel-head deburring tools, makes cleaning chops so much faster!