Thanks. Errrr it was very much an on and off job but I think probably close to a weeks worth of 12 hour days easily. I think if we had a framing nailer we wouldn’t got it done in half the time 😞

my first thought was the killing of all that natural light... dang shame

Hi. Yes it’s 600mm radius so about 2ft

@@morganbespoke6311many thanks. So I've read correctly.

Do you need that much of a curve or can it be smaller like using a curve

We use BendyPly for the curves and normal mersnti ply for flat walls

Expanding foam to brace the back, 2 pack filler to build it up and then just a standard flexible fine filler on top. Holding up fine so far have since painted the whole wall with a rubber paint also

It is from meranti plywood and bendy ply for the bottom curves and corners

Hi. We jsut skinned the floor with a thin MR plywood and screwed every 200mm centres we did a wash coat of primer then a rubberised paint over the top

@@morganbespoke6311 thank you

@@morganbespoke6311 how about plaster you put in on clean wood or primer first? Is it not going to fall off from the wood ? And how about the paint when someone do some black scratches from shoes you painting it over or washing? Would you be so kind and send me links to the primer plaster and paint that you used and how long you are already using it and dose it stay on the wood for years ?

@@januszciechowskiphotograph7297 Plaster would fall off, the wall we built was very large and flexible and moves so plaster woukd not be good, i would have recommended fibreglass over the whole surface then paint but they just painted it. Yes it does get marks on it a lot but customer always changes the colour from white to green so marks don’t stay for long as it is always being re painted. Cromar White Cromapol Acrylic Waterproofing Roof Sealant Fibre Reinforced Roof Coat 5Kg www.amazon.co.uk/dp/B01N3YU726/ref=cm_sw_r_cp_api_glt_fabc_7PXTAJH1XNAH55G612M2

Hi. Yes absolutely!

Hi. We use 6mm in U.K.

I think if use 4mm then combine with a PU glue

Hi. It’s about 7m wide and long and about 3.2m tall

The square foot?

@@morganbespoke6311 Yes

@@tarun_6864 so I think, it ended up around 210sqft

@@morganbespoke6311 thanks :) looks awesome

Bendy ply

isn't wood noisy? (footsteps + creaking)

@@kiedwinallan can be I guess. Luck enough I spent probably close to 2 days fixing the floor down with over 3000 screws to help reduce it and then flipped each hole in and sanded it! It’s holding up great so far 💪🏻