Building a Folding Adirondack Chair with Free pdf Templates

Building a Folding Adirondack Chair with Free pdf Templates | TSW Woodworking

Рет қаралды 6,885

Күн бұрын

Easy to set up, easy to store away!
Make this Folding Adirondack Chair with the free plans!
00:00 Intro
01:32 Prototype
02:24 Breaking it down
02:46 Free Plans
03:31 Putting plans together
03:53 Making the Arms
06:53 Long Legs
06:56 Finishing up Arms
09:13 Back to Long Legs
10:08 Seat Slats
11:16 Starting on Seat Back
11:53 Box for Seat Back
12:16 Back Slats
13:13 Front Legs
13:45 Assembly
14:12 Final Product!
Link below for free pdf plans (Make Sure Printer Setting is at 100%) and use alignment triangles to tape pages together. Enjoy!
drive.google.com/file/d/1rGNX...

Пікірлер: 38

@ravereps1 4 күн бұрын

Just finished the first one. I converted the wood to 5/4 which took a little rework but the results were fine. Going to use this one as my templates to make a set of 6 chairs. Thank you very much for the free templates.

@tswwoodworking 4 күн бұрын

That’s awesome! Made my day.

@davidseddon8795 7 күн бұрын

Excellent tutorial. Thank you!

@tswwoodworking 4 күн бұрын

You're very welcome!

@user-oe4bw5pt5v 5 ай бұрын

Thank you for the templates!! Made it relatively easy to make. Look forward to your future builds.

@tswwoodworking 5 ай бұрын

Awesome! Thank you!

@wimpaulussen6409 7 ай бұрын

Thank you again for your generosity with the plans. I already am using the plans for the non folding version.

@tswwoodworking 7 ай бұрын

That’s awesome! It makes me glad to hear they are being used.

@alexreid4131 7 ай бұрын

This is excellent and so generous of you to offer the plans for free. I will store these plans away for the spring when I hope to make a few of these God willing. Thanks again ❤

@tswwoodworking 7 ай бұрын

If you’re planning on making more than one, I’d make hardboard templates to pattern from. Glad you liked it. Good luck!

@alexreid4131 7 ай бұрын

@@tswwoodworkingyes indeed that’s my plan. I tend to make my templates out of MDF so hopefully that will also suffice for this project. Love the design and look forward to your future projects. Happy Thanksgiving buddy 🦃

@tswwoodworking 7 ай бұрын

Thank you! Have a good Holidays!

@springhollerfarm8668 Ай бұрын

If you framed it with 3/4 marine grade plywood and decked it (seat, back and arms) with cedar, it would last decades. The decking would be replaceable and the frame everlasting. I think the plywood idea is genius. No splitting or cracking around the bolts... Beautiful chair.

@tswwoodworking 28 күн бұрын

Thank you! But, I mainly used the plywood to make my prototype. I like the weight of the cedar, easy to move around. Main thing is to keep busy doing what you enjoy doing. Thanks again

@adamreese9190 6 күн бұрын

Great video and thank you for the plans. I can wait to start my chairs.Did the 5 pieces of 1"x6"x12' only make 1 chair?

@tswwoodworking 3 күн бұрын

Yes, that’s correct. That’s what I’d start with. Should be clear when you print out templates and lay it out. Make sure printer size is 100%. Many of them auto adjust.

@kiowafourty964 7 ай бұрын

Who else is making two of these for their wife for Christmas? 😁

@Wolfy459. 2 ай бұрын

Thank you for the free plans!! Would it be possible to make the back concave (curve contour)?

@tswwoodworking 2 ай бұрын

The upper and lower stretchers where back slats attach are concaved. It’ll give you a curved back. When you print out templates, you’ll see. I probably made a comment about it in the video too. Good luck!

@joaquindgarza 6 ай бұрын

Beautiful chair. What size spacers did you use for the seat slats?

@tswwoodworking 6 ай бұрын

Thank you! I spaced them about 3/16”. If I’m lazy, sometimes I just use two drill bits as the spacers to get the spacing the way I want.

@user-zg8kj2ue6d 4 ай бұрын

G’day, all the way from Australia! Very new to woodworking. Is there supposed to be holes on the back box verticals to attach the armrest ? Help needed as it is doing my head in 😂

@tswwoodworking 4 ай бұрын

Yes, pivot holes are 12.5” up on vertical pieces. If you look at 12:00 on video. Just center them on vertical pieces. Hope that helps! Good luck!

@dewaynehill8137 4 ай бұрын

What do you use for hardware to connect the folding piece

@tswwoodworking 4 ай бұрын

Carriage (stove) bolts. Except for one set of lag screws. I think I listed hardware on first page of pdf. Good luck with project!

@tazo1jd 2 ай бұрын

do you also had a blue print drawing for ASSY

@tswwoodworking 2 ай бұрын

No, just the templates that you can access through link in the video description. If you make them and follow video, you’ll do great.

@user-zr4vd3rk9m Ай бұрын

Hello, can you tell me what size the armrest should be in centimeters?

@tswwoodworking Ай бұрын

Yes the arms are 71.12 x 13.97 cm (which is 28 x 5.5 inches)

@norbertfaron2039 3 ай бұрын

Hello good job I really love this chair but I’m having issues with measurements pice on page 3,4,5 Says 21 3/4 when I put template together and I measured it’s only 21 1/4 and also the armrest on page 1,2,3 the measurement says 28 1/16 and when I measured the template it’s only 27 1/8 and page 10,11,12 supposed to be 21 inches and 22 inches top one is 20 1/2 and bottom one is 21 1/2 can you check measurements please

@tswwoodworking 3 ай бұрын

Is your printer set to 100%? They should be 1” squares. Some printers auto adjust. Let me know if that was it.

@norbertfaron2039 2 ай бұрын

I checked my printer everything looks good. Some dimensions are OK some are off.

@tswwoodworking 2 ай бұрын

Sorry for the trouble. I reprinted all the pages out. They are 1x1” squares. Only thing I can think of is when you overlap the pages to line up the 1” squares that is where the issue is. Since half the square is on one page and half is on the next page, they overlap a bit. Since I printed it out, I’ll draw in some alignment triangles that overlap the pages. Then, upload the file again.

@tswwoodworking 2 ай бұрын

I added some alignment triangles on the pdf to help when taping the pages together and reloaded pdf with a new link. My printer did give me the right lengths when I printed it out. Hope that helps. Sorry you were having trouble. I thought the 1" squares would work for people to align the pages. I should have added the triangles before. Good luck.

@joshl8015 7 ай бұрын

Good content but you’re missing a lot of information. There’s a lot of pieces of wood that’s used, that isn’t on the build sheet. Also you don’t say what bolts or lags go where. Maybe a step by step with pictures as you add each piece would be better.

@tswwoodworking 7 ай бұрын

Thanks Josh, All the straight square parts are in list on first page. All the parts with curves are on the template pages to cut out, which also show bolt hole placement. Lag screws are the only odd hardware that I show at about 11:15. Hope that helps!