Building a Jumping Robot Part 1

Рет қаралды 16,211

4 жыл бұрын

In this new series I will try to build jumping robot.
Here you can download all files
cults3d.com/en/3d-model/gadge...
www.thingiverse.com/thing:456...
If you have any questions
Basementcreationsemail@gmail.com
Check out the second version
• Building a Jumping Rob...
cults3d.com/en/3d-model/gadge...
www.thingiverse.com/thing:497...

Пікірлер: 32

@TheGeorgevt 3 жыл бұрын

warn us on the sound when it hits the bottle please.

@rachitjasoria9041 3 жыл бұрын

my heart come in my mouth!! That plastic bottle hit sounded more like a gun shot!!

@higaddrip2583 2 жыл бұрын

Same 😂

@rachitjasoria9041 2 жыл бұрын

@@higaddrip2583 😂😂

@ishigamiyu1991 Жыл бұрын

man you really have the exact motive and intentions for making this project as me

@ericlotze7724 2 жыл бұрын

Just found your channel, and you seem to have some amazing stuff! In case you need *more* ideas on your plate you could make either another spring version, or a gas piston (and co2 cartrige maybe) powered one with the same (or better!) capabilities as Boston Dynamic's "Sand Flea"

@BasementCreationsChannel 2 жыл бұрын

Thanks! I am currently working on the second version of the jumping robot and it uses more powerful ASG springs but thanks for the ideas.Gas powered jump mechanism probably would have much more power than springs so that is something I might consider making in the future.

@ephsonguakro4583 3 жыл бұрын

Amazing rig!!

@panzeritino 3 жыл бұрын

04:30 screamer, lol

@MrPudimB 3 жыл бұрын

Awesome!!

@leoponce82ponce 3 жыл бұрын

waiting for part 2 :D

@neutronenstern. 2 жыл бұрын

6:12 pooooooo Shocked me pretty well with my headphones on. Gosh

@penglu7463 Жыл бұрын

cool !

@4sfactor555 2 жыл бұрын

Love Ur Work, New Subs for sure👍🌟

@michael-hl1cj 3 жыл бұрын

wow nice

@Mahesh-rj8bo 3 жыл бұрын

Thanks Bai 🙏🏻🙏🙏 I am indian

@ChazMations 3 жыл бұрын

Cool!

@amardanialadlanhidayah8454 3 жыл бұрын

Subscribed, can't wait to make one during semester break

@BasementCreationsChannel 3 жыл бұрын

Thanks! I am currently making a video about the second version of this mechanism and it should have much more power. You can check my Instagram to see how the new design looks.

@amardanialadlanhidayah8454 3 жыл бұрын

@@BasementCreationsChannel Sure thing, keep it up 👍👍✨

@cenonlumabadiii8976 2 жыл бұрын

Nice project! May i know where did you get the springs and metal stick you used? Thanks

@BasementCreationsChannel 2 жыл бұрын

Well I bought those 3mm metal rods from some construction shop but you can get them online as well. And the springs are actually from an old toy monster truck (dimensions are on my Thingiverse).

@cenonlumabadiii8976 2 жыл бұрын

@@BasementCreationsChannel Thank you for the response. Its really hard to find specific mechanical parts

@higaddrip2583 2 жыл бұрын

May I ask what kind of torque the motor will need to handle when tightening the spring? I have a competition at my school with a limited budget for motors etc, and was wondering if I’d need a hefty and expensive motor for this. Great video anyways!

@BasementCreationsChannel 2 жыл бұрын

Hi and thanks! The motor that I used is a small N20 6V motor with a reduction ratio of 60:1. It isn't the strongest in its class as it has a rated torque(kg-cm) of about 0.65. It is only able to compress those springs because of the 3D printed gearbox which greatly increases its torque at the cost of drastically lowering the speed. Overall I think that this solution is quite good as it is low on weight which couldn't be achieved by using bigger and heavier DC motor. So if you have a 3D printer I would recommend getting the same N20 motor but with higher reduction ratio (something like 250:1 which is equal to about 3 kg*cm of torque) or modifying a servo like I did in the second version and later adding some 3D printed gears to increase the torque according your needs. There is no need to use big and expensive DC motors.

@higaddrip2583 2 жыл бұрын

@@BasementCreationsChannel alright sounds good man 👌 Thank you!

@feddejorritsma5076 3 жыл бұрын

Nice project man! did you actually continue developing it?

@BasementCreationsChannel 3 жыл бұрын

Thanks! Currently I am working on a different project but I have already bought parts for the second version of the jumping robot so you can expect another video about it in the near future

@omegadycu2909 3 жыл бұрын

Esta genial , pd acaso insultaste en español en un momento del vídeo? Haha

@nischalnaik230 3 жыл бұрын

Can you make a rubberband powered version pls

@BasementCreationsChannel 3 жыл бұрын

I think that rubber bands could be used in a similar project but right now I am working on the second version of this jump mechanism and it uses ASG springs so I am not really planning to use anything else.

@nischalnaik230 3 жыл бұрын

@@BasementCreationsChannel can you pls make your next mechanism with less 3d printed parts so that its cheaper to make via a 3d printing service .btw love from India ♥️