This book is a comprehensive guide for anyone who wants to build a second unit on their property. kzfaq.infoUgkxzaRUJNcbypw-fRBDbqqz43ULIa-1EGP- It showcases various types of houses, such as garage apartments, with photos, videos, and floor plans. The book provides the square footage and the dimensions of each house, as well as the option to order the plans or customize them according to your preferences. You can choose from a range of styles, from ultra modern to cottages and A frame lake houses. The book also offers suggestions for sheds, pool houses, and office studio buildings. This book is an ideal resource for the aspiring home designer.
@dylanmcdonald77654 жыл бұрын
I have seen several metal buildings over the years and you kill it with the details dude. I don’t know if others are just sloppy or lazy, but your attention to details really gives the building a superior professional advantage.
@spoils28732 жыл бұрын
Look up Morton buildings if you want top of the line
@wilkinsoncarpentry62784 жыл бұрын
20 years building houses , you’re easily the neatest roofer I’ve ever seen man , unbelievable how neat
@nicomaisuradze508 Жыл бұрын
I read the entire Ryan’s kzfaq.infoUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 Plans and was able to make a shed plan. Using Ryan’s Shed Plans alone, the shed itself is great. Where I wish I knew more is with respect to ground preparation and foundations. Maybe that's beyond the scope of Ryan’s Shed Plans.
@jeffreycollins72974 жыл бұрын
Love seeing your attention to detail and your willingness to go the extra inch for quality. It's all in the details.
@burtreynolds31434 жыл бұрын
Gable end trims came together NICE at those peaks. Had to watch those on repeat about 10 times each.
@astrobytes7774 жыл бұрын
You never miss anything......well not very often, LOL! Never get tired of watching your quality work!
@silviasteeve4 жыл бұрын
Thanks for all the videos. As someone in the market for a new shop/garage, gives a lot of info on things we need to look for in a good builder and some of the things wouldn't have even thought of on our end if we're doing part of the build.
@TonyT-lo2sz4 жыл бұрын
Good to have you back building your shops. 1st time seeing your critter defence solution.
@michaelcavin54474 жыл бұрын
Love all the extra thought and detail that you incorporate.
@davidbray65154 жыл бұрын
6k views and it should be 6k likes absolute perfection as always its really nice to see someone that doesn't just talk the talk
@RRBuildings4 жыл бұрын
Thanks David
@lucanos64 жыл бұрын
I dont know why, but, seeing Greg sliding down the roof steel always bring a smile to my face. Greeting from Bolivia.
@deanbarr57404 жыл бұрын
Wow you all do super nice work. Neat and everything is in order. I like these metal structures. Hopefully I'll get me one for a tractor barn and implements storage. I like them being rodent free. Thats awesome.
@sntgchns4 жыл бұрын
everyday better, thanks for the videos Kyle!
@rufustoad1 Жыл бұрын
Dang I have been watching all your vids and trying to learn. Doing my first metal job next week and a little nervous but it's for myself so I won't get fired if I screw up
@keithgrey3 жыл бұрын
Love watching you guys work,,,the attention to detail calms my OCD,,,,,plus I get the near Aspergers obsession with math too,,,,my wife gets to LOL at me weekly over these traits,,,,
@djscotty064 жыл бұрын
Love the details and the forward planning you put into the Job Kyle. Good Job on the roof Greg. 👍
@kickit594 жыл бұрын
Kyle excellent progress on the large garage! I am looking forward to the next video!
@paulhaworth18244 жыл бұрын
One thing I always do when augering out holes is to bar a hole with a digging bar 12 to 18 inches deep acts like a pilot hole and let's u dig out rocks etc so not t throw y hole off center believe me it works a treat
@BaconDanish4 жыл бұрын
I love your work and perfection man. All thumbs up.
@cheffsolo77394 жыл бұрын
Great video , and would to see the finish build
@davidrobins40254 жыл бұрын
Satisfying when the job goes well.
@StoneyRidgeFarmer4 жыл бұрын
Really enjoy the videos brotha...thanks so much for showing what you're doing. I'm learning so much!
@sheldonpearo2003 Жыл бұрын
You guys do excellent work and take pride in your work. Great job
@DavidGrassSr4 жыл бұрын
You can't beat team work..looking great ? Texas
@RRBuildings4 жыл бұрын
Agree thanks
@babybry31111 ай бұрын
If you want to truly rodent proof it also needs a galvanized steel flashing attached to the board to keep them from chewing the wood. With almost 9 years doing rodent exclusions the second easiest place for rodents to gain entry is at utility penetrations and ridge vents. We install 1/4" hardware cloth under steel ridge vents to prevent mice rats, flying squirrels, and bats from getting under the ridge vents and dropping down into the attic from the gap at the ridge
@fredscott60223 жыл бұрын
Was a gift and they loved shed
@alexf96454 жыл бұрын
Perfectly, work hard everyday!!!
@silvergrizzly3164 жыл бұрын
All this perfection did wonders for my OCD. 🥴 😁👍👍
@shooky57734 жыл бұрын
That's not what OCD is......
@silvergrizzly3164 жыл бұрын
@@shooky5773 you're a little slow on your commenting, are ya not......you must suffer from constipation of the brain eh? Huh, twat waffle....
@alanflanagan49832 жыл бұрын
Great content. I appreciate you. Just getting started as a contractor.
@manuelve19983 жыл бұрын
You might speed up you squaring routine by buying screw type binders instead of the bear trap style. Plus they are safer to use!
@J-Gx4 жыл бұрын
Good to see the boys tied in!
@peterboissiere96844 жыл бұрын
Very clear
@shanegillespie60144 жыл бұрын
I enjoy learning from your videos. If I were building pole buildings I'd want to do them just as you guys do. One of the best things I believe you do is not put the wood in the ground.
@mraliks14 жыл бұрын
Hi Kyle, it would be awesome if you could make a video on the driver bits you use for various applications of the pole building process. For example what bits do you use for the sheet metal screws that minimize paint coming off the heads?
@spoils28732 жыл бұрын
We use #25 torx bit for out screws so you don’t have to worry about losing paint off the heads
@samchee91784 жыл бұрын
Finally, some work video. Enuff of thm cheap tools.
@fredylopez7633 Жыл бұрын
It is a piece of gold man!!! 👍
@PRACTICALBUSHCRAFTSURVIVAL4 жыл бұрын
Fantastic work as always ...
@lennybivona95344 жыл бұрын
"attention to detail" great to see!!!!
@TheBombson4 жыл бұрын
7:30 would make a great painting
@MJ-iy4fb3 жыл бұрын
It appears you know what you're doing. Nice work!!
@angelmadera22632 жыл бұрын
Enjoying the channel I think this is the way I'm building my house. Cost of course and speed. I'm mostly interior finish carpenter I have no idea of site work were would be best place to learn
@One_Crazy_Dog_Mum4 жыл бұрын
It’s funny how some sounds can be like soothing white noise, strangely I find the sound of the drill and the sound of a moto x race like white noise and I have been known to fall asleep at big moto events here in Australia 🤷🏼♀️ lucky I’m not in the building game or I’d never get anything done. 😂 I might have to do a drill x 4 stroke soundtrack & I’ll get a good nights sleep. 😴
@TheBeerbelly0074 жыл бұрын
Greg is looking more and more like Kyle everyday- ha
@diamondlandeen52762 жыл бұрын
Yes, I like to build a shed. Just Good Job for your opinion .
@rogermontee82643 жыл бұрын
Nice looking roof!!!!!!
@terrygreene38474 жыл бұрын
Very nice job!! Your detail is perfect!!
@SixtyAte4 жыл бұрын
I saw a Seymour S500 industrial post hole digger the other day. I’ve never seen one before. The guy was a fence contractor, said he never dig a hole without one.
@paytonmilliken6825 Жыл бұрын
beautiful place. looks like south dakota
@elnuresedov72044 жыл бұрын
хорошее видео, по больше видео снимай с таким ракурсом с ГоПро)
@josegutierrezb.11544 жыл бұрын
Good job buddy nice videos I have seen all of them
@spoils28732 жыл бұрын
Concrete truck drivers are always some characters
@Shadow-ol2ik4 жыл бұрын
I'm definitely getting one of your buildings
@huntingwithcheney8671 Жыл бұрын
That 3rd guy on the roof literally gets paid to screw off all day 😂
@user-zt8zx9ef8e4 жыл бұрын
Очень хорошо и слаженно работаете. Профессионалы.
@jeremyrussell3464 жыл бұрын
Kyle, do you have any tips or tricks for attaching brackets to piers or slabs that have rough, wavy, or uneven surfaces?
@paulcohut85734 жыл бұрын
Can you make a video of how much it cost to build something like this? Materials +labor. Keep up the good work
@R2Mike4 жыл бұрын
Hes just going to give you a sq foot price. I think between 25 and 50
@MaxMoscow2 жыл бұрын
Спасибо! Вы лучшие!!
@TheDirtyBirchTrails4 жыл бұрын
In the Great White North here we have to put a moisture barrier(dripstop) under the metal roofing so that any moister/sweat from the cold/heat cycles runs down to the soffit and doesn't drip inside the building. Seems cold enough there to warrant the installation?
@Joshua79C4 жыл бұрын
What you mention is a humidity zone related issue.
@TheDirtyBirchTrails4 жыл бұрын
@@Joshua79C Ya regardless, for us up here it's code. My house has it and my garage has it. Every metal building I've built demanded it. Was just asking cause it seems cold enough where he is to warrant it.
@RRBuildings4 жыл бұрын
We install a vapor barrier later on ceiling. Little different.
@ericlundgren33192 жыл бұрын
You guys do great work! Never seen buildings on youtube quite to the grandeure and sheer massive scale like the ones you guys build especially out of wood, just curious what is the largest post frame you guys have done?
@freebird72844 жыл бұрын
you may have covered it before but have you ever used the screws that completely cover the rubber seal? these look like the flat seal type
@danielbuckner21674 жыл бұрын
Your metal work detail always looks damn fine! I would look into who's doing your editing though it looks like they may have a case of terminus abruptess.
@RRBuildings4 жыл бұрын
Well that would be me
@charliehumber63834 жыл бұрын
Roof looks awesome 👍 your gable end trim screws get sunk, backed off, then sunk in all the way?
@danielbuckner21674 жыл бұрын
@@charliehumber6383 I think he does that to pull it tight then backed out so it isn't puckered and snug it up till it looks good with no distortion.
@menjivardanny54 жыл бұрын
Kyle would you do a video of how to metal cap a Bay Window?
@austinrogers67594 жыл бұрын
Hey RR Buildings! High speed, low drag crew. I may have looked at the video wrong, but were the first three screw rows on the roof steel full? Just out of curiosity. We always did full, stitch, full, stitch and so on. Keep up the good work!
@lsellclumanetsolarenergyll50714 жыл бұрын
Cyle question, where you get your Concrete steel brackets from? ABC ? And do I see it right you use 2"*5"*16' boards for your posts?
@lucasbrower46714 жыл бұрын
Hey Kyle love the videos you guys do an awesome job! who do you use to draw / engineer your buildings?
@RRBuildings4 жыл бұрын
Usually no one
@kaywitha95912 жыл бұрын
@@RRBuildings what shoes y’all use?
@rickdegrave74723 жыл бұрын
How do you attach your grade boards on the corners to your columns with the face of the steel plate and also do you use through bolts on them too and just counter sink the heads on the outside so the grade board can sit flush.
@DIRT-BOSS4 жыл бұрын
Very nice
@snazzyusername4 жыл бұрын
Great work as always! Got a question. I'm doing some storage units and am experimenting with doing flat stock over a 32" span. Basically I'm bending each side at 4.5" to trim the door jams and then spanning the distance between each door. So, what are my chances of getting oil canning and how might I prevent it. The metal will be 80" tall.
@robertjock89053 жыл бұрын
When you start your ridge cap Ben 1 inch on a90 so it overlaps your eve trim
@zephyr14084 жыл бұрын
I see you like those “Keen” Boots! I found them last May while reading my trades Magazine; so I grabbed a pair! Wow ! Great comfortable boot! But they feel like a tennis shoe! Anyway great channel Kyle!
@RRBuildings4 жыл бұрын
Yes sir
@hatrick3334 жыл бұрын
zephyr1408 what is the name of those Keens, I’m looking for a comfortable work boot.
@zephyr14084 жыл бұрын
Mine are Keen San Jose boot! I am a custom/finish/cabinet maker on my feet all day doing saw work ect.,. They are the most comfortable boot to date I hv worn! Oh bout $160
@hatrick3334 жыл бұрын
zephyr1408 thanks for the info I’ll check them out.
@aaronbrown7674 жыл бұрын
So how would the gable trim work if the ridge extends an extra foot or two beyond the distance of the soffit edge at the bottom? Obviously the first panel would have an angle cut from the top to the bottom, Potentially across a rib. Just wondering how the trim would fit or would you just omit the trim?
@RS-yj3gn3 жыл бұрын
Roofing iron on without a condensation barrier or foil insulation? Would be unusual in New Zealand where I am. But hey, other countries do things differently. I'm happy to see safety gear being used here and not like a video earlier on this list who performed acrobatics on long ladders...
@tclynn10 Жыл бұрын
I've known super good carpenters and sheet metal workers but they were never the same person!
@billcoley85204 жыл бұрын
ALWAYS START OUR ROOF LEFT TO RIGHT
@kyleowings38422 жыл бұрын
Roof panels are on the wrong lip. The side that has the flat part on the edge goes on top of the one that doesn't.
@traviscoleman63624 жыл бұрын
You don’t need me to tell you this but... nice job!
@DonLemke Жыл бұрын
When it comes to concrete footers. When should someone use a Bell Auger?
@trevorgibson28374 жыл бұрын
putting a metal roof on a garage and a small lean too of one side of it... it has one row of shingles on the garage... am i ok by building a 1x4 structure over it and putting fanfold in the gaps for moisture? planned on using long enough screws to get to the trusses so it never shifts with the shingles
@wazzadog4 жыл бұрын
Im sure this has been asked before, but why don't you screw the top of the sheets/ribs not down in the pans ?? BTW awesome work guys love watching from Australia ;)
@RRBuildings4 жыл бұрын
Manufactures suggested screw pattern
@jonathanescalada15843 жыл бұрын
Won’t air or moisture go into the wall through the small gaps between that bottom board (the one between the inside grade board and outside grade board )and the bolts that go through the brackets and columns?
@gwharton684 жыл бұрын
Watching you guys work makes me want to move to Illinois to live just so you can build me a nice big barn.
@ervinefallis77083 жыл бұрын
Great work and #Expertlevel
@Wroom904 жыл бұрын
Hey, RRbuildings! How deep are the poles in the ground? What is the minimum requirement? How much rebar do you put into the holes?
@Joshua79C4 жыл бұрын
when doing his own concrete he uses the wet set brackets with four welded on pieces of rebar 18 inch long which is all that is needed, there is really no other rebar used since the soil around it keeps it stabilised, compression is the only force being placed upon the concrete
@bigdmed9554 жыл бұрын
Hey dude sorry not watched for a while from here in the UK, just a thought! If the roofing manufacturer supplies a hard rubber 2"x1" X the thickness of the gap between the roof tin and the lath that it suits on (basically the gap that's created by the profile of the v on the roof tin) , thus filling the 20mm gap between the lath and the tin (only on the gap that you will be fixing the fascia with the screw going upwards) of you know what I mean. Then this will stop the force of the screw from making the fascia "pucker" when screwed tight. It's a very simple way to stop that from happening and also let's you screw right up without losing the tightness of puckering. I think you will understand what I mean. If not, message me back and I will get a diagram over to you. As people like me (a contractor) notice the distortion where the screws are fitted, even from the ground, was certain light makes it apparent to the eye, this simple but extremely effective "hack" makes the world of difference. Nice job guys
@John-Adams-Can4 жыл бұрын
Kyle, we are seriously thinking about making a pole barn house (maybe 40 X 60ish and a huge shop to the side). An average house cost about $500K to build in our area for a 1500 sq foot home and you get pretty much nothing for that. We are thinking just basic floors (concrete) and finishing as we go. What do you think a pole barn would cost in general? I believe we are just north of you in Ontario Canada (essex area). Thanks for your channel I have watched you since the beginning and always enjoy it.
@ogle794 жыл бұрын
John Adams man us too! I’m convinced pole barn houses are the way to go!
@John-Adams-Can4 жыл бұрын
@@ogle79 I cannot see ONE disadvantage! I just got a quote for about $20-$25 /square foot for basic shell and floor. The average cost for a normal house here is $300 to $400 /sq foot and that gets you a shell basically that is SO SO SO badly built and a basement that is absolutely guaranteed to flood before you even move in.
@RRBuildings4 жыл бұрын
Geez wish I got 500k for a 1500 square ft post frame
@montanaplease Жыл бұрын
How come sometimes they put that double-sided tape on the gable that connects it to the sheets on the roof and sometimes they don’t?
@michealayala-olivares5462 Жыл бұрын
Just a quick question. Are you able to build a 150x60 building. it will be used as a garage for my car collection as well as my RV. I also want it in several areas, washing area, maint area and then a 2 bedroom apt on one end on the 2nd floor. If you are not able to come to Texas do you have a recommendation of anyone in the Austin area that can?
@terrykeithley61834 жыл бұрын
Hey Kyle, going to need a couple of RR pencils. The one's I planted last year didn't sprout, lol. Another great vid. Terry
@RRBuildings4 жыл бұрын
Haha
@robertshears37933 жыл бұрын
Love your videos and craftsmanship where are you located
@brucegaskill12364 жыл бұрын
Ever tried or thought about using a raise ridge metal roof?
@meradu24 жыл бұрын
Looks like nice work you are doing there How much for a building like that and how much for laborers Thank you Have a bless day
@rossokeefe92682 жыл бұрын
Got any videos of installing a peak box?
@419donny4 жыл бұрын
Why do you use standard binders and not the ratcheting binders? Have you tied the ratchet strap? Just curious
@Jeffrey-Flys4 жыл бұрын
15:33. That still keeps you awake at night, doesn’t it?
@RRBuildings4 жыл бұрын
I’ll have to learn to cope
@officialazizi50994 жыл бұрын
Best
@chrisgrosser40544 жыл бұрын
I may have missed it. What is the little hut by the pool? It looks like plastic.
@MrGtownjake4 жыл бұрын
Seen you use Milwaukee, Makita, and Hitachi (Metabo) drivers....is there one that you lean towards the most?
@samiam74 жыл бұрын
Would you still recommend the floating slab for a "pole barn" house? Would you do anything different than your normal build
@reallyniceguy87844 жыл бұрын
Just wondering why you screw the sheets through the pans and not through the ribs?