This Just In....Newfoundland man clocked at speeds exceeding 150 miles per hour on the TCH in a modified filing cabinet.....details at 5 on 7 action news All jokes aside, Tony this is some of the best use of recycled materials that was ever converted into good as new and in some cases better and thicker than factory original gauge panels, it even comes pre primed/painted, no flash rust or scale to deal with, the idea to go this route is brilliant. Very tidy professional work indeed brother! I bet the trans tunnel is going to be awesome. I had no idea you were planning to take Crusty to the next level I swear Fitzee could build you a Miata if he had enough Maytag's.

A new video from Fitzee is always an instant like even before it starts!!!

Your approach is so logical! No fancy this or that - just making puzzle pieces, tweaking, redoing, tweaking, etc. You are an artist but also an educator. I LOVE your cat at the end!

TEMPLATES!! We don’t need no stinking templates. Amazing work. Keep them coming.

The beads would make some great truck box floor. Looking fantastic.

Great job Tony! Always look forward to your videos. Your one of the best on KZfaq!

You need your own TV series Fitzee I really enjoy your content and look forward to your uploads .Another fine job my good man this cars really shaping up it’s a million miles from where you started 👍

Greetings Fitzee, always enjoy your program. Floor pans are looking good. Have a wonderful evening and stay safe 👍

I love the sound change in the panels as they transition from flat steel to panels with strengthening beads and the turned up edges welded. It SOUNDS stronger. Good job Fitzee, informative as always and no glossing over your minor f-ups, just solutions you didn't expect to need.

You're #1 Fitzee! You've given me the drive & confidence to do these welding projects simply by your demeanour and how you go about explaining it in your videos. Thank you, and please keep sharing what you do with us.

Excellent work as usual. Those beads look like slightly thinner versions of the factory Jaguar floors in the XJ6 and XJS from the late 70s onwards. The indents were filled in with sound deadening foam that always got damp and rusted through! Guess why I know that 😞

It looks amazing Tony. No short cuts and perfect from a speeding horse at 80 mph😂 ❤ Joe

Love the content. Look forward to your videos

Nice fitments on those pan's thumbs up 👍👍👍👍👍

Hi Tony. The floor panels look great! The bead roller does a nice job of turning a plain sheet of steel into something that looks factory.

Trouble is, I think you really enjoy playing with your beautiful new tools 😜

"All measurements". Boy does that bring back memories from my shipyard days. I went through reams of sketchbooks back then. All I used was a tape measure, folding rule, Protractor and a pencil. It worked just fine. Great floor pan project Fitzee. Thanks for bringing us along!

You must have been dreaming about that floor for years. Must be very satisfying to see it come together. Great job!😊

Those floor pans look fantastic. Great tip about the plug welds. Thank You Tony.

Look forward to your videos every week ❤

Awesome love it taking your a dive to make floors for my model a ratrod

It's great to see your creativity. I can tell you are enjoying your bead roller. This is such a neat project.

Nice job Tony. Can't wait to see the Origami you will make for under the seats to accomodate the drops.

I can’t wait to get home from work so I can watch this in full.

awesome, thanks for the video, I need to replace floor pans in my jeep. thanks for the info.

Been a bit since I seen a video from you. Lost most of my favourites after I moved back home. Nice to see you again.

Fitzee When you get those floor pans done and the transmission tunnel and the Trunk you should have The whole area sprayed with bedliner it’ll make it very quiet if you get a company to do it, they’ll do it right it’ll be flawless. It’ll keep the noise down and look really good. You can even get it done in colors When you put carpet down, you could probably leave the tunnel with the bedliner on it mate black it’ll probably look really good that away. It won’t be very hard to lay carpet in it. I wouldn’t spray the roll cage, I’m just talking about the sheet metal on the floor You’re doing a hell of a job you’re working on getting the whole car finished soon 🤓💯👍

Great work !!! After watching this, i realise i need a bead roller tool and and english wheel... Love watching all this !!! Thank you !!!

Great job Tony - those beads are superb, will make installing under-floor heating a breeze...............

Well fitzee, perfect timing for this video I'm really close to doing this on my dart drag car

FITZEE do you know tht you are like a favorite movie ! One never gets bored watching over an over an over Great Job as always Keep Em Coming

Nicely done! I liked the beads that you installed. All the tips were great.

Thanks for Sharing!... Brother. Keep Up the Great Work

I always love to watch amaster craftsman work their trade. You either know what you want and thats the plan, or when things aren’t clicking, you have the experience to just do it and make it happen . Nice job. 👍👍👍

Fitzee, it’s so enjoyable to watch you work. You are a master metal whisperer! Best wishes!!

Tony, those floor pans are turning out really nice. Thanks for sharing. Have a great week.

Hey Fitzee. I love your videos. I have lots to do on my 40 Buick and you are really helping me out. Thanks for sharing your knowledge.👍👍🍁

Excellent work, looks great. I always learn more.

I love watching the welding and grinding it soothing to me

best channel on youtube. no b,s like other channels (10 minutes of talking then all the important stuff speeded up on time lapse ) best wishes from england 👍

Great video , i really like the english wheel treatment . Nice work! Thanks

Taking Shape Tony Nice work

The Toyota rocket is coming along very nice

Hi Fitzee, Great detail work building the floor pans and the firewall. I love watching your show you are a true master craftsman.

Awesome floor panels Fitzee! Thanks for the tips! They tirned out great!

Like your floor boards, thanks. Peanut was happy with less snow it seems as well. Take care Tony. 👍💪✌

Floors are looking awesome ! I love your attention to details !

Awesome Fabrication of the floor pans. Yes the tips were good

LOVE THE CHANNEL INSPIRING AND EDUCATIONAL THANKS FITZEE KEEP UP THE GREAT WORK

Great job as always Tony 👍

Thanks for showing everything. sheared it right off. nutts.

That looks so nice. Can't wait for more.

Nice!!!! I'm about to get into floor pans on the VW. Thank you for another great video!!!

As always ; " Awesome Work " !! 👍👍👍👍👍👍👍

Looks good Tony! I have to do the same thing in my car, thanks for the tips

Awesome man, getting closer to be on the road! Love it

Fabulous work on Crusty...I love that car...very cool street machine!

Nice work once again mate. If you stagger the two step wheels a bit it won't cut, plus it gives you a nice angle on the step.

God gifted you with precision. Good job man

Great stuff always fun watching and leaning from your video's.

Great job ! Always waiting for your next video.

Now you know you can cut sheet steel with your bead roller. Who needs a band saw?

Oh my!! Excellent work Tony! Thank you for your insight and methods!

Those floor pans are terrific, a real credit to you! 👍👍👍👍

Nicely done! Keep up the good work!

Nice job as always...

Lots of time and work goes into.quality work...great video..

As always....great job Tony! Your vids are awesome too....love the channel.

Excellence as always. Thanks Fitzee!!!

Peanut rules 😁 Another super video Fitzee 👍

Tidy work, Tony !

Yes by, that is looking really nice. I like those beads.

Looks great, thanks for sharing Tony 🙂👍

Great job!

this man is to smart for me.

great vid as always

Great job. Thank you.

Very nice. Sturdy. Fit well.

Very good Fitzee.

Phenomenal!!!👌👌👌

Good job!

You are having some fun indeed looks 💯 fitzee.,..🙂👍🙏

Floor pans look great!

Videos as usual very informative

Amazing tony. All i can say is Amazing

Great work Fitzee!!

Well done Tony!!

Super nice and sharp my friend ! !

Awesome thanks for the information and video

Nice job looks good 👍 I love your videos

Nice job Fitz

Looking good

Thing of beauty

I LOVE YOUR VIDEOS...THANKS...

Great video sir thank you for sharing

Any time I’m doing anything with metal these days my mind always goes…….now how would Fitzee go about doing this? Don’t overthink it! 🤣

FACTORY .... right there 👍👍😎👍👍

Great tips for dong a floor pan

Nice!

Hey Fitzee I love that let car it will be cool to see it all done awesome work looks great.