Building Insanely Fast Electric Motorcycle From Scratch / New
Рет қаралды 263,395
Ай бұрынI couldn't find the e-motorcycle I wanted, so I decided to take matters into my own hands: I built my own. Introducing Havoc, a futuristic electric motorcycle designed for both city commuting & off-road adventures!
IMPORTANT!! The following link is a temporary AUDIENCE PREORDER SPECIAL. Once we begin our campaign, all Havoc preorders will be re-directed to Kickstarter. This is an opportunity for our audience to skip the line before the Kickstarter marketing begins.
shop.mysuperebike.com/product...
Audience pre-orders (made via deposit) will be prioritized for immediate production.
Audience Pre-Order Price: $8,400 (including deposit)
If you’re interested or have questions, email Ladi@MySuperEbike.com
Public (post-Kickstarter) Price: $9,600
With instant electric torque and a 75-mile range, Havoc offers 30kW of peak power with zero emissions. Packed with features like a 4kW built-in charger, advanced Nucular controller, and regenerative braking, Havoc provides exhilarating rides with minimal maintenance.
The 91V 60Ah battery has a 4.6kWh capacity and was engineered to endure both rapid charging and high current draw for intense riding. Its built-in 4kW charger fully charges the battery in just 69 minutes. Experience the joy of noise-free rides and instant full power - no engine warm-up needed. Acceleration is from 0-60 mph in 6 seconds!
Subscribe: / @ladiandmargaret
Engineered to be STREET LEGAL in the USA
- Get your Havoc with a license plate, title, and registration for an additional fee at check-out.
- All paperwork and registration are processed through a reliable provider, offering permanent registration for motorcycles. Once registered, your Havoc becomes legally operable nationwide (no in-state inspection is required, and residency in the registration state is not necessary). To maintain permanent registration, simply renew ownership in April each year for a small fee, which we can assist you with.
Registration Benefits:
- Legal Operation: Avoid tickets and legal issues.
- Ownership Protection: Ensures legal compliance and peace of mind while riding.
- Insurance Eligibility: Qualify for insurance coverage.
- Resale Value: Increase the resale value of your e-bike with proper registration and paperwork.
CyberBike: 27kW Peak Power
Favorite CyberBike video: • 27kW DIY Electric Moto...
More Specs: shop.mysuperebike.com/product...
Ebike V5: 17kW Peak Power
Favorite V5 video: • 92V DIY Electric Bike ...
More Specs: shop.mysuperebike.com/product...
Building Insanely Fast Electric Motorcycle From Scratch
I built my own POWERFUL e-Motorcycle
I Didn't Find the E-Motorcycle I Wanted, So I Built My Own
Music by: Epidemic Sound
@Zoey_the_Rat 6 күн бұрын
Finally somebody talking about making a battery that would not even come close to its rated discharge. You're legit the first person i see doing it
@tryaluck Ай бұрын
To stop the pipe from deforming you should fill the pipe with sand. First bung one end of the pipe with some cloth, i use old overalls, just cut them into small pieces then make a ball slightly larger than the bore of the pipe. Then jam the bung into one end, i use a file with the handle taken off, then with dry sand fill the pipe to the brim. Then with a nylon mallet tap the pipe until the sand compacts and the level of the will fall, repeat until you cant get anymore sand into the pipe. then bung the end of the pipe ensuring you get the bung nice and tight, then when you bend the pipe it will almost be like you are bending solid bar. When you are finished bending pull the bungs out and empty out the sand. If you are still getting a little bit of deformation bend the pipe slightly past the angle you want, then secure one end of the pipe in a vice that is attached to a table that is fixed to the floor. Then get a piece of pipe that fits over the tube you are working with to use as a lever, then pull the bend out to the angle you desire. This will pull out some of the deformation, but be careful not to do too much or the tube will deform the other way. Trust me im a pipefitter that has been bending pipe for over 30 years. And if you have the money, buy a bending machine with a mandrel, that goes inside the pipe that prevents deformation. Happy bending.😊
@morkovija Ай бұрын
that is a very good comment, thanks mate!
@user-neo71665 Ай бұрын
Sand or you can freeze water in it but sand is normally cleaner.
@tryaluck Ай бұрын
@@user-neo71665 yes you can freeze water in pipe but it's generally used on small bore pipe, this technique is used when bending brass instruments like trumpets. But it's quite hard to freeze a 6 meter length of 6 inch pipe, you would need a very big freezer. 🙂
@soarer282 Ай бұрын
Just use a mandrel. no time to mess around with sand/ice when it goes into production.
@TheSmokingMustache 29 күн бұрын
Good comment, this is what did to make a custom subframe for an sv650
@frankstocker5475 19 күн бұрын
All the big companies spend millions on R&D. Here you are a one-man band knocking it out of the park. I'm a big believer that what you are doing is the future. Ladi, you are the best.
@jonathanchampagne7683 14 күн бұрын
He's very skilled but I'm many years ahead of everyone, even DARPA.
@-allornothing- 8 күн бұрын
in those millions are also the machines the new companies have to buy.
@mikelambert4492 Ай бұрын
Longer, seat with more padding for our gentlemanly tenders. Definitely sweet design!! It rips!!!
@TonyDWaters Ай бұрын
If there was 6-8 attachment points on each side for the seat, you could have multiple seat & cargo options
@Area51-is6vg Ай бұрын
Without fenders and longer seat and taillight and head light I won't touch that bike. I have Electric scooters .I ride electric scooter everyday to go to work and back home
@ladiandmargaret Ай бұрын
The finished product will ship with fenders, lights, longer seat. We work as fast as we can to make it all happen.
Ай бұрын
@@ladiandmargaretthat's all fine but you can't attach a rear fender off the back of the seat , which limits you to some fender barely above the tire. it will kill the motocross look. that seat is ridiculous . make something with some padding. I like less is more, but you went so minimal it looks incomplete.
@ladiandmargaret Ай бұрын
I was not planning on attaching the fender to the seat. Seat does not have finished cushioning.
@DBRGB Ай бұрын
You are making the bikes we all want and need. And you are correct about people are making e-bikes like petrol bikes. Wrong way to go about it. You are doing it correctly!!! Keep up the great work!!! Thank you.
@SBAaen Ай бұрын
You're so detailed and pragmatic in the process of developing everything you do. The amount research you must have done prior to building must be crazy 😅 I think you found a hole in the market with this one. Electric motorcycle made for taller pople - brilliant!
@moraxlapis1003 Ай бұрын
Hi Ladi! I've been watching you since you started and I really love how you're progressing. I love and support this e-Moto build. Here are the things I would suggest for this specific model: 1. Longer seat 2. Supermoto street tires 3. A modular storage box under the seat which could be used for a lot of things, or an additional modular battery pack in case of emergency. 4. Some signal lights and a headlight would be needed too. I'm rooting for you! Keep up the great work! I hope I can get a unit soon to show my support for your campaign.
@ladiandmargaret Ай бұрын
Thanks! Seat will be extended, supermoto tires tested, the main battery will be replaceable and signal lights mounted in the finished version
@eddiebuckelew 4 күн бұрын
I like the idea of the additional modular battery pack. There's so much space that you could easily double the capacity of the current battery and extend the range even further.
@irvininz1 Ай бұрын
Hey Ladi, congrats on getting the prototype going. Been following the channel over the past few years. Glad to see that you are optaining advanced equipment. That's a sweet plasma table.
@ladiandmargaret Ай бұрын
Thanks so much! It’s a laser cutter. It’s more accurate compared to plasma.
@Harry-lmao Ай бұрын
Pure innovation. Your ideas on this vehicle are inspiring. I wish to be involved in this project. DIY bikes do have their own character (I'm a lil more enthusiastic about choppers). You really know what you got. thumbs up! Keep up the outstanding work.
@johnhosky2931 Ай бұрын
Brilliant. So many people looking for something like this. I’m also 6’2 and sur Ron is like a kids toy for me.
@kasennation2970 11 күн бұрын
real
@MRegoloveJar Ай бұрын
it looks great guys congratulations.
@FSK1138 Ай бұрын
i am 6ft 3 i get you .. i like full matte black body with orange : seat , brake calipers , cables , spring and that small bit of orange above the fork
@iantcroft Ай бұрын
Fit a hugger to stop stones hitting your back. Fit a chain guard incase it snapped. Lower seat slightly and make it bigger, be surprised how many people have short legs and like comfort! Looks great fun!
@ladiandmargaret Ай бұрын
I agree with everything.
@Time-travel-1880 Ай бұрын
Dear Ladi an Margaret, only just found this channel and just wanted to say thank you! this is a really amazing project and I appreciate your thinking and building outside of the normal bike world, who wants normalcy? Sure not me
@quevicular 2 күн бұрын
That bike is mint!!
@toncoumans6985 Ай бұрын
Please, please please more updates. I love your channel.
@sleekitwan 4 күн бұрын
Anecdote related to your intro: I bought a Yamaha motorcycle from this young guy down in Norfolk, England. He’d used brochure pics but also some actual images of his bike. It was a lovely looking thing, cannot recall the name but it was famously equipped with a very stubby exhaust as standard and had a 600cc version. There was no sense of scale however. And literally once I got it, I realised it was 20% smaller all around than I imagined. Tiny. Lovely bike to ride, operated as a single does. So I sympathise.
@CzMpXcZ 7 күн бұрын
To si tak posloucháš a pak slyšíš tyvole :D, a hned ti ten přízvuk dává smysl ! Super video
@TylerDarden-lk5ym 22 күн бұрын
I love seeing stuff like this. This is exactly the kind of thing that the EV world needs custom frames custom batteries to suit the user/rider
@davidjdriver Ай бұрын
I hope the moto manufacturers are watching. Electric motorbikes don't have to be any more complex than this. They don't have to cost more than a few thousand dollars.
@TheMathMax Ай бұрын
this is awesome! im very interested in this! congrats you guys did an amazing job!
@St.Nick311 9 күн бұрын
Beautiful! From an ex motocross guy. Made me want to ride again. Thank you, Sir.
@gomxproductions Ай бұрын
your are truly inspiring ladi, keep up the good work
@Gallardo6669 Ай бұрын
Awesome. Best approach and attitude to "steer up" the market!
@the_omg3242 7 күн бұрын
For the production model, you're obviously going to want fenders. Also, would getting mud caked onto the fins of the controller module be a problem. Cause with that sticking out of the bottom of the battery box it's going to happen. You'd probably also want to extend the seat. There will be times when riders want to duck down a bit and that usually involves sliding your butt back on the seat so your throat isn't right over the handlebars. (passing cars on a road or trails with low hanging branches would be 2 examples) Other than minor details that's a VERY nice bike you've built. Like a couple of other people have suggested, powder coating would be the way to go. It's very durable and looks good. I'd go with a bright color contrast. Black/yellow or Black orange so it gets noticed and talked about. (more sales) Maybe black for the frame and yellow or orange for the seat frame, fenders, and a nice bright graphic for the sides of the battery box.
@Timbodacious Ай бұрын
powdercoat the main frame textured black with bright orange seat tubes or yellow seat tubes. looks nice! Find a way to outsource production in china so your price can be competitive around $6000 usd.
@LostLeftyLimb 8 күн бұрын
This is so awesome you guys. I’m inspired to both build one of my own and buy one of yours.
@michaelbrinks8089 Ай бұрын
Pretty Cool 👍 The space under the seat could be converted into a locking 🔒 storage compartment. Also a removable 🔩 bolt on rear rack could be made & bolted on. To support saddlebags or triple bag storage set. If I had the money to buy one, I'd want some storage ootions,like mentioned above, probably a longer seat & also pedals on it for #1 more stealth to blend in as a bicycle & #2 For the ability to pedal in the event of a breakdown. I'm not at all criticizing the build. Just offering some ideas. I really do like the idea 💡 of a metal locking storage compartment under the seat. Have a tough hinge on 1 side & door cover plate. Oh duh 🤪 I started commenting before watching the end of video about the storage compartment idea 💡
@glfc8954 Ай бұрын
Great job! Love it. Keep it up.
@dronepilot260rc Ай бұрын
This is absolutely amazing! 🎉
@seanlyons2630 16 күн бұрын
They look amazing
@elderlee586 Ай бұрын
Amazing build! Great process. Thanks for sharing. Looking forward to production model becoming available state side. Best wishes and continued success in all your endeavors. Love your channel.
@leeedwards7721 Ай бұрын
SUBBED/LIKED as i always WAIT for your Updates as they are Always Very Interesting. Best wishes from Wales [UK].
@dhoogenraad 18 күн бұрын
holy moly, I want one!!! Love IT
@robertconnors9075 Ай бұрын
Much Respect!!! I've been watching showboating derelicts promoting junk, and giving e-biking a bad image. Your passion is what it should be.
@rebeccanakashima Ай бұрын
Yeah, there's nothing like this out there and it looks so futuristic, so comfortable for taller/larger folks. She's an eye catcher for sure. 🤩
@ladiandmargaret Ай бұрын
Thank you 🙏
@user-jg1bo1eb7z Ай бұрын
Phenomenal build!
@davidschuerhoff7682 Ай бұрын
Really liking this! Your team has the opportunity to radically change this type of transportation!
@demoleon4922 Ай бұрын
Everyone built a E-roller, E-bike, E-motorcycle, but no one built a E-quad , think about it, i can make a payment right now to pre-order one, by the way, of course you made a great work, that way i hope you will start to built a E-quad someday....🍀🍀🍀
@Shawn_fast Ай бұрын
Thats because 4 wheels is two wheels too many! lol
@amped19996 Ай бұрын
lots of e quads
@bad_at_accuracy_ Ай бұрын
Rich Rebuilds made a cyber-quad, not from scratch, but it was cool
@mikayla_collie 29 күн бұрын
like you would actually buy it if he built one... LOL 😅😅
@demoleon4922 29 күн бұрын
@@mikayla_collie of course I will do it...
@ghislainca1 10 күн бұрын
Very good working . on the new bike.very nice...
@bencohen9624 Ай бұрын
Hell yea I love sheet metal work like this so much!
@Barncatfish 25 күн бұрын
I'm in the States, I've built 20 70's era cafe bikes and several ebikes- one of which will do 60mph. My observations: head tube looks a couple degrees too steep for off-road, seat should be 2-3 inches lower, longer, more padded, and have a lip on the back so you don't like, slide off... Like the minimalist design, well executed but nothing novel, strong but heavy all steel construction, the mid drive is better than a 30lb hub motor. You'll need fenders for dirt use and a chain guard to keep from slinging oil up the back of your shirt/jacket. There will always be range anxiety with an emotorcycle, and performance drops with battey voltage. I still prefer ICE motorcycles for rural riding, and fast ebikes for urban use- which we can get away with over here, fortunately.
@drrrw Ай бұрын
This design is really unique! Epic machine. Also a peak at your prototyping ensures the Kickstarter backuping people the assurance of quality. Nice.
@pepetruenos-of8ts 2 күн бұрын
CONGRATULACIONES A BUENA HORA ,SIGUE SOÑANDO Y PONIENDO EN HECHOS ESOS SUEÑOS.
@charifchaud Ай бұрын
Magnifique et Bonne Continuation
@kepa8991 Ай бұрын
I like it. its clean and sleek looks simple
@TheSmokingMustache 29 күн бұрын
One thing i love about your design is you could easily double the battery if desired. In addition, one thing i would love to see in ebikes/motorcycles is more hubcenter steering.
@Suavache Ай бұрын
Top engineers designed an electric car with a great, powerful, sporty look. Thank you for sharing
@Crazyart1974 Ай бұрын
Looks good awesome job my guy.
@Fynn- Ай бұрын
That is a great build man love the bike, posted last before end haha, I wouldn't mind a cyberbike in Canada, also Molle style storage options could be cool. Color scheme I'd say neon electric blue, gunmetal Grey, and Whyte accents would give the cyber to the bike. Best wishes
@trevordavies5793 Ай бұрын
An electric bike that inspires you to want to ride it, brilliant.
@SparkCycleworks 29 күн бұрын
Awesome project!
@mikefranks4528 Ай бұрын
Do it Ladi! Do it! Build and break the barrier!
@dukie1616 Ай бұрын
Seriously smart design! Absolutely the right approach with form following function. And it looks great too. The only thing I’d like to see is big motorcycle shocks (48mm) full size swingarm and Brembro brake calipers with 320mm or bigger discs. Basically full-size motorcycle components. This bike could definitely handle it!
@DirtySixerBikes Ай бұрын
Yes and 21" front and 19" rear wheels!😎
@ladiandmargaret Ай бұрын
It’s not motocross category so I won’t be installing motocross shocks. These brakes are poisonous sharp, no need to change at this point. We currently have installed 21 and 18 wheels.
@dukie1616 Ай бұрын
@@ladiandmargaret Shame that, guess someone else will add the components I spoke of then. Still though, your bike has a superb design. Great work👏 I went ahead and subscribed. Looking forward to seeing what you do next.
@logan-taylor Ай бұрын
this is SICK
@PapaLeeRayandMissy Ай бұрын
I need off road wheelchair badly 😅
@mikegrok 17 күн бұрын
My wife does too, but handlebars are a problem with no hands. Btw no feet either and prosthetic legs which suck off road. Power wheelchair works fine often but gets stuck on 1.5 inch roots.
@heartofodds 27 күн бұрын
Idk, think you could extend the rear wheel a bit, and extend a robust arm above rear wheel for solid mounting of gear. Bring some panels out, recharge while camping, never go home...........come on. Get a strlnk, fish, maybe cross bow-hunt. Find me out there like i'm in my living room, middle of nowhere.
@CrazyManer Ай бұрын
jako vzdycky bomba video 🤘jen bych tam klidne videl nejakou ochranu před spadnutim za sedacku, vzdalenost je tady uz rizikovejsi oproti cyberbiku, pochopitelne clovek s nehodama nepocita, ale sometimes *hit just happens :) kazdopadne looking forward 👌
@terrenceblack3390 18 күн бұрын
I like it! Futuristic cyborg look! Needs more padded seat! I would like that all black with gold outline! Good work gentlemen! 😊
@SandroSGeraldo 29 күн бұрын
very nice project... and this jacket it's so cool
@surronzak8154 4 күн бұрын
The design is sick, I love it over my surron lbx
@alicemoon9008 Ай бұрын
No Comment’s - Great 👍 Job ….. Hi 👋 from Chertanovo Chopper’s Custom Club ….. Moscow City 🌆 ….. Russia 🇷🇺 …..
@zenzen9131 Ай бұрын
Fantastic bike. Matt black with bright red seat bars like a Ducati :)
@jurajbartos9536 Ай бұрын
Teda zíram pánovia ste fakt super rešpekt 👍💪👌
@Ferreira019760 16 сағат бұрын
A café racer version would be cool.
@deziterrell4850 18 күн бұрын
Solid colors
@chaoticadventure Ай бұрын
Absolutely epic job guys I'm 6'4" 280lbs and cannot find a bike that fits me and can haul my weight. I'd gladly review one for you on my channel! I'll even pay for it!
@ericthedesigner 18 күн бұрын
Just saw your email announcement ! You guys are killing it!
@Chris-bn1bn 6 күн бұрын
I hear that dual motors running @ 50% increases acceleration, while consuming far less drain. You know how much faster a battery drains @ full throttle. Anyway, be it front & back, or a mid-drive with a hub combo. Give it a shot! I do like your idea too. I've been thinking the same thing as well. Purpose built to last & not break your croch on a fake gas tank!
@TroyNoon-wn2nv 8 күн бұрын
I like the white, would love to take it with me when camping and just fun around my area.
@RomanLambert Ай бұрын
Awesome video! I just started vanlife myself as well! I’m a personal trainer who lives in his van in south Florida! Definitely love this lifestyle and freedom it brings! I also share videos on my page :)
@YouKaih Ай бұрын
Pěkná práce 👍
@justlu6226 Ай бұрын
Great job..
@Cartergannon98 21 күн бұрын
This is so rad!! One day I want to grow up and be like you 😮 My suggestion would be build a moto edition if you haven’t already. Maybe beef up the suspension & add a rear fender. Something comparable to stark varg but not 14k
@NEVETSTEVEN510 Ай бұрын
Good job looks nice man
@rcninjastudio Ай бұрын
being 6"6' I do wish more manufacturer's would cater for us tall guys, as even though my bomber clone is a big bike I've still had to make custom parts to make it fit me more
@martinpalm5 Ай бұрын
It comes down to weight. The bigger, heavier and faster they become, the less road legal they are in most place. At one point you might as well just buy a motorcycle.
@ladiandmargaret Ай бұрын
This is a motorcycle and it’s street legal in the USA.
@ishaantyagi 9 күн бұрын
Probably a great idea to use those bouncy spring loaded seats on this beautiful machine!
@howardridge1153 Ай бұрын
wow some serious skills there
@npickart Ай бұрын
Looks great Ladi, I got the plans to build the Cyberbike, and began sourcing components but I was at a dead end when I tried sourcing a battery and charger. I live in the US where we have weak 120v single phase residential power. I've even tried to get a local lithium battery manufacturer to build it, but they were not exactly willing to do it. So, I am at the end of my patience trying to get the bike built. Its been almost 2 years and I have since bought another bike to ride in the mean time. Honestly, If I knew more about building a battery, I would do it myself. I just dont know enough to build it myself. Perhaps if I had a diagram of the battery cell layout and where to spot weld the nickel strips I might just do that. But as of now, i have given up.
@ladiandmargaret Ай бұрын
We ship batteries to the states. Our chargers work on 120v grid as well, just charge half the speed.
@Ray88G Ай бұрын
Very cool build . You got a new subscriber .
@Jason01Adana Ай бұрын
i love your work please keep up the good work !!!!!!!!!!!
@auroraRealms Ай бұрын
Light Blue with Orange hightlights, definitly. Gulf Racing Colors. Also, if there is a way to make the batteries ultra-quick change that would be better. For saftey reasons. In case of a battery fire, you want to be able to quickly remove the battery from the bike, so only the battery burns. Another option is to add temperature sensors to the batteries, that turn off the machine when the batteries overheat. However, nothing will stop a battery fire in the case of a battery puncture.
@1111111111202 27 күн бұрын
amazing!
@applechili2848 Ай бұрын
You make some awesome creations. This is no exception. I’d incorporate a longer seat option, motor, battery & controller cooling. Technology is advancing to now incorporate mechanical gears & ABS. I say this, because in addition to pioneering a new design framework, you may as well pioneer what is truly capable given our knowledge & tools of today’s time. Great products & vision, looking forward to seeing more.
@ladiandmargaret Ай бұрын
Thank, the battery is overkill and the motor as well. So far we did not even reach temperature close to overheating or causing any issues. We have few ideas for ventilation but I hope we can avoid extra complications and components prone to failure.
@DanielChambers-ux3wq 7 күн бұрын
I like that the battery is in the lower part of the frame giving you a lower center of gravity for cornering however all that empty space underneath the seat could easily be an extra 50 to 70 miles of range making it a better daily commuter or longer rides but regardless of my opinion it's a beautiful creation that I wish was more my size because I'm only 5'7" but I do need to know what is the final cost?
@deanagewasteland6658 Ай бұрын
Very cool!!!
@gefginn3699 Ай бұрын
I've been waiting for this video !! Love love love the look of this one !!
@mraidymaddful Ай бұрын
OMG, how long has it been since I watched a Ladi & Margaret video. It must be a while as you have staff and lots of new machinery and equipment. I have been watching your channel for quite a few years now and it is great to see how you've progressed and how the business has grown. I am an old boy now (61) so it probably wouldn't be a good idea for me to ride a hyper fast e-bike/motorbike because if i come off it, it would be a bit painful. I know, I had a motorbike accident 2 years ago and it still hurts now. As a semi retired Product Designer I am always seeing ways to change and improve products. I was thinking, at some stage, you could perhaps change the geometry of the foot pegs by mounting them to movable L-shaped brackets; or something similar, so the height can be altered for taller or shorter riders. Also, if the seat assembly could be placed on a slidable rail the geometry of the top half of the vehicle could be altered for all ranges of human sizes. With speed restrictions, the bikes could be made available to younger people. Just a few ideas for you guys to mull over, hope it helps...........
@shaner.5 Ай бұрын
You dont paint it, you powder coat it when its done.
@davidh9653 Ай бұрын
Yes and no, in the racing and frame building industry it is argued about. Yes powder coating is amazing protection but the layer it forms on the outside can hide any cracks that may form in the metal. I think builders preference based on amount of abuse frame will take.
@TeamStevers Ай бұрын
In my experience any cracks in welding joints show in the powder coat.
@wayne7521 Ай бұрын
@@TeamSteversdependant on how thick or flexible the powder coat maybe ... the crack may become fatal ... before it shows through
@Turbogto_guy Ай бұрын
Paint is better than powder coat.
@Jozavenue 17 күн бұрын
I told you agree powder coating good peel off no matter how good the protection is underneath@@Turbogto_guy
@peterparsons7141 Ай бұрын
Green ! …. British racing green. A customizable set of decals,or automotive WRAP materials so user can put whatever lipstick you want.
@hannesaltenfelder4302 17 күн бұрын
I'd paint the silver areas golden while maintaining the black parts black and call it the e-wolf.🐺
@LongNeck277 Ай бұрын
I would buy one immediately if the optional painted components had a nice anaglyph design and paint job. Also if you implemented camo designs or even just earthy tone colours and shades to fit the sustainable approach (because it’s all electric) you will be tapping into a huge environmentally friendly market and audience 👏 needless to say i will support this kickstarter project and keep my eyes peeled for an opportunity to purchase my own bike well done! and thank you!
@user-oj8iv8bw5d 8 күн бұрын
Cool design
@lordofshade 8 күн бұрын
Hi... great project!! Have you ever tried an old trick of plumbers here in Brazil to bend tubes without deforming? sealing the tubes and fill them with sand before bending have a internal pressure and keep the tube from deforming while you bent it slowly
@cognitivedissonancecamp6326 Ай бұрын
I bought a Chinese bike (EUBIKE K7) that I thought would be good for my 5'11" height and the design is very similar to yours - not nearly as powerful due to the import restrictions here and I believe my saddle is way more comfortable than yours but I am AMAZED at how awesome your bike looks. Can I make a suggestion? Instead of painting it, cover it in truck bed liner - here the USA we call it duraliner or rubber guard - nice textured black finish that can take a scuff if you dump it.
@moaly4738 13 күн бұрын
S U P E R travail bravo !!!!
@MrTimmmers Ай бұрын
Nice work, we used to bend tubes by inserting a spring to stop kinking. A laser welder might speed you up while giving good results.
@drzigzag8985 Ай бұрын
Wow very Cool Love the design, maybe have a design contests so people can enter in different color combinations and you can get customer input for it what they would like something like. A downloadable PDF showing the different profiles of the bike and then You can put your own graphics make it all custom. I want one..
@ladiandmargaret Ай бұрын
Great idea!
@toneault7499 Ай бұрын
HI. YOU HAVE HIT THE NAIL SQUARELY ON THE HEAD .. WELL DONE . LOOKING FORWORD TO ALL UPDATES AND SPECS..
@andyupsidedown Ай бұрын
Very cool. I want it with an extra battery and pannier subframe to take from the US to Argentina!
@danielkarlsson1 29 күн бұрын
Hi! Love your content :D I worked as a laser machine operator for 6 years. And I noticed you cutting in a strange order. Always do all the internal cutting first and use one cutting profile for that. Then cut out the frame. This is because the holes will not be precisely located if the part drops down onto the support grid (what we call them). Have a second cutting profile linked to the outer contour so when you fine-adjust the diameters of holes, you don't mess with the body. Hope you understand what I tried to explain :D
Anyaischuk LIVE
Рет қаралды 9 МЛН
Marat Oralgazin
Рет қаралды 447 М.
Cam Engineering
Рет қаралды 3,4 МЛН
James Biggar
Рет қаралды 144 М.
rather B welding
Рет қаралды 150 М.