I think you do yourself down. You did a great job, and this is way better than most of the "tutorials" available on KZfaq!

Great video BUT == TIP if you dont have a wooden mallet get a small piece of wood and place it on the end you are banging with a metal hammer

30 years ago I built my first proper set (Driver, 3W 2i-SW) bought all the parts from a company called Golfsmith in Austin, TX. I couldn't afford the Ping Eye 2's so I bought the knock offs. I enjoyed it and seeing people's faces when I would tell them I built them.

I think anyone who loves to tinker will love this video. Nice job mate.

Great tuition James clear and thorough and enjoyable,e to watch. Hope they played well - look forward to seeing them in action and how you altered the lie of each club.

good job James, made it look easy, be interested to see the next steps when setting up lie angle and swing weight.

They look STUNNING. My dream clubs. I have bought two heads recently and am building two 3 irons. I also recently regripped a wedge too. I love it. Great video James, cheers.

Thanks James Great video. Just finished building a 3 iron from components bought on eBay. It was a surprisingly easy process. Mind you, I haven’t hit a ball with it yet! Fingers crosssed.

James great video really enjoyed it actually class to see how club is assembled

Great video, love the content and giving us stuff that might inspire us to do something little different with our own equipment. Thanks James for keeping us interested over the last few weeks.

I just did the same thing!!! I bought a set of Cleveland TA-3 forged iron heads, used some shafts I had in my basement, and am now waiting for the glue to dry. I did spine alignment on these so it will be interesting to see how they feel and play. Best of luck with yours!!

Matching up the lengths using the butt end of the grips was a great move... ... I have a portable gripping station that mounts to a vice .. Bought from GolfWorks here in the US for about $30-$40. Definitely worth it... The grips slide right on with a push on the club head side

Nice vid James, Clubs look cool as blacked out mate, can't wait to see you hit them..... See ya tomorrow

Can’t wait to see you hit these after your finished... looks like you had fun. Great project to inspire other James!

I really enjoy watching your videos, especially the ones that aren't just a review. I find the one like this one really interesting plus with the lock down a little break from what going on thanks

I love the process of club building and badly want to do it myself some day. I think I will begin with “just” learning to regrip my own clubs. This was so fun to watch! Love those MP-33s ! 😀

James , that was excellent. Extremely entertaining. Can’t wait for you to do a vlog with these on course. 😉🏌️⛳️🍻

Good effort. Well done. I build/customise my own too. Glad you mentioned swing weighting at the end :-) I use acetone to clean the ferrules and take of excess epoxy.

Really enjoyed this video. Been thinking about building a couple clubs to play around with and you made it look straightforward.

Great video James, look forward to seeing you game them on the golf course

Really cool what you are doing James and to play golf with them would be legend. Hopefully you will like your creation so much that they stay in your bag for many years to come

Another great vid, James. Been interested in making my own clubs at some point, and this was very helpful.

Got lead tape on my Wilson Staff Tour Blades and these up the swing weight nicely. Yours are 10 grames and get you about 6 to 10 yards extra(on mine at least). Put it lower will get the ball up better and 2 on the wedges makes play around the green a delight.Great video James.

I really enjoyed that! Well done, the clubs look great!

They look awesome!!! Love it!!

Enjoyed the vid James it's good too see how clubs are built

Good job James done a few clubs of my own over the years never had any problems with them saves a little bit of of money 🏌️⛳👍

Great job, entertaining and educational.

Well done James! A great video! Nice bladed clubs! If i find club heads i like, i also would try.... Have fun with the Mizunos and stay healthy

Great video, I've been interested in building clubs lately. You did a better job explaining your way through than some of the how to videos lol

It's 11.30pm, I've just got home after a 14 hour shift and this my friend is the most chilled out vid. Wish you had done all the clubs 😂 they look proper decent. 👍🏻

Great job excellent video...keep up the good work...clubs look awesome

I've just done some Callaway x forged 2009 ,took out some DG S300 which were getting a bit heavy, and replaced them with DG sl . Used the online formula for swingweight and did D1 in 3/4 irons up to D4 on the pw. Not been able to use on the course yet but feel great in the net!

Cant wait to see you test these.

Enjoyed the video again James. I haven't built a club for about 17 years, but memories came back. Mostly fond ones. I'd say you did alright too mate. Love to see a video comparing these to your current model Mizuno irons on the flight sim for accurate data!

That was fascinating content robbo, nice insight into how to build a club. Irons look fantastic 👏

James great job. Interesting to see how that was done.

great video james love watching things like this

Enjoyed that immensely. Need to see them in action.

Good job, they look amazing!!

What did I learn today? That James's new favorite saying is "first port of call". 🤣🤣🤷🏿‍♂️🏌️

love the clubs and your vids, thanks

Great video James, I still game MP33's and had them since new (2003) 4 years ago I sent my off to Roger Morton who is a highly renowned club make and finisher (based in the UK) He re-chromed my entire set of irons, they came out absolutely fantastic. In fact, you would have thought they were brand new

Great job James, enjoyed that. Looking forward to seeing you try them on the course with foxy in tow

Good job James, most club guys (geeks like me) could offer lots of suggestions but you ended up with a good product and for any diy project that's the point. Thank you for providing content during this difficult time by being very creative and always sticking to your promise of a video daily. I think England opened their courses this morning so get out there.

I have MP33 irons! Excellent irons, look amazing when polished!

Great job, James. Very informative.

Thanks James, was thinking about doing club building as a hobby

Looks sickkkkkk, love the blacked out look, I seen a website that refinishes club heads, you could get the heads refinished in black aswel, that would look unreal!!

Fascinating video. Well Done!

I'm building some clubs today as well. Been waiting 2 weeks for my ferrules to come in and they should finally arrive today. Gonna test out some Aerotech FC115 shafts.

On another note, I completely regripped my clubs and the wife's clubs in February, decided to give'er a go, I watched your method, saw a video on using compressed air, which means you can use the clubs immediately after, however I like the idea of regrip in late winter and play in summer... this way you can get some practice in after the season closes with the grips you're used to... Get the wife some new grips for Christmas, buy a new set for yourself, then pop them on after the new year mess... Then get some practice in with the new grips before the season starts.. THAT was the plan.. We know what happened in the new year that put a real downer on that plan... but courses are now open! Great content James! Very nice How-To video you put together. Honestly, you did a great job!

Great job James. Interesting to see you hit them against your current set

Love it wood love to do some thing like this

They look great

That was one hell of a cracking video and I could watch that all day long I hope you do a head to head against your irons 🤞

Nice. They look awesome and I look forward to seeing you hit them. All the best. Play well.

This is really cool! Made me want to build my own irons haha!!

Great video James keep up the good work 👍

Those came out beautiful

Black looks good!!!! Nice project.

great video. love those irons

Good luck with the clubs. You never know they might just be the ones.

Great video I wouldn't mind giving it a go myself

I re gripped my clubs yesterday for the first time it was much easier than I thought it was going to be

Enjoyed that James, irons looks great sir 👍enjoy using them

Way aback when Golf Smith was going strong back in the 80s I built all my own clubs from components. For myself and friends, really enjoyed it. And they did too.

Love the black C-Taper shafts!

Good to see all of your liquid items in the right containers and with the right labels James. 😋

Awesome job!

Great job James

They look great, get them one the golf course ASAP

very good video because i never new how the clubs were actually built

Great stuff pal.🏌️‍♂️👍😁

Crackin job James u made it look so easy. But that hammer last time I seen one of those I got one for Christmas in a tool set when I was 6 years old 🤣🤣. 👌👍

Those look absolutely BOSS!!! WELL DONE I WOULD SAY

They look awesome mate

Great looking clubs

Can’t wait to see you on the purse with these. May have just found my next little project

Should have added tape to top of shaft to stop any s**t getting in & rattling around?

Thank you James

Good video for us geeks! Always good to have some grip tape to fold over the top and stop rubbish going down the shaft

Love it!

Looking good great vid

Look amazing 👏

James, definately do a head to head with these VS your fitted set, on the sim...and on the course when you can get out. I would LOVE to see the diff...if any.

Great video mate

Top tip on the grip tape side of things. Always leave some excess at the top of the shaft to plug the opening. Otherwise dirt can get into the shaft through the pinhole in the top of the grip. Long term your else up with that horrible gritty rattling sound when you move the club.

You are ENTERTAINING as always, James.... the only thing surprising was that you did NOT use "info" from a recent video of yours where you had some flex expert talk in great detail about which side of the shaft is ideal for facing forward based on shafts do not flex the same in any direction. I naturally expected you to use that shaft flex test info in building this set when i seen the title of this vid

Ya they do look good.

That’s the only rub with buying irons blind at auction. Really important to get the loft and lies checked. Keep the irons naked James they look great and stealth especially with the Matt black shafts! Bring back at of memories for me MP 33s😢

Good that James I'd like to see you put them head to head with your mp20's. Are you allowed to use the work studio yet? If so get them on the trackman 😊

Nice job James, the black shafts look pretty smart, but to be honest I think I am more jealous of the shoe collection under your desk!! :-)

Can't wait to do this myself...

James can you do a video where you check the swing weights of these clubs? see how close you got

Enjoyed the video. Did you trim them according to your swing weight? They look awesome!

I'd like to see you do a custom paint fill on those heads. Maybe green to match the bag. Job well done James.

With all that stuck together tissue your misses is gonna think you’ve bin having to much alone time😂😂😂

Golfworks makes awesome heads for DIY sets