Building the Best $2000 Mini-ITX Gaming PC Possible

Рет қаралды 219,548

Күн бұрын

Building the Best $2000 Mini-ITX Gaming PC Possible
▷ MY STORE - shirts, pint glasses & hoodies: paulshardware.net
⇨ Sponsor: Thermaltake Tower 200 Case | buy: geni.us/U7y3Mgs info: bit.ly/TT-T200
⭐ Extra Life Donation info (and to investigate possibly winning this PC) -- linktr.ee/paulshardware
CHARITY LIVE STREAM IS SATURDAY DEC 9 @ 10:00AM PT
► PARTS LIST - $2000 MINI-ITX GAMING PC
CPU
AMD Ryzen 7 7800X3D (8c/16t) - $360
Amazon - geni.us/Y9WONXt | Newegg - bit.ly/3zASi6I
CASE / CPU COOLER / PSU
Cooler Master NR200P Max - $400 - bit.ly/49Spdol
MOTHERBOARD
GIGABYTE B650I AORUS Ultra Mini-ITX - $240 - geni.us/eKZOsq
MEMORY
G.SKILL Flare X5 Series 32GB (2x16GB) DDR5-6000 - $94 - geni.us/6JfSy9v
(I used Corsair Dominator Platinum RGB DDR5 32GB (2x16GB) 6000MHz CL30 w/ AMD EXPO - geni.us/khWPrt)
VIDEO CARD / GPU
PowerColor Hellhound Radeon RX 7900 XT 20 GB - $750 ($730 after MIR, Newegg)
Amazon - geni.us/iji2o | Newegg - bit.ly/3T4aCjA
STORAGE / SSD
Acer FA100 2TB PCIe 3.0x4 M.2 NVME - $88 - bit.ly/3Gj2e8m
or
TeamGroup MP34 2TB PCIe Gen3 M.2 NVME SSD - geni.us/JjRKhD
💰 FULL SIZE ATX PARTS - saves about $300
(swap in for the NR200P Max and B650I AORUS Ultra Motherboard)
CASE - Phanteks Eclipse G300A ATX Case ($40) - bit.ly/46sIOZK
MOTHERBOARD - GIGABYTE B650 Gaming X AX ($160-$185) - geni.us/JX0HDt
CPU COOLER - Thermalright Phantom Spirit 120 SE ($36) - geni.us/IQMpP
POWER SUPPLY - Thermaltake Smart BM3 750W 80+ Bronze ATX 3.0 & PCIE 5.0 Ready Semi-Modular Power Supply ($81) - geni.us/QBBQer
► TIMESTAMPS
0:00 Intro - The $2000 NR200P Build (7800X3D + RX 7900 XT)
1:18 For $2000 you can but an RTX 4090, or this whole PC
2:53 Parts for the Build
6:30 The GIGABYTE B650I AORUS Ultra has some crazy features
10:36 CPU, Memory, SSD Installation
11:43 The Cooler Master NR200P Case Overview
15:17 CPU Cooler Installation and Motherboard Connectors
19:11 Build Montage… nice
20:08 Notes on the Build and A Couple Benchmarks
22:53 Closing Thoughts
Please note that links above may be affiliate links -- clicking them earns me a small commission if you make a purchase and helps support my KZfaq channel. Thank you!
▷ MY STORE - shirts, pint glasses & hoodies: paulshardware.net
▷ SOCIAL
Twitter: @paulhardware
/ paulhardware
Facebook:
/ 195425877329550
Instagram:
/ paulhardware
:::Send Me Stuff:::
Paul's Hardware
P.O. Box 4325
Diamond Bar, CA 91765
► Edited by Joe Aguilar - ShaostylePostProductions
/ joe_editing
Audio file(s) provided by Epidemic Sound
www.epidemicsound.com/

Пікірлер: 360

@itsjustsomeguy. 6 ай бұрын

I love ITX case pricing. I need to spend $150 more on something a quarter of the size, quarter the materials, and a quarter of the airflow.

@daniels4338 6 ай бұрын

They're the barefoot shoes of the diy pc world

@POVwithRC 6 ай бұрын

You already know why though, and you do not actually love the pricing as it sits. Snark harder tho fr fr. Reason: Low volume. Niche uptake. High tooling costs. ITX cases would be a lot cheaper if they moved ATX volume.

@Sheltur_0311 6 ай бұрын

its an economies of scale thing, new outlines/molds, new hardware/mounts, riser cables, not alot of people buying it etc

@FLOODOFSINS 6 ай бұрын

When you buy yourself a mail order bride that's a foot shorter, don't expect to spend any less on the diamond.

@Wetshoelaze 6 ай бұрын

I know they cram a lot more stuff into itx boards but I feel like I’m getting shortchanged with a smaller board compared to matx/atx. I lose two memory slots and maybe a pcie slot but I have to pay more?

@uss_04 6 ай бұрын

Love me some ITX builds. A challenge to build it but they sure look nice

@ChrisM541 6 ай бұрын

They're interesting but not so much a challenge, even in the past (when HDD's had to be used) - you've already committed to small form factor. The only minor consideration is the GPU (on size and performance), but manufacturers already have you covered here. The other consideration is in the CPU+CPU cooler, and there's plenty low profile coolers out there. The big plus today is that you don't need HDD's - the size saving here is significant. Other than that, keep the inside tidy for airflow. Mini ITX is much more of a challenge! But remember, manufacturers have been supplying the 'HTPC build' for years (thus lots of component choices), a build you'd normally keep under your TV in the living room...so needs to be quiet. I've build a fair few over the years. Still, always good to see what can be done today.

@wherearemytesticles 6 ай бұрын

I feel like they are so overrated compared to mATX. There is some really compact mATX cases out there and the components are much cheaper.

@Nespalvotas 6 ай бұрын

This particular unit (NR200P MAX) is one of the easiest to build in. You just have to make sure that your GPU fits.

@i3l4ckskillzz79 3 ай бұрын

And run hot

@EnigmasityGG 6 ай бұрын

I have been running essentially the same exact system for about 8 months now. So, in case any of you are trying to recreate this build, I have the following tips for you: - I‘d suggest swapping out the AIO fans to something a bit more premium. I am using two Be Quiet Silent Wings Pro 4 in the high speed setting. The original Cooler Master fans can be a bit whiny and one of my fans actually had a slight wobble on its motor, which created additional noise - add some 120 mm slim fans to the bottom as intake. Helped dropping my GPU temps to below 68 C at all times - create some custom fan curves, as the standard fan curves on motherboards are way to aggressive for the otherwise fantastic cooling potential of this case

@ShinobiGambu 6 ай бұрын

That's a nice ITX Build. Great job, Paul.

@thorgen_ironside5279 6 ай бұрын

ITX builds are always interesting :) Good content Paul!

@Zalionn 6 ай бұрын

If you want to keep those $300 savings and still go for a small build you can just build in the Sama IM01 case ($59.92). This case is barely bigger than the NR200 and it allows for micro-atx motherboards, full ATX power supplies, big air coolers, and inverted builds. Edit: Also allows for easy inverted builds.

@jak3zera 5 ай бұрын

I have one of the clones of the Sama IM01 (Pichau HX100) with a 5800X3D, RX 6800, ATX non-modular PSU, B450 m-atx and thermalright pa120. All that with the inverted layout (to avoid dust buildup on the bottom of the PC where its harder to clean without moving it) and I couldnt be happier with the case choice

@JamieR 5 ай бұрын

Love what you and Kyle are doing for the kids! ❤🎉 It makes me happy to think of the amount of joy this pc will give a tiny person! Building in the max in a few days myself. Has to be my favourite case, and having triple slot vs the original 2 is a big change.

@adamsteinbacher2629 6 ай бұрын

I love my NR200 build. Worth noting that the NR200 (Non-P or Max) can be had for much less (mine was $20 after sale and rebate). Fits a 280mm AIO just fine and a 4080 FE.

@cometchaser2117 6 ай бұрын

ITX all the way. Higher wife approval factor. 😂

@chunknorris01 6 ай бұрын

So far you are in the lead! Hope you raise all possible for the charity. Happy holidays and Merry Christmas.

@mundaneeve 6 ай бұрын

I wasnt sure how i felt about the case at the beginning but I actually love it! I like that it wont take up much space. Great build!

@RollingSherman505 6 ай бұрын

I love mini-ITX builds! Great job on this one, that case is pretty nice!

@dennissmith1435 6 ай бұрын

Thank you Paul for showcasing builds with AMD GPUs.

@FeuerToifel 6 ай бұрын

nice build. at first i thought all those adapters and dongles are a bad thing. but thinking about it further, it brings all those sometimes huge connectors away from the board so the overall looks at the board is cleaner.

@jhonwayne1003 6 ай бұрын

I bought all this last week case will be here tomorrow and all put together then! Thanks Paul!

@scuphi 6 ай бұрын

Honestly I love this small for factor build duo it having such amazing specs for its size. I cant wait to try and participate in the giveaway and also love what you guys are doing with for the kids and the hospitals!!

@philipthavenius9801 6 ай бұрын

I kinda fell in love with that motherboard, very nice build!

@joelman1989 6 ай бұрын

I’m doing my first PC build with a 2k budget and it will be in the NR200. I’ve got everything but the graphics card. Your video came at the perfect time before I start building

@Fubetuck 6 ай бұрын

Post-it screen captures are the future of in video graphics. Love the ITX build!

@Woodzta 6 ай бұрын

I built in the good old SG13 since the NR200P would be too big for my TV stand (It's a HTPC/emulation build). The build costed around £900 but I did get a couple of good deals. It has a 12100, ROG Strix B660-I - this DDR5 board only costed me £160 at the time. I put in a used 3060 Ti and an SP750 since the SF750 was considerably more expensive. It runs RPCS3 and everything else like a dream and I can watch whatever I like.

@TheThenewdiabolic 6 ай бұрын

Would recommend the 7900xt. Just upgraded to it from a 2080 super last week and everything running buttery smooth. Was gaming on lower settings at 4k/1440p and now running all 4k.

@T.K.9 6 ай бұрын

Low key wanna try this case lol. Love that the cooler and psu is Included. Cause usually, you only end up with the 750w corsair plat which is not cheap too.

@christinaedwards5084 6 ай бұрын

It’s a great case. Especially if you loathe light up unicorn puke. I re-did a lot of the pre-wiring.

@berndkemmereit8252 6 ай бұрын

Great to see Mini ITX. As we moved and my PC is now in the living room, I'm looking for something small.

@LimitlessSpiders 2 ай бұрын

I got the MicroTitan PC on MicroPowerPC and I absolutely love it. Incredible build quality, and super powerful. Probably the best PC I've ever had.

@snoflahke6575 5 ай бұрын

TY for your fundraising and for your giveaways and for your youtube channel. God Bless you and your family.

@nabiljemel2838 3 ай бұрын

I have used the same case for my build, with a ryzen 9 7900 asus gforce 4070 ti tuf and asus stirx mother board, I repleced the AIO fans with Noctua ones and I have added two additional slim fans below the graphic cards. The case is a headache for buidling, specially for connecting fan cables... the space is so tight and any misatke can lead to a lot of rework... the case is not deep enough to accomodate most of 4080 but honesty these cards got riducously huge. Once built this is a master piece, it runs really quite and cool, i find it amazing how much power you can pack in such small form factor. The other main issue I had is that the strix mother board comes with a single cpu and a single chssis fun connection, I wish they diteched the led strip connections for more fan headers, or better off come with a universal connection that can be used for both fans and addressable RGB.

@adil1815 6 ай бұрын

This CPU + GPU combo is so satisfying to see in any build.

@FlareSlayer 5 ай бұрын

6950XT is great with the 7800X3D

@outrage20 5 ай бұрын

lol amd combo is terrible.

@pill-poppingnarcissist 5 ай бұрын

@@BlockButton I've used AMD and Nvidia and I can say without any biases that Nvidia is better in so many ways. But if you're an AMD fanboy and all you care about is price, then go with the cheap trash that AMD pumps out. There's a reason Nvidia is more expensive, because it's a better product and people are willing to pay more for it. Their drivers and software are unstable and not good for gamers. Big tech youtubers won't tell you this because they are being paid by sponsors/aren't actual gamers (like me). I have built many computers with every brand, my last build was 4090 + 13900k and I haven't looked back.

@Max-Attacks 5 ай бұрын

Love the Beard Paul! Reminds me of a young George Clooney!

@Ruiso7 6 ай бұрын

This case is so good. Love the build.

@greenman8 6 ай бұрын

@ 16:30 ish, speaking of those manufacturer plastic clips- the tension screw holds the Cooler to the CPU, I had the clips of those break, using factory AMD cooler, on my 2nd PC, a Phenom2. Luckily the CPU shut down during POST- and my solution was to lay my PC on its side and let gravity hold the cooler down, until I found a replacement clip at FRY's Electronics (This was before 2010) Ever since then one of the features I look for in an AIO is having a 4 post hold down (not a stirrup using tension)

@morenoise8086 6 ай бұрын

I was not familiar with that case, but it looked really badass to me. I will definitely be looking out for a v2

@JoeMaranophotography 5 ай бұрын

Im running an i5 13500 and RTX 4070ti in mine and its awesome! Think the highest ive seen the cpu go is like 60 degrees with Asus power limits and gpu is usually around 60 degrees or less. I have undervolted and increased gpu fanspeed to 48% though and have bottom fans as exhaust.

@michaelthompson9798 6 ай бұрын

I love ALL my ITX and SFF ITX builds 🥰💪🤩👍! As an NR200 (non-P) owner, I can attest as the cooling effectiveness of this case, even with a Ryzen 9 5900x and RTX3080Ti setup …. even with a 280mm AIO for the cpu and the standard fan cooler for the GPU 🤯🤩. Cooler Master, I agree, should release an updated model with USB-C front panel connector on the case.

@younghentaii1772 6 ай бұрын

amazing build keep up the hard work

@subtanx 6 ай бұрын

Nice build!

@RS3NDIT 5 ай бұрын

I actually have my build in a totally unnecessary H710i and when I upgrade my mobo/CPU/RAM in a year or two to match the red devil 7900 XTX I just got, I'm HEAVILY considering moving to an ITX case. It'll be more of a challenge than fitting the system into a massive case like the one I have but the compact layout and the portability are massively appealing to me.

@3thikz 6 ай бұрын

Fair warning for anyone building one for themselves, Gigabyte boards are notorious for having VRM whine

@guntherultraboltnovacrunch5248 5 ай бұрын

The part of the build that is most mysterious to me is setting the pc up after assembling it. Are partitions still a thing? What settings in the bios do I need to concern myself with? Do I need to check my ram timings? Stuff like that.

@rickgeller6043 6 ай бұрын

This was quite a big build for such a small case. I'm liking it.

@QuB3 2 ай бұрын

I love these detailed build vids ❤

@davekerby9020 6 ай бұрын

I enjoyed the rant/discussion of the cooler install, did a build recently using one and those connectors caused my choice of language to deteriorate rapidly...

@TheBand1211 6 ай бұрын

Been thinking of transforming my old AM4 setup into a sff build to attach to my tv for solo campaign games instead of console. These just look so cool man.

@MrMcGreed 6 ай бұрын

16:59 - "we're either almost done, or we still have a lot of work to do" 😂😅 - sounds like my life! Thanks for another great video Paul and Joe ❤

@phoenix0153 6 ай бұрын

Thats a great idea for a pc build: for the price of a 4090... especially with all the drama going on with China and the scalper situation.

@justatim8143 6 ай бұрын

For a ITX case it is well thought out except for the top which is exhaust and their top cover looks like it will not allow much air to go through. On all their filters they should have used a Fine mesh for better air flow.

@JoshBoy2439 6 ай бұрын

Looks clean!

@Tripp-hq 6 ай бұрын

Yes no RGB lol That build was awesome! I was looking into doing an ITX build next. I'm currently still on AM4 with 5000 series.

@M_Chu 6 ай бұрын

Seeing these new gen builds are crazy! I'm still here with my nvidia1070 and intel i5-7600 haha.

@atiratiki3072 6 ай бұрын

Thats a fantastic build i wanted to donate but it Christmas timing an on a budget i like supporting ya!!!

@DaRealPielover1987 5 ай бұрын

I just built this today and one thing that tripped me up was the PSU Power Switch. It is located on the PSU (top side) and inaccessible from the outside of the case.

@MegaManNeo 6 ай бұрын

I have the NR200P myself, however, I have the Liquid Freezer II 240 in place for the AIO. Works really well albeit it's probably overkill for the 5600G I actually intended as stopgap for until the 5800X3D drops in price. Oh well, it's a nice case anyway and probably one of my favorite ITX cases in general.

@dallus-pallus 5 ай бұрын

Thank for this video. We're do you plug the aio pump and the cpu fan on this motherboard please?

@RenatsMC1 6 ай бұрын

Love ITX builds

@airman_85uk 6 ай бұрын

I would either go ITX to strap it under my sit-stand desk or have a rack mounted gaming pc on top of my rack mounted NAS :D Great build!

@lanceripplinger8352 6 ай бұрын

Always a good day when Paul uploads a new video!

@michaelthompson9798 6 ай бұрын

ITX has been my go to form factor for over a decade now a I’m happy to pay a small premium for this for factor as I love having more desk space with a tiny case than no desk space with a massive pc case that offers no benefit to users other than data hoarders or steamers etc who need massive amounts of storage ….. but then again most storage needs can be satisfied with a high capacity small sized NAS or storage server.

@DuncSargent 6 ай бұрын

I'd like to see a NO RGB build. Maybe a video of how to turn off all RGB (video card, motherboard, fans, memory). I want it dark at night! Thanks Paul! All hail Paul!

@jeremyschillinger917 6 ай бұрын

I love this build. I really want am itx for the PC in my room.

@jaylowkek3571 5 ай бұрын

great video! Thanks Paul!

@Hydration-yq7hu 6 ай бұрын

I have these exact core components. 7800X3D, 7900XT, and 32GB 6000MT/s CL30. Only difference is I went full ATX and boy is it big, but cheaper actually. Closing thought saying the bigger size is cheaper is actually true because I pieced mine together for just over $1700. SUPER solid components. I would definitely recommend this combo for anybody who's got a bit of experience, or wants to upgrade their system.

@MS07B3-G0UF 4 ай бұрын

Where did you plug in the AIO pump connector? I’m in the process of building my first PC with this very board and I have no clue where I should plug it in

@1fires1 6 ай бұрын

Might do a Mini-ITX build now.

@user-tz5ck1xy5u 6 ай бұрын

My current computer is ITX, but since I used a Thermaltake Core V1, I only had to pay the ITX tax on the MB (offset by buying open box). It's cheap, takes ATX PSUs, and requires no riser cables. It is limited to 92mm CPU coolers, but Thermalright has a nice one under $20. The case is large for ITX, but you can save a lot by using it.

@paulandrada7940 6 ай бұрын

Damn, I wish I had all that hardware! That mini case is ideal for my tiny space room!

@utblades 6 ай бұрын

love the build🌟

@Haze0808 5 ай бұрын

When i do move and leave the ph this is the build ill follow.hope these are still available in canada

@TheProfeshonal 6 ай бұрын

Thank you, ideas for after christmas mini build...

@TrickiHunter 5 ай бұрын

Im a newbie, how is the upgradibility and longevity for a build like this????? tryin to learn thx for any help

@purplerunner1715 6 ай бұрын

Awesome hardware, best of luck to everyone in the draw.

@hjshoon5244 5 ай бұрын

i recently just configured a very very similar build to check the cost for my budgeting purpose - 7800X3D, CM NR200P Max, Corsair Vengeance 32GB DDR5 6000MHz, 2TB Samsung 980Pro, MSI MPG B650I Edge Wifi, MSI 4070 Ti Ventus 3x. Total was SGD 2590 / USD 1950. If i change 4070 Ti to either MSI 4800 Gaming X Trio or Palit 4080 GameRock, it will be SGD 3200 / USD 2400. Still contemplating if i should even build this PC as right now I've XBox Series X with Innocd 27M2V monitor (4K miniled DisplayHDR1000, FALD 1056 dimming zones). If its mostly for gaming, is it worth splurging the money for the PC build or just stick with the xbox? I used to build my own PCs and played with overclocking in my teenage and early 20s age, but that was around 16 years ago since my last build. thoughts by anyone would be appreciated. btw, i'm still waiting for the 4070 Ti Super and 4080 Super to see the performance and if it drops the 4070 Ti or 4080 prices down. If i'm to build the PC, 2024 will likely be the year for it. thanks

@JohnThunder 6 ай бұрын

Great build Paul! Really enjoy these videos! 👍 Imagine that, for the price of a RTX 4090 you can build a great gaming PC.

@lucasrem 6 ай бұрын

who needs that RTX 4090 on older gen hardware ? 4 gaming HP notebooks, or this micro build by Paul, Gen 3 is fast too !

@Kioti44 6 ай бұрын

Really Nice Build Paul !!

@ghyde7798 5 ай бұрын

Love the build would like to build one. Need to use for both gaming and work with Auto CAD and rendering software. Will this mother board hold more that one STORAGE / SSD, I will need 3 slots please advise.

@natemills6220 6 ай бұрын

Do you think you'd ever consider doing a live stream charity event that also was somewhere in California that allowed people to attend in person as well? Could be something casual where people could chat and socialize around while y'all streamed

@Gavrev 6 ай бұрын

Although I've never owned a home brew ITX system I have had a soft spot for the fun of having lots of power in a small form factor. That said, wow that was hella fiddly! I was very concerned that it wasn't going to fit properly with that ITX PSU orientation..

@rgs559 6 ай бұрын

Thank you, Paul! Just what I've been waiting for...👌

@z3ntix 6 ай бұрын

Built my self a ITX build earlier this year. Normaly I use a few hours on a ATX build, but this time I spent almost a whole day 🤣Asus AP201 with 3d printed PSU bracket for Asus Loki 850w and 3d printed anti sag for GPU. Next project is making a template and 3d print or use acrylic sheet to hide the empty space right of motherboard. Almost 1,5cm clearance between PSU and GPU.

@itsdeonlol 6 ай бұрын

Great Mini-ITX Build!

@everythingrc2324 6 ай бұрын

ITX are awesome, Its just tiny things are more expensive. Just like my kids 😂

@jhonwayne1003 5 ай бұрын

PC is built, dual 3.5 Nitro curved monitors! Running WoW and a few other games. The wifi 6 is crazy fast! The dual audio is insane, didn’t know it was even possible.

@Lancelot122 6 ай бұрын

Love the build, kinda my dream setup

@Hurensohnologe0711 6 ай бұрын

Ah, the well deserved NR200P Max. Love it

@kasper_429 6 ай бұрын

Love the case, but they need to do an updated version with the upgrades you mentioned (front panel USB-C, a better/easier mounting solution for the AIO block, etc.). They could easily add USB-C to the front (well, top) panel I/O by moving the power button to the front of the case where the outline logo is, and putting the USB-C port right there in the middle. It would keep that area nice and symmetrical, too. I would love to see them do a slightly larger version of this case (NR400P Max? Lol) that could fit MATX boards and full-width fans in the bottom, as well as including a 1000 watt PSU for people who would want to put a 4090 in there. 850W would be cutting it mighty close, not to mention the PSU isn't ATX 3.0/PCIe Gen 5, meaning no native 12VHPWR cable.

@SpuriousECG 6 ай бұрын

Nice ITX build!

@djstevie69 6 ай бұрын

Love this game, love the team, thank you for the updates. Now I have sine cans to smash open.

@zeldajunkielol2 6 ай бұрын

With my build, I went with an R5 7600x, MSI B650i and MSI 4080 and got the mobo,ram and gpu used from Amazon so I saved a like $220 there. Amazon warehouse deals are great because of how good Amazon's return policy is.

@mrsebsin 5 ай бұрын

Question, will laying the case on its side cause any cooling issues as long as the mobo is on the bottom? I know AIOs can be finicky.

@9eor9ie 5 ай бұрын

If you were to put intake fans at the bottom what size would you go? What would you get?

@Hito343 6 ай бұрын

Those VRM heatsinks look crazy tall, if I would go air, can I even fit dual tower cooler in there?

@TheLordNugget 6 ай бұрын

Well, I just built a new AM5 pc in a full size case. More my style as I like open loop systems. Next build will be a steampunk theme full size build again. I ran an ITX pc while in the corps, but if I ever do that again it will be highly dependent on the case and the purpose of it. I mean, technically I'm going to be working on an ITX rig but it's a NAS so I don't count it.

@JamesTodd 3 ай бұрын

can the fans fit in the bottom with a large gpu like a 4080 super?

@Jay_the_Caffeinator 6 ай бұрын

Awesomesauce video Paul and Joe! I wish the lucky winner enjoyment on this amazing system! Caffeinator out!

@devinseventy8255 6 ай бұрын

Whenever I can afford to build a new PC, I plan on using the NR200. I wanna SFF build for the living room, and the NR200 seems to be among the least complicated cases.

@brianlaunchbury4491 6 ай бұрын

Just built my grandson a mini-itx system, first time in 15years so a little struggle! Used an Asus board with rear nvme socket, doesn't fit a nano torrent!

@Subdubbin 5 ай бұрын

I like me some ITX content. Nice music choices btw 😉

@gaunterodimm3606 6 ай бұрын

My next build will be ITX, possibly in a PCcooler Mini i100 Pro Mesh since I like portability with a handle. The NR200p Max looks like a great quality case though.