Building the Ultimate Super-Powered E-Bike: Bafang 1000w BBSHD Installation Guide

Рет қаралды 52,170

Күн бұрын

4 E-Bike Books
www.amazon.com/gp/product/B0C...
Amazon / Aliexpress BBS 500W
amzn.to/40eDsOd
s.click.aliexpress.com/e/_DFC...
Amazon / BBS Aliexpress BBS 1000W
amzn.to/3UGccqA
s.click.aliexpress.com/e/_DnD...
0:00 Building an electric bicycle
0:18 Double disc brake fork
2:00 Install new forks
3:28 Bafang BBS HD Bafang Motor
4:48 Crank arm
5:18 BCD130 chainring
5:33 chain
6:24 Shimano crank arms
6:46 Pedal
7:13 Speed hall sensor installation
7:59 Create a chain drop prevention guide
10:11 connector
11:06 Magnet power cut-off sensor
13:29 Battery Mount Adapter
15:32 LED light
16:46 XT60 connector
17:45 Tail light power cable work
19:07 Taillight clamp DIY
19:57 Bluetooth monitor
Congratulations on completion
⚡ Latest Featured Products Checklist / Amazon, Aliexpress. Coupang
Recommended tools for beginners
cafe.naver.com/tgenter/708
Tires, tubes, spokes, wheels, rims, hubs
cafe.naver.com/tgenter/705
Bike Frame + Motor / Fork & Rear Shock
cafe.naver.com/tgenter/712
Batteries & Related Products BMS Repair Inspection Tool Bufoam
cafe.naver.com/tgenter/700
Battery Pack DIY Holder, Nickel Sheet Parts
cafe.naver.com/tgenter/764
Bafang / TSDZ Central Motor Tuning Repair Parts
cafe.naver.com/tgenter/717
20 inch electric bike tuning parts
cafe.naver.com/tgenter/977
Hub motor/controller/repair fabrication parts
cafe.naver.com/tgenter/716
Brakes, pads, maintenance tools, fabrication tools
cafe.naver.com/tgenter/698
Throttle / chain / cable / hanger / derailleur / oil / maintenance car wash
cafe.naver.com/tgenter/713
headlight
cafe.naver.com/tgenter/748
tail light
cafe.naver.com/tgenter/746
switch
cafe.naver.com/tgenter/747
Phone Charging USB Convenience Device / LED Tuning Dress Up
cafe.naver.com/tgenter/703
Luggage carrier, suitcase, courier bag
cafe.naver.com/tgenter/719
Goggles / Helmet / Gloves / Taillight / Audio Speaker / Locating Tag
cafe.naver.com/tgenter/699
Transmission Drivetrain/ Electric Bicycle/ MTB/ Minivelo
cafe.naver.com/tgenter/766
Road bike shifting and drivetrain
cafe.naver.com/tgenter/752
Fat Bike, Retro Super 73 Fat Bike
cafe.naver.com/tgenter/1100
MTB. Road Bike Handlebar/Stem Collection
cafe.naver.com/tgenter/796
Suspension Seatpost, Adjustable Seatpost, Saddle
cafe.naver.com/tgenter/798
Pedals / Cleats Pedals / Cleats Pedals Adapters
cafe.naver.com/tgenter/799
Brompton / Minivelo Project Parts
cafe.naver.com/tgenter/750
For battery builders
cafe.naver.com/tgenter/764
Children's bike, baby seat, helmet. Supplies
cafe.naver.com/tgenter/814
Alton / Prarello domestic finished vehicle battery
cafe.naver.com/tgenter/704
Kids/Bikes/Sports Play Goods
cafe.naver.com/tgenter/814
Living & IT Review
cafe.naver.com/tgenter/701
E-BIKE BOOKS
Amazon Kindle / English Ver.
amzn.to/3M5eyJZ

Пікірлер: 88

@Mobilant_US Жыл бұрын

E-Bike Guide 4 Books www.amazon.com/gp/product/B0C158WW7H?ref_=dbs_p_mng_rwt_ser_shvlr&storeType=ebooks 2023 Frame s.click.aliexpress.com/e/_DFvJoqp

@davidfuller764 7 ай бұрын

Son, you’ve got mad skills!

@howardridge1153 Жыл бұрын

love it when everything is done correctly using the correct tools, nice build btw.

@diyathomevn 6 ай бұрын

I LOVE this new direction you are going!!! And I'm SUPER HAPPY that you took the project from start to finish.. This looks amazing, what an amazing transformation, . Hope you continue to make videos like this about machines and technology that you usually have. Well done, the car is solid and has a lot of tangled wires. I'm planning to build a 3000w car that runs very strong

@desertweasel6965 Жыл бұрын

Well, it took me 5hrs, but I got my 1000w onto my bike and everything works PERFECT. This bike is so fast it is scary and I haven't even messed with the programming, yet. I need a programming cord but can't find one and an OTG cord for my phone so I can reprogram from my phone. I am so glad that everything worked out.

@Mobilant_US Жыл бұрын

congratulations. That's awesome. Good brakes are recommended.

@mikethomas6051 7 ай бұрын

The programming cable is widely available online, not sure you will find one that works off a phone but you can skip all that with the eggrider v2, its a display with on the fly settings that you can change the same way

@heraldreichel1971 Жыл бұрын

Thanks for sharing. There are some good videos about installing the BBSHD on youtube, but this is the most comprehensive one yet.

@Mobilant_US Жыл бұрын

Thank you so much for your kind comments.

@mrkeopele Жыл бұрын

good job on the chain lift off preventor!

@Mobilant_US Жыл бұрын

Thank you~

@darrencorbett9883 Жыл бұрын

Looks great

@seo6265 7 ай бұрын

Anazing built. I love to have 1 ❤❤❤

@mikethomas6051 11 ай бұрын

Erm you shouldn't have the motor at that angle, its practically vertical, you should push it up against the bottom tube, chain size is wrong as well, either chain size is wrong or you've over tensioned...

@Mobilant_US 11 ай бұрын

Thank you for your comments.. The motor is tightly packed into the downtube position. Except for special circumstances, it is an environment in which the motor cannot hit. The chain length is within the allowable range of the rear derailleur.

@CoolCityCycling 9 ай бұрын

The headlights should be mounted on the center of the front frame that doesn't move with turning the handlebars. That's how I mounted mines. That way the headlights don't jerk around and become a distraction for drivers and they move with the sway of the bike move fluid. Don't know why people haven't caught on to mounting headlights that way for bikes. That's the way it's done for many motorcycles.

@Mobilant_US 9 ай бұрын

The technology to move the headlights in the direction of cornering exists in automobiles and older kawasicle motorcycles. It is most advantageous to move the headlamp in the same direction as the helmet.

@davidfuller764 7 ай бұрын

@@Mobilant_USyes, plus I want cars to see me! Distracting drivers with headlamp = safety.

@stevo184 Жыл бұрын

It was looking good until the hideous chain protector😂

@Mobilant_US Жыл бұрын

Thank you

@fistouille23 Жыл бұрын

haha same, i was like let me buy u a 3d printer

@chrisoliver5911 Жыл бұрын

Awesome job putting this bike together. Best install video of the Bafang motors I've seen yet. I did my install before I saw this and am having nightmare issues with cable management as all the cables are 2 to 3 times too long. Great job with the soldering. Really interested to know where you got those coils from that you call "cable bands" or "helical ties"? I can't find them anywhere. Can you tell me where you got them from please? Have you got a link?

@Mobilant_US Жыл бұрын

s.click.aliexpress.com/e/_DDeOemH s.click.aliexpress.com/e/_DlpNhf3

@Mobilant_US Жыл бұрын

cafe.naver.com/tgenter/708 If you use the translator function, you can see that all the items are gathered here.

@chrisoliver5911 Жыл бұрын

@@Mobilant_US TPU Spiral Winder - Great, thank you so much! 🙂

@Mobilant_US Жыл бұрын

thank you. I am using it too. I recommend two. with the grip shifter. ( Sram can 10 speeds ) s.click.aliexpress.com/e/_DEW283r Unfortunately, this is only 7th gear. s.click.aliexpress.com/e/_DBPdGtF

@lIlIlIlIlIlIlIlIlI Жыл бұрын

Thank you for making this video and sharing the parts lists. This is really good information. I will buy the parts from your links and built the same bike! Thank you so much!

@Mobilant_US Жыл бұрын

Thank you. 😆

@publicidadeduardocuero1959 Ай бұрын

Hola amigo, tienes el enlace de Aliexpress de la bateria que utilizaste? Saludos desde México 😊

@Mobilant_US Ай бұрын

As for the batteries, I make and use them myself because I do not trust most of the brands from Ala Express. The seller here is known to be trustworthy. thank you s.click.aliexpress.com/e/_DD60cIX

@mrgodzio1750 8 ай бұрын

Hi i have very similar frame in my bike i was wondering if theres any problem with bending back of the frame to right side? I heard that the motor is so paverfull that it can damge frames with cheaper rear suspenion... What do you think about that?

@Mobilant_US 8 ай бұрын

1. I don't know if the frame is bent to the right or not. Do not bend aluminum too much as it will break. 2. Cheap spring suspensions have a lot of shaking because they do not have a rebound damping function. High-end suspensions, especially air suspensions, can adjust the spring pressure with air pressure according to the weight of the motor and battery, resulting in less shaking and excellent driving ability. .

@greenpixel556 14 күн бұрын

i know how to build it , already have one, where can i buy descent samsung or panasonic battery pack ?

@Mobilant_US 13 күн бұрын

www.18650batterystore.com/collections/21700-batteries Unfortunately, I don't know of a cheaper supplier in the US.

@murselincelik4944 4 ай бұрын

İleride bu kit bisikletin mafasallarina problem oluyormuş doğru mu ?

@Mobilant_US 4 ай бұрын

I have ridden a full-suspension 20-inch mini bike for 80,000 km and have never had a problem with the pivot.

@johnriera7455 Жыл бұрын

Donde puedo comprar la bici? El motor ya lo tengo

@Mobilant_US Жыл бұрын

s.click.aliexpress.com/e/_DmJ8tUV qr / ver s.click.aliexpress.com/e/_DcJcnSZ this is new You will need to cut the bash guard adapter. It seems a little tight to install the battery.

@user-fx7uy7vu4m Ай бұрын

Double disc brake how fast this thing going to go

@Mobilant_US Ай бұрын

Braking power is strong. Caliper alignment is very difficult.

@eko-system 5 ай бұрын

Hello, I would like to know the total cost of parts to make this bike excluding motor and battery? I hesitate to do the same... And if you have an accurate list of parts, because the links are not all accurate. Thank you and congratulations for this achievement!!!

@Mobilant_US 5 ай бұрын

It costs about $2000 to $3000 including the motor frame and battery. Excluding the motor and battery, I think I spent about $1,200.

@Hybrid600 Жыл бұрын

What exact model of Shimano crank arms and length?

@Mobilant_US Жыл бұрын

s.click.aliexpress.com/e/_Dmj2nBf s.click.aliexpress.com/e/_DFJTjxn ko.aliexpress.com/item/1005003501827134.html?spm=a2g0o.ppclist.product.18.ce00RSKARSKAD7&pdp_npi=2%40dis%21KRW%21%E2%82%A9%2037%2C518%21%E2%82%A9%2037%2C518%21%21%21%21%21%402101c84b16792044779657221e14dd%2112000026079665448%21btf&_t=pvid%3Adbd3273f-0e40-4a53-bd5a-382a976be10e&afTraceInfo=1005003501827134__pc__pcBridgePPC__xxxxxx__1679204478&gatewayAdapt=glo2kor

@sammiller6631 6 ай бұрын

Grin Tech motors are more powerful than Bafang motors, but they're not as cheap as Bafang.

@Mobilant_US 6 ай бұрын

I love Grin Tech too

@adamnowak8876 10 ай бұрын

Why the front disk breakes are mounted in different directions?

@Mobilant_US 10 ай бұрын

To do the same with motorcycle brakes.

@adamnowak8876 10 ай бұрын

@@Mobilant_US You did not understand me. I mean that the rotor has a certain direction and the one of them was mounted the wrong way,

@Mobilant_US 10 ай бұрын

@@adamnowak8876 These floating rotors are symmetrical. So the direction of rotation does not matter. And even if the floating rotors are installed in reverse, they hardly bend due to the characteristics of aluminum. It was tested on an electric scooter. kzfaq.info/get/bejne/a7JjdLSGmqi1hnk.html

@Mobilant_US 10 ай бұрын

These floating rotors are symmetrical and flat on the left and right front and rear surfaces. s.click.aliexpress.com/e/_DDnqA1n

@Gamez4Breakfast Жыл бұрын

i have the exact bike frame, isn't the motor to close from ground? i want to mount a bafang like this but i was worried when i go a bit offroad maybe the full suspension under my wight will travel to low and maybe touch the ground with the motor. and what battery capacity and voltage is that sir? it fits perfectly there i see

@Mobilant_US Жыл бұрын

Going all the way down to the suspension bottom out doesn't sweep the motor to the ground.. Battery 48v 14Ah . Cross country driving is no problem.

@Gamez4Breakfast Жыл бұрын

@@Mobilant_US any ideea how much range in asisted and/or throtle only?in this configuration.thank you✌️

@Jujubees225 Жыл бұрын

what full suspension bike is that? Where do you get it?

@Mobilant_US Жыл бұрын

@@Jujubees225 2023 s.click.aliexpress.com/e/_De0lVgp

@mikethomas6051 11 ай бұрын

They have installed the position wrong, go check other builds, plus they are using a hollow chain thats not meant for high torque lol

@alex.copilu 9 ай бұрын

Hello 👋 what do you think, a mega shark 52v 25ah battery would fit this frame ? Thank you

@Mobilant_US 9 ай бұрын

Hello👋 This is not known until it is integrated. As a last resort, put it on the top tube. Alternatively, dual batteries are recommended.

@SuperZabojca Жыл бұрын

Why didn't you put second brake caliper?

@Mobilant_US Жыл бұрын

Here kzfaq.info/get/bejne/gb6ibNyHksmtfY0.html

@SuperZabojca Жыл бұрын

@@Mobilant_US I meant in the front.

@mikethomas6051 Жыл бұрын

Because it's for show, stupid fork change for no benefit if not using a dual caliper set up.

@Mobilant_US Жыл бұрын

@@mikethomas6051 That's right. sadly. The seller sent only one brake mount adapter. s.click.aliexpress.com/e/_Dkbnv93

@Mobilant_US Жыл бұрын

@@mikethomas6051So I recently bought this fork. s.click.aliexpress.com/e/_DBvZOIV

@itzpiromane97 Жыл бұрын

Someone can help me? I have a bafang bbshd motor whit 52v battery,i have a eggrider display, i use my bike whit no problem for a copule ok month but in the last week, idk why any display show me the correct voltage of my battery, the voltometer show me 58.7v and the bike show 52v i have arealy set the display on 52v battery someone whit this issue?

@Mobilant_US Жыл бұрын

14 series battery.58.8v is normal.. Because it is the battery full charging voltage. 14s x 4.2v

@itzpiromane97 Жыл бұрын

@@Mobilant_US ok great and why i cant use it all? Bc the bike display show me only half battery?

@Mobilant_US Жыл бұрын

@@itzpiromane97 If one of the blocks in the battery pack series is broken. If the battery is used for a short time after charging, the battery will drop rapidly. If so, it is dangerous to continue using the battery pack.

@Mobilant_US Жыл бұрын

Repairs are difficult. kzfaq.info/get/bejne/h9hgnZeT0d2YdoE.html

@itzpiromane97 Жыл бұрын

@@Mobilant_US i think can be the battery the problem? I have two battery and the same have this issue, same are 52v but one is 20ah and other one is 52v 40ah, for sure im not able to do this 😢

@mxbadboy263 9 ай бұрын

Hangs down too far is the issue with bafang motors.

@lukewalker1051 7 ай бұрын

Problem with this frame design is you can't fit even a 20 amp-hr battery inside the triangle. Hard pass. The BBSHD needs 20-25 amp-hr battery for decent range. I own 2 BBSHD bikes.

@Mobilant_US 7 ай бұрын

you're right. So, when high-speed riding is necessary, battery packs are used in parallel. kzfaq.info/get/bejne/q89ngsSAxMe5h3U.html

@fraaggl Жыл бұрын

accelerator on the right is better...

@Mobilant_US Жыл бұрын

That's right. However, if the full-grip throttle is installed on the right side, there is a shift delay. The brakes are also different for each rider.

@fraaggl Жыл бұрын

@@Mobilant_US you put the shift gear on the left, no matter if it's upside down it still work fine.

@I_support_the_current_thing 3 ай бұрын

the motor sticks out like a sore thumb

@Mobilant_US 3 ай бұрын

Because the chainring is large, it is very rare for the motor to receive impact while going downhill.

@eugene9000pro 4 ай бұрын

The clearance is -10cm. This is not a perfect build by any means

@Mobilant_US 4 ай бұрын

thank you. There are numerous variables in kit installation for each bike.

@draggerlane04090 Жыл бұрын

Even a little weird having a second brake on the front but I get it. but what I don't get is why no change out that cheap drivetrain Your cassette and chain are not going to hold up the torque of that 1000 watt motor. And your chain protector. I'd would of 3D printed that but to each their own I guess.

@Mobilant_US Жыл бұрын

Thank you. The reason the brake position has changed is because I have been riding motorcycles for a long time. The chain protector might be easier with a 3D printer, but most ordinary people don't have one. I made my video so that anyone can watch a book or video without any special tools and follow along.

@Mobilant_US Жыл бұрын

The reason for the 8-speed is because the maintenance cost is cheap. it have to change the chain and cassette every 3000km.

@eXTreemator 2 ай бұрын

You don't. Just use goid quality cassette and not that...And change chain