This is a product overview of the Griffin Armament Bushwhacker® 46 universal suppressor. Handguns, rifles, machine guns, lever guns, hunting rifles? No problem. This does it ALL.
Пікірлер: 54
@TopShotDustin4 жыл бұрын
That’s awesome. So many choices!
@holyravioli57954 жыл бұрын
Now that is a good idea, I've never gotten into suppressors because i didn't want to buy a load of different ones for different guns but this seems to solve that.
@Mrgunsngear4 жыл бұрын
looks well thought out
@ArchetypeofMan5 ай бұрын
This is next on my list. The Paladin 5 has been amazing, so I'm sure this will be too!!
@GriffinArmamentOfficial5 ай бұрын
Great to hear!
@Atom_Alchemist4 жыл бұрын
...Thumb up this if they release the gen two while your gen one has still been stuck in atf jail...Also, was really hoping to see a QD attachment like the QD blast shield, that would be so awesome...
@Gunmonkey54 жыл бұрын
There is one, it’s the a2 qd attachment that screws on the back of the suppressor. I’m getting it once mine comes out of atf jail
@Gunmonkey54 жыл бұрын
I’m also in the same boat as you
@FFLDealerNetwork4 жыл бұрын
Well done!
@Prodigysportsman3 жыл бұрын
How can the Bushwhacker 46 and Optimus use user serviceable and non-welded baffles using full power rifle cartridges? That hasn't really been widespread.
@jn37504 жыл бұрын
Does the Gen 2 Bushwacker 46 suppress better than the Optimus - with test results?
@RandoQuestion4 жыл бұрын
Have you compared this to a Hybrid 46? How is the tone of the Bushwhacker and are there any DB reading yet?
@150DT4 жыл бұрын
I want the QD piston system for my Optimus!!
@GriffinArmamentOfficial4 жыл бұрын
Great news! its coming!
@de6294 жыл бұрын
Awesome
@WCGwkf3 жыл бұрын
Have any actually been released? All the websites show out of stock backorder. Gen 2 definitely looks like the one to buy if anyone actually had one...
@Gunmonkey54 жыл бұрын
My gen 1 is in atf jail, is there really a big difference in the baffle stacks? Should I really dish out the 100+ dollars to get the new stack?
@pdoggers4 жыл бұрын
Nice will it work on the 375 ruger with a 22in barrel? Or is it as long as its below 46 caliber its all good. So for like a 460 weatherby or some other stuff like that. Do I need to look at max pressure and compare to the ones you do list and go that way to figure it out?
@airenthusiast10714 жыл бұрын
I found that emailing them is the best way to get answers! 👍
@pdoggers4 жыл бұрын
Probably not in the budget right now so figured I would wait till I got closer to purchase. Thanks
@airenthusiast10714 жыл бұрын
@@pdoggers No problem.
@rcairnut4 жыл бұрын
I really like my Optimus. I wonder if this 46 would work on a .458 SOCOM?
@@GriffinArmamentOfficial OH oh, another AFT wait upcoming ... lol
@Talex-jb8bp4 жыл бұрын
OK so I have one more question would you guys do a custom thing for me if I paid for it like actually change the suppressor because I want it to be 1.6 inch outer diameter Version of the Optimus ???
@notaturkey26073 жыл бұрын
That would cost you tens of thousands of dollars to create, basically, a whole new design. Every inch of it will need a new design, build, test, break and redesign, re-test and development of months of time.
@MauriceLeviejr4 жыл бұрын
How about a customer appreciation day at McMiller’s in Eagle?
@evangreen75624 жыл бұрын
interesting proposition
@BrassCatcher4 жыл бұрын
I need a 5/8x24 taper mount device for an Optimus to run on a 350 legend. I can’t find one with that thread pitch with a 9mm bore on your site.
@evangreen75624 жыл бұрын
you can grab a 5/8x24 45 cal EZ-Brake™. not a perfect match but pretty close.... or you can go 3 lug in that pitch.
@BrassCatcher4 жыл бұрын
Evan Green is it safe to run the 3 lug on 16” 350 bushmaster?
@gabelstapler194 жыл бұрын
Hopefully they have a solution for you, but it would be best to email them directly (they've always responded to me within 24 hours on week days). I specifically went with a Faxon 350 Legend barrel because they use 1/2x28 thread pitch, and Griffin now makes 1/2x28 9mm taper lock muzzle devices. FYI, if you find a mount, the configuration for 350 Legend is full length, but without the rifle blast baffle (that's 30 cal). I like how mine shoots suppressed!
@evangreen75624 жыл бұрын
@@BrassCatcher should be... if you have any issues which you shouldn't, we'll cover it.
@Talex-jb8bp4 жыл бұрын
Any thoughts on making a GEN 2 Optimus because I’ve gotten to play with one of them from a Friend and he’s been waiting for another version of it I like it too though
@GriffinArmamentOfficial4 жыл бұрын
already done.... video will be out in a few weeks ;)
@aermotors4 жыл бұрын
@@GriffinArmamentOfficial Oh, awesome. My Optimus in jail will be obsolete by the time I get it. * screams into pillow *
@Talex-jb8bp4 жыл бұрын
Griffin Armament Yay I’m so happy !!! Seriously I’m not even joking
@No.one.or24 жыл бұрын
@@aermotors I feel ya, been waiting 7 months and now there coming out with a gen 2.
@de6294 жыл бұрын
Jeez. Just picked up my Optimus on Tuesday.
@akaTheDevil4 жыл бұрын
How do you know the one that you are buying is the first gen or second gen?
@evangreen75624 жыл бұрын
There are no more gen 1 units available in the country.... so every dealer nationwide will be selling Gen 2's at this time.
@Buffal0ChiknRAT4 жыл бұрын
Still waiting on my OG Bushwhacker 😭
@GriffinArmamentOfficial4 жыл бұрын
Postive side.... Youre fuckin OG!!!
@Buffal0ChiknRAT4 жыл бұрын
Griffin Armament just saw that I could upgrade to the new baffles in the future if need be. You guys rock 🤘
@mastersons114 жыл бұрын
can you use the QD with any glock...
@evangreen75624 жыл бұрын
Yes you can.... any tilt barrel pistol.
@desperado86053 жыл бұрын
I'm actually looking forward to tax time this year just to order this
@aermotors4 жыл бұрын
People who have their Gen 1 in jail are fucking screaming so hard into a pillow right now.
@FlowBaka4 жыл бұрын
Well that’s not fair, I just put a bushwhacker in jail about two weeks ago.