Buy Pole Saw Parts for Harbor Freight Portland Chicago Electric Power Tools Oregon Bar & Chain

Рет қаралды 23,806

5 жыл бұрын

This KZfaq video show how to replace the bar and chain on the Harbor Freight Portland Chicago Electric Power Tools polesaw pruner trimmer and where to find replacement parts.
If you are wondering how do you cut high branches or cut a broken tree branch, this pole saw is great for tree and brush trimming. At least until it breaks. I have searched Walmart, Lowe's and even Home Depot and Menard's but couldn't find the part for this pole saw. I eventually found the parts at Amazon.
The links below will help you find the parts you need.
Compatible Parts and Hardware Pack: amzn.to/2OwXS3I
Replacement Bar: amzn.to/2VwDvZ4
Replacement Chain: amzn.to/2JCpinV
Oregon Chainsaw Grease: amzn.to/2YHyQkp
Oregon Bar And Chain Oil: amzn.to/2BtV1Tx
A Better Less Expensive Pole Saw: amzn.to/2YCwZNK
As an Amazon Associate I earn from qualifying purchases. This helps support my channel without any additional cost to you. Thank You!

Пікірлер: 72

@genemetz1945 Ай бұрын

I love my Kobalt Pole Saw - 80-volt - 5ah battery - 10" Bar - 6 ft / 8ft foot Pole Saw. I have been using it for more than 3 years now. It works great on my southeast Louisiana farm clearing property that a hurricane went through and trashed all the trees in the woods of our 20-acre farm. Today I'll be cutting a 6-inch limb off of a tree out front.

@atticustkam 2 ай бұрын

Thanks, this was super helpful. Someone gave the Chicago Electric pole saw, brand new in the box, but it was missing the bar, chain, and chain guard. I wasn't finding replacement part info looking in the typical parts sites, but you resolved what parts were needed and where to find them.

@madcyborg 4 жыл бұрын

Just what I needed. The info on the aftermarket bar and chain... Stuff wears out, it's MUCH appreciated to have a video like this one to find the parts.

@roberta.edinger9405 4 жыл бұрын

Thank you so much, I'm glad the video helped.

@brightidea1 5 жыл бұрын

Thanks to you, I ordered a replacement bar and chain for my Harbor Freight pole saw, after using it to cut down 5 trees and also cut the stumps out. Keep up the good work!

@roberta.edinger9405 5 жыл бұрын

Thanks! I'm glad the video helped.

@lonnieblackwell5107 4 жыл бұрын

Just what I needed too. Cut off a large limb and as it fell, pulled my saw into concrete while running - many sparks!!

@roberta.edinger9405 4 жыл бұрын

I'm glad the video helped. I hope the large limb you are referring to is from a tree and not a human body.

@724599 3 жыл бұрын

Great video, now i know why the oiler doesn’t work on my P-saw.

@roberta.edinger9405 3 жыл бұрын

Glad it helped

@mikedee4399 Жыл бұрын

Thank you so much i have been pulling my hair out!! So I just need to get an 8" blade then I hope? I wasn't able to get it to be as tight as I would of liked it to be and would keep coming really loose fast.

@nms1508 4 ай бұрын

Did this work?

@mikedee4399 3 ай бұрын

it's actually its weird I don't know what in the hell is going on 🤬. I put on the 8-inch chain and tightened it up, but every time I start cutting something it comes loose right away. I don't know if something's wrong with the tensioner screw that turn to tighten up the chain. When I do tighten it I will turn the screw as far as it will go and it is a little looser than I would normally set it at

@edburden8550 Жыл бұрын

My saw is a Lynxx but was purchased at harbor freight and looks just like the Oregon. Same saw basically? Thanks!!!

@freeshavacado3959 2 жыл бұрын

Do you have a link for finding where to get a replacement drive sprocket? This is the 6 tooth sprocket under the cap at the other end for the saw chain. I have searched and only come across a Oregon PS250 kit, which looks like the right one. Just want to see if there is another source for it. Thank you.

@ecitadllcflorida1587 Жыл бұрын

Hello, I see this video is about a year old, butt if your still around could you please tell where to find the inside sprocket assembly? Thanks.

@tucsonairbrush3233 Жыл бұрын

could you please post a link for replacement parts for the Sun Joe?

@crashinc06 Жыл бұрын

My retaining ring popped off after 3 cuts no idea what size it is or where to get one

@debbiethompson9406 3 жыл бұрын

Thanks Robert! My problem is that too much oil is flowing out all over the place. Maybe I should check to see if that little hose is on good, or maybe that's how they are?

@roberta.edinger9405 3 жыл бұрын

I think you are right about the hose.

@sh1529 2 жыл бұрын

How do you check on the hose t see if all is well there?

@MountainNetworker Жыл бұрын

Do you know what size the Allen wrench nut is?

@TonySaprano 3 жыл бұрын

Robert, After you fixed the oil feed. Did you have any problems with the oil again? Next question, When you used the pole saw after the repair. Did you noticed the oil in the site glass is going down and the bar looks like it's kind of wet from the oil ? (working) ? I noticed my bar looked dry . So, I took the cover off and removed the chain. I plugged the pole saw in and watched the oil port and it was feeding the oil to the bar. It had a lot of dirt inside the cover and I thought this might be limiting the oil feed. I cleaned everything and closed it up. I put a few drops of oil on the bar and started it up again and watched. I guess I'll have to watch the site glass to see if the oil is going down before I burn up the bar. Thank you big time for this video. Awesome job Robert !

@roberta.edinger9405 3 жыл бұрын

Still working.

@dannyd9821 Жыл бұрын

Where do you get the drive gear. Thanks

@matthewroot3939 2 жыл бұрын

I try your link for the bar and it only goes to Amazon home not to the part

@daver.9668 4 жыл бұрын

Do you have any idea where to get a socket head cap screw that holds on the sprocket guard? The parts book just says 8 * 25. I'm thinking this is my last Harbor Freight purchase even though the saw was ok for what I paid for it. Any ideas on the allen head screw?

@roberta.edinger9405 4 жыл бұрын

There is one in this kit: amzn.to/2OwXS3I

@mattgould1485 4 жыл бұрын

My neighbor loaned me one of these for some intense trimming, and it worked well. However, it has a sponge/foam cover or wrap that tore during my work. Any idea how to replace that part?

@roberta.edinger9405 4 жыл бұрын

Will this work? amzn.to/2WhtcGL

@jktwighlightgirl5431 4 жыл бұрын

@@roberta.edinger9405 That may be as close as I can get. Thank you.

@jktwighlightgirl5431 4 жыл бұрын

My daughter apparently hijacked the computer, hence the "JKtwighlightGirl1." Heh.

@harryshyket5067 4 жыл бұрын

Do you know where to get a replacement cap/hex bolt?

@roberta.edinger9405 4 жыл бұрын

These parts just might work. If you try it, please let me know Thanks. www.amazon.com/gp/product/B01DTIF85G/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=raetube-20&creative=9325&linkCode=as2&creativeASIN=B01DTIF85G&linkId=41f3f821b475dc367aa62f0e68256045

@MatHelm 4 жыл бұрын

The real question on anything electric is the brushes. Which is the only reason I watched your original video. Note that the brushes on this motor are replaceable but not made to be replaced (which is what has killed every electric chainsaw I've ever owned). And fyi, any brushes you find on Amazon aren't worth the shipping fee even if it's Prime/free. They're all literally dust in the wind and won't last much more than 5 or 10 minutes of unloaded running. Your best bet is to find a electric tool with replaceable brushes that are larger than the brushes you need, order a set and grind them down to the right size to fit your need.

@roberta.edinger9405 4 жыл бұрын

Thanks for the info. When you say bushings do you mean brushes?

@MatHelm 4 жыл бұрын

@@roberta.edinger9405 Yes, thank you, Brushes.

@Jagracoki 3 жыл бұрын

Well, that answers my question. I was going insane searching the web. *Update: Harbor Freight is trying to acquire the rights to buy parts from the company who makes them. They said to keep checking back.

@leagarner3675 Жыл бұрын

First, that is not a dirty pole saw. It's not really been used. Second, what special chain saw grease?

@dewaynefederico7710 3 жыл бұрын

I cannot C the link as well.

@gr8vocl 3 жыл бұрын

What is the part that has the green on it with the tightening screw?? That part broke and I need to replace that but don’t know what it’s called.

@roberta.edinger9405 3 жыл бұрын

It is called a sprocket cover. In the description, there is a link where you can buy it.

@gr8vocl 3 жыл бұрын

@@roberta.edinger9405 there’s a few links there and none say that actual part. Which link do I click? TIA

@bepilc 4 жыл бұрын

I just received mine this morning, no cap (item# 32) for oil tank with the saw, I suspect who ever forwarded this from the Harbor Freight outpost location cannibalized it. I tried different caps I found in my garage, but no luck, as yet.

@roberta.edinger9405 4 жыл бұрын

Let us know what you find. Thanks.

@delilah_rose 3 жыл бұрын

My husband has lost this exact part and I'm trying to find a replacement. Did you ever have any luck finding a source?

@chriss8354 Жыл бұрын

I just bought this saw...but the Sun Joe is better? Why?

@orbnitsky 4 жыл бұрын

Anybody know where to find an oil filler cap for these?

@roberta.edinger9405 4 жыл бұрын

Hope this helps. amzn.to/2OwXS3I

@rurdyspice 4 жыл бұрын

Anybody know where I can get the drive sprocket for this?

@roberta.edinger9405 4 жыл бұрын

If I find it I will post a link here.

@been2all505 4 жыл бұрын

I can’t even find a replacement chain for mine. It’s a Lynxx 40 volt. It’s ridiculous that Harbor Freight doesn’t carry them.

@dennycannon8410 4 жыл бұрын

Is there anyplace else to get the bar? Amazon doesn't take PayPal, and that's the only way I'll order online.

@roberta.edinger9405 4 жыл бұрын

If I find another place I will let you know

@davidjh7 4 жыл бұрын

You can find the Oregon brand S33 chains and the 8" Oregon bar on ebay also. Robert was kind enough to show he model numbers and information required to make the search much easier. Thanks, Robert!

@patricialyn3894 2 жыл бұрын

homedepot have them

@victorbalancia5264 5 жыл бұрын

I can not see a link.

@roberta.edinger9405 5 жыл бұрын

The links is in the description. Thanks.

@SHEABURKE-cf8ju 3 жыл бұрын

Where to get the switch ??

@roberta.edinger9405 3 жыл бұрын

I am not sure. If you find one, let us know.

@hconnell4177 4 жыл бұрын

Yeah I don't know where the link is either.

@roberta.edinger9405 4 жыл бұрын

The links are in the description.

@notcharles Жыл бұрын

Everyone of the links to Amazon parts was blocked!

@rickymitchell3822 3 жыл бұрын

I need brushes and holder and wire for Portland pole saw 68862

@roberta.edinger9405 3 жыл бұрын

Let us know if you find them, thanks.

@ChronicBongitis420 4 жыл бұрын

replacement bar and chain are available at Lowe's and Home Depot they are listed in Oregons catalog as Chicago electric or just plain Chicago. Spoke to a Oregon not but 20 minutes ago. You're not going to find the exact same bar and chain, because they are the dirt cheapest ones made by Oregon for oem's like harbor freight. harbor freight calls it a 9 1/2 inch bar and chain but it is actually an 8 inch bar and chain because they measured it like a dumba**

@roberta.edinger9405 4 жыл бұрын

Thanks for the info!