Cabinetry Basics P4 [Video 438]
Рет қаралды 164,608
3 жыл бұрынI get a lot of questions about #cabinet and #carcass #construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, in Part 2 I went through the most basic methods of joining the sides to the top & base, in Part 3 I looked at seven different types of hidden fixings, and in this concluding Part 4 I discuss wether you should fit a back, and how they should be hung on the wall…
Part 1 is here - • Cabinetry Basics Part ...
Part 2 is here - • Cabinetry Basics Part ...
Part 3 is here - • Cabinetry Basics P3 [V...
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
*Support 10 Minute Workshop as a KZfaq Member* bit.ly/10minuteMember
*Support 10 Minute Workshop on Patreon* - / 10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - bit.ly/10minuteShop
Amazon store - bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - bit.ly/10minute-links
Full list of ‘Stuff I use’ at bit.ly/stuff_I_use
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
++++++++
Mentioned in this video:-
Keyhole hanging plates (similar) amzn.to/3advhcW (US: (similar) amzn.to/3ovQHXJ)
Corner plate - amzn.to/3raoiZh (US: Nope, sorry 🤷♂️)
Cabinet hanging bracket wall plate - amzn.to/3adybOS (US: (complete bracket) amzn.to/2NLPWx7)
Grooving bit - amzn.to/3rc9LMJ (US: (OUCH!) amzn.to/36nx9Pa)
14mm straight bit for hanging plate - amzn.to/3pB8sX3 (US: amzn.to/2MhCBwd)
Self-centering bit is a Trend snappy one from this set - amzn.to/38FuzpO (US: (single bit) amzn.to/36tzTe1)
Ryobi air strike narrow crown stapler - amzn.to/3h6Mo2E (US: amzn.to/3283zeI)
Dowel jig kit - amzn.to/36FLdnx (US:[similar] amzn.to/3a0HKjX)
8 x 30mm dowels - amzn.to/38yb16J (US:[3/8th] amzn.to/2KJAKQ5)
Lamello Biscuits - amzn.to/39fuNnv (US: amzn.to/367dEKL)
Aldi Ferrex biscuit jointer no longer available
Festool Domino - amzn.to/2pVSnMk (US: amzn.to/2o7E22Q)
Festool Domino assortment - amzn.to/2piZjHa (US: amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - amzn.to/2oTq5CZ (US: amzn.to/2oOqyrL)
Domino connector set - amzn.to/2mV8OJu (US:amzn.to/2LKRDZ1)
Lamello Zeta P2 - amzn.to/2Xpu5vB (US: amzn.to/2Kufuv1)
Lamello Clamex P-14 amzn.to/2Wkm922 (US: ??)
Peanut 2 connector system - shop.intelligentfixings.com?ref=10minuteworkshop
Lamello Tenso P-14 - amzn.to/2Z5i4eX (US: woah - are these not available in the US??)
Festool TS55 Tracksaw - amzn.to/2pGvzDS (US: amzn.to/2oOgGhw)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Bessey Duo Klamp - amzn.to/2tsSWQs (US:amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool Granat abrasive - amzn.to/2A3c1vW (US: amzn.to/2gPAAUz)
Festool RTS 400 - amzn.to/2x6zGZW (US: amzn.to/2i84yXn)
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Festool ETS 150/5 - amzn.to/2sapsq9 (US: amzn.to/2ssbZgq)
Festool CTL Sys - amzn.to/2sKa2t3 (US: amzn.to/2tCvVdZ)
Festool CTL SYS Bags - amzn.to/2G9eFVd (US: amzn.to/2GduBpo)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
Silicone brush set - amzn.to/2guo6Sm (US: amzn.to/2yEWbZI)
Silicone brush (single) - amzn.to/2l5rNTD (US: amzn.to/2zqFaQl)
Polyvine PolyTen PVA - amzn.to/2svT03N (US: amzn.to/2rmHYL3)
@garvielloken3929 2 жыл бұрын
That smug look when the cabinets fit perfectly flush - PRICELESS
@jaymacgee_A_Bawbag_Blethering 11 ай бұрын
I know I’m WELL late to the party , but your do good at demonstrating and explaining the basics that I’m not going to pay the £3,600 I’ve been quoted for a modest kitchen in my view that I need for my new house and am going to invest £400 in a range of tools and jigs and fittings , then follow your advice with MDF types and have a go myself . This is a fabulous resource you’ve made available and I genuinely thank you for that . 👍🏴
@jeffstanley4593 3 жыл бұрын
There is no way I could have taken three separate carcasses attached them to a wall via three different methods and have them be level across the top. Even the same method is doubtful.
@markcopple2870 3 жыл бұрын
I was thinking the same thing. well done.
@10MinuteWorkshop 3 жыл бұрын
Well, I don't show you how many times I had to do them, lol! 😂👍
@brianglezman 3 жыл бұрын
@@10MinuteWorkshop You should do a basics on measuring and layout!
@andythebritton 3 жыл бұрын
Had the same thought. I could try that a dozen times and get the same number of variations!
@DavePawson 3 жыл бұрын
@@brianglezman Excellent idea.
@RuneBivrin 3 жыл бұрын
Just the tip with the tape on the level, with pencil marks for distance is well worth a Patreon offering. So simple, but incredibly practical. Beats any measurement in either metric or imperial hands down!
@10MinuteWorkshop 3 жыл бұрын
Thank you! 🙌👍
@derekhawley9660 Жыл бұрын
Yes, brilliant idea (I was going to say 'simple') ... its only simple to the man that made us look simple. ha ha
@diegohuijbregtsgarcia5102 5 ай бұрын
I came down to the comments to say this, amazing tip
@JezVibert 3 жыл бұрын
Marking a datum on a spirit level. So obvious, why have I never thought of that before? Really useful series, thanks Peter and congratulations on 100,000 subs. Well deserved
@10MinuteWorkshop 3 жыл бұрын
Thanks! haha, always the little things isnt it? 👍
@garryholmberg6502 3 жыл бұрын
I wear wireless headphones when watching youtube videos as not to bore my wife to death. But this morning I was so stunned by the simplicity of using the level in this way that I said brilliant out loud!! My wife looked over at me with a puzzled look:! So I stopped the video, took off the headphones and proceeded to bore her to death explaining what a brilliant idea it was to use the level to transfer marks. Eventually I got her to agree to the brilliance, not sure if it was because I finally had explained it well enough, or that it was the only way she could get me to put my headphones back on:)! Simply brilliant! And ditto congrats on 100K!
@andythebritton 3 жыл бұрын
Yep - that's going to make my heart sink a little less every time I have to put something on the wall from now on.
@MrGuardcaptain 3 жыл бұрын
@@10MinuteWorkshop Was typing my comment and got as far as "Oh bloody hell Peter! Why did I never think of that" when @JezVibert beat me to it. It's so simple. I've spent a fortune hanging wall mounted cabinets over the last year fixing miss drilled holes and covering mistake (in my own house of course). Will never need to do that again. Genius.
@Reefgc 3 жыл бұрын
@@10MinuteWorkshop I am going to remember that one for sure! thx
@user-np7pq2gy1v 3 жыл бұрын
The best teacher on youtube! You anticipate every question I could have. Thank you! Your happiness is well-deserved and absolutely contagious when those cabinets line up perfectly. This channel is what it's all about!
@10MinuteWorkshop 3 жыл бұрын
Thank you! 😆 👍
@jasonm.7358 3 жыл бұрын
Thank you, Peter, for this series, and all of your videos. Not only are they very useful for their intended purpose, but they are an absolute _model_ on what a properly edited KZfaq video should look like. Congratulations on 100k subscribers, sir, you deserve many more.
@10MinuteWorkshop 3 жыл бұрын
Thanks Jason! That’s very kind of you to say, and very much appreciated! 👍🙌
@simonchiplin 3 жыл бұрын
What I find quite amazing is that Peter has made 3 identical cabinets and hung them on a wall using 3 different methods and got them all to line-up perfectly! That's the sort of thing that would keep me awake at night, worrying if they were all made right and would hang properly in someone's home. And Peter is doing it for sh!ts and giggles is seems! lol Btw Peter, congratulations on 100K! Next you can show us how to hang a 100K subscribers plaque properly lol
@10MinuteWorkshop 3 жыл бұрын
Well, I did have a perfectly flat and plumb ‘wall’ 😂👍👍
@Hanshu_beast_ 8 ай бұрын
I have watched all the 4 videos in the series without skipping a single second of the video, content and information is to the point. decent and informative video. Thanks for this video.
@geoffhayday6003 3 жыл бұрын
I find the fixing to the wall the hardest part, to end up with it where I want and fairly level. Some good tips here though, thank you.
@rorychallands8516 3 жыл бұрын
I think this has been commented on already - but I'd love to see a video from you on measuring for hanging things on walls: how you get consistent levels for cabinets, picture frames, etc. It's one of the things even the most DIY-phobic home dweller has to do fairly frequently. And it's bloody hard to get right! It looks like you've got some smart tricks up your sleeve, Peter. Thanks for another great video, also.
@10MinuteWorkshop 3 жыл бұрын
Thanks Rory! Yes, I think there may well be a ‘How to hang stuff up’ video out before too long! 👍👍
@davidsneddon2242 3 жыл бұрын
Absolutely amazing consistency in accuracy and quality in the whole series Peter, a true professional.
@10MinuteWorkshop 3 жыл бұрын
Thanks David! 👍👍
@justicefries 3 ай бұрын
Love your videos! That one trick about transferring hole center to a level is going to save me so much frustration. Cheers, Peter!
@10MinuteWorkshop 3 ай бұрын
Thanks 👍
@reedpeterson719 3 жыл бұрын
I'm patiently waiting for the door hinge segment
@cricalix 3 жыл бұрын
Videos 269, 314, 348, 357, 380, 410, and 412 (all listed at kzfaq.infovideos) should help with your wait :)
@colinwilson7524 3 жыл бұрын
LOL! Came here to leave same comment
@TigerPutoG 3 жыл бұрын
Thank you for reminding me what I was watching for!!👊🤘
@Reuben.Hesser 3 жыл бұрын
Congratulations on 100K! As a teenager, I’d don’t have the resources to create multiple cabinets to understand different building methods etc. so your videos are so insightful to me. Built a garden shed over the summer and put up a feather-edge fence behind it, think my next project will be indoors for a change haha! Made plans for a bedside table with some drawers based on one I already have so will probably make that soon as I’ve not done drawers before.
@10MinuteWorkshop 3 жыл бұрын
Sounds great! Everything I learned, I learned by doing. 👍👍
@zoros1976 Жыл бұрын
Great and informative introduction to cabinet fixings! Thanks!
@daniellyne1 3 жыл бұрын
Thank you Peter really appreciated you making this small series
@10MinuteWorkshop 3 жыл бұрын
Thanks! I enjoyed making this one, actually! 👍
@leolord1 6 ай бұрын
These videos are pure gold!!
@elguapo1507 3 жыл бұрын
Thanks Peter! Great to see them side by side in this way! 👍 Congratulations on your FIRST hundred thousand! 😁
@10MinuteWorkshop 3 жыл бұрын
Haha, thank you! 🙌👍
@gangdavekilbey8491 3 жыл бұрын
What I like is simple advice and different examples on how to get the same results and not trying to say you need the most expensive tools
@10MinuteWorkshop 3 жыл бұрын
Thanks! 👍
@jin6000 8 ай бұрын
Man, your videos are nothing short of a PLEASURE to watch. Both for the excellent info within, and also to watch your exceptional workmanship. Well done and thank you so much!
@10MinuteWorkshop 8 ай бұрын
Thank you!
@garenne0169 3 жыл бұрын
One thing i particulary appreciate in your video is the clarity. You make me more confident in furniture making video after video. Thanks a lot Peter.
@10MinuteWorkshop 3 жыл бұрын
Thank you! 🙌👍
@drmkiwi 3 жыл бұрын
Well done and congratulations - It's just over a week since this was published and your subscribers have increased by more than 10% - Yah bloody hoo! Cheers, David
@10MinuteWorkshop 3 жыл бұрын
Thanks David! That exaggerates the growth a little - the videos are shot and scheduled ahead of time - but I'm still extremely happy with the way he year has started!😆 🙌 👍 👌
@sazdab 3 жыл бұрын
Mr Millard, you are a magnificent teacher willing to impart knowledge that is practical and easy to follow.!!! Thank you.!
@10MinuteWorkshop 3 жыл бұрын
Thank you! 👍🙌
@nunofreitas1796 3 жыл бұрын
Congratulations for the 100k...your work deserves everyone and a few more "k" that you already have and that will come ... by the way, at this moment when I am writing these words, it has only been 9 hours and 9 thousand people have already subscribed. Well done. We want more!!!
@JamesManCave 3 жыл бұрын
Great series Peter, enjoyed them all. I think the one that stands out to me as being cost effective and great for flat packing is the peanut connector, might have to take a closer look at that. Back when I used to help a mate out with shop fitting, most of the things we put together were fitted with a round cam lock system, used to hold things together really well.
@Cogitoergothijs 2 жыл бұрын
Thanks Peter. I really enjoyed this series.
@AK-de3ej 3 жыл бұрын
It is very hard to watch all channels related to woodworking but I see that your channel is something different - there is a lot of good working hints event for amateurs who does not want to sell a kidney to buy tools, usually promoted by the influencers. On this channel I can see that a lot of things can be made using simple tools for beginners and clever ideas.
@10MinuteWorkshop 3 жыл бұрын
Thank you! I’ve been a cabinetmaker for ~20 years, so have a decent array of nice tools that O’ve purchased with the proceeds of my own labour - but I’m a big fan of cheap tools, tools that enable enthusiastic amateurs - which is what we all were once - to produce their own work at a cost that won’t make them give up before they event try starting! 👍👍
@nnahk Жыл бұрын
I started watching these to fall asleep yo because your demeanor is relaxing but they've been too helpful and interesting 😊
@ciptrofin 3 жыл бұрын
I just used your level-pencil-tape-marking method to hang some shelves and it worked GREAT! Thank you!
@10MinuteWorkshop 3 жыл бұрын
Appreciate the feedback! Thanks! 👍👍
@benjaminfisher5809 3 жыл бұрын
Your a gentleman Peter. Love your videos. Thanks for sharing buddy
@10MinuteWorkshop 3 жыл бұрын
Thank you! 👍👍
@BeauChampion 3 жыл бұрын
I'm really digging this series, Professor Millard! 😉
@10MinuteWorkshop 3 жыл бұрын
Haha, thank you! 👍
@douglaslopes1987 3 жыл бұрын
Awesome Peter. Every video showing things that might sound obvious for professionals, but are a real struggle for someone starting in woodworking. This video series is being amazing. Thank you very much. And congratulations for the 100k subscribers. I remember when you had about 20 or 30k lol. Well done and well deserved. And this is just the "beginning".... Have a great weekend.
@10MinuteWorkshop 3 жыл бұрын
Thanks Douglas - much appreciated! Good weekend yourself! 👍
@Slugsie1 2 жыл бұрын
Nice series, and I learned plenty. Also, 7 months on and you're about to crack 150K!
@10MinuteWorkshop 2 жыл бұрын
Thank you! And yes, it looks that way - but let’s not jinx it! 😂😂👍
@GarethFuller 3 жыл бұрын
The entire series has been super informative. Some gem hints and tips which I'll definitely refer to down the line. Thanks so much
@10MinuteWorkshop 3 жыл бұрын
Thank you! 🙌👍
@chadwickpainter8212 2 жыл бұрын
I just stumbled across this series and your channel. What a wonderful channel! You sir are a breath of fresh air for me. It is so nice to watch videos that are informative while in straight forward talk. You are extremely thorough without being taxing. This was a great series on several subjects I was mystified by. Thank you very much for your work. I subscribed to the channel half way through the first video in the series and watched the remainder of the videos without a break. Again thank you and I look forward to watching many more of your videos.
@10MinuteWorkshop 2 жыл бұрын
Thank you and welcome! 🙌👍👍
@krungstar4541 3 жыл бұрын
Really appreciate the series of 4. Spot on for what I needed. Basic stuff but loads of ideas to throw at the wall (literally)
@alaskanawesomeness9017 3 жыл бұрын
We had this conversation a few years ago but I still can't believe how nice of MDF you guys have over there. Great information !! Congrats on 100K!!!!!
@10MinuteWorkshop 3 жыл бұрын
Thanks! Yes, it is a different ‘breed’ of MDF, much higher quality than what I understand you folks have to put up with. 👍👍
@DongusKong Жыл бұрын
@@10MinuteWorkshop it's truly a crime how bad MDF is in the states. I'm beyond jealous
@NickWallaceCT 11 ай бұрын
Brilliant , thank you for taking the time to create these videos
@MrGuardcaptain 3 жыл бұрын
The more I watch this video, the more I kick myself for every stupid mistake I've made fitting wall mounted cabinets. Peter, you have no idea how grateful I am to you for sharing your wisdom.
@10MinuteWorkshop 3 жыл бұрын
Thanks! And don’t kick yourself too hard - I only learned by doing it wrong, many, many times! 👍👍
@duco8882 Жыл бұрын
French Cleats for me. Anchors in wall not easy to find and sometimes distant. Excellent videos. Have learned a lot. Specifically dowels ❤️👍
@virginiademelo Жыл бұрын
Ty for the class!! You have a talent for teaching imo
@emmetworkshop2829 3 жыл бұрын
Well done on 100,000 subscribers Peter. Richly deserved. Thank you for all you’ve shared.
@10MinuteWorkshop 3 жыл бұрын
Thank you! 🙌👍
@JimmyGarita Жыл бұрын
thanks for the cabinet serie, for sharing the knowledge and techniques!!
@jeffpowell7915 3 жыл бұрын
Thank you Peter for the Cabinetry Basic Series. Brilliantly concise and practical like all the other tutorials.
@10MinuteWorkshop 3 жыл бұрын
Thanks Jeff! 👍👍
@carllamb6711 3 жыл бұрын
Congratulations Peter well done mate well deserved 👍👍👍👍
@10MinuteWorkshop 3 жыл бұрын
Thanks Carl! 🙌👍
@markbryan9989 3 жыл бұрын
Congratulations! As someone that has been with you since your first year, I have enjoyed the journey. I have learned a lot from you. Please stay safe and I look forward to more great videos in the future. Thanks Peter.
@10MinuteWorkshop 3 жыл бұрын
Thanks Mark, that's much appreciated! And you too. 👍
@AvaGrowth 2 ай бұрын
wow so many ways and they are all perfect level and set on the wall
@andythebritton 3 жыл бұрын
I am but a humble DIYer but greatly enjoy and appreciate the advice and experience that professionals take the time to share. Thanks Peter.
@10MinuteWorkshop 3 жыл бұрын
Thanks Andrew! 👍
@Smalltime 3 жыл бұрын
So kind of you to share your knowledge. Thanks!
@rodgerq 3 жыл бұрын
Congrats on the 100k (110k a day later at my time of viewing in fact). Well deserved.
@10MinuteWorkshop 3 жыл бұрын
Thanks! 🙌👍
@gmanp3028 Жыл бұрын
what a great series. Thanks Peter
@jefflemay66 3 жыл бұрын
Thank you so much for doing this series! It was awesome to see many different ways to accomplish the same task, rather than only relying on a singular method. Love all your videos!
@10MinuteWorkshop 3 жыл бұрын
Thank you - glad you enjoyed it! 👍
@pianova5825 3 жыл бұрын
This is one of the very few videos I watch from start to finish. Priceless tips and tricks :D Greetings from Germany Alex
@10MinuteWorkshop 3 жыл бұрын
Hi Alex, and thanks! Best wishes from London! 👍👍
@karamathussain406 2 жыл бұрын
Very informative indeed. Thank you for such useful tips. I keep on watching for sure.
@FritsvanDoorn 3 жыл бұрын
We can see the master here. I will never get the cabinets all at the same level the way you did. Super demo! Very interesting.
@10MinuteWorkshop 3 жыл бұрын
Thanks Frits! Having a flat, straight wall makes the world of difference! 👍
@TheClaudos 3 жыл бұрын
Hi. I am so glad to watch cabinet making in metrics. Easier for me to understand and follow. Thank you for your videos.
@10MinuteWorkshop 3 жыл бұрын
Thanks! Just the idea of trying to work in imperial gives me a headache! 🤕😂👍
@palmdodo 3 жыл бұрын
Congrats, Peter! 100k, and such wonderful video!
@10MinuteWorkshop 3 жыл бұрын
Thank you! 👍
@paulgarriock3898 3 жыл бұрын
I've been a big fan of your offerings for a while now. Thanks so much for doing what you do and congratulations on 100,000!
@10MinuteWorkshop 3 жыл бұрын
Thank you! Very kind of you to say, and much appreciated! 👍
@laurencesim3664 3 жыл бұрын
Amazing news that you have 100,000 subscribers. I thoroughly enjoy your teaching and your wonderful skills. Thank you for your channel
@10MinuteWorkshop 3 жыл бұрын
Thank you! Very kind of you to say, and much appreciated! 👍
@nam.321 2 жыл бұрын
Great content, thanks! I look forward to using these tips on a few shelves I’ll be building for the house.
@TomSilver_42 2 ай бұрын
Those metal almost French cleats you shows at around 7:00 and further are here quite used to hang kitchen cabinets. With one detail, those small parts are mounted onto the cabinets while whole long strip is attached to the kitchen wall. So you can later on re-position cabinets as you like regardless of their horizontal size. And if the strip was attached to the wall on level, then all the cabinets will have their tops on same level as well (if those small counter parts were mounted on cabinets on same spot like top cabinet corners, obviously).
@imperator708 3 жыл бұрын
hats off to the folks at medite. i signed up to their site after one of these videos and received a nice notepad, pen and thermal cup today. lovely gesture and just wish they had more presence on social media to thank them
@10MinuteWorkshop 3 жыл бұрын
Thanks - I got mine yesterday as well! And I agree, they don’t seem especially active on social, so they?? 🤷♂️👍
@wearsjorge55 3 жыл бұрын
The level trick I use all the time for marking fixings for heated towel rails which usually have no play at all. Works perfectly every time
@10MinuteWorkshop 3 жыл бұрын
Yep, works great! 👍
@debzcalardo6887 Жыл бұрын
Hi...just watched this mini series. I couldn't have found it at a better time! Thanks, it will be most useful. I tried to move my wardrobe to do some repairs on it but it completely fell apart on doing so. The tips gained here will now help me construct something out of its remains! Hopefully, it'll go to plan to give me a temporary storage option for some of the "homeless" contents!
@dhammer5645 3 жыл бұрын
Congrats Peter. It is well deserved!👍👍🇨🇦😃😃
@10MinuteWorkshop 3 жыл бұрын
Thanks! 👍
@jameschesterton Жыл бұрын
Amazing, thank you for this series.
@BischBaschBosch 3 жыл бұрын
Quality series Peter. You've shared some decent tips and advice with folk too. Very well thought out productions chap.
@10MinuteWorkshop 3 жыл бұрын
Thanks Stew! Much appreciated - and it's done the channel no harm, either! 😆👍
@madwilliamflint 8 ай бұрын
Excellent little series. I didn't plan on watching them all in a single sitting. But...there you go. I think I'm going to go for dowels for my first couple. I'm pretty new to all of this. Thanks o/
@NDG7583 Жыл бұрын
Wow......thank you Sr. You made it so easy and perfect. I'm want to learn the art of Woodworking and this cabinetry videos are very helpful. Hope one day I'm capable to make good quality cabinets.........thank you again man.......... cheers from México.......👍👍
@bobpurcell5662 3 жыл бұрын
Congrats on the 100K - you deserve it.
@10MinuteWorkshop 3 жыл бұрын
Thanks! 🙌👍
@madventure2318 Жыл бұрын
Great work Peter. 100k subs you say at the end of the video - now 200k. You earned every one. Keep the videos coming.
@10MinuteWorkshop Жыл бұрын
Thank you! 🙌👍
@jonfenwick6200 Жыл бұрын
187k at the time of me watching theis, but well done mate. really glad i found your channel. ill be watching evrynight now.
@10MinuteWorkshop Жыл бұрын
Thank you, and welcome! 🙌👍
@hannahswann747 Жыл бұрын
Brilliant series. Thank you so much 🙏💥
@muttermotion 3 жыл бұрын
JENIUS ! marking the level ruler., thanx you ! thanx you ! thanx you !
@rayhanmorales1364 Жыл бұрын
Great video series. Thanks from the DR
@KOZYgoat81 3 жыл бұрын
Nicely explained. Short and to the point. Thanks Peter!
@10MinuteWorkshop 3 жыл бұрын
Thanks Adam! 🙌👍
@raystanbury8397 3 жыл бұрын
Congratulations Peter on 110k - well deserved- top bloke.
@10MinuteWorkshop 3 жыл бұрын
Thanks Ray! 👍
@TheSadButMadLad 3 жыл бұрын
Well done on reaching and surpassing 100k. All done to the the content you produce. Just the right length with just the right content with just the right amount of information.
@10MinuteWorkshop 3 жыл бұрын
Thank you! 🙌👍
@pratvachan 7 ай бұрын
So beautifully done and explained. I must say your series was a delight to watch and learn.
@10MinuteWorkshop 7 ай бұрын
Thank you so much! 👍
@ChristianN- 3 жыл бұрын
Thanks for the great series Peter, now that your video is published it finally feels like friday! :D
@10MinuteWorkshop 3 жыл бұрын
Thanks Christian! 👍
@laapulsford 3 жыл бұрын
Yet another highly informative Peter, well done. *****
@10MinuteWorkshop 3 жыл бұрын
Thanks! 👍
@bezain7663 3 жыл бұрын
So great. This serie is a gem Thanks a lot Peter!
@10MinuteWorkshop 3 жыл бұрын
Thank you! 👍
@itzseafairyplayz5527 2 жыл бұрын
best cabinet tutorial! Strong Fundamentals!
@10MinuteWorkshop 2 жыл бұрын
Thank you! 👍
@JohnCoronelTV 3 жыл бұрын
This is my favourite of the series
@10MinuteWorkshop 3 жыл бұрын
Thank you! 👍
@markharrison1884 3 жыл бұрын
Thanks for the informative series and congrats on reaching 100k. You're producing informative and well presented content throughout and I thoroughly enjoy watching.
@10MinuteWorkshop 3 жыл бұрын
Thank you! 🙌👍
@thomascarhart928 3 жыл бұрын
Great series!! I am now excited to build my new cabinets for my shop!!
@10MinuteWorkshop 3 жыл бұрын
Thanks! Have fun! 👍
@stephenwlodarczyk175 3 жыл бұрын
The tape marking on the level. Brilliant, bloody brilliant. Thanks.
@10MinuteWorkshop 3 жыл бұрын
Thanks! 👍
@jerrylohr3491 3 жыл бұрын
Congratulations on reaching 100000 subscribers and thanks for all the informative videos.
@10MinuteWorkshop 3 жыл бұрын
Thank you! 👍
@alanorourke6140 3 жыл бұрын
Fantastic set of informative videos. Keep the consent going. By making doors for them. Follewed by floor standing cabinets. Absolutely fantastic.
@10MinuteWorkshop 3 жыл бұрын
Thanks! Yes, door spacing is on the list, as is floor cabinets. And drawers & runners. Maybe nailers & staplers, too... 🤷♂️👍
@Samessin06 Жыл бұрын
Incredible work! Thanks for sharing your knowledge!
@10MinuteWorkshop Жыл бұрын
Thanks! 👍
@gilbycoyote 3 жыл бұрын
One big takeaway for me is that i should get moving and finish my routertable. It would facilitate a lot of things. Congrats on the 100k
@10MinuteWorkshop 3 жыл бұрын
Thanks! And yes, they're very useful thing to have! 👍
@erictroutman1571 3 жыл бұрын
Thanks Peter. Good basic info that I can use. Congrats on 100k!
@10MinuteWorkshop 3 жыл бұрын
Thanks Eric! 👍
@MJ-nb1qn 3 жыл бұрын
Congratulations Peter! I love your videos. Thanks!
@10MinuteWorkshop 3 жыл бұрын
Thank you! 🙌👍
@tonyshenton4123 3 жыл бұрын
Thanks Peter brilliant series as always, inspired me to give a few cabinets a go.
@10MinuteWorkshop 3 жыл бұрын
Thanks Tony - let me know how you get on! 👍
@frankblack1481 3 жыл бұрын
That clamp-as-jack bit is very cool. 👍
@10MinuteWorkshop 3 жыл бұрын
Yeah, it’s a great way to jack a cabinet up incrementally 👌👍
@michaelcarroll4330 3 жыл бұрын
Congrats on the 100k, Peter; testament to great content delivered with a lovely style - long May you continue👏👍
@10MinuteWorkshop 3 жыл бұрын
Thanks Michael! And plenty more to come! 👍
@stuggit 3 жыл бұрын
100k subs! well done Peter, you deserve millions.
@10MinuteWorkshop 3 жыл бұрын
Thanks! Maybe one day! 👍
@BarbaryStudio 3 жыл бұрын
I learned a lot on this channel thank you Peter Millard
@10MinuteWorkshop 3 жыл бұрын
Thanks! 👍
@kiki231000 3 жыл бұрын
A great series. A great channel -- your consistent approach to the work and presentation is a joy to watch , and an example for the rest of us KZfaqrs
@10MinuteWorkshop 3 жыл бұрын
Thank you! Very kind of you to say, and much appreciated! 👍
Peter Millard
Рет қаралды 1 МЛН