Dowel Jig Basics [video 441]

Рет қаралды 359,879

3 жыл бұрын

In this video I take a closer look at #cheap #dowel #jig and see what we need to do to get the best out of it. Enjoy!
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:www.meditemakesitreal.com/?ut...
++++++++
Other videos mentioned:-
Cabinetry Basics playlist - bit.ly/CabinetryBasics
Lightweight trestles • Lightweight Folding tr...
10 year of Domino P1 • 10 Years of Domino Par...
Lamello Zeta first job • My First Commercial Jo...
Cabinetry basics p3 • Cabinetry Basics P3 [V...
Peanut 2 Mini Jig • Peanut 2 Mini Jig[**Gi...
+++++++++
Become a 10 Minute Workshop KZfaq Member for exclusive content - bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - / 10minuteworkshop
Support the channel directly - bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - bit.ly/10minuteShop
Amazon store - bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - bit.ly/10minute-links
Full list of ‘Stuff I use’ at bit.ly/stuff_I_use
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
++++++++
Used/featured in this video:-
Dowel jig kit - amzn.to/36FLdnx (US:[similar] amzn.to/3a0HKjX)
Dowel jig (no extras)- amzn.to/2MgiBdl (US:[similar] amzn.to/3a0HKjX)
Dowel jig bare (similar) - amzn.to/3bS5Oqu
8 x 30mm dowels - amzn.to/38yb16J (US:[3/8th] amzn.to/2KJAKQ5)
Wolfcraft dowel master jig - amzn.to/3dt7d9i (US: [similar] amzn.to/37tKqXb)
Wolfcraft depth stops - amzn.to/3ufYxJp (US: nope, sorry)
Strawbyte waste side jigs - thanks Karl! - bit.ly/Strawbyte_jigs
Hinge drilling guide - amzn.to/2oYBHqk
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bessey Duo Klamp - amzn.to/2tsSWQs (US:amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool T18 drill/driver - amzn.to/2QAHpK1 (US: amzn.to/2RPuOCR)
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
+++++++++

Пікірлер: 738

@garychadwick1240 3 жыл бұрын

I have watched all of your videos and learned so much. Not a second of my time was ever wasted. A genuine thank you!

@10MinuteWorkshop 3 жыл бұрын

Thank you! 🙌👍

@geromemezo1277 3 жыл бұрын

Haven't watched all of them, still working my way through, but couldn't agree with you more when you say '' Not a second of my time was ever wasted '' A great bit of luck finding this channel for me. Cheers

@romalanmoodley8504 2 жыл бұрын

i couldn't agree anymore to your message

@Viken43 3 жыл бұрын

Finally Mr M shows us weekend woodworkers how to produce domino style accurate joints at beer money prices 😀 ... This is why I subscribed to the channel

@10MinuteWorkshop 3 жыл бұрын

Thanks Kevin! 👍

@bighands69 2 жыл бұрын

Unless you can reference of the edge of your panel or bit of wood it is impossible to use those little jigs accurately.

@billmckillip1561 3 жыл бұрын

I bought one of those about 20 years ago at a flea market for a dollar. I never did figure out how to use it properly - now I know. Thanks!

@10MinuteWorkshop 3 жыл бұрын

Thanks! 🙌👍

@iankearns 3 жыл бұрын

With years of using dowels in the past I never knew that about using the notch on the dowel guide when doing a T joint. Every day is a learning day. Nice work Peter!

@10MinuteWorkshop 3 жыл бұрын

Thanks Ian! 👍👍

@RobertLuciani Жыл бұрын

I had the exact same "ahhhhhhhhhh ok" moment.

@paulwaite6777 7 ай бұрын

Same, fantastic!

@williamjrcartwright 6 ай бұрын

Me too! Feeling very stupid now!!

@markkoons7488 3 жыл бұрын

At the moment you have a 99.7% approval rate of this video. You've earned it. Thank you.

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍👍

@patricksmith4424 3 ай бұрын

Thanks so much for this video, I think I now know how to use a dowel jig! The using the point of the drill bit to mark is especially useful.

@Lorofol Жыл бұрын

Thanks Dad- I mean random guy on the internet

@williamfotiou7577 2 ай бұрын

Great video, some new ideas and techniques. Thank you.

@823Steve Жыл бұрын

The "quick tip" at the end was super excellent!

@10MinuteWorkshop Жыл бұрын

Glad it helped! 👍

@productiontouring9884 3 жыл бұрын

A link for this video should come with every dowel jig, great job PM.

@10MinuteWorkshop 3 жыл бұрын

Now *that* would get the viewing numbers up! Thanks! 👍👍

@dannycampbell6223 2 жыл бұрын

Brilliant videos, love your channel Peter.

@10MinuteWorkshop 2 жыл бұрын

Cheers Danny! 🙌👍

@ilanfono 2 жыл бұрын

Excellent explanations, loud and clear! Great photography and editing. Thanks!

@deanowright359 Ай бұрын

I have been meaning to buy a dowel jig , just a hobbyist, this is a great alternative to the festool .

@sylviajoiner9196 2 жыл бұрын

Thx for sharing. Very easy to follow.

@emjay9323 3 жыл бұрын

Super helpful for me. Thanks for posting this video!!

@garypautard1069 Жыл бұрын

Thanks Peter . I bought the Wolfcraft jig and was having no luck with its use, despite a KZfaq demo video. Now I can see why. Thanks.

@alastairmackay4589 Жыл бұрын

Great tips. Such a clever little tool!

@MrChilensko 2 жыл бұрын

Thank you so much. Greetings from Spain.

@duncanmaddox6688 Жыл бұрын

Exactly what I was looking for today! Thank you for putting this video together two years ago Peter, it's still providing value!!!

@vedionl Жыл бұрын

Thanks Peter for these tips. Just what I needed, everytime!

@neilrichardson9939 Жыл бұрын

Always learning from you,Thank you

@tonymatthews1 4 ай бұрын

It’s the first of your videos I’ve watched and really enjoyed it. Cheers

@10MinuteWorkshop 4 ай бұрын

Thanks, and welcome! 👍

@dustinmoore1825 3 жыл бұрын

Exactly what I needed to see before deciding which jig to buy. Always helpful and spot on.

@fonzhotproperty2463 2 жыл бұрын

Excellent video as always.

@setyawanlatif8520 2 жыл бұрын

Thank you Peter, very simple & clear explanation.

@StrzalaOstryPazur 2 жыл бұрын

I just already purchased. Must have in the workshop. Thanks 👍

@MJR91 Жыл бұрын

Great video Peter, very helpful!

@Neo.Picard Жыл бұрын

That was a great video, it was certainly far better than the other videos I watched on installing dowels. Thank You. ❤

@sohailkhan-vh2fc Жыл бұрын

Excellent video, to the point, thank you

@TheEcorristine 2 жыл бұрын

Another excellent video -as always

@nobbykat12 Жыл бұрын

Great Video and helped me along with my latest project! Thanks.

@steadymovie 7 ай бұрын

Thanks a lot! I just learnt how to use this tool!! Brilliant!

@derekhawley9660 Жыл бұрын

Blummin' brilliant Peter ... thank you so much. Just bought the jig, using your link.

@The6thSyd 2 жыл бұрын

Made my next project so much easier. Thank you!

@1hjehje 2 жыл бұрын

An excellent video ... Thank you!

@rh9915 3 жыл бұрын

Good stuff. I have had this jig for years and never knew about the t-joint alignment trick.

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@michaelbedell6523 2 жыл бұрын

Great presentation and ideas

@stevesiefken6432 3 ай бұрын

Good tips! Always learn something useful from your videos! Thanks!⭐️

@MrLeram12 3 жыл бұрын

Very good hints. Thanks.

@khanos73 2 жыл бұрын

Really one of my favourite video about the Dowelling Jig, you covered everything

@roger55es 5 ай бұрын

A pleasure to find & learn great tips to complete accurate joints Thank You

@abdulkhaliqalsaif8883 2 жыл бұрын

Great point learned from this, thanks Peter

@sophiescyclingandwalkingch4294 2 жыл бұрын

Thanks, great clear communication. I intend making drawers to go under the counter in my allotment potting shed and found this tutorial helpful.

@hwym59 2 жыл бұрын

Well done directions. Made it very easy to understand. Thanks

@richkurtz9187 3 жыл бұрын

Thanks a ton. I was given one of these and I had no idea how to use it. Perfect! Many thanks again

@Litehamer 6 ай бұрын

Thank you for an amazing video. I will be giving the a try in order to make a few basic cabinets

@stevenjordan6389 2 жыл бұрын

Thanks for keeping it simple.

@gandatube 2 жыл бұрын

Just stumbled on this one and I'm now going to see the others. Very pleasant and very complete. Thanks.

@manodetigre 9 ай бұрын

Fantastic video, thank you!

@mikeeccleston8620 Жыл бұрын

Brilliant! Video. Had one for years but never understood it until now? Well done.

@peterhughes324 4 ай бұрын

What an amazingly informative video - has made me feel a lot more confident using dowels to construct stuff. Many thanks and you have a new subscriber!!

@10MinuteWorkshop 4 ай бұрын

Thanks, and welcome! 👍

@timberlandhomefurniture5812 Жыл бұрын

Thanks sir it's really helpful Just yesterday I bought this dowel but don't know the way of use you explain in a very nice way its helps not only perfect joints also faster then ever

@paulsnow2347 3 жыл бұрын

Great video and thank you. I just bought one of the Wolfcraft ones and the tips and tricks will come in very useful.

@lennytheleopard 2 жыл бұрын

Excellent as always Peter.

@timwoods9350 2 жыл бұрын

That was super helpful!! Thank you!

@Eyespy11 Жыл бұрын

Very informative, thanks!

@timgoodliffe Жыл бұрын

droping the drill bit is such an easy tip i cant believe i never thought of it. Thanks!

@georgeheredia3230 Жыл бұрын

Very informative I enjoyed it thank you

@007380 3 жыл бұрын

Very educational video. Thanks for sharing your knowledge.

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@zebraskindiva 2 жыл бұрын

Brilliant video, just got a metal dowel jig, cannot wait to try after watching this. You are the best❤️❤️❤️👏🏻👏🏻👏🏻👏🏻

@fisioserv 2 жыл бұрын

You, are a great teacher, cause you seem to enjoy what you do.... many thanks from Malta

@ChickenDinnerz 3 жыл бұрын

I can't believe how useful that jig is. Especially the t junction method.

@10MinuteWorkshop 3 жыл бұрын

Yes, very! Mighty impressive for a pocket-money jig. 👍

@snackey10 Жыл бұрын

I learnt more of this video than i have the last 10 videos. I can actually make a straight dowl line up. Thank you for this video. I have had that tool for a long time and could never make it line up straight. A++++++++

@jarvex Ай бұрын

Thank you sir, direct to the point as I like.

@gwauk205 4 ай бұрын

I have this exact jig and have never used dowels or a jig before. This was perfect. Thank you 🙏🏻

@philipgriffiths7129 2 жыл бұрын

Thanks for your video best I’ve seen so far excellent

@10MinuteWorkshop 2 жыл бұрын

Thank you! 👍

@dmoehling Жыл бұрын

This video made this process effortless! I love learning how to join wood without using fasteners. Gonna get one of these jigs and start practicing this.

@davidmcgrath6507 6 ай бұрын

Beautiful! Thank you

@lisacruz5185 Жыл бұрын

Thank you so much I’m very new to woodworking and ordered one and had no idea how to use it and thanks to your video I have no problem! Thanks again your video was very helpful and easy to follow along with

@billk8780 3 жыл бұрын

Peter, Thank you so much for your videos. I used panel joints quite often this winter whilst constructing nesting boxes from rough-sawn cedar planks. Did so to give me the wide dimension which is hard to find with cedar lumber. Cheers from Michigan, USA.

@chrisholt2474 Жыл бұрын

I had my dowel jig on order, then found your film, brilliant thank you. When the jig arrives I now had a good idea how to use it, a fantastic film, much appreciated. I’m now also a new subscriber to your channel, perfect, kind regards.

@michaelkelly3356 3 жыл бұрын

Just the instructional video I needed. Thanks again for adding to your library of how to videos. Brilliant

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍

@ice4142 3 жыл бұрын

Thanks Peter will be using these tips tomorrow

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@brettbarager9101 Жыл бұрын

Good vid. Straight forward and easy to follow. I got one of these jigs a couple years ago but could not figure out how to use it! Now I'm gonna be jigging my heart out! Lol

@Ploggy. 3 жыл бұрын

Excellent video Peter extremely helpful thanks for posting 👍

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@stuggit 3 жыл бұрын

Very useful tips Peter, thanks & great video as always.

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@osagiermd17 Жыл бұрын

Thanks it's was very clear and precise

@roberthillard6706 6 ай бұрын

Wonderfully explained and demonstrated Peter, I've had one of those dowel jigs for some years and never got to use it, now i feel confident to try it. Thanks.

@derekpercy7787 Жыл бұрын

Thank you so much for sharing! What a Champion

@10MinuteWorkshop Жыл бұрын

Thank you! 👍

@raysstuffz Жыл бұрын

This was really helpful, thanks a lot. Subscribed🙂

@petersonmwaura7745 7 ай бұрын

Good tutorial sir... keep up the good work

@nigeld8694 Жыл бұрын

Great tutorial thanks!

@AlfredoReyes-dj4pr 2 жыл бұрын

Gracias, buen trabajo

@ChristianN- 3 жыл бұрын

Useful video as always Peter, thank you!

@10MinuteWorkshop 3 жыл бұрын

Thanks Christian! 👌

@myerscok 11 ай бұрын

Thanks Peter, another wonderful basics video. I’m just about to L joint on a project. I’ve had a dowel jig for a good number of years but I thought I’d look up a ‘how to video’ just to make sure I wasn’t missing a trick. I naturally went to you video first and was not disappointed to find I’d missed a couple of tricks not just one. The notch on the side is new to me, also not using a Brad point drill bit was good to know about. Please keep up your superb content they make every day a school day. Ken Myerscough, Southport UK 👍

@charlottehewson9522 2 жыл бұрын

Just bought a dowel jig and it didn’t come with instructions so, so glad to stumble over this vid. Very clear and helpful guidance. Thank You so much for your honest presentation :)

@fabiomerlin8820 Жыл бұрын

Yes, I really enjoyed your explanation. It'll make my life a lot easier when it comes to drilling for those pieces to match...

@pazt9911 3 ай бұрын

Best video I've ever seen!! Amazing

@gilesfone 3 жыл бұрын

Thanks so much for 14 mins of great instruction. You are right up the top of an extensive list of make and do subs I have and I think you are getting better despite your great back catalogue and long experience, that takes some doing, and you are doing it. All the best 👍

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍👍🙌

@BeauChampion 3 жыл бұрын

That was really well done, Peter! Every time I watch a video like this one I feel that I'm picking up ideas that will help me increase precision beyond the task at hand - like the brad point bit for alignment.

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍

@pteddie6965 3 жыл бұрын

You have a clear gift for offering up clear and easy to understand directions. Thanks for this video.

@10MinuteWorkshop 3 жыл бұрын

Glad it was helpful, thanks for watching! 👍

@philwebb8049 3 жыл бұрын

Another great tips video Peter. Thank you for sharing

@10MinuteWorkshop 3 жыл бұрын

Thanks Phil! 👍

@paulrowley71 3 жыл бұрын

Thanks Peter. I’ve got a Wolfcraft jig but it’s languishing in the toolbox as I bought a Kreg pocket hole jig system. Probably because I hadn’t seen many KZfaq videos on how to use the dowel jig properly. Thanks for the pointers. I’ll have more of an idea now and can reference back if I do a few dowel joints. Many thanks. 👍🏻

@bigmonkey999888 3 жыл бұрын

Hi Peter, the more the merrier! Every time I watch your videos I learn something new. Keep up the good work thank you Steve

@10MinuteWorkshop 3 жыл бұрын

Thanks Steve! 👍

@Rwjudy48 2 жыл бұрын

Peter, thank you. The clamping tips addressed my concern with trying to handhold the jig and drill the hole at the same time.

@clarkeysam 3 жыл бұрын

I'm not sure I've ever done any woodwork (other than a few weeks at school) yet I've watched countless hours of your videos and enjoyed them all.

@10MinuteWorkshop 3 жыл бұрын

Glad to hear it, thanks! 👍

@glennryzebol4472 3 жыл бұрын

Good stuff Peter. Thanks

@10MinuteWorkshop 3 жыл бұрын

Thanks Glenn!

@samcarothers442 2 жыл бұрын

Great stuff. Thanks.

@mrhdurban-jackson5716 2 жыл бұрын

Just bought the jig. Presumed I'd be able to work it out as I am a D&T teacher but having just watched the video I would have missed half the benefits and such clever simple tips that will make it so much more useful. Thanks very much, I'll pass them on to my pupils.

@10MinuteWorkshop 2 жыл бұрын

Thank you! 👍