No video
Cadillac ATS-V big brake upgrade on the C5 Corvette FRC project &
Рет қаралды 2,159
Күн бұрынA quick overview of the Cadillac ATS-V big brake upgrade on the C5 Corvette project & final prep of the body panels before getting them sprayed today inside the portable Vector parts painting spray booth!
Not touching much in the painting aspect as it’s the same for everything that gets shot and it’s in a bunch of other videos so go check them out.
Links to items shown in the video.
C6 Z06 front Rotors. www.amazon.com...
Vevor portable spray booth. www.amazon.com...
Those super fancy Dickie’s coveralls that are stunningly sexy, get em right here.
amzn.to/3vZgaPw
@YellowJacketGarage Жыл бұрын
The boy in the bubble...🤣 I "need" one of those too. Looking forward to seeing what machine work is required for those brakes too, that's a hell of a mod!
@JWsGarage Жыл бұрын
I’m so excited for this mod!
@YellowJacketGarage Жыл бұрын
@@JWsGarage you and me both!
@Teal2nnr 9 ай бұрын
How much to you need to take off of the caliper? I would probably just machine it down a bit. I don’t have my car home for winter to mock it up, so just trying to get an idea of how much to remove.
@JWsGarage 9 ай бұрын
Very much dependence on the machine spacers you use but I would say .030 to .060
@Teal2nnr 9 ай бұрын
@@JWsGarage ok thanks! I appreciate the response. I was debating running Wilwood Aero 6’s but it looks like I could put this together for about half the cost (or less) with 2 piece rotors. Might even just run blanks to start to see how they are on track.
@JWsGarage 9 ай бұрын
@Teal2nnr if I were going to the track I would definitely go 6 piston front 4 rear. These are good for the occasional local track day and street performance but not a dedicated race caliper with out the rears.
@dahliavaldeon4401 Жыл бұрын
🙌🏻🙌🏻🙌🏻🙌🏻
@JWsGarage Жыл бұрын
How’s my fav person?
@maxxpennington Жыл бұрын
More info on the brake kit plz !
@JWsGarage Жыл бұрын
There is another video on the brakes with all the info.
@vernonchristian3840 Жыл бұрын
'Promo sm' 😎
@fuckfordfrank6186 4 ай бұрын
Will this setup fit a C6 corvette? And also are those calipers same as c7 base corvette Brembos?
@JWsGarage 4 ай бұрын
Fit a C6 yes, same as C7 no.
@SargentandGreenLeaf 10 ай бұрын
I hate this putting Cadillac shit on a corvette, seems wrong
@JWsGarage 10 ай бұрын
Can’t disagree but there’s a ton of Lotus and Mercury Marine engineering in Corvettes since 1984 so 🤷♂️
Cool Items Official
Рет қаралды 21 МЛН
Rob Dahm
Рет қаралды 353 М.
VetOnVettes757
Рет қаралды 4 М.
driving 4 answers
Рет қаралды 1 МЛН
Fatal Garage
Рет қаралды 2,7 М.
RacerX
Рет қаралды 115 М.
Mile High Misfits
Рет қаралды 35 М.