Can I Do A Diesel Swap, What Do I Need & What Will It Cost?

Рет қаралды 866,476

8 жыл бұрын

We've been getting these questions a lot lately: What will a diesel conversion cost, and can you do the diesel swap?
Why it's $10k:
- 6BT is ~$2000 + $1500 for basic rebuild (head, pistons, rings & bearings).
- 4BT is ~$3500 + $1500 for basic rebuild (head, pistons, rings & bearings).
- Adapter plate, flywheel and starter is ~$2000.
- Shift controller is ~$600. kit.com/debossgarage/parts-mat...
- Alignment fluids, fittings, hoses, machining is ~$500.
- DG shop rate is $65/hr at an estimate of 70 hours.
- Don't forget shipping + taxes!
For more specific conversion part pricing & info, check out www.dieselconversion.com/info...
Watch our builds: / @debossgarage
Never forget another measurement. tapeboss.com
Support us on Patreon. / debossgarage
Get some merch. shop.spreadshirt.com/debossga...
Follow Rich on Twitter. / debossgarage
Follow Rich on Instagram. / debossgarage
Follow Rich on Facebook. / debossgarage
Follow Rich on Car Throttle. www.carthrottle.com/user/debo...
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
"Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.

Пікірлер: 773

@DEBOSSGARAGE 6 жыл бұрын

If you have swap related questions, best thing to do is join our Facebook group! It's a better platform for new questions and lots of experienced people there to help. facebook.com/groups/debossgarage

@adamproctor6044 6 жыл бұрын

I have been looking to swap a 12v or 4bt into my 2004 gas ram 2500 and can’t seem to find any videos or any real info on how to do the swap I don’t care about keeping stock gauges but I would like to keep my power windows and ac also does 10k include an engine and tranny or is it 10k+ the engine and tranny thanks for the good info you provide even if you don’t get back to me

@MehdiKiawer 5 жыл бұрын

how the emission going to work ?

@leonardogalindez7933 5 жыл бұрын

DEBOSS GARAGE how much to swap a cummins into a jeep

@jacobsmart9583 5 жыл бұрын

Like he says probably about 10k

@dillonh321 5 жыл бұрын

Should I do a R2.8 cummins or a 4bta 3.9 cummins? A 4bta is cheaper but doesnt have as much power.

@A1soldiersaint 5 жыл бұрын

I swapped my underwear this morning for a clean pair. It took a lot of hard work but I did it all myself and it cost less than $10k.

@JohnDoe-mh8tm 5 жыл бұрын

I doubt it was worth it. Maybe if you did it yourself.

@scottchapman8044 5 жыл бұрын

I did the same thing my girlfriend help me

@Ybsjek 4 жыл бұрын

🤣🤣🤣

@jessebolles3661 4 жыл бұрын

If u turn it inside out it will last u another 4 days lol

@reed7562 Жыл бұрын

@@scottchapman8044 Such a virgin nobody’s falling for that.

@rogerelkins5206 5 жыл бұрын

Can you do a series on doing a 12 valve cummins swap on a square body Chevy

@maxwellmillette5759 4 жыл бұрын

Yeah I second this, ive got a square body and ive tossed around the idea of that

@keatonsmith793 4 жыл бұрын

Plz do this this is what I’m wanting to do , 1986 square body Chevy and I want to put a 12 v in it

@nash-xn1no 4 жыл бұрын

do itttt

@teebugg66 3 жыл бұрын

I’ve got an 86 Chevy m1028 military truck I want to 12v swap I’ll let you borrow it if you need one to use in your videos! Lol

@sostrucking 3 жыл бұрын

There was a guy south of Iowa City is selling them at a decent price...not rebuilt that is. Not sure if he is anymore.

@johnnysanchez9031 6 жыл бұрын

I like how you got right down to it without beating around the bush.10k ballpark is not bad at all especially if its going on a truck you plan on keeping for a while. This is the first video of yours I watch, but you have definitely gotten my attention. I am definitely subbing to your channel.

@717UT 7 жыл бұрын

Thanks for sitting down and talking through the real world complications of this kind of project. I think almost anybody that's a car guy is hot and bothered over 4BT swaps. I sure am! But I know I'll never have the resources to accomplish it. But I love these videos and I love watching and learning. Who knows, maybe getting to see how it's done will help me learn down the road and do something cool too.

@someginger6996 5 жыл бұрын

In all honesty, 10k isn't that bad to do a diesel swap.

@AllPainNoGains Ай бұрын

I'm guessing it's probably more like 15 to 20 now with trumpenbidencovidflation.

@skrewdreyever 6 жыл бұрын

Thankyou! This is just what I have been looking for! I look forward to following along and learning as much as I can!

@bb_gunbandit4782 10 ай бұрын

Funny that I'm watching this considering I'm about to swap a John Deere 4045T into my 2005 F150. It's also getting a G56 manual and axles and suspension from an F350. Transmission and transfer case been freshly rebuilt, motor is brand new and has some extra parts to put some pep in her step, axles also rebuilt. Tearing the truck apart completely and rebuilding everything so every square inch of the truck will be in pristine condition.

@adamm4056 7 жыл бұрын

Just wrapping up my 5.9 gas to 12 valve swap, total cost of the swap was around $4,500, including little odds and ends, engine crane, plywood, and the hundreds of hand warmers because of a Pennsylvania December.

@austinatkins408 5 жыл бұрын

Adam Moldovanyi how is it running a year later??

@Kyle_Godfrey111 5 жыл бұрын

Adam Moldovanyi update?

@joshuakunze8930 4 жыл бұрын

Yes I am also curious

@campervanbug7658 2 жыл бұрын

Labor costs and such

@adamm4056 2 жыл бұрын

5 years and 100k miles later it still runs and drives and has survived starting a family, from hauling firewood to 10k lbs of scrap. A few things here and there but nothing out of the ordinary and it wasn't hard at all. I was 18 in this comment^

@sean3223a 8 ай бұрын

Totally understandable, great video, as a farmer in Alberta I put a 4BT in our 1984 Stackcruiser which has been excellent and (almost) trouble free since, and a 6BT in our 70's International tractor that we use for running augers and misc stuff here, thanks in part to your great videos. Thank you, warmest regards to you and yours.

@Gene4666 Жыл бұрын

Nice to see that there are still techs out there who have integrity.

@OnlyTheEd 8 жыл бұрын

I am impressed. So much so, that I hit the "subscribe" button. Thank you for explaining a lot....

@subcummins0134 7 жыл бұрын

Well said. Thank you for all the well thought out videos.

@michaelsmith296 4 жыл бұрын

Thank you. This is very interesting and very informative.

@kodyhalo2 8 жыл бұрын

I have a 1970 bronco and got myself an old grumman step van with a 4BT in it and have been dreaming of doing the swap for some time. it runs great and has been a nice moving shed lol. watching your videos has sparked that fire again... keep on doing what your doing man. i may have some questions for you if i can get the ball rolling.

@OnlyTheEd 8 жыл бұрын

Your main areas (probably) will be the electrical connections and the driveshaft changes/modification. (Please note Johnson's Gee-rage and "Todd Booke's Bronco swap).......His has the 4BT and a 5 speed (m5odr2, I think).....Jimmy (Johnson's Gee-rage) has a 1982 F150 4BT with the m5odr2....he's been building it for perhaps 2 years. His cash outlay has topped $6K, because he's had some issues and other modifications/ additions. He has done most of his own build except the driveshaft modification, and had help rebuilding the m5odr2. Otherwise, Rich is your man.....The $$$ I speak of is US, of course....Canadian is a different exchange rate. Oh yeah.....also the engine mounts/pads/whatever are going to cause grief.......And oil pan location, maybe....

@jeffreybrewster7434 4 жыл бұрын

You’re a big help thank you for the videos. 🤙🏼

@newfwheels2965 6 жыл бұрын

glad i subscribed and following, you are a the best informative and experienced. Keep up the good work. Cheers

@jaigrazette9457 7 жыл бұрын

really apresheate the honesty and realistic attitude of this channel

@dakotahwest1 6 жыл бұрын

JGMetal Jedi Appreciate*

@SalandFindles 6 жыл бұрын

+JGMetal Jedi Appreciate**

@badboybootz8 6 жыл бұрын

Lmaooooo

@TheThotWhisperer 6 күн бұрын

6 years later but man I hope your spelling got better lol

@garycook3612 7 жыл бұрын

Love your channel and am a subscriber. Always look forward to what Frankenstein you're building. I'm about to start a Bt6 in an 04 crew cab that has a Duramax. The motor went down after 296k miles and I'm not replacing that. Already have the Cummins block machined and ready to go forward. Only new the adapter plate and rebuild kit. Gonna lean on your videos pretty hard for the conversion brackets and hopefully make my own videos of the hurdles as well as the triumphs. Thanks again and looking forward to your next vid!

@DEBOSSGARAGE 7 жыл бұрын

Thanks. Feel free to ask anything you are having trouble with and send me the links to the videos as soon as they are up!

@garycook3612 7 жыл бұрын

Thank you, sir! Will do

@lanedj801 5 жыл бұрын

It can also affect your weight so expect suspension or brake changes if your vehicles motor weighs less than your new one. Last thing you want is to hit the brakes and the vehicle dips the wrong way.

@66blacksunshine 7 жыл бұрын

OH AND THANK YOU FOR THE VIDS... THUMBS UP. NEVER STOP BUILDING.

@Jursaw 8 жыл бұрын

You should do more videos on working on a cummins engine, maintenance stuff.

@uniquehomecustom 7 жыл бұрын

I like the honor,honestly, and the work ethics. just subscribed. I am sure this will be a awsome channel due to the blue on your color and the grease on your hands. looking foward to your videos thanks

@nickkoski7076 6 жыл бұрын

i did a cummims conversion.. i made all the factory dodge parts... hoses,intercooler,radiator,ect ect.. think they where still in the doner... its the only way to go.. get a complete doner and make it work. for instance.. getting the intercooler to fit in my radiator support took 2 days to measure... think about it... measure again. then cut.. worked perfectly.

@Theunitbth 7 жыл бұрын

Hey their DEBOSS really enjoy watching your videos! I have a 2000 chevy c/k 3500 dually 4x4 manual trans with the 454 big block and was wondering if it's possible to do a diesel swap in it? And witch diesel motor would you recommend? Thank you

@davidhoover8862 3 жыл бұрын

You answered my questions.. Thank you

@bigfoot7603 6 жыл бұрын

Great video man

@CHOPSHOPUNDERGROUND 7 жыл бұрын

Good vid. Good info.

@brydonbrubacher5335 6 жыл бұрын

Is it possible to swap a 4 cyl gas to 4 cyl diesel in a car? And do you know (in general) what typically needs swapped along with the engine?

@johnmarriage7246 2 жыл бұрын

I swapped a 6.925 litre udfe6ta into a 1989 4x2 f250 used everything out of a 1997 coffee 88 truck motor clutch 6 speed box.been using it for 5 years everyday ,does hard work.super reliable. Most Japanese diesels red line at over 3000 rpm .pulls like a bull

@regison6155 4 жыл бұрын

Dude I love your videos I learned a lot from your videos of dude great work

@leifchurchill 8 жыл бұрын

do a jeep cummins swap!

@pointvillage16 7 жыл бұрын

yes please!!!!!

@killionairmen 7 жыл бұрын

yes!!

@TonyLing 6 жыл бұрын

Nah, Perkins or a modern Merc

@samuelgriffin8371 6 жыл бұрын

Jeep liberty 4BT

@chevymetrodriver 6 жыл бұрын

Samuel Griffin i have a liberty lol

@mitchhouge8427 8 жыл бұрын

honestly this channel is so professional for 8000 subscribera

@1922DPenny 4 жыл бұрын

Mitch Houge 407k, 2020

@ukrarex 3 жыл бұрын

500k apr 2021 Well deserved

@JohnnyReyGonzalez 3 жыл бұрын

519k June 29, 2021.

@-ouv 7 жыл бұрын

Had a few 99 24v, and I got a 08 mega cab 6.7 Cummins and blew the 68 towing so got a nv5600 out of a 01 cab and chassis truck, bigger input shaft and I swapped that. I also got a 2003 2500 4 door short bed but it's a hemi and gets 6 mpg sith premium. I'm thinking of swapping that with a 12v and nv4500 or nv5600

@federicodenovi8862 7 жыл бұрын

Just finished a 4bt swap in a bv 206 hagglunds with a 3 speed manual transmision.. made all the part my self including the shifter and linkage... very cheap swap!

@Pinchegalloo 3 жыл бұрын

How do you even make “parts”

@ProMountainBiker 7 жыл бұрын

I've got a 2006 Dodge Durango with a 4.7l, I was just wondering do you think I would be able to fit a 4bt or 6bt cummins in it? Thanks, I love your videos. I don't live too far away from you

@justincook4069 5 жыл бұрын

I would like to know what you would charge to put a 5.9 cummins in a 1995 1500 z71 with 3/4 front and back axles and the trans and transfer case

@jacksmith3189 6 жыл бұрын

I enjoy your channel Kudos

@Eatmydick666 4 жыл бұрын

Love your feedback on putting your name on what you touch, lot of people don’t take pride in what they do and just takes peoples money. I have an 06 mega cab gasser 1500 2WD at 90xxxx miles... I’m debating on buying a $5k super charger on a gasser or get a Cummins swap.... diesel obviously for a truck that sits on a 2500 chassis is ideal to have a Cummins.... what do you suggest and if you sell my gas block what I would be looking at for the Cummins swap

@pablomarquez4431 4 жыл бұрын

Hey rich. I was looking into building a little hauler to transport my vehicle when needed or pull stuff around. My 4.0l jeep grand Cherokee dont cut it. I'm a postal mechanic and fell in love with the Cummins engines since they were very reliable and barely in the shop😁. So I was considering making a pick up or suv with a 4bta engine. Is that good for a budget build? Or is the 6bt cheaper? Was considering a 90s ram 2500 but they are coming up in price. What body, engine and transmission do you recommend? Whats the easiest option. Im not going to have it as a daily. Just when I need it, something to beat up and ready to use when needed. Thank you for your time ✌

@tim2jz670 7 жыл бұрын

I had a 97 f350 that I 12v swapped. I did the work myself. Total swap cost me about 5k like he said.

@MrGLADIATOR5100 2 жыл бұрын

I'm thinking of an 8.3 or 8.9 swap on my 93 f350.

@nickvlassis7496 4 жыл бұрын

Hey Deboss- Just found a very nice rust free 98 Ram. Gasser. I see this is an old video, are you still doing Cummins swaps? Thank you, Nick.

@kmdvideos8208 5 жыл бұрын

I’m looking at buying a 4bt do you know anywhere I can buy the engine at a decent price they all seem to want 4K for junk

@moosediaz2005 8 жыл бұрын

I doing my jeep tj conversion got the 4bt for I just need the adapter play for the transmission I making the motor mounts is going to be f#/\€ awesome

@phtevenmolz5030 7 жыл бұрын

I did mine with an adapter from dieseladapters.com. it was super simple for the install. I did the swap in my 2002 TJ. all I can say is use threadlocker on everything and spend plenty of time mocking up the final placement of the engine.

@mdezee1 7 жыл бұрын

Came acros your channel and seen engine swap on Tahoe just blew my mind never imagined this was possible I would love to put a Cummings on a 2003 and up Yukon but would I get better gas mileage if so how much more don't know anything about Diesel engines but LOVE the power !!

@guyh.4553 3 жыл бұрын

Thanks for calling it straight. Very rare in this day & age where it seems like everyone else is gloating over their work. This was helpful. Grease on the face didn t hurt as well! Ha ha ha ha

@altaccout 3 жыл бұрын

You need to consume better media if you feel that way.

@onesecureone 4 жыл бұрын

I'm about to do one in in a 1980 ramcharger wish me luck

@omnipubgmobile1615 4 жыл бұрын

How goes the swap?

@lorenzovonmatterhorn4756 4 жыл бұрын

Bro post a video of that ram charger

@raffaeledimenza6167 3 жыл бұрын

Update vid ?

@DanielFerreira-kc8ix 7 жыл бұрын

I just picked up a complete 4bt with trans for 300

@208RedNeck 7 жыл бұрын

Daniel Ferreira lucky

@ryanhaverkamp4404 7 жыл бұрын

ill give you 1000

@webchar 7 жыл бұрын

they go for 4 grand where i live.

@edlingja1 7 жыл бұрын

Daniel Ferreira Don't buy a $300 combo you can buy a whole car for $500. Spend the money on a nice one with a warranty....

@webchar 7 жыл бұрын

u find me a truck with a cummins for 500 and ill buy it immediately

@kennyv6135 7 жыл бұрын

I did my 1978 f250 12 valve and Hell yeah! Its worth it almost 20 mpg instead of 9mpg. 10 grand is on the money give or take a few dollars. If you need a run down on a 78 or 79 let me know, Rock on!!!

@rubenulloa6755 7 жыл бұрын

what diesel engene fit on my jeep wrangletlr 2010?.

@kylewilliams7866 8 жыл бұрын

theres not many channels i enjoy watching, i love everytime i see you uploaded a new vid. keep it up

@DEBOSSGARAGE 8 жыл бұрын

Thanks! Its going slower than we hoped with subscribers but we are getting there.

@shawnsimmons8268 5 жыл бұрын

DEBOSS GARAGE if you EVER have a chance to do a 4bt swap into a Ranger, PLEASE do a video series. There are about 1.3 million Ranger owners that are currently lusting after a 4bt Ranger, lol!!!

@MrBmore20 5 жыл бұрын

Preach!

@smokey-mcpot-yr4ml 4 жыл бұрын

I got a e350 6.0l 2006 van can u talk a little about the differences between the f-series trucks and e-series van diesels

@Superbayman94 3 жыл бұрын

Always wanted to put a Cummins in my old 04 Honda Civic and have the turbo and whatever else just sticking out of hood. Sold the car because nobody here in Newfoundland where I’m at anyways can do something like you do

@keithreinert5835 7 жыл бұрын

Could you possibly discuss the common rail isb rear gear train 4bts that are now easily available. Swapping it to front gear train to be able to be swapped. Any other information about them ecu programming etc to swap! You explain things in a way I can understand and I would and a lot of other would really appreciate it!

@northwestcustoms6663 5 жыл бұрын

I'm planning something similar, but swapping the '75 Chevy crew cab body onto a '92 Dodge cummins frame. Figure the engineering that went into the dodge chassis will be better than making it fit into the Chevy frame. Just my thoughts and plans.

@sephtwentyone3382 4 жыл бұрын

Thx you. I was thinking of doing the swap on my 01 dakota to save some gas but part stores are few between here. With the 4bt, would it be able to haul the same weight?

@aubreystanley1124 5 жыл бұрын

I have a '94 Ranger. It has a very good 4 cylinder motor (8 spark plugs). I want to install a 302. I know I have to upgrade the 5 speed t-5. Can you recommend other updates?

@tacticalhomestead 6 жыл бұрын

any thoughts on what i can do to my stock 518 transmission to make it reliable as well as get the power to the ground? 1992 W250 4wd . shes pushing approximately 400 hp and 800 ft/lbs torque at the crank.

@WeThePeople2020 6 жыл бұрын

Fitment question. Do you think a 6bt will fit in a 2004 Crown vic?

@ehrenkrause9861 3 жыл бұрын

Always enjoy the content bud. Time to put one of the baby diesel engines in a caddy. 😊👍

@colonialroofingofnorthcaro441 5 жыл бұрын

I want to put a diesel in my explorer for a overland vehicle, which engine you think would fit in a explorer

@mikeallensonntag 5 жыл бұрын

So that 10g is for labor and fabricating and the small swap essentials. Every thing like big parts, engine all that is additional either customer provided or you source it I'm assuming for cost plus little on top?

@andreysergeevich2945 3 жыл бұрын

Good stuff

@hoseamatthews4527 6 жыл бұрын

Hey Mr.Deboss so I Have a 98 K1500 5.7 Vortec Extended Cab 3 door Silverado I recently Purchased it from a older Gentleman who had bought it brand new and had fallen ill and needed the money. The engine and tranny are all original. He had kept it in tip top shape with Transmission Fluid Flushes and Filter changes every 35-40k miles and Oil changes every 2500 Miles Wix and Kn filters were his go too he cleaned it up and sprayed off the snow in the wintertime so there isn’t a single spot of rust on the fenders as most fall victim too aswell as the vehicle does not burn a single drop of oil and has had all the gaskets replaced routinely. My question is I’m looking at doing a 6.5 or 6.2 Detroit Diesel swap or possibly buying a baby duramax crate engine and or just installing a 6.6 or possibly even a 5.9 or smaller cummins engine into it I just would like to get your thoughts on it!

@mottavator 7 жыл бұрын

Hi! I have a 2001 gmc safari that I would like to convert to diesel. It has a 4.3 vortec in it at the moment. Where do I start and what do I need to concider for the swap?

@samanderws9333 2 жыл бұрын

Hi I have a 02 golf stream Sun voyager RV and I want to put a 6.7 Cummins out of my 17 ram 3500 in it but I want wondering if it better if I put a 12v in instead

@JohnBraman413 3 жыл бұрын

what's total cost to do a ford ranger swap including exhaust? how long does it take for the swap? can truck be dropped off at the shop and picked up when done?

@phildrye7143 Жыл бұрын

Do you think it possible to do a 12 valve Cummins swap in a 55 panel truck. Assume I would need the whole drive train and can the axels be made to fit the 55 frame?

@jamespallag8133 3 жыл бұрын

Hello I put a 6354 perkins in a 1991 ford f350 made all the brackets myself did it in my backyard drove it 30,000.00 miles no problems

@michael-shanehenderson8562 Жыл бұрын

I have a 4bt in my 1968 C20 and would like to add Vintage Air. Where can I find a compressor mount bracket?

@michael-shanehenderson8562 6 жыл бұрын

Winnebago Brave with Dodge 4x4 frame w/ 5.9?can you do this?

@williegohard1368 2 жыл бұрын

What do you think of a Isuzu diesel swap for 2015 Nissan frontier King cab. I've been thinking about doing that. Like a small Isuzu diesel engine out of a small Isuzu box truck with the transmission as well

@thenewlife.pt2724 5 жыл бұрын

Also since I used to have a 5.7 hemi. And am doing a cummins swap. I would get a new ats transmission. But would I need new driveshaft and rear differentials? Or can i use stock 5.7

@Firelord360 7 жыл бұрын

I would like one in my 2009 F150 Fx4 that would be sweet let me know if you can do it and where to drop it off at

@ThatOnePriest 5 жыл бұрын

I want a 12v in my 2010 expedition running the 5.4 triton right now

@evilal20 3 жыл бұрын

Expeditions are damn near bulletproof. My grandma had one at 360k miles. My F150 with a 5.4, running at 290k

@Blske9758 7 жыл бұрын

How good would a 4bt and mpg? Thanks

@vergotiarteelyoyo2148 5 жыл бұрын

So what the best Cummins engine to go with for a swap?

@thomasschurter8982 6 жыл бұрын

How much work would it be to put a 5.9 Cummins with an Allison transmission in a 2008 f-450?

@munemrabadi809 2 жыл бұрын

good content, I have a 2004, f250 powerstroke 6.0. it has 350k miles. I did a head gasket at 310k miles and ran great for 40k miles. at the present time it needs another head gasket job. lower end is fine and has great power. I'm thinking of rebuilding the entire engine. I can't find genuine ford pistons and don't want aftermarket pistons. how wise is it to use the same pistons with 350k miles on them? thanks

@mauricionajera4286 5 жыл бұрын

The is clear my question is if what I need for swap my 5 cilinders chevy colorado 04 for a 4 cilinders engine

@alexharris286 2 жыл бұрын

Looking for a 12 valve for a 2005 f350 my 6.0 blew up again not putting a new one in ,

@jonsnow9405 4 жыл бұрын

I have a 1990 d350 12v I've ran into title issues. I just scored a 1965 Chevy C60 I'm trying to figure out what I need to do for wiring. I can make the engine crank and die.. what should I do about tach, water in fuel etc.. ? Is there any tips you can give me or video that might point me in the right direction? This is my first Cummins conversion. I can do gas burner conversion but 1st diesel conversion.. I have Dodge Manuel for diesel supplement just need pointed in right direction for now.. any in put would be greatly appreciated.

@Nostradamus_Order33 4 жыл бұрын

Questions 1) 6.4 PSD transmission needs what type of bell housing, SAE____?

@stanzingyaltson1280 6 жыл бұрын

As I have cummins 4BT diesel engine 9.8 engine fitted on my truck. It is 1992 model, now I want to fit a power steering in my truck so please guide me. Can I fit it in the old engine? Please show me the point at the engine and confirm the rate for a second hand power steering assembly.

@jackcaldwell485 7 жыл бұрын

can you do a solid axle conversion for a expedition and a diesel

@paulmiddleton4893 5 жыл бұрын

I have a 1998 nissan pathfinder se 4x4, I would love to do a diesel upgrade not sure which engine to use. Would love a Cummins 5.9, not sure if it would fit. Which engine would you suggest?

@dustinwalker8576 7 жыл бұрын

Deboss... I have a 70 gmc k10/k20 hybrid...(mix&match cab,clip etc) it is currently running and driving with a sbc and a 4spd manual... do u think 10k would be possible for a 12 valve swap?? Does that include all the plumbing,brakes hooked up etc?

@SmudgyContent 2 жыл бұрын

Hey wondering if I just got burnt… bought a 99 56block cummins nonrunning. I got the thing running but has a nasty knock. Looking for cracks yet to see any. Paid $1,000+ for the 12vcummins.

@rowdyyates4986 5 жыл бұрын

I have a 02 suburban and thinking about dropping in a 6.6 or a cummins. Which one would be more ideal

@georgeserrano3287 6 жыл бұрын

Can you put a diesel engine in a hot rod like a 32 ford or 28 dodge. That sort of set up as I have been hoping this to be an original idea to kick around. I would like your professional opinion on something like that as you are well versed in the swap business, and all it entails. Thanks for sharing your channel with the world. Hope to hear from you soon.

@christopherproctor1662 7 жыл бұрын

If you ever do a early 90's late 80's Toyota pickup swap please upload a video of it

@killstrees 7 жыл бұрын

I want to put a Toyota 1kzte in mine.

@BottlecapDwarf 7 жыл бұрын

Christopher Proctor i would to put a small Diesel engine in my Toyota

@BottlecapDwarf 7 жыл бұрын

*love

@killstrees 7 жыл бұрын

Unfortunately, these Toyota swaps aren't as plug and play as you would think, especially if it has electronics. I found that the wiring harness for the diesel is for a right hand drive truck, so it has to be rebuilt. Also, the gauges don't transfer either, from what I have found. Look up dieseltoys on forums. You will find pretty much everything you will need from those guys. I haven't done the swap yet, so I all I know is what I have read. I could be wrong though. I do know that you would be better off with a half cut which will have everything you will need.

@donaldplank54 7 жыл бұрын

I've done it it's a total b**** everything's easy but the wiring harness on the 1kz

@crashnburn3980 4 жыл бұрын

I met a guy one day that was driver I tracker or a sidekick can't remember, he had a 4 cylinder diesel engine in it. He told me it came out of a tugboat

@Lunatic_xx7 5 жыл бұрын

What if my truck just got the engine and transmission rebuild? Like today they literally just finished it but they gotta test run it🤔

@cbfall 8 жыл бұрын

Cool & Interesting!!!

@daviduruqi5507 6 жыл бұрын

I have 09 kodiak i wanna put cummins i like to know more about this if you can reply I'm very interested about this

@frankortiz1929 3 жыл бұрын

I’m trying to swap a izusu in to a 227 cat skidsteer I wonder how hard is going to be or if even possible

@curt714 7 жыл бұрын

Would it be cheaper on your end if it's a reman 4bt and new trans

@Ps-uv2kx 6 жыл бұрын

2005 chevy colorado with the 2.8 4 cylinder cummins?

@deadlydavem 2 жыл бұрын

I found a 15k mile diesel pusher motor home. It's an Allison/Cummins combo. Anyone know if the engine and transmission can be retrofitted into a front engine truck? I'm looking at installing them into a 1953 chevy 2 1/2 ton truck.

@FarDrizzz Жыл бұрын

I have a 73 f250 camper special, what transmission do i need if i put a 12 or 24 v in it

@TonberryShuffle 6 жыл бұрын

I get where you're coming from but the diesel swap I'm looking at is (probably) much simpler. an Isuzu 4jg2t into a 94 Isuzu Trooper (internationally known as a Bighorn). Outside of the americas the Bighorn (trooper) already came with the 4jg2t as an alternative to the gas engine. Will it be simple? no idea. I can't seem to find any information about it.