Can't Believe Im Doing This Again

Рет қаралды 27,183

Ай бұрын

Can't believe im a plasterer again, well only for the morning to help us second fix
Tradify link. bit.ly/3W3b96P
Get 10% off Rhino Trade Insurance using code BUNDY10 at www.rhinotradeinsurance.com/quote
Ansell gloves i wear kzfaq.info?even...
Use code BUNDY25 at unilite.co.uk/product-categor... for 25% off
Use code BUNDY10 at www.expertelectrical.co.uk for 10% discount
Join this channel to get access to perks:
/ @nbundyelectrical
This video is for entertainment purposes only and is in no way intended as a guide or 'how to'.

Пікірлер: 87

@medwayspark8244 29 күн бұрын

Con sen trick. Noticed Adam has fully embraced the easy life of wearing sliders while working, 🤣🤣🤣🤣

@tonyc7859 Ай бұрын

Nice to see the new Superdry safety sliders used by Adam

@Alfie-vp5xj 28 күн бұрын

Yeah

@amc8313 Ай бұрын

Nice PPE on Adams feet......sliders for the win

@JensenPGATourDriven Ай бұрын

It’s good to see you and Adam back on the job. I thought that you were working a couple of days a week together. Great content with nuggets of info ⚡️👊

@MartynSmith Ай бұрын

I'm certain you have done the plastering wrong. You are supposed to fill the back boxes with plaster aren't you?

@NBundyElectrical Ай бұрын

Ah sh*t I’ll have to go back and sort it

@haldo691 Ай бұрын

And cut those annoying long cables back😅

@adambrady7740 29 күн бұрын

oh no plaster is wrong who cares they stich us up daily

@adambrady7740 29 күн бұрын

oh no plastering wrong who cares them crack heads stich us daily😂

@idstewart1964 25 күн бұрын

No that's the job of professional plasterers, very technical leave it to them bud 😂😂

@steveday6104 27 күн бұрын

Adams footwear !!! Self employed life is suiting him.

@brianmckenna3440 Ай бұрын

Nice one Nick great to see Adam back

@billsbasementworkshop1902 Ай бұрын

Nice to see you and Adam back together. I notice that Adam was sporting the latest in safety footware.

@NBundyElectrical Ай бұрын

lol worst thing is I didn’t even notice until I did the video

@timhoward7037 Ай бұрын

I recently did the same myself with splitcon when a supply moved. The equivalent SWA was 10mm bigger in diameter. I quite liked it.

@user-DANWALKER1066 Ай бұрын

You can set the boxes intp the wall with bonding if you wanna get them all level makes it easier or you can’t get screws in. Sometimes the boxes are sunk too far into the wall from the chasing so as a tip you can set the box with bonding straight to the wall it’s solid! That way nice level boxes and flush with the surface. Nice tidy work 🎉

@paulbarnes1153 Ай бұрын

Just used 10kg bag of jointing compound from Screwfix for chase filling at it's a winner, doesn't slump or shrink and finishes smooth with one fill, no need to top coat. Worth giving it a try 👍

@ForTheBirbs Ай бұрын

I hope you and Ad had a cuddle in the van for old times sake, and off to his mums..... Sorry, Ad who? 😅😂❤

@johncarpenter5472 Ай бұрын

Split concentrate it's good cable easy to use

@benpye2102 25 күн бұрын

Hope those coils under the floor aren’t being made live until kitchen is done because that will get hot. Better call your mate eddy

@michaelrose9949 Ай бұрын

Brilliant vid great bit of banter between you all. Nyyj instead of the split concentric fairly flexible and uv for external?

Ай бұрын

Love spit concentric cable is brilliant

@TheChipmunk2008 Ай бұрын

yes, it's one of the few cases i disagree with the regs... it to me is a fully protected cable, L-N short will pop the breaker or fuse

@shaunlayden1499 23 күн бұрын

Adams wearing sliders 😂😂😂😂😂

@IanFarquharson2 Ай бұрын

Weird house. It looks quite modern on the outside, but 50 years old on the inside.

@tonywatson1412 Ай бұрын

PVA...yeah...also stops the dry blocks sucking the moisture straight out of the skim or bonding plaster.../ just a query , is there anything in bonding that reacts with galv. back boxes ?

@Alfie-vp5xj 28 күн бұрын

I am 12 and when I grow up I would love to be like you and have you as my boss because of the way you treat adam

@johncoe530 Ай бұрын

And Bundy Sunday continues😂😂

@donaldgould4976 Ай бұрын

What is Adam doing with flip flops on lol

@GavinTranter Ай бұрын

Contryentric 😂 Concentric meaning circles with a center. Loving these member videos and your smashing the uploads.

@NBundyElectrical Ай бұрын

Thanks dude

@1985tonyjones Ай бұрын

Haven’t seen the vid yet but is the answer, posing again? 😂

@jonathanstephens7804 Ай бұрын

fair play for the bonding. Not my preference as when the plasterer rocks up the new white points will be covered in plaster. Typical clients who can't wait for the proper plastering.

@hhelectrical3513 Ай бұрын

Been using concentric cable for years👍🏽got a video on my channel on it

@richrowley8355 Ай бұрын

Glad you're enjoying it again. Didn't see you as an MA fan!. Did he send you the Tee? Rewiring his new house?

@NBundyElectrical Ай бұрын

No mate brought me and the kids some stuff a while ago 👍

@Wills260101 Ай бұрын

Thanks

@NBundyElectrical Ай бұрын

Thanks dude 🙌

@Alfie-vp5xj 28 күн бұрын

I love your boots where did they come from

@timothycoles42 Ай бұрын

Hi nick, is there a reason why you dont put capping over your cables. Im not criticizing your work, you come across as a conscientious worker and I allways find your videos interesting, Its just Ive allways been told that you need mechanical protection plus the plaster can sometimes affect the outer sheathing of the cable. Let us know your thoughts.

@andysims4906 25 күн бұрын

Cowboy springs to mind.

@paulroberts-qr7qt 21 күн бұрын

Capping isn't needed, it's a personal choice to protect cables from the plasterer not plaster. It's in the regs.table 4A2 reference method C

@andysims4906 21 күн бұрын

@@paulroberts-qr7qt Yes but any professional electrician will still use capping or better still oval tube . When I was an apprentice it was drummed into me time and time again the line below. Don’t forget the regulations are the minimum standard required. After all if you got time to make videos and can’t be bothered to spend a little bit more time doing the job professionally that says it all.

@timothycoles42 19 күн бұрын

@@paulroberts-qr7qt Hi Paul thanks for the feedback. Im concerned not so much with the plasters effects, although I have allways been told that the plasters properties can dry out and crack the sheath over time, but moreso im worried about the effect of the PVA glue used to bond the plaster to the walls. May have to have a chat with my NIC assessor. think I'll stick with my capping or oval tube. cheers, allways like to get other sparks opinion on things.

@smithy2k13 Ай бұрын

As a plaster u don’t need to use pva be for bonding but in some case u mite need to do it but not all the time

@NBundyElectrical Ай бұрын

Thanks mate, rather be safe then sorry 👍

@paulduff9257 Ай бұрын

Sliders/ flipflops really on a building site typical of of kids these days. I work in engineering & my daughter works on cnc machines with no overalls or safety specs but they know better

@simbrit7970 Ай бұрын

Your better off just dusting down chases even maybe hoover them out and just use water not p.v.a. Pva can cause problems if chases still have dust in them because it just seals the dust to bricks and has no key.

@robinhadley Ай бұрын

How you getting on with the Kewtech tester ?

@NBundyElectrical Ай бұрын

Really like it mate, easy to use and doesn’t give me false codes

@welshkid12 Ай бұрын

Just out of interest, not a criticism what so ever just curious, is it okay to coil cables and leave them for a prolonged period? Just thinking in relation to leaving extension leads coiled up and then over heating.

@NBundyElectrical Ай бұрын

I would say the differences and extensionally is tightly coiled around a plastic drum, my cables looped around nothing and arnt tightly wound bud

@richardnewton5159 Ай бұрын

Could you have used ho7?

@NBundyElectrical Ай бұрын

Not really due to the possibility of Amy The screw directly through the live conductor, at least with split con or SWA. The live conductor is surrounded by other conductors.

@Alfie-vp5xj 28 күн бұрын

How is Adam wearing slides on a building site

@andyman1032 Ай бұрын

nick I'm in the damp industry you should use sand and cement and not plaster as plaster will act like a sponge and if the wall is suffering from any rising damp issues the plaster will act like a sponge and keep absorbing the damp and wont dry i have seen this multiple times and its just advise

@CraveThatCoin Ай бұрын

Only a issue for external solid walls (no cavity). I'm sure this house has a cavity

@uddaside Ай бұрын

What do you think about covering cables? capping etc? This debate goes on and on. I dont use it unless theres a specific reason

@acelectricalsecurity Ай бұрын

I always use oval tube, and when someone hits a cable you will be hoping someone put something on the cables to save hacking the whole wall out. I look at a job like that with nothing on the cables, and it looks rough, there's no debate, we cover cables to protect them from getting damaged by thick plasterers, and I assume a metal trowel is being used so they should have something on them.

@uddaside Ай бұрын

@@acelectricalsecurity Oval conduit is not going to stop a nail. And if youre filling the chases' whats the issue?

@acelectricalsecurity Ай бұрын

@@uddaside of course its not, i never said it would, if you read what i said you would see my point. its to stop cables getting damaged by metal tools used by plasterers, which is what you use to fill a chase, unless you have a plastic one, which i have never heard of.

@acelectricalsecurity Ай бұрын

@@uddaside and another thing that 80p oval tube will do is save your customer around £500, because on a recent job I did the customer hit a cable putting a picture up, the wall paper was £230 per roll, plus a decorator for the day, so around £500. I was able to get above it, pull the leg up and join another piece of cable, for less than £100 including vat.

@therealdojj Ай бұрын

is that a matt armstrong t shirt then?

@NBundyElectrical Ай бұрын

Yes mate

@scott4shell Ай бұрын

Bro you ever worried about asbestos working in old houses? I think about it all the time.

@NBundyElectrical Ай бұрын

Everything gets tested before hand, mate It’s a requirement I asked customers to do before taking on any project of this age

@iantaylor6858 Ай бұрын

Big hands...Happy wife

@NBundyElectrical Ай бұрын

Happy Adam’s mom

@UhOhUmm Ай бұрын

Seems weird to use PVA diluted with water when there is a special primer for plaster, it's not more expensive either...

@NBundyElectrical Ай бұрын

True but I’m not a plasterer mate, only doing what I’ve been show in the past 👍

@UhOhUmm Ай бұрын

@@NBundyElectrical Yeah, it's interesting to see. In Lithuania electricians put in the boxes, plasterers usually don't do it. Normally the cables get routed, holes for boxes get drilled then the walls get plastered and electrician comes back to put the boxes in and then painters finish the wall. So electricians do use all sorts of plaster/glue pretty much all the time.